Moving a Secondary Domain and Its Associated GWIA

I need to free up a server for my GroupWise 2014 move from stand-alone hardware to a brand new SAN/Virtual environment and I could use some tips so I don't screw it up by forgetting something (and I don't want to do it the hard way, any tips to make it an easy thing would be helpful). I'm looking for tips on how to move the domain, not on virtualization.
Here's the dirt:
I have a primary domain set up on its own server, running a GWIA named "GWIA2" (for outgoing mail only)
I have a secondary domain on its own server, running a GWIA named "GWIA" (for incoming mail only). The secondary domain has no post offices, just the GWIA. It's only purpose is to accept incoming mail and forward it to the primary domain. This is the server I need to free-up... I need the hardware.
My plan at this point is to move the secondary domain (and GWIA) to the same server that the primary domain (and GWIA2) resides on temporarily, so I can use the secondary domain's server as a "virtual" server starting point, once I get the newly freed-up server into my virtual environment, I can then migrate the rest of my GW system over. Once the migration to virtual is complete, I can then move the secondary domain back to its own server (if I even really need to).
My questions:
1) Do I even need to move the secondary domain and GWIA? Should I just delete it and run with one domain? I'm in a state government situation and we get a LOT of incoming mail when we are in session. This is why I set up two domains in the first place; one for incoming mail and one to handle outgoing (the primary domain handles the outgoing mail because the volume is considerably lower than incoming mail).
2) Does it even make sense to have a separate server for incoming mail and outgoing mail after virtualization?
3) If I do need to move the domain, what steps would I need to take? I'm thinking about things like reconfiguring the links, moving the objects in GWadmin console, IP Address changes (I do not need to change the MX record, that points to my SMTP filter, which then forwards the messages to my secondary domain - I'd just need to point it at the new IP address).
Any other thoughts would be appreciated. I'm just now beginning to form the outline of what I need to do and I thought I'd get input from you guys to help me solidify my plan. Any advice or thoughts will be graciously welcomed.
PJM

laurabuckley wrote:
> Further to that I think, but stand to be corrected on this, that two GWIA's on
> the same box, if you are not binding exclusively to two separate IP's, is not
> going to work due to port conflicts.
Correct - if you have them bind to separate IP addresses, they should work, but
otherwise only one GWIA per server. I personally am not sure that separate
GWIAs are all that important. Two domains are nice though for disaster
recovery, but if they are both on the same server, the redundancy is not really
there.
Danita
Novell Knowledge Partner
Are you a GroupWise Power Administrator? Join our site.
http://www.caledonia.net/register
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

Similar Messages

Problems Removing Secondary Domain and agents

I had a secondary Domain and a gwia and webaccess agent running on an vm box. The box had issues and crashed and I was unable to recover it. I am now left with a secondary domain and two gateways that I can cannot get rid of because the edir objects are gone. I get this error when I try to connect to the gateways....E-Directory counterpart of this object does not exist. The objects are not in edir. I am also unable to delete the domain because it has subordinates left under it. What are my choices for cleaning this out. I really would like to get this resolved before I try to upgrade to GW8.
Thanks so much for your help!
Rodney Neal

This can be fairly difficult given your situation of not being able to recover the server so you might consider opening a service request with a partner or Novell Technical Support. I will try to give you the steps to follow though here..
1. You need to first get the object back in the tree. To do this, you must graft them in by selecting a container in the tree and selecting Tools|GroupWise Utilities|GW/eDIr Associations|Graft GroupWise Objects. Follow the wizard through all the steps. This should get you the objects back though I do not understand why they would be gone in the first place with just a server crash. I assume that eDir was on other servers as well so wondering if you manually deleted the objects but either way, that is what you need to do.
2. This is where it can be a bit tricky. You need to create a temp folder on the server and rebuild the secondary domain into that folder so that you have a database to work with. Just go to properties of that secondary domain and change the UNC path to point to the temp folder and then under GroupWise Utilities|System Maintenance choose Rebuild Database. In the end, there should be a wpdomain file in that temp folder.
3. Copy in all the .dc files from your primary domain root folder into this temp folder.
4. You now need to Release that secondary domain from the GroupWise system. To do this, make sure you are connected to the primary GW domain and then right click on the secondary in question and choose GroupWise Utilities|GroupWise System Maintenance and then there is an option to release secondary. This also brings up a wizard to walk you through the process.
5. Now the secondary should show up in your live system as an external system. You just need to go under Tools|GroupWise System Operations|External System Synchronization and delete the new link it automatically created.
6. Now you can just delete the objects. You may need to delete them separately from the tree afteward.
Let me know if you have any more questions or need clarification.

