Movemen tye for stock against SO (Unrestricted) during Sales return deliver

Hi,
I wanted to trasfer stock against sales order (unrestricted) during PGI of Sales return deliver.
Currently we are using Movement type-653 but it transfer stock to unrestricted location which we want to take against sales order-unrestricted.
Please suggest movement type for same or do we need to create new movement type for same.?
BR,
Ajit raut

As per my opinion , it is not possible.First you have to put the Stock in Unrestricted use then you can assign it to any Sales Order.
It can come in Sales order - Unrestricted Only when in Your Sales Cycle - Returns , you create a Returns Order wrt any Sales Order which is not Possible.
So better to do the PGR and then assign the stock with a new Sales Order.
Best Regards,
Ankur

Similar Messages

  • Error during sales return Delivery

    Dear Friends,
    I am Getting error while doing sales return processing in VL01n - Goods Issue.
    Error Message - Status of Inspection Lot 0600000002 / Partial Lot does not allow Goods issue.
    I have already done the settings in config, Assign Inspection Lot Origin to Delivery Type
    Also material code has been activated with the inspection type 06.
    What could be the reason for the error for goods issue for sales return?
    Regards,
    Anil

    Dear Anil,
          According to me - you have an QM activated so the stock sits in the QM stock when you create a return order. so before delivery QM has to verify the returned stock and has to transfer the stock to returnable stock / into unrestricted stock. SO consult with you QM Module person and do the return delivery.
    regards,
    Sudhir

  • FI documents during sales return & invoice cancellation

    Dear All,
    We are using two document types RA for sales return & RC for cancellation of Invoice. These documents are getting posted in Domestic Sales account.  We need to track them seperately and posted to two seperate GL A/cs. Do we need to have seperate document types for them apart from normal sales document ? What will be the account assignment to be done to have these postings done to new gl accounts ?
    Regards,
    Sadashivan

    Hi Kesh,
    The document type is common for sales as well as sales return.  Further, we are creating a new GL account for Sales Return now.  At present Sales and Sales return are commonly posted in domestic sale account. I wish to clarify that as the sales are captured through account assignment VKOA - ERL, the sales return has to be assigned through OBYC - VAX.  Is it correct ?  Like wise for cancellation of invoice is there any account assignment so that whenever the invoice is cancelled automatically posted to new gl account - "sales invoices cancelled "? That is instead of debiting sales we will be debiting sales invoice cancelled a/c credit customer a/c.
    Regards,
    Sadashivan

  • Plants abroad: Customizing for stock transfer between plants, EC Sales list

    Hello,
    Please advice how the customizing for tax codes (output and input tax) should be done in order to get the SJ documents (stock transfer proformas) listed correctly in EC Sales list. Now the SJ documents are listed correctly in VAT report (S_ALR_87012357) but are not listed at all in EC Sales list (S_ALR_87012400) - and the correct situation is when they are listed in both reports (the amounts should correspond with each other). The main question is how to set up correctly the EU code (values 1, 3 or 9) in the tax code settings for three tax codes below:
    1. output tax of departure country
    2. output tax of recipient country (destination ctry) and
    3. input tax of recipient country
    Pls note that 2 and 3 together form the acquisition tax of the destination country.
    Above three tax codes are now listed in VAT report but not listed in EC Sales list for departure country at all. SJ document should be listed in EC Sales list using the reporting country = departure country.
    Any valuable advices warmly welcomed,
    Kind regards,
    Slawek

    Dear Kumar
    Please check the links
    [Plants Abroad|http://help.sap.com/saphelp_46c/helpdata/en/e5/077f984acd11d182b90000e829fbfe/frameset.htm]
    [Plants abroad: Sales-specific settings |http://help.sap.com/saphelp_46c/helpdata/en/34/60b19dae724effe10000009b38f91f/frameset.htm]
    thanks
    G. Lakshmipathi

  • (Usage Decision )Stock Post To Unrestricted Use.

    Dear QM Expert,
    I create a inspection lot of Finished Good and inspection type is 04 used when take a decision in QA11 then the Inspection lot is not open and the message has shown.
    <b>The function you selected
    cannot be
    carried out:
    Access usage decision</b>
    When i use QA12 then message show is this,
    <b>You cannot perform this task because the usage decision has not been made yet.</b>
    But the stock is not posted To unrestricted use.
    I want to stock post or cancel the document but i cant cancel or reverse the document.
    Please suggest me the urgent bases what i do for stock post to unrestricted use.
    Once problem has been mentioned here that the logistic period has been closed and FI/CO period will be close after six days.
    thanks
    ufarooq
    Message was edited by:
            Shahzad Sami

