MOVED: Msi Gt72 2PC Dominator, 2 issue's please help!!

This topic has been moved to GAMING Notebooks.
https://forum-en.msi.com/index.php?topic=258546.0

This topic has been moved to GAMING Notebooks.
https://forum-en.msi.com/index.php?topic=258480.0

Similar Messages

  • MOVED: MSI GT70 2PC DOMINATOR - HDD constantly 100%

    This topic has been moved to MSI Notebooks & Netbooks.
    https://forum-en.msi.com/index.php?topic=180329.0

    HDD typically are slow and laggy
    check HDD for errors, with diagnostic tools if its fine,
    then you can consider installing SSD & adding more RAM eventually

  • MSI GT70 2PC Dominator Battleship – EpisodeⅠ

    [Introduction]
    [Roberts  are the dream of every man] one of my close fellows said. Actually, I am not a 3C fans. But it is really excited that Titan Fall is online now. So I made a tough decision that I never did it before. I purchased the [MSI GT70  2PC Dominator] with last year bounds.
    [Open box article]
    Finally, the shipment is coming today. It is true that now is one of my happiest moment in life. I put down all my work and start to share my new toy for everyone.
    Note:
    It is sad that I only have a phone next to me. Please forgive me those non-quality and non-professional pictures in article.
    That is cool that we can find a big case with MSI log and an extra backpack in package.
    There is MSI log on the top of box. Furthermore, I must said the Dragon log is so fashion and beautiful. That is a nice backpack which we can carry it outside anytime.
    There is an extra soft layer behind the backpack. It improves the comfortable and air permeability  for user.
    In my own opinion, I like this kind of design.  
    Let’s check what surprise us in box.
    We could see the label of GT70 2PC spec on the side of box.
    MSI really provide the multi-protection for their products. There are two more cases inside.
    We can find MSI gaming mouse/ SteelSeries SIBERIA V2 gaming headphone in box. Besides, there is a small and special box which has MSI Log. We will check it later.
    All right. I think we can throw away the empty box now.
    Wait a minute!!! The box is still so heavy. It must be something else that we didn’t take out.  
    Oh well, I see. There is a warranty service book and driver CD in the right side.
    Also, battery and adapter are behind the cover.  
    Let’s take a family picture.
    We have quick guide/MSI rromotional materials/manual for F3 recovery/driver CD for Win8.1/Warranty service book/ Windows 8.1 guide
    Oh my god. There is a signet in that special box. Dragoon postmark is so elegant.
    SteelSeries  SIBERIA V2 Full-Size headset.
    Furthermore, it supports 4 different languages. You can find the spec on its box.
    Wow. MSI log is on the headphone. Totally, It is customized for MSI brand!!!
    Another dragon army log on headphone.
    MSI didn’t forget the inside of headphone. A beautiful shield is on it.
    SteelSeries also promote this headphone on its website. It is so popular.
    http://steelseries.com/products/audio/steelseries-siberia-v2
    Now, let’s show SteelSeries KINZU V2 mouse.
    Mouse supports 4 different languages, too. We also can find the spec on box.
    However, there is no driver CD in box…LOL. How do I use it? We only can find the cute mouse and manual.
    Sorry, my bad. We can download the driver and firmware from SteelSeries official website.
    http://steelseries.com/products/mice/steelseries-kinzu-v2
    Of course, there is a powerful dragon on mouse pad.
    Take a mouse family picture.
    180W adapter is just like a big strong brick. It is designed by most famous industry DELTA. You can find all kinds of safety signatures on it. It is powerful and undefeatable on playing game.  But please understand that I didn’t suggest dear readers to use it as a weapon to throw/hurt people!!!
    The battery is 7800mAh. And you can see all kinds of safety signatures on it.
    Finally, our rock star is coming.
    The laptop is surrounding by a lot of soft foams.
    Huge dragon shield log on it.
    Take off the black jacket. Then, we can see a nonwoven fabric inside the plastic bag.
    Game start!!
    This universe battle cruiser will help me dominate all my enemies in game .
    We can find the security lack/power jack/ RJ45 port/D-SUB/m-DP/HDMI in back. The sales man said it can also support three external displays at same time. I must try the solution by myself when I get my new screens.
    On the left side, there are USB3.0 port/Card Reader/HiFi headphone port (According to the spec, it will increase 30% audio performance). I can’t wait to listen my favorite music with it.
    I didn’t forget my lovely BD. It also has BD reader/writer and 2 USB2.0 on the right side.
    I can’t stop myself to take another wonderful photo with the MSI logo and upper case.
    I have a feeling that my dominator is ready fight.  
    There is a [SteelSeries] LOGO on the  left side. What a surprise it is. YA! We have SteelSeries keyboard on GT70. Absolutely, this is a gamer dream. Best Keyboard vendor SteelSeries and Top Gaming NB brand MSI are working together! It is totally worth for me.
    DYNAUDIO, the leader of audio industry. As you know, BUGATTI’s sport cars use the DYNAUDIO. And  MSI is the first notebook in world with this sound of Danish pride.
    HA!HA!
    I’m listening the best sound as rich people sitting in their sport cars. It feels great.
    http://www.dynaudio.com/int/multimedia_sound/index.php
    There are many thoughtful buttons on middle cover.  (Power/Airplane mode/display on&off/Gaming button/Caps Luck/Num lock).
    More convenience buttons, media/turbo fan/backlight LED.
    We also have Bluetooth/WLAN/battery/sleep/disk indicators in front of laptop.
    Here is GT70 spec and signatures form Sound Blaster CINEMA / nVIDIA /Intel.
    An independent On/Off switch for touch pad.
    Built-in Camera and Mic on the display.
    You can see the thermal design and the battery when we check the back side.
    The silver part is our bass. Just like the cannon on our battleship.
    What is under the battery?
    The left side is the safety signatures for GT70 and its WLAN.
    The right side is Win8 LOGO and serial number.
    Now we know my baby is born on February.
    [Power on]
    Gee!the Log is shining when the system is. power on .
    The keyboard is just like the most beautiful rainbow that I’ve never seen. It is stunning. Honestly, my cheerful tear is dropping.
    Anyway, Titanfall, I’m coming.
    What? Something pops up when I attach the network.
    What is [Killer Network Manager]?
    Wow. Now I know that Killer high-performance networking products combine intelligence, control and superior networking speed for HD video, high quality audio, and online games. That’s great. I hate the evil [LAG] in game.
    https://www.qca.qualcomm.com/products/killer-technology/
    After the quick test, it is time to install my game.
    I find a secret app in the tray of task bar during the game installation.
    YA! That is SSE (Steelseries Engine). I can set my own hotkey, backlight LED and combo key with this good friend.
    SSE is a smart app. It recognized my GT70 and my mouse immediately when I launch the app.
    Sorry again. I was wrong because I don’t need a mouse driver. The SSE can control all of the actions. It is so sweet.
    It is the time to say goodbye. Titanfall is calling. See you on battlefield!!!

