Movement Statistics Report setup
I am doing the setups for Movement Statistics Report but no data is coming can any body help me.
Review Note: 400098.1 - 11i Movement Statistics Intrastat report is not generating any data
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=400098.1
Similar Messages
-
How to move a report from one account to another account
Dear all ,
How to move a reports from one account to another account.
These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
PuruHi,
You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
The data should be present in a Transport and you can import to Transport to any client using SCC1.
Contact the Basis team to know how to use SCC1.
Regards,
Aj -
Hi,
I am looking for a Vendor Statistics report developed by an ABAPER which basically shows how late a PO was, If full quantity was GR etc basically a Vendor Evaluation report,
Points will be awarded any Vendor Evaluation Type report will be helpful ALV format pref
Thanks
AdeelHi Adeel
you can get a start from this:
EKPO , JSTAT will be you might be helpful
Get the object number... for the order...
CALL FUNCTION 'STATUS_READ'
EXPORTING
client = sy-mandt
objnr = p_objnr
only_active = 'X'
TABLES
status = lt_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
SELECT txt04 FROM tj02t
INTO lv_status
WHERE istat EQ wa_status-stat
AND spras EQ 'E'.
ENDSELECT. -
Gather Schema Statistics Report taking more than 13 hours to complete is it normal?
I have run Gather Schema Statistics Report at 9 pm and it completed on 11am next morning. It almost took more than 13 hours, is this behavior normal.
I have used the following parameter.
Schema name: ALL
Estimate percent:50
Backup Flag :NOBACKUP
History Mode :LASTRUN
Gather Option:GATHER
Invalidate Dependent Cursor : Y
My database size is about 250 GB.
Please replyGather schema stastics is erroring out when i'm using the GATHER_AUTO option with 10%.
Here is the log file
+---------------------------------------------------------------------------+
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDGSCST module: Gather Schema Statistics
+---------------------------------------------------------------------------+
Current system time is 13-AUG-2013 10:42:12
+---------------------------------------------------------------------------+
**Starts**13-AUG-2013 10:42:12
ORACLE error 20001 in FDPSTP
Cause: FDPSTP failed due to ORA-20001: SYS_NTGNSVL1S+OCZGRAAHKD9MYG== is an invalid identifier
ORA-06512: at "APPS.FND_STATS", line 774
ORA-06512: at line 1
The SQL statement being executed at the time of the error was: SE
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
In GATHER_SCHEMA_STATS , schema_name= ALL percent= 10 degree = 8 internal_flag= NOBACKUP
ORA-20001: SYS_NTGNSVL1S+OCZGRAAHKD9MYG== is an invalid identifier
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 13-AUG-2013 10:43:29
+---------------------------------------------------------------------------+
I have used the following parameters
Schema name: ALL
Estimate percent:10
Backup Flag :NOBACKUP
History Mode :LASTRUN
Gather Option:GATHER_AUTO
Invalidate Dependent Cursor : Y -
ActiveSync Device Statistics report for users does not show Device Phone number
HI ,
I have trying to run a Active-sync Device Statistics report to get all the details for active Sync users, but report show only last four digit of device phone number for few users and for most of the users its blank.
Is there way if we can get Device Phone number for active sync users.
Thanks,
Pradeep KumarHi,
Yes i have tried all of these transactions, these all relate to individual sales orders or production order costs.
Im looking for a report showing the costs for a range of sales order line items, exaclty like KOB1 but for sales orders. KVBI does exactly what I want but the material filed is not populated.
Is there a way to populate this field as part of the settlement?
Cheers
Phil. -
What is "Default" in Usage Statistics report detail?
I am running RoboHelp Server 8 and am outputing the "Usage Statistics" report which has an option to report on Browsers and Operating Systems. In the results for both is a category called "Default" (see images below). Does anyone know what this means? If you can answer that, maybe you can also tell me what the "Unknown" operating system is? I suspect this maybe an Apple Mac user as I know one of our users has tried accessing the help through the application installed on a Mac.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on TwitterFurther to my previous post, I can confirm that the "Unknown" operating system is definitely NOT an Apple Macintosh user. Having run the report on another area, a seperate "Macintosh" category is displayed thus leaving me in the dark again. If anyone can shed some light on this and the "Default" category I'd be very grateful.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter -
SP2-0611: Error enabling STATISTICS report
Hai
I created table test2 with 20,000 records,and trying to set autotrace on in order to get statistics ,i got the below error.
SQL> SET AUTOTRACE ON
ERROR:
ORA-24315: illegal attribute type
SP2-0619: Error while connecting
SP2-0611: Error enabling STATISTICS report
Any idea about this
Regards
mohanSP2-0619 Error while connecting
Cause: An error occurred while AUTOTRACE attempted to make a second connection to the database instance.
