Moved to a new address - Activate without a Technician?

I moved to a new apartment within the same building as my old apartment. The apartments are FiOS Ready, so I don't have to worry about running wires, installing an ONT, etc. In fact, the apartments were wired with ethernet ports specifically for FiOS when they were built, and I have already identified and configured the switch in the closet/ wall which controls which ethernet port in the various rooms is used for FiOS.
I've terminated and moved my FiOS service from my old apartment to my new apartment via My Verizon already. However, the soonest date the online scheduler listed to have a technician come out is a week from now (which I've scheduled). It is completely unacceptable for me to be without internet for a week.
Can I activate my moved FiOS service without a technician needing to come?

You will need to call customer service and see if they can change you to a self install or change your tech date. either way you need customer service.

Similar Messages

Moving proxies to new address

Hi
My ISP has moved me from 1 IP to 5 but I have to get all new addressing.
They have their modem setup with the old and the new.
I have added the new IP to bordermanager as public and checked it on all
the proxies. It looks like it takes but I cannot connect to the services
from an outside PC. I can ping the address but not get web or smtp etc.
I have also add the new IP in inetcfg and added the new gateway as
another default route.
Is it Bordermanager or routing?
Netware 6 sp5 and Bordermanger 3.7 sp2.
Thanks,
Will

HI
Thanks!!
I did some testing and it was the gateway. Once I removed the old
gateway I was able to see websites, smpt etc.
I was hoping to be able to use the old and the new addresses to make the
transition seamless. That might have been possible if I had more time to
research and the ISP had NOT deleted my old IP without telling me.
Thanks,
Will.
Craig Johnson wrote:
> In article <Xm0gl.4313$[email protected]>, Will K wrote:
>> I have also add the new IP in inetcfg and added the new gateway as
>> another default route.
>
> Good.
>> Is it Bordermanager or routing?
>
> It's likely to be routing or filtering.
>> Netware 6 sp5 and Bordermanger 3.7 sp2.
>>
> Have a look at tip #1 while you are here...
>
> First thing you want to do is to test basic connectivity of the server
> to the internet without filters in place. UNLOAD IPFLT to disable
> filtering.
>
> Ping the router (default gateway). If that works, ping an IP address
> of some internet host that you know responds to ping. (Perhaps a DNS
> server). If that works, check DNS entries and ping something by name.
> (Www.google.com responds to pings).
>
> If that works, load IPFLT and see if you have internet browsing. (Ping
> is blocked by default filters, and you may or may not have added an
> exception to allow ping to work with filters up. But proxy should work
> if the server can resolve names and route to the internet).
>
> If you fail with filters up, you need to change the default exceptions.
> Either you forgot this step or made mistakes. While you can
> search-n-replace the changes in a text file if you know what you are
> doing, it is safer (and easy) to just use FILTCFG to look at the tcp
> exceptions, find each one that had the old public address, and change
> it to the new public address.
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
>
>

Moving home-unknown new address

Hi all, I am hoping you can help with some advice. I currently live up north but have just been offered a job in London. I will be moving out at the end of April and for the first month I will be living in a serviced apartment. I have not yet found a new flat in London and will probably not until after I leave my current flat for good.
This is a very stressful process and, of course, as always, BT have decided to add to the stress. I am currently in a 1-year contract for phone, TV and broadband. I don't want to cancel, I don't want to stop paying, I simply want to take it with me. I’ve just called the helpline and have been told that I basically have no option:
- I can’t do the “move home” option because I would need to supply the “new” address – which I don’t know yet.
- I can’t put my current contract “on hold” even if I agree to pay for it while not using it – not sure why, it just can’t be done.
- the only option I was given was to CANCEL my current contract which, of course, will also mean me paying the cancellation fees. This is not an option.
The only work-around I can think of is to simply not do anything for 1 month and hope that my current flat won’t be rented out quickly. But then I have no guarantee the new tennant won't cancel my landline.
I don’t understand why each time I have to deal with BT, I hit nothing but walls.
Any thoughts/suggestions?
Thanks!
A.