    Editors' Choice Award
    http://www.pcmag.com/article2/0,2817,2457251,00.asp

  • MSI GT60 2PC Dominator BIOS Update RAID0 problem

    HI THERE , this is my first topic in msi forum and I hope you can solve my problem 
    I have the MSI GT60 2PC Dominator, my laptop came with FreeDOS with E16F4IMS.50Y non raid0 bios version (installed only one msata 128Gb), One day i upgraded my Laptop, I installed two more msata 128Gb. Now 384Gb Raid0 hard disk and i installed windows 8.1 64bit (Working UEFI mode).
    I flashed the bios yesterday to the E16F4IMS.515 which is the latest one but it seems that it doesn't support the RAID0, i didn't care about that, i installed windows 8 but everyday i'm getting several problems with GPU and that blue screen and its really annoying.
    So i tried to upgrade E16F4IMS.715 , But Flash_BIOS_by_UEFI_BIOS_Setup_Utility_e n.pdf this method not supported my laptop (Automatically restart after select bios file.), And i tried too EFI Shell mode bios update. But there is no Afuefix64.edi and FLASH.NSH files in New bios zip file. It has only E16F4IMS.715 file.
    Now my question is How can i flash the bios to E16F4IMS.715?
    Sorry for my bad English and i thanks for your corporation.