Changing my Apple ID and its associated email address

For the past 6 years or so I have used the same Apple ID and email. It started out as an Aol account and is now my [email protected] as my Apple ID. I want to change my Apple ID and its associated email account to Gmail since that is what I use more often now. I see the option to change Email Address has next to it "This will be your new Apple ID", which is exactly what I want to do. I have two questions:
1) I will change the Email Address field to my Gmail address. Will this create any sort of confusion with the DRMed songs and videos I purchased in the past?
2) For posting on these discussion boards I have yet another Apple ID (created kind of by mistake, a long story). Is there any way I can merge the two?

I attempted to do the the same (similar) thing yesterday (Sept 2nd, 2010).
I wanted to change my current Apple ID used for iTunes Store (which was created years ago when I bought my wife an iPod) to be my Apple ID (created when I joined the Apple Developer program way before iTunes).
After changing the information and clicking the "Done" button, I received an error message that was positioned on the "Apple ID" box, which stated "this is not a valid email address". I assumed that the "email pattern filter" was erroneously attached to the Apple ID input box, so I contacted iTunes Store Customer Support.
*iTunes Store Customer Support response:*
+I'm very sorry for the inconvenience, since "<my.user.name>" is already an Apple ID it cannot be used for another iTunes account. At this point, it can only become it's own iTunes account.+
I'm posting my followup question below, in case anyone on the forum has these same questions or has any experience with actually doing what Apple proposed - create a new account to be used with an existing iTunes Library - and has any experiences they might wish to share.
*My followup question to iTunes Store Customer Support (waiting for reply):*
So, what are the implications of creating a new (second) iTunes account?
- Will I keep my same iTunes Library (i.e. Will all previous items be visible, when using the new account to purchase items)?
- How will this affect devices (iPhone, iPod) that are synched to the current iTunes Library?
So, I guess what I'm asking is; "How tightly coupled is the iTunes "account" information bound to the Library"?
I don't want to create a situation where:
- My iPhone and Apps gets wiped out when I sync because it sees a different "account name".
- My Library looks like I have "zero" items (Music/Videos/Playlist) because I've logged into iTunes with a different "account name"
I'm attempting to only change the iTunes Apple ID and email associated with the account for purchasing items through the iTunes Store. I want to preserve all other aspects of the current set up.
Is this possible?

Which table stores relationship of business roles and its associated roles.

Hi,
I want to know the table that stores the relationship between a Business role and its associated roles.
Please note that i am aware of the table GRACBUSROLESNAP that stores the business role relationship corresponding to a request id and this is not what i am looking for.
I want to know the table which stores the definition for business role.
Thanks & Regards,
Khush Bafna.

Hi Khush,
I think table GRACROLERELAT is used to store business role definition.
Best Regards,
Aman

What is the best way to create a SSRS Report with Header Data and its associated child data

So I have Member Information...Member ID...Member Addressing...etc.. I want to display this in the top part of the report like...
Member Name:
Member ID:
Member Address Line 1:
And then below I want to report on all the claims associated with a Member ID that is chosen by the Parameter. Obviously the Claim Data will be in Table format. Do I necessarily have to associate the Member Information with the Claim Information or simply
use the same parameter? And what is the best Toolbox item to use to display the Member Information on top?
Any help or guidance is greatly appreciated by this newbie.
Thanks for your review and am hopeful for a reply.
ITBobbyP

