MOVED: Overheating Issues R7 250 and similar and background info

This topic has been moved to Graphics Cards.
https://forum-en.msi.com/index.php?topic=256479.0

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Similar Messages

Common overheating issues when charging and messaging?

Hi,
Just got the iphone 5s a few days ago and noted that the device overheats during charging and sometimes simple messaging. The heating during charging made it unbearable to hold. I was using 4S previously and did not have these problems or rather not this significant. Is this a common problem you face or a fault? Are there any known solutions? I have already updated to iOS7.0.1. Please advise, thanks!

try restoing via itunes as a new device. test if issue persists. needs repair

Display issues (application placement and background) when waking from lcd sleep

I hve three DVI displays connected to my Mac Pro running Lion. I regularly put my displays to sleep using a hot corner to lock my workstation. This was not a problem in Leopard or Snow Leopard; however, in Lion I have noticed several issues upon waking the workstation from sleep.
-One of the LCDs will have a grey backgroud instead of the wall paper set for it.
The lcd with the grey background seems to be determined by which lcd I place the dock in.
The background will come back if I logout, reset, or move the dock to a different screen
-The applications will not be located on the screens they where on when I put the displays to sleep
Sometimes they are all on one display or distributed across two displays (this is most common)
Rarely the applications will not be on the correct displays and they will have been resized.
I'm liking OSX Lion so far, but having to repeatedly fix these problems is becoming a serious pain. I have updated to the latest patch for OSX 10.7, but that did not change anything reguards to these problems. Does anyone know how to solve these problems?

Matteo : I guess it is a good sign that only 2 of us have reported this minor glitch here . . . I may experiment with switching to a different desktop pattern and / or screen saver to see if it persists . . . also, since installing SL I have only done Sleep and of course restarts after getting the 10.6.1 update and a few others so I need to do an actual Shut Down and later start up fresh and see what happens.

Found Permanent Solution to Overheating issues.

Alright this is the part where some of you are going to be happy with me and some of you are going to be upset. That's because I know how to solve overheating issues with xp, and with macbookpro using the Geforce 9400M, and the Geforce 9600M GT. This solution very well could work for other systems, if you find the right drivers. but here it goes.
Alright, I have obtained nvidia drivers that will efficiently replace your current ones and stop the both cards from running simultaneously. I have read that this is the problem, though I don't know if that's really what's going on, because obviously, we can all run high end gfx games on our mac os, and not get to the critical point of our laptops shutting down, but on Bootcamp we all seem to have this issue and I haven't found a single solution that really helps.
Ok lets start off, everyone, use your fan control programs, wether SMC or input remapper, doesn't matter to me, personally, I use SMC and deal with the restarting os all the time to keep my fans running at max speed, 6000rpm.
Now comes the solution, type this into google. "185.85notebook_winxp_32bitwhql" and I'm assuming though i don't know, that they have this for other than xp users. Download this driver from the very first site that comes up.
And then proceed to uninstall your nvidia drivers for windows. Select "Remove Only the Following", and check both SMU DRIVER, and PCI SYSTEM MANAGEMENT, but for the sake of keeping your internet, leave the ethernet driver. Uninstall.
Install your new nvidia drivers, and it should show up in your Add/Remove programs as being around 1gb of drivers. You should notice when you start your bootcamp your computer is complaining about new hardware thats not installed. Well yes, we're still using the gfx card, but without the extra drivers that apparently promote this overheating and instability.
If you are having trouble, let me know I'd be happy to help you out, at any stage. Try this out, Worst case scenario, you have to put your disc back in and reinstall your drivers. Oh yes, And i'm using the newest disc out from Snow leopard. I don't know if the drivers are any different.
Note Your computer will still heat up, it just doesn't reach the point during gaming that it needs to shut off to save your processor. Please let me know if this works for anyone else. I suffered this problem, of shutting down after an hour or two of play for weeks until I discovered that this solution worked for me.
Message was edited by: Trilithiumn

Sounds like a damaged database.
There are reports on here from people with all sorts of issues. That's what the forum is for. It proves nothing except that people have all sorts of issues.
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best
My wife have iPhone 4 and ipad new is not updated it working good and my devices after update working bad :-(, likely the devices of my wife stay with 5.1.1

good thing i havent updated mine yet..