Action: Check that the database limit on number of active sessions has not been exceeded. -
Recruiters statistics report- using APPLICANT statistics report
<b>Hi experts!,
I want to get the reports of the Personal officer ( recruiters) in Applicant Statistics report. But in the standard report I can choose only one personal officer and get the report. Could any one help me how to get the reports for all the personal officer ( for eg. 10 persons).
The standard report prg is : REPORT RPAPL005
could any one help me...
Thanks and regards,
Sunil</b>Thx for the reply,
Prakash, but I want a report which consists of name of the recruiter and their reports on applicatios...in applicants reports I tried but I can view overall view of the report but not like a report which displays the name of the personal officer and their report.
Could you please elaborate your help and let me know the solution.
regards,
Sunil -
Hi -
Under KM /Admin Guide / Content Management / Reports, I see a Statistics Report described:
Use
You can use this report to evaluate and search the content of KM repositories using different criteria. The report searches all repositories, regardless of whether indexes exist.
You can use this report to answer the following questions:
· How many files larger than 5 MB are located in the documents repository?
· How many ZIP files are located in the documents repository?
· How much memory do the files that have been created beneath /documents/Public Documents in the last 14 days need?
My question: Where can I find this report? I see it under Content Administration / KM Content, but where would I actually run it so that I can specify the settings I want to use when I run the report, e.g., "Maximum number of results"?
Thank you!
Message was edited by: Jo De HartJo,
I'm glad I could help you! Would you be so kind to thank also "SDN"-way? For this just<b> mark the thread as a question</b> an rewards some points! See this link for some more information regarding the "Points Reward System": Spread the Love!
Thanks,
Robert -
Hello All,
Can anyone explain how to execute Garnishment Statistics report . I would like to get the employees numbers with name who have an active Garnishment . when i execute it, i just get Personnel subarea with number of employees who have an active Garnishment. I would like to know, is there a way to get into detail of employee number and name? Appreciate your help.The Garnishment Statistics Report is programmed not to give employee details, but rather Statistics.
Check in SAP's Menu, there is an other Garnishment Report that gives details on employees and their garnishments, including the history of remittances and current debt.
The big caveat is that there is probably strict security on that report as only a few persons should be able to see all that confidential information. -
BEA-473225: Aggregator rejected statistics reported by server...
I am getting occasional errors and warnings associated with the WLI-Monitoring Runtime subsystem in my WebLogic logs supporting my ALSB installation. Errors and warnings include:
BEA-473224 Aggregator did not receive statistics from...
BEA-473225 Aggregator rejected statistics reported by...
BEA-473233 Timer (checkpoint) has been triggered...
I could not find reference to these errors in any message manual. Can anyone provide additional insigt into what these messages indicate?I am using ALSB version 2.6. Of the three errors (warnings) mentioned in my original post, the one occurring most often is BEA-473233. I see this warning just about every two hours. About once or twice a day it does seem to work and no warning message is generated. The other two messages (BEA-473224 and BEA-473225) have shown up about 12 times each in the last 2 weeks.
I did find reference to these messages in the ALSB documentation, but their description is a bit thin. The messages appear to indicate some sort of communcation issue between the managed servers, but I cannot detect any adverse impact from these messages. There is no other indication of communication issues between the managed servers in the cluster that I can see. -
Incident Management Reporting Setup
Hello!
I try to setup the incident management reporting.
I can't find any help or guide for this process (only http://help.sap.com/saphelp_nw70/helpdata//EN/51/7dd0c003414e80a6847f5c7437ea63/frameset.htm). Is there something else?
In webdynpro "Incident Management Reporting Setup" I have to configure the RFCs (you can open it with SOL work center --> Incident Management --> Reports --> Message Reporting --> Setup)).
The first field is called "RFC from Solution Manager to BW System", contains NONE and I can't change it.
The second field is called "RFC from BW System to Solution Manager". Here I created an RFC entry, but now I can't change it too. Is there a trick to edit this fields once again?
Thankx and regards,
RalphHi,
Would this be helpful ?
Please follow the path below which provides details on the setup of
incident management in EHP1.
https://websmp110.sap-ag.de/okp
- SAP Solution Manager 7.0 - EHP1 (free of charge) <In left tree>
- opeeration with SAP solution manager
- Monitoring of Mission-critical Processes: Incident Management
- Incident Management - Initial Configuration
Hope this helps,
Cheers
SH -
Resource Statistics Report of KM
Has any body ever used the Resource Statistics Report of KM ?