anamariap wrote:
Hi Keith,
Thanks for getting back to me. I think your suggestion might turn out to be my only solution but but I think this might cause an issue for both myself and the new tennant.
Surely there must be an easier way to do this! All I want is for BT to "suspend" my services - I am absolutely fine with paying even if I'm not using them - and then do the house move as soon as I have an updated address in a month or so.
Has anyone had any experience with this before?
Thanks!
DavidM has offered to help you, sorry I could not suggest anything else, but as DavidM is a BT Employee, he is really the best person to sort this out.
If you click on this link DavidM
You should see the "contact the mods" link, where you can fill in the form. DavidM is a member of a specialist UK based team of troubleshooters.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Moving Service to New Address

Anyone have experience with moving their FiOS service from one address to another? Everytime I have to deal with human beings at Verizon, it is a pretty big pain, so I am worried that the move/transfer process could be pretty painful and that it might just be easier to cancel service at my current address and sign up for new service at my new address. Any thoughts or experiences would be greatly appreciated. Thanks.

I have only had Fios for a few years at the same address and I will not be moving any time soon. Moving is definitely a lot of work. But in my honest opinion, I think you should give it a shot with transferring your service to the new address. How bad can it be? I would think that cancelling and starting all over again as a new customer at a new address will be even more work and aggravation in the end that you don't need. Why create more headaches? Then that way, you can remain on record as a loyal customer and continue renewing your contract every two years to receive the discounts and the Verizon rewards card. Maybe it won't be such a pain.
Verizon's customer service really isn't that bad. I've had some good reps on many occasions who were helpful and you know what I do if I'm dealing with someone who really is rude and/or not helpful at all, or if I have already been holding for more than 20 minutes? I call back later and speak to someone else. I do believe that the majority of them are doing the best they can with what they have and none of them have easy jobs. Or try it on line if you don't want to be bothered on the phone. I've had some very good customer service that way too with certain technical issues or with renewing my contract. I think the more important goal is to resolve your issue in the end, which is something I have always been able to do regardless. And then once my issue is resolved, I move on and only call Verizon's customer service if and when I need to.
Remember, it's the product and service that you are paying for; and the quality which I personally think is far better than cable.

Moving to a new (shared) Mac without losing my songs

Been reading the support pages & I think I have this straight but I want to ask here just to be sure before I do it. Here's my story:
I'm going to be ditching my old iMac and start sharing my soon-to-be wife's eMac. Her eMac already has an iPod associated with it. I'm not worried so much about the music on my iMac (don't even plan on moving it to the new eMac) but I want to be sure I don't lose the music already on my iPod.
Now here's my plan: I intend to set up my own user account on her eMac. I'll authorize iTunes under that account my with my old Apple Store ID (and deauthorize my iMac). Then I'll set the prefs in iTunes to manually update my iPod. Now, here's the question: will my iPod get wiped when I plug it in to the eMac? Or will it recognize that copy of iTunes as being authorized under my login & leave my iPod untouched?
I hope I've explained the situation well enough. I'll clarify any rough points if it will help me be certain before I do this. And thanks in advance for your collective brain power!

In my experience you are doing the right thing by setting up a new user and having your ipod set to manual update... makes life easier!.. but even without that if you have your ipod set to automatic update I believe you can still link up to another computer without loosing your tunes as long as you check the right boxes when connecting...
If your set to manual update then you should have no problems. I've just linked my ipod (set to manual) to another machine without any problems no boxes to check no fear of loosing my songs!
If it's set to automatic syncing then you'll get asked a question like do you want to join the existing libarary or something.... basically check the appropraite option (double check before clicking!).
Basically all you are doing will be fine!