    Hi,
    Follow these steps for the qm inspn procurement.
    1.Create Material Master Record with QM View.
    2.Activate QM Proc/ Specify Control Key 0001.
    3. choose Inspn set up and inspn type to be entered as 01 and set the active indicator.
    4. Create Q-info record with material / vendor.(qi01)
    5. Enter the release by date as 31.12.9999
    7.Create inspn plan(qp01) with usage 5 and status 4and enter the control key as PPQM.
    8.Choose the operation and assign the inspn characteristic / sampling procedure
    9.MD61/MD02/MD04
    10 Convert the Purchase requisition as Purchase Order.
    11. Receive the Material against the PO.
    12. In MIGO against PO receive the material.
    13.QM lot will be created
    14.qa02 check inspn plan / sample.
    15.qe51n results recording
        lot origin 01 mat no and execute results
    16.qa11 ud code select accept and chooseinspn tab page and type the qty to be proposed and save.
    17.stock will move to unrestricted use .
    Regards,
    nandha

  • Define Shipping Data for Stock Transfers Between Storage Locations

    Hi Guru,
    Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
    Purchasing --> Purchase Order -->
    Set up Stock Transport Order-->
    Set Up Stock Transfer Between Storage Locations-->
    Define Shipping Data for Stock Transfers Between Storage Locations

    The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
    It is for the transfer of stock between storage locations with any movement type.
    Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
    You have to create a internal Vendor and Customer.
    Hope it helps.

  • Return delivery for stock transport oder

    Hi
    I need better clarity on the following Return delivery process for STO.
    Step 1)Creation of intra company stock transport order with document type UB.
    Step 2)Goods issue from the Supplying plant (Movement type 641)
    Step 3)Goods receipt at the Receiving plant( Movement type 101-To quality inspection stock )
    Step 4)Posting return delivery at Receiving plant. (Movement type 122)
    On performing step 4) , the stock quantity and value are getting reduced at the Receiving plant, but the stock updating does not happen in the Supplying plant automatically. (i.e. Goods Receipts )
    Do we need to perform any other movements ( Goods receipts ) in the supplying plant so that the Returned stock will be updated with the return delivered quantity ?
    Please clarify.
    Gobinathan G

    Hi
    Thanks for your feedback.
    It worked well. On posting 122 , the stock was posted to "stock in Transit" of Receiving plant.
    When I reversed the goods movement by VL09, the stock was posted back to stock of supplying plant. ( Movement type 642 posted )
    Gobinathan G
    Edited by: Gobinathan Govindarajan on Dec 16, 2008 6:41 PM

  • Item Category Determination during Sales Order Creation

    Dear All,
    This is Chee Wee, i'm new to SD, i would like to seek for an advice for the topic related to Item Category in Sales Order.
    We have a material "Mat005" define as "Stocked" Item category in MM03,
    *Stocked means our MM team will always keep stock for the material.
    The document Item category assigned to this "Stocked" are "NoPo" --> No Auto Po creation and "AuPO" --> AutoPo  creation.
    During the SO creation for Mat005 with Qty50 and warehouse stock availale for 60, i'm wondering when i select the itemCat "AuPO", the system automatic changed to "NoPO", but when i change the order qty to 70, then i'm able to changed the itemcat to "AuPo"!!
    Can any Guru advice me what is the actual setting or configuration behind to determine which are the correct Item Category that i can choose?
    Thank you very much,
    Regards,
    Chee Wee

    Dear Chee Wee,
    Basically tem category will determine based on these key combination
    Item category group(Material master)+Sales document type(We enter doc type in the creation initial screen)--->Item category
    For Example NORM+OR--->TAN.
    As per your explanation
    I hope In your case stock availability also one of the factor in the item category determination.This might have done some enhancement.
    There are two item categories in your process one is  "NoPo" --> No Auto Po creation and  second one is "AuPO" --> AutoPo creation.
    the system automatic changed to "NoPO", but when i change the order qty to 70, then i'm able to changed the itemcat to "AuPo"!!
    60 Qty Stock available, you have created sales order for 50 Qt here requirement is less than stock availability so system will not allow you to enter AuPo item category Because there no need of auto PO creation for stock.
    When you created sales order for 70 Qty, stock available only 60 so there is shortage of 10 Qty.now system needs to allow to create Auto PO to procure the shortage stock of 10 Qty, so system is allowing you to enter Yaupon item category.
    There might be some work around kind take help of ABAPer to get the more details about your item category determination.
    I hope this will help you,
    Regards,
    Murali.

  • Problem in BAPI for stock posting from quality inspection  to unrestricted usage

    Hi all,
    I am using BAPI_GOODSMVT_CREATE for  stock posting from quality inspection  to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
    GOODSMVT_HEADER:
    PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
    GOODSMVT_CODE:
    GM_CODE:  ‘04’ .
    GOODSMVT_ITEM:
    MATERIAL = MATERIAL NO
    PLANT = PLANTCODE
    STGE_LOC = ‘WIP’
    BATCH = BATCHNO
    MOVE_TYPE   = ‘321’
    ENTRY_QNT = 100
    ENTRY_UOM =  ‘EA’
    ORDERID =  Prd ord no.
    After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
    Kindly help me.

    Hi Naveen,
    Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
    BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
    Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

  • Transfer posting for RT packaging to unrestricted stock transfer.