Hi ITBobby,
According to your description, you want to display all Claim Data for each Member. Right?
In Reporting Services, we can use a table to display those Claim Data and make them group on Member ID. If you want to display the Member Information, we can put the data fields on parent group level. Then we can use create a parameter to filter the Member
ID we need. We have tested this scenario in our local environment. Here are steps and screenshots for your reference:
1. Create a DataSet(DataSet1) which contains the data fields of Member and Claim.
2. Create a table and drag the Claim data into the table.
3. In Row Group. Right click on Details and add a parent group.
4. Select Member_ID in Group by.
5. Right click on the textbox of Claim data. Select Insert Row->Outside of Group-Above. Drag the MemberName into the inserted row.
6. In Report Data, right click on Parameter-> Add Parameter.
7. Type Member_ID in Name and Prompt, select allow multiple values.
8. In Available Values, select get data from a query. Choose DataSet1, select Member_ID in values and label. You can also set this in Default Values if you need.
9. Save and preview.
Reference:
Understanding Groups (Report Builder and SSRS)
Report Parameters (Report Builder and Report Designer)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Search help on table and its associated text table.

Hi Experts,
I am trying to create a serach help on T161-BSART field.
I have to restrict the table entries from T016 with some conditions and so I cannot use the standard F4 help.
To display the text also in the F4 help to the user, I have created a database view on tables T161 and T161T and associated it with my search help.
But I am unable to put the language ( T016T-SPRAS ) as login language , thus I am getting multiple entries in the F4 help for all languages maintained in the table.
Is there some way to restrict the database view on logon language or I will have to craete a search help exit.
Thanks in advance.

Please create a "help view" in the selection condition tab put your condition as System variables, i.e. fields of structure SYST, can also be defined for maintenance and help views. You can also use the prefix SY- instead of the prefix SYST-, that is SYST-LANGU and SY-LANGU are the same.
a®

Table link between IBASE and its associated products

Hi,
If we go to the transaction IB53 and enter an IBase number, all the products asssociated with the IBase will be listed out.
Similarly, if we have the IBASE number how can we track the associated products via tables.(i.e) the table link between IBIBIBASE and COMM_PRODUCTProduct_id
Thanks in advance.
-Aaru

In two steps..
1. Convert Product GUID using FM 'GUID_CONVERT'
CALL FUNCTION 'GUID_CONVERT'
    EXPORTING
      iv_guid_x16 = product_guid
    IMPORTING
      ev_guid_c22 = sysuuid-c22.
2. Get the IBASE from view v_ibinr where objnr = sysuuid-c22

How can I extract both my mp3 file and its associated .jpg out of itunes

Hi everybody,
I'm a DJ and once a month, I like to share a set of mine with my friends. For each set, I also make a dedicated flyer.
I usually put the recorded set in Itunes, then I add the flyers using the "Illustration" (I'm using a French version) tag.
Then, I drag the new file (both the .mp3 and .jpg) on a folder on my computer and I can see the flyers and not the normal Mac icon for music file.
I had always worked, but today I tried to do the same but it doesn't work anymore. In Itunes, my mp3 file contain the flyers, but when I drag it to another folder, the flyer is not there anymore.
What happened???
does anybody know a freeware to associate a mp3 with a .jpg?
Thanks for your help,
Have a nice day
Jean

Bonjour.
I'm not firm with the french iTunes but I'm sure its similar to all other iTunes in the world, except the language of the menus.
You can include the cover (Illustration) inside the music file. mp3, AAC or Lossless makes no difference.
To do so go to:
The song (or songs) by marking it (them) in the main iTunes window. Then right click mouse (or two fingers on touchpad) and choose "Information"
In the information window go to the tab called "cover"
Move the wanted picture via drag & drop into this window. The best format for such illustrations are 500 x 500 pixels. If yours are bigger then iTunes will resize it to fit.
Click on save
If you will change the cover for more than one file (song) you will be ask "you are sure to change all files"
Simply press ok
After that the cover will show up in iTunes and will be exported within the file if you pass the song to others..
There is no reason to place the cover / Illustration in the Music folder cause iTunes uses for imported covers the "Album Artwork" Folder in the Library.

Leads and its associations with Custom Objects 4-15

I have been trying to create a Real time report with Lead associating with Custom Objects 3 and 5. But the report does not show up any data. I know that we cannot associate Custom objects 1,2 and 3 with Lead. I wanted to know if we can associate Lead with Custom Objects 4-15 or not ?

