Moving configuration between BW 3.1C to NW2004s

Hello,
Is it possible to move BW configuration (ie, cubes, ods, infoobjects, etc) from BW 3.1C to NW2004s via transport?
If not by way of transport, how about XML?
Essentially, we are exploring the advantages/disadvantages with upgrading an existing BW3.1C system that has been around since 1.2B vs. a new 2004s instance with migrating just a subset of the components in the current BW 3.1C system. Anyone have any thoughts on that?
Thanks in advance,
Donald

Hello Donald,
unfortunatley a transport between different release is very problematic and I belive it will not work.
XML is a good idea, but I believe not all of the components like transfer and update rules are exported from the "old" 3.1C system.
The only way I see migrate the whole system and delete the not need components afterwards.
Best,
Michael

Similar Messages

Moving configurations between machines - WL 6.0

OS: Solaris 8
JDK: 1.3.0
WL: 6.0.0
I was trying to move a working configuration domain from machine A to
machine B. Machine A and B have different system passwords and are not
located in the default
location.
I am encountering the following:
The WebLogic Server did not start up properly.
Exception raised: java.lang.SecurityException: Authentication for user
system denied in realm weblogic
java.lang.SecurityException: Authentication for user system denied in realm
weblogic
at weblogic.security.acl.Realm.authenticate(Realm.java:209)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:229)
at
weblogic.security.acl.internal.Security.authenticate(Security.java:113)
at
weblogic.security.SecurityService.initializeSuid(SecurityService.java:293)
at
weblogic.security.SecurityService.initialize(SecurityService.java:123)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
These are the following things I tried to resolve the issue without success.
1) Ensured that the password in password.ini corresponded to the system
password on the new machine.
2) Copied fileRealm.properties from config/mydomain on the new machine to
the new configuration domain location.
This is what I had to do to start the new server:
1) Copy config/mydomain to newlocation/config/newdomainname
2) Copy config.xml from old machine to new machine overwriting original
mydomain's config.xml
Are there any hidden files/directories that are causing this problem?
Is there a more straightforward remedy than having to copy mydomain?
Thanks in advance,
Bob Nordlund

Thank you for the information. The file is SerializedSystemIni.dat.
I copied it from wl/config/mydomain to my new instance and it solved
authentication problem.
"Michael Girdley" <----> wrote in message
news:[email protected]...
>
>
There is a .dat file that is included as well. You should try to copythat
and see what happens.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Robert Nordlund" <[email protected]> wrote in message
news:[email protected]...
OS: Solaris 8
JDK: 1.3.0
WL: 6.0.0
I was trying to move a working configuration domain from machine A to
machine B. Machine A and B have different system passwords and are not
located in the default
location.
I am encountering the following:
The WebLogic Server did not start up properly.
Exception raised: java.lang.SecurityException: Authentication for user
system denied in realm weblogic
java.lang.SecurityException: Authentication for user system denied inrealm
weblogic
at weblogic.security.acl.Realm.authenticate(Realm.java:209)
atweblogic.security.acl.Realm.getAuthenticatedName(Realm.java:229)
at
weblogic.security.acl.internal.Security.authenticate(Security.java:113)
at
weblogic.security.SecurityService.initializeSuid(SecurityService.java:293)
at
weblogic.security.SecurityService.initialize(SecurityService.java:123)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
>>
These are the following things I tried to resolve the issue withoutsuccess.
1) Ensured that the password in password.ini corresponded to the system
password on the new machine.
2) Copied fileRealm.properties from config/mydomain on the new machine
to
the new configuration domain location.
This is what I had to do to start the new server:
1) Copy config/mydomain to newlocation/config/newdomainname
2) Copy config.xml from old machine to new machine overwriting original
mydomain's config.xml
Are there any hidden files/directories that are causing this problem?
Is there a more straightforward remedy than having to copy mydomain?
Thanks in advance,
Bob Nordlund

Stream Configuration between different 11gr1 and 11gr2

I have oracle downstream set-up between two DBs both are 11gr1, i want to upgrade my my target DB to 11gr2. I want to ask whether my streams set-up would work after this or not.
OR
Is it possible have streaming between two version of oracle.
I shall be V thankful for you guidance.