I have a couple of questions on the same
1. Does it work with File System Repository Manager?
2. I basically want a log report for the following operations
a. user uploads/creates a document
b. user deletes a document
c. user edits locally / edits online
Is it possible to track the above operations at a user level?
I have tried various combinations in the "parameter" tab of the report but am not able to achieve what I want.
If anybody has any experience with this report, kindly share it.
Thanks in advance,
Akhilesh
Message was edited by: Akhilesh MahtoHi,
Second issue:
open your report> goto parameter or create new report add the location and goto parameter tab>cheact List Matching Items: . It will show the results.. I got the result.
Regards,
Kumar -
Add properties to the Resource Statistics Report (Parameters)
Hello everyone!
I need to generate some reports based on predefined properties I created to classified the documents.
For example, I want to know how many documents were classified to the property Brazil, or to the property Germany...
There are some properties already defined on the Resource Statistics Report (Parameter), like create by, modified by... I wanted to know if there is any way to add my properties to the list.
thanks,
LuisaHi Luisa,
You can develop your own report, you can read about that in this link:
Implementing Customer Reports Using the KM Reporting API
This tutorial describes the implementation of customer reports using the Reporting API of KM
Sample for implementing the reporting API.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b30b090-0201-0010-829d-e988d093ac65
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/implementing customer reports using the km reporting api.article
Patricio. -
First movie download report...
Yesterday I successfully downloaded my first movie from iTunes directly to my HD and this evening we watched it on my 40" Sony. I was very impressed with the quality of the video considering the source.
My hardware for this was a MacBook with 4MB. I purchased a mini DVI->DVI cord at my local Mac store for $20. I mated this cord to a DVI->HDMI cord which I inserted into my open HDMI port. For sound I bought a 6' 1/8" stereo jack->L/R RCA plug which went into the same port as the HDMI. To my eye, the video looked at least DVR quality and perhaps slightly better.
My TV has 3 HDMI ports and I'm now maxed out with my cable, Blu-Ray and MacBook inputs. Anyone considering buying a flat screen should strongly consider getting one with at least 3 HDMI ports.
Re the performance of my MacBook, I started with a nearly full battery. When the movie ended (around 2 hours), I only had about 15 minutes left on the battery gauge. Normally I get between 4-5 hours of play. The hard drive ran continually while the movie was running. I wasn't able to figure out how to turn the screen off on my MacBook. So, lighting that screen had to "eat" some battery. I read somewhere that the laptop screen could be closed when using an alternate video screen, but when I tried that, the computer went into sleep mode and stopped the movie.
For those of you that might be interested in trying this, Apple also sells a mini DVI-> VGA or to S-video or to A/V video. They all cost $20.
This whole thing was an experiment as I will be buying an Apple TV unit in a couple of weeks. Still, it's nice to know that movies can be played in this manner. Also, I was impressed with viewing pictures in this manner. Even my Excel spreadsheets were very easy to read. This mini DVI output will certainly get some use from me in the future.Hi,
LOAD-OF-PROGRAM is the first event triggered but it is internal event.
This event keyword defines an event block whose event is triggered by the ABAP-runtime environment when an executable program, a module pool, a function group or a sub-routine pool is loaded in the internal session.
INTIALIZATION is the first report event get triggerd.
This event keyword defines an event block whose event is triggered by the ABAP runtime environment during the flow of an executable program, directly after LOAD-OF-PROGRAM and before the selection screen processing of any existing standard selection screen. This gives you the one-time opportunity to initialize the input fields of the selection screen, including those defined in the logical database linked with the program.
Regards,
Sankar
Maybe you are looking for
-
Fn+b keys don't work after installing windows7 home premium.
I already installed the IDT Audio but the Beats icon does not show when the fn+b keys were pressed. What should I do? Product Name: Pavilion dm1-4000au Product number: QG411PA
-
updated itunes and now get the following message. this copy of itunes is corrupted or not installed correctly. please reinstall what has caused this? in my downloads folder i have itunes64Setup.exe do I just run this ? or will this overwrite my exist
-
Wishes for future UI/usability development
Since one year i've changed my office-equipment from windows based to os/x based. Many wishes came true, but one very important not: I have to waste too much time with updates and reboot after updating. I hate it, to come to office, starting my macbo
-
Regrouping XML Data that includes two paths
Hi all, Apreciate your inputs on the issue I am facing: Using the xml below, I want to first group by <ID> <-- used <?for-each-group:GROUP;./ID?> and then within the <ID> group by SDATE - EDATE combinations And AMT to show the sum of the SDATE - EDAT
-
STRUCTURES of LOGICAL DATABASE?
STRUCTURES of LOGICAL DATABASE? please explain