IMac 27" (Late 2012) Loud Fan and Overheating Issues, causing Hard Drive Failure

Hi all,
I'm having some serious overheating issues with my new iMac. Any help to help me solve this problem would be gladly appreciated since it's really beginning to bug me. Here's what's has happened:
I noticed in the first few hours of switching the iMac on that there was a short burst of very loud fan noise. This has been happening about once every two days since and every time I haven't been doing any heavy processing with the system. I've noticed that the main fan will spin, on average, at 1200rpm. Is that normal? The iMac is very well ventilated and sits right next to a window...
I have also boot camped the iMac with a copy of Windows 8 so I could run some fairly power-hungry games. I intentionally purchased a high end iMac (27" display, Intel Core i7 3.4GHz, Nvidia GeForce 680MX Graphics, 1TB Fusion drive) and expected the iMac to run games flawlessly. However, after a few days, I noticed that the CPU and GPU had shot up to a worrying 80°C whenever I ran power-hungry games, with a very loud hissing noise from the fan. After running games for about 10 minutes, the fan will stop hissing, causing the GPU and CPU to increase to 100°C. The iMac then fails and switches off unexpectedly without any warning. After analysing the Windows event logs, I received an event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
As this occurred about six times whilst I was testing my iMac's performance, I think my hard drive has now begun to fail - sometimes I will hear the hard drive make a click noise, about once every 5 seconds. Sometimes, the clicking noise causes OS X and Windows to run very slowly (even though minimal RAM is being used and nothing too intensive (Safari, Mail etc.) is being processed). Running Repair Disk and Repair Disk Permissions under OS X's recovery mode as well as a repair in chkdsk in Windows suggests that there were no problems with the hard drive. All I can do is wait a while for the clicking noise to stop, and then performance will increase. I have backed up everything externally.
I have also performed a reset of the SMC as well as the PRAM, which hasn't really helped.
Any help will be appreciated. I will gladly provide any extra logs etc. if they're needed.
Thanks so much,
Alex.

Alex Cummaudo wrote:
I've noticed that the main fan will spin, on average, at 1200rpm. Is that normal? The iMac is very well ventilated and sits right next to a window...
That's the default fan speed on iMacs, so there isn't any problem with this.
Alex Cummaudo wrote:
I have also boot camped the iMac with a copy of Windows 8 so I could run some fairly power-hungry games. I intentionally purchased a high end iMac (27" display, Intel Core i7 3.4GHz, Nvidia GeForce 680MX Graphics, 1TB Fusion drive) and expected the iMac to run games flawlessly. However, after a few days, I noticed that the CPU and GPU had shot up to a worrying 80°C whenever I ran power-hungry games, with a very loud hissing noise from the fan. After running games for about 10 minutes, the fan will stop hissing, causing the GPU and CPU to increase to 100°C. The iMac then fails and switches off unexpectedly without any warning. After analysing the Windows event logs, I received an event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
You must know that Boot Camp isn't compatible with Windows 8 and that Apple hasn't released drivers for Windows 8, so it can fail. Install Windows 7 inmediately until Apple launches updated drivers.
As it looks like the hard disk is damaged, I would take the Mac to an Apple Store. It's in warranty, so it should be repaired for free or you should receive a new one

BIOS Update and Overheating Issue

A big Hello to all my fellow HP Users and a very Good Day to all of you
I have an HP G61-455EE Notebook PC running a Windows 7 ( 64 bit ) OS with an overheating issue - the underside of the laptop runs really hot after a while of usage and the system goes into "Hibernation" with a displayed message due to overheating.
Pursuant to my research on this subject, I have come across advice to clean the fan ducts ( which I did ) and to update my BIOS, and that is where the problem lies.
My BIOS current information : HP F.23, 12/21/2010 and the HP Driver Download lists a new update F.23 ; Released: 2011-01-14. Upon download and subsequent installation with the "insydeflash" program that pops up during BIOS instalation, the current and the new version are shown to be the same and despite procedding with the installation, it still shows the same old version.
I would love all your help and advise on this, as to what I should or should I just go ahead and replace the fan ( Is that even adviseable ? )
Looking forward to your help
Cheers !