    Quote from: Nichrome on 04-November-14, 20:09:17
    Hello and welcome to the forum! 
    Sadly there is only 1 person that is able to help you with flashing procedure, but also directing you to the right BIOS file, and it's Svet. You might have to wait a little bit, as you may already know, it's users to users forum, and we come up when we can and if we actually want to.
    What way did you flash the BIOS?
    I used EFI BIOS utility method. I chose BIOS file and when i click OK button ,  it starts normally after 20-30sec. it doesn't update bios. How ever it works on E16F4IMS.515 (Non-RAID) bios updated successfully. But not working E16F4IMS.715 (RAID0) bios.

  • I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!

    I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!
    I really need this issue resolved it is driving me insane!!! How can the images appear perfectly fine on my laptop then when transferring over to a USB stick they just  corrupt!?

    Check out this site:
    http://osxdaily.com/2012/04/22/format-drive-mac-pc-compatible/
    That will show you how to format a USB stick for use on both PC and Mac.
    If the problem continues take it to an Apple store and have them check it out.
    >Also what s exFAT?<
    From:
    http://en.wikipedia.org/wiki/ExFAT
    "exFAT (Extended File Allocation Table) is a Microsoft file system optimized for flash drives.[3] It is proprietary and patented."
    That first site explains it at length.

  • HT1338 Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install.  Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"  Any one else having this issue?  Please help.

    Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install.  Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"  Any one else having this issue?  Please help.

    Hi there!
    Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us;  working on it!"
    Message was edited by: MacLuc

  • HT1770 I am setting up new Seagate GOFlex Pro for Mac for Time Machine.  Backup stops at 45.2MB.  A customer service of the Seagate said it is Apple's issue.  Please help!  Shuichi

    Backup stops at 45.2MB.  A customer service says that it is Apple's issue.  Please help.  Shuichi

    Event store UUIDs don't match  naming your internal HD or any other drive/partition being backed-up.  Time Machine can't be sure the OSX internal log of file changes that it normally uses is correct. 
    This happens in the following circumstances:
    •The first backup of a disk, or to a new location
    •After booting from your install disc, Recovery HD, or a different OSX volume (usually)
    •A full restore
    •Certain hardware repairs (e.g., new internal disk or logic board)
    •Removal of large exclusions
    •A very large volume of changes (especially an OSX update)
    •An improper shutdown of your Mac, or improper disconnection or power loss on the Time Machine drive
    •If it's an external HD, an improper shutdown or disconnection of the drive
    •A failed or cancelled backup
    •Many days without a backup
    It usually causes a lengthy deep scan/traversal (below), so if you see it frequently, you need to figure out why it's happening.
    http://pondini.org/TM/A6.html
    Might also have a look at...
    /Library/Logs/CrashReporter/backupd_2013-11-15-164711_NAME-nokonpyuta-2.crash

  • Nokia lumia 925 camera issue! Please help asap!

    If you see from the pics that i have attached below, the first one is where the photo is being saved and thats the natural colour of the image but the next pic shows the post saving issue that i get. The issue totally reduces the crispness of the photo and there is always the yellow thingy in the pic! Is it a processing error? software or hardware? I tried all possible solutions (soft reset, hard reset, deleting app and reinstalling) no use! I even tried the nokia recovery tool no use again! I am still facing the same issue after the update of nokia cam app! Any other nokia lumia 925 user facing the same issue? Please help me! I love taking quality pics! Compare both the pics side by side and you'll know my issue! I tried getting a solution from nokia care and all online support but no one can help me on this! I know there must be a solution for this. Is this covered under warranty if so my phone is under warranty period!
    Attachments:
    pre processing.jpg ‏338 KB
    post processing.jpg ‏332 KB

    These are some of the pics i clicked using my lumia and ya these are edited! Before saving these images the clarity and the contrast were emaculate but after saving the processing kills it! I use only manual settings on the nokia cam!
    Attachments:
    WP_20140501_22_06_23_Pro.jpg ‏140 KB
    WP_20140302_17_26_26_Pro20140302175555.jpg ‏413 KB
    WP_20140309_20_52_37_Pro20140309205516.jpg ‏247 KB