Everything messed up when moving to a new address

When I ordered my current verizon FIOS triple play, I was told by sales representative if I need to move, I can still keep my current contract (it is a two year agreement) and all services, that is one huge reason I siwthced it Verizon.
Now I'm going to move, everything start to screw up:
First, Verizon ask me start a whole new contract with higher price than my current contract and there is absolutely no way to keep my current service and contract,
Second, when I ordered my curretn TP bundle, part of the order is a free internet Router (it is not a rental fee waived! see my order details below), now verizon ask me to leave that router and pay monthly rent if I move. When I contact online customer service, they told me the 139.99 is installation and activation fee... it is obiously the 139.99 is price for router while 79.99 is for installation and 69.99 for activation; then she told me Verizon send new router agreement last year which I have never recieved......
One-Time Charges and Credits
FiOS Internet Installation Charge @ $79.99
Fee Waived
Wireless Router @ $139.99
Fee Waived
FiOS Internet Activation Fee @ $69.99
Fee Waived
As a result, If I'm not happy with all these additional fee and restrictions, I even have no choice to cancel the service since I signed two year agreement and I must per early termination fee; otherwise I must accept the rediculours new price with all new contract?
Just don't know what should I do now..

Hi zhangtinghere,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

14 days today trying to get a landline installed at my new address/ verizon keeps cancelling

If anyone can help me it is truly appreciated. Two weeks ago today I moved to a new address and was to have a land line. Called verizon two weeks prior, and thought there was no issue. Here I am two weeks later, and at least 6 cancellations later, and I still have no phone. I was very hopeful with the order put through yesterday, but again this morning it has been cancelled. There is Verizon in my apartment building as the office has Verizon.....I am exhausted trying to get this phone. I am disabled and I need a landline phone. What can I do?

That situation went from inconvenient to complicated quickly. Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled. I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned. Sorry this happened the way it did. Definitely not efficient.

TS4020 Can I change my iCloud email address name without creating a new account?

CCan I change my iCloud email address name without creating a new account?

Once you have created an iCloud account and chosen an @icloud.com address to go with it you can't change the address (short of creating an entirely new account).
However, all is not lost. You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

I ONLY HAVE ONE BLANK TAB ON TOP AND HAVE TO HIT CTRL T TO ALLOW A NEW ONE WITHOUT LOSING THE EXISTIN TAB. THAT NEVER USED TO HAPPEN. THERE WAS ALWAYS A PLACE i COUND PUT A NEW ADDRESS. HOW CAN I MAKE THAT ALWAYS COME UP?

When I do control T a new tab gets added and then a little one with a + on it. otherwise when I put a new address on the tab I have open changes and I loose what's on it because it goes to the new address instead of opening another tab.

Welcome to the discussions,
a manual backup should help to transfer your data and apps.
Disable autosync in itunes, connect your phone, right click on it in the device list and choose backup. iTunes will backup your phone without syncing and save data, pictures taken with the phone and settings to the new itunes library.
See what's included in this backup here: http://support.apple.com/kb/HT1766
After that, transfer your purchases the same way by choosing "transfer purchases", to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your phone got wiped during the first sync.
The rest of the data can be restored again from the manual backup you made before.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
Restoring: http://support.apple.com/kb/HT1414
Apps can be downloaded again for free, in case you missed some: http://support.apple.com/kb/HT2519

Moving to new address with airport extreme

Last year I moved across state. Yesterday I received an iPod touch. When I checked my location using the maps app the iPod touch told me that I was physically at the site of the home we moved away from 400 miles away. I suppose what is happening is that I have not put my new address in the airport extreme base station, but I'm not sure. Would you agree, and if so, how do I update that address in the airport extreme. I began to run the Airport setup utility and it asked if I wanted to create a new network - I actually didn't - I just wanted to put in a new address. How should I proceed? Of course, I may be totally off base with my solution. Thanks in advance for your help.

iPod Touch does access a database that helps it determine its location on the basis of known locations of WiFi access points it is connected to. For this scheme to work, the iPod touch needs to be in contact with a WiFi access point in its database - which are usually commercially run access points in urban areas.
As for your own Base Station - it won't be of much use in helping your iPod touch know where it is. WiFi access points like yours won't be in the database, and no - there is no such thing as an "address configuration" option on an Airport Base Station, so you can stop looking for it.

Change email address on printer to new address after moving.