F.23 is F.23 despite the discrepancy in the release dates. You have the latest BIOS.

Fan noise/overheating issue? I have a late 2008, 15'' MBP and I'm having a lot of fan noise while just running safari. I don't think this is normal but perhaps it is? Thanks for any and all help!

Fan noise/overheating issue? I have a late 2008, 15'' MBP and I'm having a lot of fan noise while just running safari. I don't think this is normal but perhaps it is? Thanks for any and all help!

Runaway applications can increase fan activity

Satellite A210-14S graphic issue - 2 vertical and symetrical lines

Hello,
I have bought a Satellite A210-14S ATI HD2600 1 week ago, which from performance point of view really convinces me.
Unfortunately, during this time, it happened twice, that *suddenly* colors got grainy and with increased contrast, including 2 symetrical and vertical lines of same width (about 3cm).
Those lines also showed the background, but with a different color.
Besides, on horizontal view, some spots started to blink.
The 2 times this happened, the error seemed to have same characteristics.
In both cases, after a reboot, this symptoms dissapeared.
Enclosed some screenshots
[http://img248.imageshack.us/img248/3609/bild054oj5.jpg|http://img248.imageshack.us/img248/3609/bild054oj5.jpg]
[http://img339.imageshack.us/img339/3342/bild047qc9.jpg|http://img339.imageshack.us/img339/3342/bild047qc9.jpg]
[http://img91.imageshack.us/img91/4706/bild046zx5.jpg|http://img91.imageshack.us/img91/4706/bild046zx5.jpg]
Now the important question: is it a hardware fault (GPU, RAM or even TFT) or might it be a driver issue? (I use the dedicated Toshiba Ati driver)
Would be important to know in a timely period, due to the option of money back I have in Germany (14 days)
Thanks in advance for your all help.

HI,
first of all, thanks for replying, appreciated.
I also had/have the fear of a defective G-card, but also supected or hoped it might be a overheating of the system or similar, though i haven't seen any similar cases with those symptoms after a google research . Now I have this notebook for 3 weeks and it only remained these 2 cases where it appeared.
I will try to connect the PC to my external tft when it happens again, I had heard of this procedure, though it will only show me if the internal TFT is kind of damaged.
I think I have to contact the Toshiba service point if G-card is faulty.
Thanks for all replies again

Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment detail

Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment details!! thanks in advance!!

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Issues during creation and maintenance of BOM using FM's

I am facing problems while using FM's BAPI_MATERIAL_BOM_GROUP_CREATE , CSAP_MAT_BOM_CREATE .
   Previously i was using CSAP_MAT_BOM_CREATE but it did not support creation of another alternative bom if there already exists one for the same material,plant,usage.
   So i started using BAPI_MATERIAL_BOM_GROUP_CREATE. This bapi supports creation of alternative BOM's but i have a requirement that i need to create items with a specific item id.
   The Bapi's interface has a item table which has a field item_id which i am filling up but internally this bapi converts it into a structure using FM 'MAP2I_BAPI1080_ITM_C_TO_ITM_CL.'
   But this FM does not transfer the item_id from the bapi's structure into the internal structure field ident. The FM being called from this bapi for creating items - CS_CL_S_ITM_CREATE uses this ident field for updating item id in an item but this field is empty.Do you have any idea how this issue can be resolved ?
   Also similar to BAPI_MATERIAL_BOM_GROUP_CREATE i was not able to find a BAPI for changing an existing BOM.Currently i am using CSAP_MAT_BOM_MAINTAIN.
   Can anyone please help me out with these issues .