  • MSI GT70 2PC Dominator USB 3.0 Issues

    Hey folks,
    Hopefully somebody can be of assistance, me and my friend both purchased the MSI GT70 2PC a couple of months ago, fantastic laptop by the way. The only issue that both of us have been experiencing is with the USB 3.0 ports.
    The problem is that when we connect a USB 3.0 External HDD it occasionally works fine but more often than not it will continually connect and disconnect almost as if it is not getting the correct amount of power. Now we both work in a computer repair shop so we have tried all of the basics, ensuring drivers are up to date, changing the HDD cable and due to where we work we have managed to test over 5 different brands of USB 3.0 external drives, used and brand new, all of which work fine on other computers via USB 3.0
    Having read a few posts it seems that others have experienced this but there is no solution that I have found. Is there something we have missed or is this awaiting a driver update? The laptop is fantastic for my development needs however a £1300 laptop that can't reliably connect to a USB 3.0 drive is somewhat disappointing - I remain optimistic that there is indeed a solution!
    Thankyou in advance for any help you can provide.

    Hello markusbarrot,
    The USB 3.0 high-speed electric signal is easy to be interfered and this will make the device suffer intermittent connections/disconnections. Not every USB 3.0 device suffered by this. It depends on the quality of the circuits between the USB device and the mainboard of the laptop.
    1. Suggest you get a shorter USB 3.0 cable or an interference-resisted (magnetic shield) USB 3.0 cable. Some problems can be resolved by this.
    2. Update the firmware of your external USB devices. Some problems can be resolved by this.
    3. Return the laptop to the MSI authorized service providers or your local dealers for inspection on the USB ports. They can make sure your USB ports do work in the spec. or not. 

  • MSI GT70 2PC Dominator Wifi Dropping

    Hi there, new user here, first of all I have already read the existing post regarding wifi drops and fixes. To clarify, below are the steps that I have taken as per suggestions that i found on the net:
    1. Uninstalled the Killer Gaming Network manager program and only using the wifi/lan drivers.
    2. Re installed updated killer gaming network manager and drivers from both MSI and Killer websites.
    3. Change the maximize the power saving mode in the battery section for wireless adapter.
    4. Unable the power management settings in the network wireless via network and sharing centre.
    5. Use several different drivers via the update drivers window in network adapter (via device manager)
        - ive used the standard killer n1202 drivers.
        - ive used the qualcomm atheros wireless network adapter (both microsoft and qualcomm)
        - currently using the qualcomm atheros ar9462 802.11a/b/g/n wifi adapter
    These are the steps that i've taken, one of the many that i can remember doing at the moment. Still to this day my wifi issue persist.
    I refuse to believe that this is a hardware issue because the current GT70 that i am using is a brand new laptop that MSI has given me after I RMAed my earlier GT70. So you can say this is the 2nd laptop they've provided to me after making a hell lot of noise to them because my first GT70 had an unknown issue 1 week after light usage.
    I've ran out of ideas on what to do, i've been sucking this up for the past 3-4 months as i cant find a fix. I've done everything i can except updating the bios, which i was advised not to since I do not know how to flash or update my bios (whichever term you call it).
    My wifi drops so often and I keep having to flush my dns (using ipconfig /flushdns) every 30 mins or so just to able to use the net, much less play any games.
    So i was wondering if there was any steps that I missed? Im really in desperate need for help as i no longer know what to do.
    I appreciate any help that you guys can provide. Thank you very much!

    Just a quick update on my wifi after installing two different 'realtek drivers' from the MSI website.
    It's still too early to tell, I will update further once i start gaming.
    Just incase you guys wanna install the drivers, proceed to this link:
    http://www.msi.com/support/nb/GT70-2PC-Dominator.html#down-driver&Win8.1 64
    Download this two files:
    Realtek Audio Drivers (222.21MB)
    Realtek Cardreader RTS5227-GR & RTS5249-GR (10.3MB)
    PS: I downloaded the audio drivers just cause it had the name realtek in there lul!
    Keep me posted!
     UPDATE
    After 2 hours of gaming and surfing the web, i didn't had to constantly flush my dns. Although my wifi bar alternates between 4 and 5 bars, im guessing this is normal (as the wireless modem isn't in my room but the room opposite mine).
    So far so good, is it a coincidence? I am not too sure, give me a few more days of test run and it'll be more conclusive. I say you guys should update your drivers, no harm in trying right?

