Moving background to camera but only at 25%

I want the background to move with the camera but at a reduce positioning, say 25% of the normal movements. Can this be done?
Thanks for an answers, using AE 7

Thanks Dan, although I am getting an error when I place it on the position of the layer I only want to move 25%.
I get the error 'AE warning: Class 'Layer' has no property named 'P' Expression disabled.'
Have I done something wrong?
Cheers

Similar Messages

Updates all the photos (cameraroll) in iCloud or is it just photo stream when you sync? I have 5000 photos in the camera but only 800 in the stream and I would like to save them all. How to do?

updates all the photos (cameraroll) in iCloud or is it just photo stream when you sync? I have 5000 photos in the camera but only 800 in the stream and I would like to save them all. How to do?

Plug your iPhone into your Mac and open iPhoto. Transfer the photos from the phone to your Mac.

Two cameras, but only one works at a time, need help

I've gone over the messages here but not found any answers to my type of problem. I have two WVC54GCAs both have static IPs on my lan and I can view them both fine from there.
I forwarded the port for one to 47624 and the other to 47625 in my router at home and in the camera configuration I specified to use these alternate ports instead of the default 80 port. When I get in to work and try to view them over the internet by their ip address and port# (e.g. http://22.22.22.222:47624) I get a timeout error, but I can see one if I go to port 22.22.22.222:80 (even though the port I specified in the camera setup was an alternate port). I used dyndns open port testing tool (http://www.dyndns.com/support/tools/openport.html) which shows 47624 and 47625 are both open ok.
I can log into my router on 22.22.22.222:8080 from work and the router logs show that the dyndns tool connected to the router via these ports upon testing. I was using a Netgear router and thought that might be the problem, so went out and got a Linksys wRT54G2 router to see if that worked better, but have the same issue as with the Netgear. Here's the weird part, if I go into the router from work and change one of the cameras to forward to port 80 instead of the alternate port I'd set for it, I can view that camera on port 80 despite the camera config still set to use an alternate port. So then when I take the first camera off port 80 in my router and change the second one to port 80, I can view the second one as well that way. I have Comcast as my ISP and a Motorola SB5100 cable modem and can't figure out why I am unable to bring them up over the internet using the alternate port settings I specified. I've spent a lot of time on this, I'd really appreciate any help or other suggestions on what to do.
Solved!
Go to Solution.

As far as I know, all Comcast modems are just bridges...no firewalls in them at all.... The other possibility is that your IT dept at work is blocking the traffic...have you tried this from any other place outside your LAN?
Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
D-Link DSM-320 (Wired)
Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
SonyBDP-S360 (Wired)
Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
IOmega StorCenter ix2 1TB NAS
Linksys WVC54G w/FW V2.12EU
and assorted wired and wireless PCs and laptops

I make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

i make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

What you could do now is break up your video into smaller parts and render them out, then assemble them again as a whole.
I know this is not the best fix, but it might work.
You can duplicate an edit in the main screen, then delete the last bits and export,
do the same for the other half.
Then import the two bits (or more if you need) in a new edit.
Out of curiosity, can you post what format the video is in?
Copy a video straight from the camera to your computer.
Open it in Quicktime player, and with out playing type Apple + i
or Control + i for PCs
It should tell you lots of info about the video, and might help us to see what is wrong.
This is what it looks like:

My video's have moved a few times so I have many of the movies showing up 4 times. But only one of the 4 is the real path. How to I get rid of the invalid paths in mass? I know I can get rid of them one-by-one but I want to do a bulk clean up.

I have many movies. I have moved them a few times. Now each movie shows up about 4 times in the video list but only 1 of the 4 is a valid path. How can I get rid of the invalid one in-mass. I know I can do them individually but it would take too long. So I want to do a bulk clean up so all the links are valid but I can't find a way to do it.

Install iTunes Folder Watch and set its option to check for dead tracks on startup. This will root out any tracks that are no longer in your folders, and can add any that are in your folders, but not in iTunes.
tt2

HT3819 I am moving back home to live ,currently I have ipad2 ,4s iPhone ,wife 4s and daughter iPhone 5 ,pad 4th gen and iPod touch ..all different iTunes account s but only one invoice which is mine ...can we share and if so how ?