Yes. You have to define them in CO5 Layout.
You should see Name, Contact and Custom Object 04 (you may have renamed it). Not the Id field.
Then when you add THE CO5 layout to Contact Related section, you can add new association between Contact and CO4.
Don't forgot to enable the Access Profiles in Contact, CO4 and CO5.

Is the program from FiuneDeaalSuoft, and its associated links, causing problems?

A program from FiuneDeaalSuoft somehow appeared in my Firefox Add-0ns as of 2 days ago (08212014) according to Control Panel-Programs. I don't recognize it, but possibly I mistakenly clicked on an acceptance interface without realizing it. The ad re-directs which it caused were onerous and invasive. The re-directs first started appearing when I received a message advising me to update some other programs. I have a list of most of them. It seemed to start I went onto a Windows web page, for Windows Live Movie Maker,
< http://windows.microsoft.com/en-us/windows-live/movie-maker-file-types-faq?wlexpid=FC1B09C67C184525852C59C15A0F465E >
which had 3 block ads at the top from FiuneDeaalSuoft. The links for those three ads were:
< Microsoft.iYogi.com > phone 855-558-2498,
< Microsoft-Windows.iYogi.com > phone 855-558-2498, and
< Microsoft-Support.pchelpdesk.co > with no phone showing in my screenshot of the ad but it is probably the same as given later herein, 855-677-5531.
I removed the FiuneDeaalSuoft program from Add-ons, but I still seem to be getting some pop-ups and re-directs. Looking in Control Panel, I see that the program name is slightly different: FuineDealSOfti from FineDealSofT. This program was extremely aggressive and persistent. In Control Panel, I see other programs which I am also concerned about. IDT Audio from IDT has been on my computer a while, but I can't remember much about it. Pinger from Pinger, Inc. shows that it was installed in Dec. 2013 before I bought the computer. WidgetServ 1.0 from Softomate, LLC. is through Firefox. WinSpeed from 24soft installed in April 2014 is another program which I don't know much about. Can anyone offer further analysis and review or comment of any of these programs, please, with advice as to whether you have found them useful or problematic?
The software from FiuneDeaalSuoft will be uninstalled from Control Panel since I am convinced that it is very invasive and a lot of trouble. An Install Manager from dwnllistsoft.com was part of the pathway. It wanted to re-direct to < http://uhi.inureknittingrectrix.com >, which had code sections referring to < plh.tractionize.com >; < WhiteLabelBidRequestHandlerServlet >; < www.srv2trking.com >; < LTSanitizer.aspx >; and < www.ascentive.com >.
The original message seemed to be one which advised that "Video Update Recommended".
Another had the Firefox logo and advised that "You are currently browsing the web with Firefox and your Video Player might be outdated". The webpage address was:
< http://www.lpmxp2129.com /7655407A3F26415F243E342D4D472B54AE35515F1068A175E1CFD6181CD0B859E09383E5EAA7EDFE90932B3B86A7E9D8?tgu_src_lp_domain=
www.dnwyoursoft.com&ClickID=426139843&PubID=1258 > (which could have a small editing error).
A smaller front screen appeared as an overlay which said "Recommended" and then " You are currently browsing the web with Firefox and it is recommended that you update your video player to the fastest version available. Please update to continue."
Some other urls which appeared were:
< http://www.srv2trking.com/LTSanitizer.aspx?u=http%3a%2f%2fwww.ascentive.com%2frun%2fclick%2fSEC_CPA%2fgo%2fFFTV%3fc1%3d08_107761803_ed31ad73-fc16-40f5-9cad-cccc044ea1f4
%26c2%3da-0-2464-2418-27346-0-223-0_177593 >;
< https://interyield.jmp9.com/InterYield/optout.do >;
< http://download1181bucket.com/go/windowsupdate?_alc=1&_cb=1&_ep=1&_sd=1&adprovider=advertisecom&source=advertisecom_driverupdater-us-dt-ron6&
subid=66385-1017_1008_us&subid2=interyield+jmp9&servpixel=1408768365016_1408768324035_109_469_5987611_1 >
which offered a Windows 8 update with a small front screen overlay message saying "WARNING! Please Install Update To Continue." while the main screen had a message that it was a "Windows 8 Update" with the admonition that "You are currently using - Windows 8 - which is now outdated... Please install the latest update to enhance your computer's security and performance." (part of the window screen capture was missing the full text, so I had to guess part of the message);