  • MSI GT60 2PC Dominator-- Loads of problems trying to install Win8 onto SSD

    Hi guys,
    I really, really hope someone can help me!
    I recently purchased GT60 2PC Dominator-626 which is awesome. However, it doesn't come with an SSD so I've got a Crucial M500 which I've installed. I'm trying to move over my Win8 install to this drive so that I can have my OS and most used programs on the SSD, but I've been having sooo many problems in doing this. I've tried using cloning software but no luck, whenever I clone the drive and enter bios or boot menu, it will never boot from the SSD.
    What I'd be really happy to do is have a fresh install of Win8 onto the SSD, but when I try to reset my PC using the MSI UEFI settings, i will never give me the option to re-install to the SSD, only the original HD.
    Anyone have any ideas?
    Thank you!

    Well after trying LOADS of different cloning options, I finally found a way to get my SSD work with this laptop:
    I opened Burn Recovery from the app page, used that to create 5 x DVD back up of the system.
    Then I removed the old HD, leaving only the SSD in. Placed the first recovery disc in and booted from DVD/CD drive.
    Followed that process and now I have an install of Win8 with the MSI stuff on my SSD. I then just got Win8 running, inserted the old HD and reformatted it!

  • Msi gt70 2pc dominator wlan

    Hey guys its me again, i have a question which i cant seem to find on the net.
    In the msi gt70 2pc dom driver page there seems to be two wlan driver; killer gaming wlan driver and intel wireless driver (beta).
    What are the differences between the two? I cant seem to find the intel wireless driver on my device manager despite installing the beta intel wireless driver. As im still having issues with the killer driver, i was wondering if i could use the intel driver. Thx

    The GT702PC has a Killer Wireless N1202 network adapter. There is no Intel adapter in the laptop (source: device manager).
    Edit - This is a Qualcomm Atheros device, so if you absolutely must start messing around with drivers, first step is the driver disc that came with the laptop, then MSI's site, then Qualcomms site.
    Extra edit - According to Qualcomm's site, the most up to date driver for this device is V10.0.0.274, which is the driver I currently have installed on my laptop/for this device. If you also have this driver installed, it's as up to date as it gets. You could try DL'ing it from Qualcomm's site & reinstalling it once you've ruled out other causes for any problem you're seeing

  • Multiple MSI GT60 2PC Dominator Problems

    This thing is a beast when it comes to running games and getting my work done, but there are so many problems that seem to sprout up every twenty seconds that I'm really starting to regret not getting another laptop.
    Anyway, I have several problems that I had to make an account to get help for, since there is no help whatsoever in the manual or elsewhere online.
    1.) When the computer is completely shut off, and I press the power button, it seems to start up for a moment (you can hear the fans start to whirl and whatnot), but then it turns back off. It then repeats this process for a random amount of time before it actually starts up (if it starts up at all).
    2.) The special keys that came on the computer, such as "cooler boost", "Display off", and "Dragoon Gaming Center" haven't been working properly. While the cooler boost still functions well, the Gaming Center icon and the Display Off button no longer respond to me pressing them. I mostly used Dragon gaming center to see how hot my CPU and GPU were running, but now it refuses to work whatsoever.
    3.) The "Fn key + F5" and other combinations no longer work. As in, I can no longer set my computer to eco mode or anything like that. The only function that seems to still work is when I want to turn off my keyboard backlight, but other than that, the Fn key seems broken somehow.
    Please help, it's very frustrating trying to deal with all this and finding no help online whatsoever.

    The information you give us is limited and symptom only, no other information such as OS, BIOS, EC, and app version which make it difficult to give advise. But for issue No. 1, maybe it is mechanical problem. when power button is hit, somehow the button get stuck or sink and then accidentally the power button is hit again which cause system shutdown.
    For issue 2 and 3, make sure you have installed correct SCM version and EC firmware for your system.

  • Trying to migrate from Windows 7 Ultimate to Windows 7 Professional (x64). Have issues. Please help. Thank you.

