MOVED: MSI P7N2 diamond M/B stuck on the m/b flash screen on start up.
This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=141751.0
>>Posting Guide<<
Similar Messages
-
MSI P7N2 diamond M/B stuck on the m/b flash screen on start up.
Hi, my problem is that my motherboard (p7n2 diamond) is staying on the screen that is supposed to come up for about 3 seconds on start up, it wont let me get into the bios or anything, because my keyboards aren't working with it for some reason. Ive tried both usb and ps2 keyboards, neither work. I am pretty sure that i have connected all the internal cables correctly. If anyone could give me any suggestions to why its not working, or even how to fix it, would be appreciated. Thanks.
>>Posting Guide<<
-
MOVED: MSI P7N2 Diamond with 9450... Questions!
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=119207.0Quote from: titom91 on 21-August-08, 19:40:45
No, Those values where when I was on a EVGA 790i Ultra... And the 1.3625V was because the system was lowering the Voltage on the cores... What i mean is that when you were setting for example 1.3V, the system was set at a lower voltage and when the system was not idle anymore, the cores couldn't reach the voltage they needed (the voltage set and the maximum voltage possible where not the same).
I am currently on overclocking my MSI board... I just got the ram stable at 1600 and atacking on the CPU...
What i wanted by setting this post is to know what range of voltages and frequencies people who had the same setup were having... to compare when done...
I know the voltage drops, vdroop, but 1.3625 is mental all the same. Mine's at about 1.32 for 3.4Ghz, and I can run it at much lower voltages for 3.2
What voltages/settings have you tried with the MSI board? And my board runs fine at 400fsb, if you want to see if there's an fsb hole just drop down to 395 (1580qdr) or something. -
MSI P7N2 Diamond vs PSU Silver power 850W
Halo!
I bought MSI P7N2 Diamond and set it witch PSU Silver Power 850W.
I would like to ask you whether the value of V is normal. Especially at +12 Vol.
The voltage values read in Bios.Bios version 1.1 and something here does not agree.
System is not stable sometimes hangs..
Please help. The power supply is new but I have concerns about the power supply,
because this is the first one of the 5 motherboards which worked in this configuration..
PSU Value:
ELECTRICAL PARAMETER
Model / Type SP-S850
AC-Input 100 - 240 VAC; 60/50 Hz 12/7A Active PFC
DC-Output +3.3 V +5 V +12 V1 +12 V2 +12 V3 +12 V4 -12 V 5 Vsb
Max. Amps 24 A 28 A 20 A 20 A 20 A 20 A 0.8 A 3 A
Max. combined 180 W I 816 W I 20 W
Total Power 850 W
Voltage Values
CPU Core 1.14 V
+3.3 V 3.26 V
+5 V 5.01 V
+12 V 2.64 V
+3.3 V Standby 3.30 V
VBAT Battery 3.06 V
GPU Vcc 3.21 V
QuadCore Intel Core 2 Extreme QX9650, 3000 MHz (9 x 333)
MSI P7N2 Diamond (MS-7523)
DIMM1: G Skill F3-10666CL7-1GBPI
DIMM2: G Skill F3-10666CL7-1GBPI
HyperTransport 200.0 MHz
PCI 33.3 MHz
PCI Express 100.0 MHz
MAC PHY 125.0 MHz
SATA PHY 100.0 MHz
Audio/Modem Codec 24.6 MHz
USB2 Controller 48.0 MHz
PIT / ACPI Timer 14.3 MHz
Graphics Processor Properties
Video Adapter XFX GeForce GTX 285
BIOS Version 62.00.45.00.30
GPU Code Name GT200b
Bus Type PCI Express 2.0 x16 @ x16
Memory Size 1 GB
GPU Clock (Geometric Domain) 691 MHz (original: 690 MHz)
GPU Clock (Shader Domain) 1548 MHz (original: 1552 MHz)
RAMDAC Clock 400 MHz
Pixel Pipelines 32
TMU Per Pipeline 1
Unified Shaders 240 (v4.0)
DirectX Hardware Support DirectX v10
Pixel Fillrate 22112 MPixel/s
Texel Fillrate 82920 MTexel/s
Memory Bus Properties
Bus Type GDDR3
Bus Width 512-bit
Real Clock 1296 MHz (DDR) (original: 1300 MHz)
Effective Clock 2592 MHz
Bandwidth 162.0 GB/sBios show this voltage value..
Quote
Voltage Values
CPU Core 1.14 V
+3.3 V 3.26 V
+5 V 5.01 V
+12 V 2.64 V
+3.3 V Standby 3.30 V
VBAT Battery 3.06 V
GPU Vcc 3.21 V
various win programs show the same value
i dont have anything else
Quote from: Mike on 28-July-09, 01:16:12
If it really was 2.64V on the +12V rail, your MOBO wouldn't even post. That reading is a wrong reading. What are you using to check the voltages? What is shown in the BIOS?
i really had serious problems .Two A..S Striker 2 Extreme down ,2 MSI P7N2 diamond mobo down {[3 x ( start,5sec -> freze)] and no post anymore} And suddenly the third P7N2 Diamond working.