(NOTE that the previous entry may have a disconnect between the url and actual screen, since i could not reproduce the result);
< http://pmptrk.com/t/o/12/ > was another redirect;
< http://updatingdriversnow.com/ujp1/?source=MG_EBT-RED&kw=ubid >
another which offered a Java Update (13?) which had a front screen "Java Recommended" and "It is recommended to have Java in order to proceed.";
checking on a contact link for the Video Update,
< http://www.lpmxp2129.com/eQBQL8o9/videoupdater/contact.html >
was the url;
< http://pcupgradenow.com/su/en/4/a9551d18bc46aa01436d6fbb3caf46adc84f910f073379322921d15717c8caa4:1408769323/?a=anothervars&b=39500638&sid=ADV-sft-555&filename=Software_Update&uid=1408769323444_1408768975263_125_415_5966399_1 >
appeared with a front screen overlay message saying "UPDATES RECOMMENDED! It is recommended that you install the software to ensure your browser is the latest version. Please update to continue.";
the previous link had "Transferring data from static.getclicky.com" in the bottom left corner of the screen;
another screen with url
< http://pckeeperapp.zeobit.com/land/7.13/index.php?affid=mzb_196.8233409.1408767556.2.mzb&utm_source=ldmpcts&utm_medium=popunder&utm_campaign=pck_ldmpcts_15aug_ff&utm_term=&utm_content=&userDefiner=mzb_2380&installer=&trt=33_22526071&alert=301&tid_ext=antivirus >
was very realistic (and for all I know is legitimate), showing a logo for PCKeeper, a front screen block titled "Important Message" with "Your PC Performance is Poor." and a "Fix Now" selector button;
the main screen of the previous url had the overhead title of "How to Fix The Windows 8.1 error" which is somewhat peculiar since "The" is capitalized while "error" is not;
also the previous screen had 1. a picture of an attractive smiling young man with a reference book titled "Microsoft Certified Technology Specialist", 2. several links for various PCKeeper options, and 3. at the bottom, block ads for AAA and alleged referrals from "The Wall Street Journal", "MAXIMUMPC", and "Business Wire" and 4. a warning that "You may be presented with an optional offer(s) during INSTALLATION" which was the link followed another link for "learn more";
< http://pchelpdesk.co/cp/support-for-microsoft.php?affiliate=63783-86_777 >
was a web page for pchelpdesk.co which gave a phone number of 855-677-5531 for "Instant Tech Support for Microsoft r-copyright Products by Expert Technician";
< http://techieschoice.com/l2/support-for-microsoft.php >
gave a phone number 855-677-9945 with another convincing webpage which even had several testimonials;
< http://windows.microsoft.com/en-us/windows-live/movie-maker-file-types-faq?wlexpid=FC1B09C67C184525852C59C15A0F465E >
was one of the original webpages from which this
detour first began with a header of "What kind of files can I use in Movie Maker?";
< http://aff2click.com/?a=939&c=8108&s1=14714782&s2=w.ascentive >
which I do not have a screenshot for;
< http://apps4u.pw/v14/?entry=&exit=&i=eyJ0IjoxNDA4NzcwOTQ1Mjk5MTU4MzA4LCJjIjoiNTM4ZWQzZGNiYjMyMTM2ZDE3YzI3ZWUwIiwidSI6IjA5MzQ4ZWM2
IiwiZSI6MC4wMjEsIjEiOiJ2MTQtQ29udHJvbCJ9&url=gt.penga.info >
had the header "Recommended Download!" followed by "You are currently browsing on Chrome 35" and "Please Install the RECOMMENDED SOFTWARE -< which was the link > to Confirm You are Using the Recommended Version." along with other embedded links, options and disclaimers;
< http://landing.driverrestore.com/ldimp/02/en/?brand=Windows&subid=US|EN|windows*download >
for which I have no screenshot;
< http://lp.get-soft.com/mpc____________/?o=42&campid=14403&creaid=6104&reqid=571734621 >
with no screenshot;
< http://trk8.com/base.php?c=109&key=5555c230910ebedab5128d543147c7c6&keyword=.ascentive.co > with no screenshot; and
< http://downloadjust4u.com/download/firefox3/ > with no screenshot.
I may have missed a couple or so urls, especially the intermediate transition urls, since they tended to change very quickly. Any of my screenshots are freely available if they can offer any further value.
I am still uncertain if I am making this a bigger deal than it actually is. Knowledgeable feedback from anyone would be appreciated.
Thanks to everyone at Firefox. It has been my favorite browser for a few years now.
James