    I have a 128 GB SSD drive and I bought a 512 GB SSD recently.  I used the disk copy utility to copy all the information from the 128 GB drive to the 512 GB drive. However, Windows 7 Ultimate N x64 is asking me to enter my key for validation. Unfortunately,
    I cannot find the key used to install Windows 7 Ultimate N. When I used another valid key for Windows 7 Ultimate N, it would not accept the key because it is looking for the original key.  Since I didn't want to do a clean install, I was
    willing to 'upgrade' to Windows 7 Professional x64. I went into the registry and changed the Product Name to Windows 7 PROFESSIONAL and I changed the EditionID to Professinal. When I was trying to install Windows 7 Professional, I received the following message:
    The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue. 
    Your current version of Windows is more recent than the version you are trying to upgrade to. Windows cannot complete the upgrade.
    There is not enough free space on partition (K:). A total of 15 megabytes (MB) of free disk space is required. Try Disk Cleanup, or moving files to an external location such as a CD, DVD, or external hard drive, and then restart the installation.
    When I tried to rename one of my drive to K using disk management, it says the drive letter K is already mapped to a network share or a local path.  In order to see the volume after the operation, you must remove current mapping.
    What am I doing wrong?  Please help. Thank you so much.

    You can't just change the product name and have it work.  At this point your best bet is to
    go to this thread and follow the directions and post your results in a new thread in
    the Windows Genuine Forums.  That way, they can determine exactly which type of install you have and what your options are.
    Please do not read this sentence. Please ignore the previous sentence.

  • I am hacked on all my apple devices. How to solve the issue? Please help!

    Hi everyone,
    So whenever I open certain websites on Safari, suddenly I am redirected to either a women's health or a doctor's ad. (I am guessing this is called phishing)
    1)I've asked my friends if they've had the same problem with those certain sites and they replied no. Does this mean it is about my network? (I am the only one using this network at my home as I live alone)
    2)This happens on all my Apple devices including iPad and iPhone (when I tried to open the same website on my İphone while using mobile data, the problem did not happen- when I opened wifi on my phone it happened. same for iPad as well)
    Admedic said there were no adware, I have never changed my DNS so it has always stayed the way it always was also. So I am guessing my network is the problem.  (I am also guessing that this happened after I tried to watch a movie free online) BUT, this problem does not occur with Google Chrome on the same website. So is this about my network or my safari?
    I am now so scared if this person who hacked me gets all my information. What am I supposed to do? Please help!

    Hi! Thanks for your quick reply.
    A few things happened since I've posted this.
    1)I've deleted all the history and cookies from my macbook safari and when I opened the website with the issue, the problem did not happen this time.
    2)Seeing this, I've deleted my history on iPhone's safari and opened the same website but the problem was there again.
    3)The problem does not happen on iPad.
    So, I do not have the problem at all on Google Chrome but on Safari (now just on iPhone)
    Is this still about my router settings? If so would changing my phone DNS settings would suffice? Or do you think the problem might still remain on my computer as well?
    This is so frustrating for a person who does not know anything about technology at all
    Thank you!

Maybe you are looking for

  • FIXED: X300 - Touchpad and Touchpoint stop working at random

    Had a user today with an X300 say that his touchpad and touchpoint just 'stopped' working; plugging in a USB mouse allowed him to continue using the laptop, but both onboard devices were dead. We tried the FN + F8 toggle, which normally disables the

  • Unable to get component ID for: appl_name.object_name (WWV-13404)

    Hi, I got the following error message when I would like to export my appliction: Unable to get component ID for: schema.object_name (WWV-13404). The 'appl_name' is the name of the application and the 'object_name' is the name of the object, actually

  • How to set the priority of my AEIO?

    It seems that my AEIO has a lower priority than the original one, which causes some errors. (*.flv files) How to lift the priority?

  • Sharp Edge using the Ellipse Tool?

    I am using Fireworks 8 and trying to create an atom image but when I create the proton paths using the ellipse tool the edges show up as jagged instead of sharp after flattening the image and uploading as jpg, png or gif files to the server.  I've tr

  • Captivate 7 internalserverreporting.php quiz results

    Hi, I'm setting up an internal server on WAMP for publishing elearning and to host our quizzes. However on the first hurdle we have hit a problem. The wamp server seems fine, we can publish to the web server location and the files play, however when