To enable and protect the variant maintenance of a report, it needs an S_PROGRAM group on it (see report RSCSAUTH).
Via S_PROGRAM p_action = 'VARIANT' those users can then maintain the variants AND also submit the reports via report trees or transactions (including SA38 for example).
To make the variant user specific for maintaining it but not restricting the ability to use it, take a look in transaction VARCH at the "Protection" flag (this is user specific then, for the current user who sets the flag first).
Also see the SAP notes and discussions here about report RSVARENT - for globally unlocking the protection (to be used and protected itself with caution).
To lock them down beyond the reach of the user's normal authority, you can also create custom system variants in client 000.
Cheers,
Julius
Edited by: Julius Bussche on Jan 13, 2009 6:07 PM

ADF Faces - issue with Portal and af table

I wonder if anybody could help me with a problem we are experiencing with running our ADF Faces app inside a portal (NOT Oracle Portal). We are using the af table tag with the rows attribute set as follows:
<af:table emptyText="No items found"
rows="10" banding="row"
bandingInterval="1"
binding="#{backing_ModuleSearchReg.table1}"
id="table1"
var="row">
What this does is if we have more than 10 rows to display it will display
a table header that has a label 'Previous 1-10 of nnn' Next 10. However, when you click on 'Next 10' it produces a Javascript error.
When we run the app outside of the portal we do not get this problem.
I believe this is related to known issues with JSF and Javascript inside a 'framed' web page. But if anybody help me with this or point me to a resource that can help it would be very much appreciated.
Many Thanks in advance.
Chris

Hi,
I remember a similar issue with inner frames that should be fixed in JDeveloper 10.1.3.3. The problem was that the ADF Faces JavaScript did not get the correct document root.
Frank

Moving my itunes music, movies, and apps to my Macbook from my windows computer???

moving my itunes music, movies, and apps to my Macbook from my windows computer??? I'm starting to have issues with my HP Pavilion, Windows 7, g6t-2000 Notebook PC 64-bit...... and I don't want to take any risk of losing my music and videos because a majority of is third-party (TRUSTED) and I don't want to lose them...... I need to move them to my MacBook, Mac OS X (10.7).

Click here for options. Any movies you've rented from the iTunes Store on the PC won't play on the MacBook.
(82078)

Finder issues and Get Info refusing to show the number of files on items on the main hard drive.

I am having finder issues. Mostly on the main hard drive. It takes ages to find things and I get the spinning wheel every time I open a folder.
So I moved all of my files to a external drive. When I had finished transfering I hit get info on the files on the external drive and on the same folder on the main drive. To ensure that it has copied over all the files. Because it was acting up and not copying all the files.
Get Info refuses to show the number of files within the folders on the main hard drive. It hasppily tells me everything on any of the external drives.
I have reset, the imac. I have re indexed 3 times. I have deleted the finder plist files. I have reset finder using terminal commands. I have moved nearly everything off the main hard drive. But nothing is working.
Can anyone offer any suggestions as to what could be causing my finder and get info issues.
Any help wpuld be appreciated.
Running Mountain Lion on a late 2009 Imac

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd,noschg,nosappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
 ▹ Restart
from the menu bar.

Issue with GR and IR.

Hello All,
I have an issue with GR and IR. Following is the scenario.
PO is created for 1 PC at 100 USD. Material is having moving avg price.
GR is done for 1 PC at 100 USD.
IR is done for 1 PC at 100 USD.
again IR is done for 1 PC at 40 USD. (Total IR is done for 140 USD)
Now GR is reversed at 122 movement type for 1 PC.. Amount reversed is 70 USD.. [(100+40)/2]
IR is done (credit memo) for 1 PC at 100 USD.
again IR is done (credit memo) for 1 PC at 40 USD. (price changed manually in MIRO)
So now open GR Qty is 1 PC for 70 USD.
Please suggest how to balance the GR ie how to make zero Stock.
Also let me know where to make a check so that IR is not done beyond the Stock maintained in PO.? How to corrrece the program?
Thanks in advance
Forum Shah

Hi,
First Let me make you clear, that system nothing to do MAP of material it fetch Material Price With PO for GR and even for reversal for GR.
If you have GR Based IV and you have done GR for I PC then you can only do the IR for One Piece.
For Other 1 PC with 40 USD
There may be possibility that for next in T Code MIRO, you may be doing Subsiquent Debit/ Credit in which system only for value not qty.
Because IR has nothing to do with Qty, system will distribute value to qty as per stock available or Price Type.
and if you have done 122 for that material, then system will ask for material number or delivery note.
Then system will only reverse the GR Qty.
please check the logs of the t codes done.
Hope Help U !
Regards,
Pardeep Malik

MOVED: Overheating Issues R7 250 and similar and background info

Similar Messages

Maybe you are looking for