hello james, please don't open multiple questions for the same issue.
i'm going to close this thread - please continue in your original one at https://support.mozilla.org/en-US/questions/1016716
thank you!

New Secondary domain communication issue

We are currently migrating our GroupWise system from GW8 on Netware to GW14 on SLES11.
The primary domain has been migrated (using Danita's guide) and I've created a new secondary domain, and Post Office and it's been mostly trouble free (see my previous thread on this forums)
I've created another secondary domain, and installed a GWIA on it. Everything appears to be working, and it routes e-mail as it should.
However, there definitely is an issue that is particularly demonstrable when creating a new user.
Test 1:
> Connected to PO Domain
> Create user
> Check user exists
> Connect to GWIA Domain - new user does not appear.
Test 2:
> Connected to GWIA Domain
> Create user
> User appears but greyed out
> Connect to PO domain - user present and been tested working.
So it appears that the GWIA Domain is able to communicate out, but isn't receiving comms from other Domains.
I've quadruple checked the link configuration and the GWIA domain is set to communicate by direct IP (both inbound and outbound) to the other Domains and vice versa.
I've also checked the permissions on the wpdomain.db file and they appear to be identical to those on the other domains.
At the moment I can resolve these by running a rebuild on the GWIA domain - which is obviously a bit of a 'nuclear option', and any new users created, moved, etc necessitate another rebuild.
Any ideas how to troubleshoot further, or anything obvious I've overlooked?
Thanks in advance.

This has been a bit of epic SR with Novell, down to being in totally different time zones and having little overlapping work time, but it's fixed.
I've included all of the fault finding and fix attempts in case these help someone else.
Fault finding:
> While connected to the Primary domain I changed the description of a secondary domain that was having the issue.
> Checking the logs on the secondary domain, we found the message was getting queued to /wpcsout/ads/2
> Checking this folder I found 678 files - so definitely an issue of admin messages not being processed for some time.
Fault Fix 1:
On Secondary domain:
> delete contents of wpcsout/ads/2
> rename wpdomain.db on
> rebuild secondary domain
As soon as I started the MTA again, a message was immediately created in the wpcsout/ads/2
In pending operations an entry was listed with a creation date of December - so we'd found our culprit.
Fault Fix 2
On Secondary domain:
> Followed Novell Document ID 7013078
To paraphrase the document -
> Stop the MTA, rename wpcsin, wpcsout and mslocal folders
> restart MTA
Again, file reappeared immediately in wpcsout/ads/2, and pending operation came back.
Fault Fix 3
On Secondary domain:
> Stop all agents on server
> rename domain directory
> create new directory with same name
> copy wpdomain.db and any .dc files from old domain folder to new.
> copy wpgate folder from old domain folder to new
> copy .mta files from old domain folder to new
> restart agents
Again, file reappeared immediately in wpcsout/ads/2, and pending operation came back.
Final Fix
> Clear any pending operations on the secondary domain, if possible (Ours was clear since it seemed to not be processing any messages any way)
> copy .dc files from primary domain directory in to the secondary domain directory
> carry out renames as per doc 7013078
> Restart secondary Domain MTA
This fixed it. I've changed the description of a secondary domain, and the change has gone through.
I have also created a user and it does now appear when connected to all the secondary domains
Quite why the .dc files gave it the kick it needed our support guy or the backline engineer who was also assisting couldn't explain, but it is apparently something that has been found to fix it.

Can GWIA7.02hp1a be upgraded w/o upgrading Domain and GWWEB

I have a GW7.02hp1a system with several POs, GWWebAccess, GWIA and 2 Domains. All the POs are under the primary domain. The secondary domain is on a different server and it only houses the GWIA and GWWebAccess. I am not at a point where I can upgrade the system as a whole, but I have had problems on and off with mac email getting sent to the GWprob directory because of a filename problem. I have found on this forum that the problem is probably fixed by 7.03 and up. Can I run a patch on the gwi and leave all the rest of the system at 7.02hp1a? Thanks for your help.