    Guys,
    I am having some stock in RT Packaging (501 M) and now I wish to transfer this stock to normal unrestricted. Pl suggest.
    Thanks in advance,
    Parag Mahajan

    Hi,
    I'm afraid you cannot post the RTP stock (special stock "M") to "common" unrestricted-use stoc.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b921143ad11d189410000e829fbbd/frameset.htm
    Which Goods Movements are Supported?
    The following goods movements (and the respective reversal or return movements) are defined:
    - Posting Other Goods Receipts to Returnable Transport Packaging (RTP) Stock
    - Posting Returnable Transport Packaging (RTP) Quantities at Goods Receipt for Purchase Order
    - Transfer Posting Between Storage Locations
    The transfer of RTP stock to your own stock is not supported.
    So, you can achieve your goal in two steps:
    1. Eliminate the RTP stock (502M)
    2. Receive it (e.g. 101; 501)
    Regards,
    Csaba

  • Single Step STO Mvt 301 for Stock transfer beteen Company code during Cutover

    Dear All ;
    I am Planning to use Movement type 301 ie single step STO Beteeen two different company code at the time of Cutover .Is it a feasible solution ?
    I am Currently handling a  Org Restructuring Project ,Where one company code will be broken into five different company code ( Including Old Company code ) ,and old som of the stock of old company code needed to be shifted to new 4 company codes .
    In this Context i am thinking to use 301 ,will it be a feasible solution ?
    I have tested in IDES ,It is working ,But I need to be confirm as there is hudge data to be migrated .
    Best Regadsl;
    Joydeep Mukherjee

    Hi Joy,
    You can do this in one step as you already have tested in IDES, but depends on your business requirement that in which way you want to handle your stock transfers either by using one step or two steps movement types or by using stock transport orders. Using STO is a good approach for stock transfers between two company codes.
    See the below link:
    http://help.sap.com/saphelp_45b/helpdata/en/a5/63391843a211d189410000e829fbbd/content.htm
    regards,
    anoop Singh

  • GR for order against a sale order, in MMBE

    Dear all Hi,
    I have made GR for order against a sale order, in MMBE X qty of stock is displayed as sale order stock, but when i check it for its reservation the system is not displaying the reference of sale order & also in MMBE screen it is sdisplaying sale order stock qty as X under unrestricted usebut correspondingly it not showing anything under Reserved column,
    Please help.
    thanks in advance.

    for material(say A) and plant combination In MMBE what you see is the stock against the sales order which is the result of GR with sales order as account assignment.
    Now reservation what you see in MMBE is the reservation made on material A by its parent matrials which my abe sales order account assigned or may not be assigned..\
    Hence these two are different meaning and consideration.
    please come back.

  • Standard stock report for Stock Commitments

    Hi gurus,
    Is there any standard report available to see the  Stock  like Reserved qty,stock transfer,scheduled for delivery against each batch in a same transaction like MMBE.
    In MMBE by selecting the Read Stock Commitments indicator we can get.
    the constrain is here we can able to see against only one material.
    if i goto MB52 i am not getting the above said stock type.
    Expecting Your Valuable Suggestions!
    Regards,
    D.K.Vijaya Bhaskar

    MMBE can be used as a report for individual material & MB5B is very useful Transaction Code as stock report for multiple material. It requires to be explored more & more, so that most of the stock report as per requirement is avialble.
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Print GR slip for GR against an Outbound Delivery

    Dear Experts,
    I have a requirement as below.
    Need to print GR slip for GR against an Outbound Delivery in VL02N (for Return Orders)
    What setting needs to be done?
    I donot see the GR slip check box in VL02N which normally exists in MIGO
    However, i need to print GR slip for such GRs in VL02N
    please help
    regards,
    Shetty

    Re: Printout during Goods Receipt
    See second, fourth reply and final post (which you've already found answer to via another thread).
    Regards,
    Nick

  • Material Ledger for Stock Transfer Postings

    Hi All,
    I have a question about the way material ledger is calculated for stock transfer postings (movement type 641). I will give an example to illustrate this issue:
    Material A has a Standard cost of $10
    Material B has a Standard cost of $8
    During the month 100 units were transferred from material A to Material B. This created a financial posting as follows:
    Credit Material A -          $1000                               
    Debit Material B -           $800
    Debit Price Difference    $200
    This price difference of $200 was used in the calculation of Actual cost for material B
    However, the Actual Cost for Material A was $9. I would have expected the system to use this actual cost to calculate the difference to be posted to material B. Hence the difference used in Material B should have been $100 {(9 – 8) X 100} and not $200.
    Has anyone had a similar issue, or know how the system resolves this (if at all)?
    Points will be rewarded for relevance.
    Thanks

    Dave, I see that your process is slightly different to mine. We do not revalue inventory at month end, instead the material ledger program posts the revalued amount to a reserve account and the actual cost is only a statistical entry. The material ledger calculation is reversed automatically in the new month and the standard price is used for valuation.
    I think this might make it difficult for the system to value STO's at actual. I may need to check with SAP.
    Thanks

Maybe you are looking for