HP Officejet Pro 8500A, Model #A910A Printer Product # CM756A
I have moved, have a new email address and I cannot find how to set my email address on the printer.
Using Mac OS Lion. Can print and scan and fax back to computer, but not send an email directly from the printer (with the scanned document attachment) I have gone into the set up countless times to try to change the outgoing email profile via HP Direct digital filing and the web site is constantly blank, goes nowhere., same for setting up HP digital fax. This is being done from the utility set up area in the web embedded server. This is the message I get:
You will be redirected to a secure (HTTPS-enabled) page.
If you encounter a message about an invalid security certificate, follow the instructions displayed to accept the certificate; you may be prompted to click Continue or OK (or a similar button or link). There is nothing here and is just a dead end.

It sounds like you are getting the prompt to click OK to be redirected to the HTTPS site, but you are not getting anythign after clicking ok.
You could try refereshing the page until it loads (it may take several tries) or try using a different browser.
The secure section of the EWS is not a true site on the Internet and it has a certficate that isn't really registered since it is not accessible outside of your network. Browsers can have an issue with this sometimes.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Do I need to return the old router from Verizon after I transferred to a new address?

Hello,
I was trying to return the old router that I had from my previous address. (They gave me a new one when I moved to the new house)
But I didn't receive the return label. Where can I obtain it, and what address do I need to send it to?
I tried calling the return department but I was on hold forever.
I googled and see some people said that they won't want it back, but some people said they do.
Please help..
Thanks,
Sylvia

fat10000y wrote:
Hello,
I was trying to return the old router that I had from my previous address. (They gave me a new one when I moved to the new house)
But I didn't receive the return label. Where can I obtain it, and what address do I need to send it to?
I tried calling the return department but I was on hold forever.
I googled and see some people said that they won't want it back, but some people said they do.
Please help..
Thanks,
Sylvia
As already said it depends on the model that you have. If you have an Actiontec they will proabably want it back, but if its an old Westell they won't.

Version 33, problems when moving tab to new window, then if you open a new tab in that window it doesn't switch to it unless you use Ctrl-Tab?

Version 33, problems when moving tab to new window, then if you open a new tab in that window it doesn't switch to it unless you use Ctrl-Tab.

Type '''about:preferences'''<enter> in the address bar.
Select '''General.''' Look for '''Tabs.'''
Turn on '''When I open a link in a new tab, switch to it immediately'''

SoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot

NSoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot4 I recently moved my X-Fi Elite Pro soundcard to a different PCI slot to accommodate my new large PCIE graphics card.
Prior to moving the card, my?original SoundBlaster install went fine without any trouble. When I booted up after relocating the card,?it was not detected at all. So I uninstalled my SoundBlaster driver software and?rebooted the computer?thinking that was necessary to clear any hardware configuration settings from the old install. This made no difference. I then discovered my card was not seated properly and corrected it.
Next I installed the SoundBlaster driver software. The installation proceeded and finished with a request to restart the computer. Once I did, the computer detects my card and starts the hardware installation wizard asking if I want Windows to search online for driver software. It does not recognize the just installed SoundBlaster driver installation. I have a dual boot setup and this happens in both WinXP Pro and Vista 32 Home Premium.
What's wrong here?

Forget it folks...couldn't wait for any suggestions so I just cleaned off my hard dri've and reinstalled everything. Works fine.

Error 'Invalid address style' when create new address Legal Entity R12

Hi,
Did somebody had the same problem like i do.
I am trying to create a new dutch address for a new legal entity in Oracle R12.1.1 Vision, but however hard i trying to do so i always received the error message 'Invalid Address Style' and i filled in all the required field.
When i tested with the country 'US' or 'Australia' is could create a new address without any problem.
I hope you can help me to solve my problem.
Thanks in advance...!!
Wim

Hello Sandeep,
You were right, I checked the dff for the address style and activated the once for the countries I needed and now I can create new address for the required countries by using the legal entity configurator.
Thanks for your help..!!
Regards,
Wim
PS: Incase somebody else has they same problem, let me know and i send you the worddocument i made with the solution

Moved to a new address - Activate without a Technician?

Similar Messages

Maybe you are looking for