OTScon wrote:
> I have a GW7.02hp1a system with several POs, GWWebAccess, GWIA and 2
> Domains. All the POs are under the primary domain. The secondary
> domain is on a different server and it only houses the GWIA and
> GWWebAccess. I am not at a point where I can upgrade the system as a
> whole, but I have had problems on and off with mac email getting sent
> to the GWprob directory because of a filename problem. I have found
> on this forum that the problem is probably fixed by 7.03 and up. Can
> I run a patch on the gwi and leave all the rest of the system at
> 7.02hp1a? Thanks for your help.
For the most part, yes, but the server that runs GWIA will need to have
all of its components upgraded. So you'll need to upgrade the
secondary domain and WebAccess as well.
Novell Knowledge Partner
Enhancement Requests: http://www.novell.com/rms

How to uninstall Windows Intune Center and its related programs permanently from the Windows 7 64 bit OS?

Hi,
I am Srikar,
I installed Windows Intune End Point protection in my PC (Windows 7 64bit).
I am not able to uninstall it.It is eating all the resources and my pc is getting slower down day by day.
I tried uninstalling via Control Panel->Programs and Feature->Windows Intune End point Protection.
Its uninstalled,and after some time,it is installed automatically in my PC.
Don't know whats happening.Please Please any one guide me.My PC is not even responding some times.
Regards,
Srikar Ananthula,
Srikar

Yes, removing a device will uninstall Windows Intune Center and its association with Windows Intune. Check this:
http://onlinehelp.microsoft.com/en-us/windowsintune.latest/hh949661.aspx [Removing a Device by Using the Windows Intune Company Portal], and
http://technet.microsoft.com/en-us/library/hh441723.aspx [Add Computers, Users, and Mobile Devices to Windows Intune].
Hope this helps..
Chaitanya( Twitter |
Blogs )
This posting is provided "AS IS" with no warranties, and confers no rights.

Web Access in secondary Domain creating *.tmp files on root

I have a Groupwise 7.01 Webaccess server on a secondary domain and am seeing temporary files being created on the root of the sys volume and dump files ie _T-oo960.tmp and CORE0.dmp. Checking the dates shows they are from March May and June I ahd not seen this before and want to delete them.
Does anyone know why they are being created and how to stop them ?

jpross,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem with Cross-domain SSO, NTLM and ITS to R/3

Hello,
We are using EP 6.0.13.0 on a Windows environment. We have an ITS running WebGUI/ESS/MSS in another domain and that is the same domain where the R/3 and BI systems reside. We have configured NTLM authentication using IIS web server 6.0 and the IISProxy 1.6.2. We have configured SSO with the backends using the same ID as in the MS-ADS. Almost everything works fine.
The problem is that when we use the NTLM logon VIA the IIS to the portal, and then navigate to a WebGUI service transaction we are prompted for login. When we refresh the portal screen and try again - it works.
We have configured the mdc.hosts and are using the sendSAPSSO2Cookie.asp to generate the cross-domain logon ticket.
I have read that ITS may require the PAS be set up but I thought that was only used when you are going directly to the ITS (leveraging the NTLM authentication) - not when you are going through the portal.
Does anyone have some experience using ALL of the SSO features (i.e. SSO, cross-domain support, ITS, windows integrated authentication)?
We have though about the relax option for the domain but it does not apply as our domains are:
SERVER1.domain1.com and SERVER2.domain2.com
... so relaxing would not help unless we relaxed to the ".COM" which is unreasonable.
My regards,
Judson Maizels

Hi JUDSON
well i'll give one easy solution
make a alias under host file reside in winnt\system32\drivers\etc directory which has same domain name
i.e
SERVER1.domain1.com server1.mydomain.com
SERVER2.domain2.com server2.mydomain.com
it's works in my schenario we have a same system landscape
as you
regards,
kaushal

Moving a Secondary Domain and Its Associated GWIA

Similar Messages

Maybe you are looking for