Nothing changed. How to explain this? -
MSI P7N2 Diamond with 9450... Questions!
I passed from an EVGA 790i Ultra to a MSI P7N2 Diamond (Same Chipset but the MSI is far more stable).
I would like to set my Q9450 to 3.2GHz. I was at 3.2 on my Evga.
I was wondering if one of you has some bios settings for this frequency on the P7N2? (core voltable, MCP voltage, etc)Quote from: titom91 on 21-August-08, 19:40:45
No, Those values where when I was on a EVGA 790i Ultra... And the 1.3625V was because the system was lowering the Voltage on the cores... What i mean is that when you were setting for example 1.3V, the system was set at a lower voltage and when the system was not idle anymore, the cores couldn't reach the voltage they needed (the voltage set and the maximum voltage possible where not the same).
I am currently on overclocking my MSI board... I just got the ram stable at 1600 and atacking on the CPU...
What i wanted by setting this post is to know what range of voltages and frequencies people who had the same setup were having... to compare when done...
I know the voltage drops, vdroop, but 1.3625 is mental all the same. Mine's at about 1.32 for 3.4Ghz, and I can run it at much lower voltages for 3.2
What voltages/settings have you tried with the MSI board? And my board runs fine at 400fsb, if you want to see if there's an fsb hole just drop down to 395 (1580qdr) or something. -
I was attempting to update my iPhone 4 to the new iOS 7.0.4 via my computer after I plugged it in to create a backup copy and something went wrong before it could finish and I recieved an error message. Now my phone is stuck on the "Connect to iTunes screen". I've tried everything to reset & restore my phone with no luck!
I have:
-Restarted my computer
-Updated iTunes to most current version
-Turned phone on and off several times, waiting up to a half hour before turning on (to be greeted directly with apple logo then the connect to iTunes screen)
-Turned on, turned on and held home button (nothing happens)
-My computer is NOT recognizing my device at ALL! But when I plugged my boyfriends iPhone in, it detected it no problem.
I tried calling my phone from the other phone and it goes straight to voicemail. I am super frustrated! Does anybody know what is going on?I was able to restore my phone!!!
I called Apple and they said there was nothing more I could do. I called my carrier Verizon and was able to get my computer to recognize my device after trying this-
Solution:
After trying EVERYTHING this is the ONLY thing that worked-
I took the USB connector cable out of the USB port it was in, and tried another one on the otherside of my laptop and iTunes was able to discover my phone in recovery mode. My phone was reset and everything is fine ( thank gosh for backup copies!) -
i got an ipod from a friend and i tryed to start it up and it is stuck on the connect to itunes screen, it wont even pop up on itunes it says i have to put in my password to continue but i cant because it is stuck please help me!!!!!!!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My ipod touch is stuck on the connevt to itunes screen! Wont go away!
My ipod touch is stuck on the connect to itunes screen. It will not go away, no matter what I do. I have tried to restart it, but the screen comes back. I don'tknow what to do please help!
You need to connect it to iTunes and restore it. If necessary, manually place the iPod in recovery mode first using the instructions in this Apple support document
iOS: Unable to update or restore
B-rock -
Restoring ipod and it say's can't find software and use a cd-rom if necessary. My ipod is stuck on the connect to itunes screen and wont do anything. What am i supposed to do?
Please help, i will be very gratefulyou can do is go to ijailbreak.com then select downloads section.......scroll down and see the latest version of ipod touch second generation is available for download.....when it gets downloaded connect your iPod to itunes or keep it connected then hold option and click restore (mac) search the software by writing in search "iPod" a thing with white cube will show up if it is the file you just downloaded click it and wait for itunes to do its work......you can ask more if you are on windows
-
ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it
lol ok nvm i fixed it
-
IPhone 4 is stuck on the connect to iTunes screen and won't activate?
My friend wanted me to back up his iPhone 4 but when he brought it over it seemed like it was in recovery mode and it is stuck on the connect to iTunes screen. He never connected the iphone 4 to iTunes before this and I know he didn't tamper with it. When I try to sync the iPhone 4 with iTunes it accepts the iPhone but I keep getting a message that says that " the iPhone cannot be activated and may be damaged & to bring it in to the nearest Apple Store" this makes no scense cause the phone has not been tampered with at all & it seems that everything on the start up menu is working fine, the touch screen, voice prompts, the volume up/down, vibrate, home and sleep/power buttons are all operating properly? The only thing is that he hasn't payed his bill and AT&T shut his service off, but I don't think that this would cause the phone to go into recovery mode. What does cause the iphone-4 to go into recovery mode and why would I even have to activate the iPhone-4 if it was already set up? If this has happend to anyone else or if anyone can help me out on this one, I would appreciate it even if the answer ends up being that he needs to take his iphone-4 into the Apple Store or AT&T because the iphone-4 is under 6 months old and like I said has no physical damage at all? Help anyone???