Hi,
Yes it possible to have streams configured between 2 different versions.
Anand

Configuration between SAP PI and BPM in SAP PO

Dear Experts,
I am working on SAP PO 7.31 and want to carry out configuration between SAP PI and BPM in SAP PO. I carried the post installation
activities in NWA i.e. CTC.
Helplessly , I could not find any documents and notes to refer the configurations.
Regards
Rebecca

AAEx configuration:
Advanced Adapter Engine Extended (AEX) - Installation and Configuration - III
Configuring SAP BPM and PI runtime:
Configuring Message Processing from PI to BPM - Process Orchestration - SAP Library
Sample BPM
NetWeaver BPM for System-to-System Message Orchestration (Including Migration of ccBPM to NW BPM)
Hope this helps

ALE configuration Between HR and FI system

Dear All,
We have HR system on ECC6 and FI system on 4.x version,
i have to do ALE configuration between these two systems , please guide me what bapi's , idocs and what background jobs i need to run on FI system or HR system
please advise at the earliest.
Regards,
Najeeb ..

http://searchsap.techtarget.com/general/0,295582,sid21_gci1130337,00.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAIS/CABFAIS.pdf

Copy configuration between company codes tool

Hi,
I would like to know if we can copy configuration between company codes? If yes, how do we do that? I know there are some third party tools available, but couldnt recollect now. Any guesses?
Thanks,
Abdul

Since it are more than 200 customers, a manual operation isn't very efficient.
As I understand, no standard SAP programs exist to copy multiple customers from 1 company code to another. A new CATT will have to be created.
Does anyone have this kind of program, otherwise I will create it from scratch.
Thanks in advance.
Best regards,
Danny

ODI 10g configuration between Hyperion 9.3

Hi,
I have to pull the data from Hyperion Essbase, planning via ODI 10g.Please help me out how to configure between Hyperion and ODI 10g.
If you have notes please send to my id [email protected]
Thank You,
Prasad

Have a read of my blog as I have covered the steps - http://john-goodwin.blogspot.co.uk/2008/12/odi-series-extracting-data-from-essbase.html
Cheers
John
http://john-goodwin.blogspot.com/

LR5 stopped moving files between folders

Hi everybody,
I've noticed today that my LR5 stopped moving files between folders, I select files I want to move and drag them over to a new location like I always did before with only difference is now nothing happends, no messages with errors, nothing... I tried to google it and couldn't find anything related to my problem.
I'm using Windows 8 x64. I checked the permissions on all the photo folders and everything seems to be correct. I also run LR under admin rights, so there shouldn't be any OS related issues... in addition, it was working just fine till today.
I hope you can at least point me in right direction to dig more info on the problem with my LR5.
Thx!

Hi everybody,
I've noticed today that my LR5 stopped moving files between folders, I select files I want to move and drag them over to a new location like I always did before with only difference is now nothing happends, no messages with errors, nothing... I tried to google it and couldn't find anything related to my problem.
I'm using Windows 8 x64. I checked the permissions on all the photo folders and everything seems to be correct. I also run LR under admin rights, so there shouldn't be any OS related issues... in addition, it was working just fine till today.
I hope you can at least point me in right direction to dig more info on the problem with my LR5.
Thx!

It stopped sending mail and moving messages between folders, junk messages stopped being moved.

Recently, Thunderbird stopped sending mail and moving messages between folders, junk messages stopped being moved.

Further notes (different user, same problem):
* This is a problem that started in Thunderbird 32
* This involves both automatic (filter) moves and manual moves
* This includes use of keys and hotkeys (the delete key, for example)
* Restarting Thunderbird does seem to "reset" the problem... for a while. I notice the problem most when either I've been away from the computer/program for a while or when waking a laptop computer from a sleep or hibernation state.

Moving apps between screens

I'm having trouble moving apps between screens. I can move one app but then if I try and move another, I drag it off the side of the screen but the screen doesn't change. The only workaround I have is to move an app to the dock, change the screen with a swipe, then move the app out of the dock back onto the new screen. Is anyone else having this problem?

I thought this was broken on my iPad after upgrading to iOS 4.2. After messing around, I found that if I move an icon around on the screen and hold it at the edge of the screen for a few extra seconds, with the edge of the icon slightly off the screen. Then the screen will change.

Synching configuration between ECC and GTS

Is there any way we can automatically synch configuration (e.g.countries, regions) from ECC to GTS?
Thanks in advance.

Transaction SCU0 lets you compare configuration between systems, based on a number of ways of selecting the items to compare.
I am not sure if it offers any way to build a transport of the differences, or remotely update the target system. At least it lets you know what is different.
Andrew

Several environment and transfering configuration between them

I am trying to get some information about how could we have more than on On Demand environment... like Development / Production and transferring configuration between them... I undestand that the data I could export/import... but how to deal with the configuration ? A customer has available more than one environment ?
Txs. for any help.
Antonio

Hi, As of now there is no import / export facility available for configuration related changes. These changes has to be replicated manually only
-- Venky CRMIT

Moving files between folders is very slow

Hi, I have an iMac 2011. Processor: 2.7GHz Intel Core i5/ Memory 4GB
OS X Yosemite, version 10.10.1
After I change my OS from Mavericks to Yosemite, moving files between folders is very slow.
For example, if I move one jpg file in Desktop to Pictures folder (or just any other folders like Trash), it takes about 3 seconds.
When I was still using Mavericks, it made that Ding sound and transferred files right away. However, now, although it makes the Ding sound right away, the file is still there for 3 seconds.
I tried to clean up my mac using many apps, but they never fixed this problem.
I've also tried what I saw on this one thread. OS X File Transfers Very Slow
Go->Connect to Server then type "cifs://server-address" but it says there is a problem and did nothing. (maybe different issue)
Please help!