I am moving back home to live ,currently I have ipad2 ,4s iPhone ,wife 4s and daughter iPhone 5 ,pad 4th gen and iPod touch ..all different iTunes account s but only one invoice which is mine ...can we share and if so how ?

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

Thanks in advance..apple newbie here. Have 12 photos/videos on camera roll, but only 3 appear on photostream (which is on), how do i get the rest over so that i can see them on apple tv. thx so much

Thanks in advance..apple newbie here. Have 12 photos/videos on camera roll, but only 3 appear on photostream (which is on), how do i get the rest over so that i can see them on apple tv. thx so much

FAQ photo stream http://support.apple.com/kb/HT4486

I moved Creative Suite 5 to a new computer, deactivated on the old, activated on the new, but only Illustrator and Photoshop will open. The rest of the suite will not open. How do I fix this?

I moved Creative Suite 5 from my old MacBook Pro to my new MacBook Air and followed the instructions for deactivating on the old and activating on the new but only Photoshop and Illustrator will work. I need to also access InDesign, Acrobat, Dreamweaver and Fireworks. Is there a way to fix this? Problem with the MacBook Air is that is doesn't have a disc drive so I had to transfer via external hard drive.
Cheers.

The problem is that you need to install CS5 from an installation file or installation disc. You can't just copy files because there are lots of supplementary files that don't get put in the right location.
You'll need to use the Adobe Cleaner to remove all the stuff on your new computer:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then download an installer for CS5:
Other downloads

HT4847 I'm new to iPhone and iCloud... I have lots of pics on my iPhone but only some appear on my iPad, they're in Camera Roll on the phone but random ones only have come into Photos on the iPad - can anyone help? Thanks!

I'm new to iPhone and iCloud... I have lots of pics on my iPhone but only some appear on my iPad, they're in Camera Roll on the phone but random ones only have come into Photos on the iPad - can anyone help? Thanks!

Welcome to the Apple Community.
Photostream when enabled will only add photos from the camera roll that were taken post photostream activation. (Photostream does not currently share video)
Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.

I try to save or delete photos from some SD cards that I use in trail cameras. The cards are unlocked, but only allow me to read files. Also, is it unusual for ad tabs to pop up in Safari every time I click on the tab I am using?

I try to save or delete photos from some SD cards that I use in trail cameras. The cards are unlocked, but only allow me to read files. Also, is it unusual for ad tabs to pop up in Safari every time I click on the tab I am using?

I try to save or delete photos from some SD cards that I use in trail cameras. The cards are unlocked, but only allow me to read files. Also, is it unusual for ad tabs to pop up in Safari every time I click on the tab I am using?

I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long. I purchased a 3 banded AV extension but it doesn't work. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.

I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long and I need an extension cord. I purchased a 3 banded AV extension but it doesn't work. I have been told that I need an extension cord that has AV and Mic to enable the remote shutter release to work with the extension cord. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

The camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

the camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.

I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only with wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only to wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

My eom lightning charger says its unsupported and acts like a knock off and apps appear to be running in background draining battery but I can't see them. Upgraded to iOS 7 phone only lasts 1/2 day. Notifications are all off.

My eom lightning charger says its unsupported and acts like a knock off and apps appear to be running in background draining battery but I can't see them. Upgraded to iOS 7 phone only lasts 1/2 day. Notifications are all off.

Crazybioteacher wrote:
Not to sound like a jerk but this is my 3rd iPhone and I hit the usual fixes.
And we would know that based on the initial posting based on what?

I ordered Office 2011 with my MBA, but only the trial version came installed - and no product key was ever emailed to me or included in the shipment. Three calls each to Apple and Microsoft have not solved this.

I ordered Microsoft Office 2011 with my Macbook Air, but only the trial version came installed - and no product key for the full version was ever emailed to me or included in the shipment. Three calls each to Apple and Microsoft have not solved this and I am at wit's end. Each company blames it on the other - I don't care whose fault it is, I just want the product key so I can use Microsoft Office! Please help.

You should have received a DVD in the box (with the MBA).
See: https://discussions.apple.com/message/12805337#12805337
Call AppleCare (they need to send you a DVD, which has the Product Key printed on the sleeve).

Moving background to camera but only at 25%

Similar Messages

Maybe you are looking for