well I only have a 3gs so I'm not all up on the current but the way I see it you have a few option's depending on the route you want to take,
If you don't mind loosing what's on the phone (if you want to try save info try 2 before 1)
1. (Best Chance) put the iphone into DFU mode, (1. turn off iphone while plugged into computer, then hold the sleep button count to three 2. then hold the home button whiile still holding the sleep button, count to 10 3. release the sleep button but keep home button,) then itune should detect the phone and offer to restore it, this should restore it
1b. I would repeat above with a active SIM card, doesn't make a difference where I live but you never know
1c. I wouold try On difference Computer (rule out bad download, currupt driver's etc etc
If you want to try save the information then I would say you are doing some of this at your own risk as I'm not sure about apple rules regarding these, the steps should all be legal but might void your warrently so be warned!
2. Download a utility call Tinyumbrella ( http://thefirmwareumbrella.blogspot.com/ ) and have you phone connected and run the program, on the left should be a list of connected devices (make sure itunes is closed) click on the device connected and on the right click exit recovery, hopefully your device will reboot normally, (there's also an fix recovery option but I've never used that)
2b this option is to jailbreak your phone as that "hacktivates" your phone if using this option and it works I suggest a FULL backup then follow option 1 above, download a program call Redsn0w ( http://blog.iphone-dev.org/tagged/redsn0w ) and follow the instructions that come with it, again if this works I suggest a full backup then follow option 1 about even if you do wish to stay "jailbroken"
this advice is just some idea's as you have given no information on what happen or firmware involved current mood of phone ^^ I can only hazard a guess at the problem< if after these steps is doesn't work i suggest trying to bring it back and get someone professional to look at it
Message was edited by: Nightweb
Something happened to post -
I did a reset on my iphone 4.. now it's stuck on the connect to itunes screen.. I have tried EVERY troubleshooting thing on the apple site. I've reinstalled to a later date of itunes. I've rebooted.. please HELP!! iTunes stopped recognising my iPhone after I undated hence the reverte back to an older iTunes version. My phone's cord is fine it will charge in the wall on the dock as well iTunes just isn't recognising it?!?!
iTunes will also NOT recognize my iPod Touch.. I've reinstalled iTunes several times on all THREE of my computers to the same result.. I'm going insane.. The newest iTunes has made it a real hassle!! Before I updated my iTunes both connected just FINE!! Now neither my computers (3 of them) or iTunes will recognize the iphone4, or the iPod Touch. The threads that people are posting to go back to the SAME 6 troubleshooting steps aren't really helping. ANYONE else had the same problem but was able to resolve?? A little desperate here!! HELP!!
-
My ipod touch (2nd generation) is stuck on the usb to itunes screen. I have NOT jailbroken it, and i have also tried restarting numerous times. I need help, soon! Itunes on my computer works about 50% of the time, so i feel lost!
Download RecBoot and see if you can kick it out of recovery mode.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
Plese help?
First my ipod didnt show it was charging but still turned on(it was dead) so i tried the hold sleep and wake button but my computer(windows 7) wont recognize it so its stuck on the connect to itunes screen.
PS i took it to get it fixed and they said they changed the battery not sure if that had anything to do with it????
please help and Thank You.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bend or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
My Ipad has been stuck on the connect to Itunes screen now for days, it will not charge through the PC or wall charger. When plugged into the PC it is not recognized by it. Itunes doesn't see it and it will not let me reboot the system. How can I get past this so I can start using it again?
Hello Aloe_85,
This screen indicates that your device must be restored before it can be used again. The steps detailed in the article below can help get your iPad to reappear in iTunes so that it may be restored.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen
Maybe you are looking for
-
HT201335 How to I watch video from AmZon on Apple TV
I have prime membership on Amazon.com. How to I watch their movies on Apple TV?
-
Dark ipod screen seeks bright light
My daughter "washed" our ipod touch and the screen went dark. I dried it out and it works but the screen view is very dark. Is there a solution to bring back the light?
-
BC4J - Generation of complex component
I have a model like so: 1: Person with a pk 2: Customer with a pk and a fk from person 3: CustomerProject with a pk and two fk one from customer, one from project 4: Project with a pk 5: ProjectTask with a pk and a fk from Project and a fk from Task
-
I need to restore my IPhone 5 and I get -1 error
Every time I try to restore the phone it stops when it reaches the last segment and that it is the installation of the Firmware and I get the -1 error.
-
well i just got this dualdisc in the mail and i had been waiting for like 2 weeks for it, so i wasn't thinking and put it in my MB..but it didnt take it in right away so i hurriedly shoved it in and now it won't come out. my laptop did nothing, its l