There may be other issues, but you installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

Modification dates change when moving/copying between hard-drive and flash

I use a flash drive to store most of my work-related documents on. That way, I have them when I'm at school (on a Windows XP computer) and at home on my Mac OS 10.3.9. I
try to occasionally back-up my flash drive by dragging it's contents to my Mac. Copying in this direction USUALLY retains the appropriate modification date.
However, if I move things from the Mac to the USB drive (I occasionally make changes to a file on the Mac when my flashdrive isn't handy), the modification date changes to the copy/move date. Is there a way around this? It alters the information about the file and sometimes makes a version look newer than another version of a document. When in reality, it’s older--it’s just been moved/copied and the date changed.
I often move things back and forth for backup purposes, but if it keeps changing the dates on it’s own, it’s impossible to tell which is REALLY the
most current copy/version.
Is there a fix so that copying and moving files between volumes does NOT change the modification date of the file?
Powerbook G4--12 in.--1.33 GHz Mac OS X (10.3.9)

Hi, teacher. When my Lexar JumpDrive Secure is formatted as a MS-DOS volume so a PC can read it, the last-mod dates of files that I copy to it are changed to the date and time of copying. When it's formatted as a Mac OS Extended volume, the original last-mod dates are copied to it unchanged. Looks like you can thank Bill Gates for the inconvenience: apparently it's a DOS file system "feature". Don't you wish you could use Windoze all the time?
On second thought, the files really are changed when you write them to a DOS volume, because the DOS file system has no place to store the metadata about your files that a Mac pays attention to and a Windoze box doesn't. So when you write Mac files to a DOS volume, that metadata — which is part of each Mac file — is simply discarded, causing the last-mod date to change.
Message was edited by: eww

Intel Macs & G5s: Problems when moving projects between them

An earlier post* suggesting complete compatibility between the latest FCP in a G5 and in an Intel Mac may be in error.
We are experiencing continuing crashes using our Intel Mac when we work on projects that were originally either imported or partially rendered in the G5.
It has gotten to the point where we feel we must keep projects completely isolated from each other: Either it is a "G5 project" or it is an "Intel Mac" project. Moving projects back and forth between the two leads to problems such as:
The Intel Mac does not recognize any renders done in the G5...
The Intel Mac crashes when rendering 'G5' projects...
The Intel mac crashes when compressor goes to work to export sequences to mpeg...
The G5 works fine with Intel Mac-originated material: It is only in the Intel Mac where we have these problems.
Both systems are up-to-the minute on their OS, security updates, and FCP versions. We are using variously 720p/30 from the JVC GY-100UA and 1080i/30 from the Sony Z1U.
Our questions are:
Is anyone else experiencing similar problems moving projects between a G5 and an Intel Mac?
Is anyone moving projects between the two platforms and experiencing NO problems at all? That information would be just as valuable, and very welcome.
Apple FCP development team: Is our experience unique or have you had other reports like this? Any idea what could be causing our problems -- and what we can do to fix them?
* http://discussions.apple.com/thread.jspa?messageID=3604812&#3604812
Intel MacPro Tower, 3gHz, 8mb Mac OS X (10.4.8) Also a G5 Tower, 2x2.5ghz, single core

Scott,
Welcome to the discussions!
I have had no problems moving my G5 projects over to my MP.
You can not move render files between machines.
When you changed systems, did you use Migration Assistant to transfer your files over to your new Mac Pro? You might need to install from the disks in order to achieve native Intel performance. See if you installed Final Cut 5.1 on your G5 then it installed the PPC code... if you put that drive into your Mac Pro or used Migration Assistant to move the app over it is still the PPC code... When you install from the installation disk, Installer determines what system you are installing on (PPC or Intel) and that's what it installs. This goes for all of your "Universal Binary" apps...
In the System Profiler app. under Software/Applications
Final Cut Pro "kind" should be Universal on your MP.
The FCP development team do not read these posts, only users do.

Moving configuration between BW 3.1C to NW2004s

Similar Messages

Maybe you are looking for