Moving Images and All Data between 2 Connected Macs via LR 3?

I have an older MBP 17" and a couple year old Mac Pro, both running OS 10.5.8, which are sitting next to each other and I can transfer data wirelessly.  Both running Lightroom 3.4.1.
I have about a year of photos in Lightroom on my MBP and I'd like to be able to open up Lightroom on the Mac Pro and transfer or otherwise Import those photos, metadata, and the various versions of the photos I've tweaked.
What is the best way to do this?  Do I choose Import in Lightroom on my Mac Pro or is there another procedure that might avoid whatever pitfalls exist with that method?  I've wanted to do this for quite some time but am afraid of screwing something up and losinig valuable images.
I'd appreciate hearing from people who have successfully accomplished it.
Thanks,
Greg

Fuji F30 just came to the market. The correct driver for that camera may be missing in 10.3.9. which is probably older than the F30. In case you have Adobe Photoshop or Photoshop Elements, you could download the latest update and probably have the F30 supported in that way (?). The same thing could help with reading the card correctly. This is my experience with other digital cameras.

Similar Messages

  • Ipod Synced with PC and all data lost

    Hi, I have a new Ipod classic 120 GB. I normally use it with my macbook and all was good till yesterday my brother synced it with a PC and all data was lost. My Ipod has a few mp3 music flies which i cannot delete and gives me error code 61. It also refuses to be recognized by my macbook again although when i connect the itunes open in my macbook but doesnot read the ipod and does not sync. I have even tried to restore. The ipod pluged in icon appears on the screen. Any suggestions to help me get my data back from my macbook itunes would be much appreciated.

    DId you sync you iPod on another computer?  If so the photos are gone.
    Unless you synced/backed up your iPod after you had taken the photos and the backup still has the photos, the photos are gone.  You can go to iTunes>Preferences>DIvices and see the date of the backup.

  • HT201269 I have new iphone and all data were restored but my music! How can I add my music from Itunes and new iphone?

    I have new iphone and all data were restored but my music! How can I add my music from Itunes and new iphone?

    Connect the old phone to your computer, right click on it in iTunes, and choose Transfer Purchases. That should put all of your music in iTunes except any tracks that were not purchased from iTunes. If you have any such you will have to retrieve them from the original source, or see: https://discussions.apple.com/docs/DOC-3141.
    Apple also has this tip for copying data from an old phone to a new one.

  • How do I place a fixed image and show it between two pages like the Global on Page 3 (LOE)?

    How do I place a fixed image and show it between two pages like the Global on Page 3 (LOE)?

    Ohoh, I do think so. It's the trick. Thanks
    BTW, How about including a widget within real time RSS feed?

  • Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software, Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software

    Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software, Trying to connect with my father on Facetime and all we get is connecting but never connect. Have updated the software

    Hello trailblazer59,
    The article linked below provides some useful troubleshooting steps that can help get FaceTime working on your iPhone.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    Cheers,
    Allen

  • I have updated my iphone and all  data have gone including photos contacts and notes .is there any solution? I am about to syncope!

    I have updated my iphone4 and all  data have gone including photos contacts and notes .is there any solution?

    All data that was on your iPhone should be on your computer.
    All photos that were transferred to your iPhone from your computer should remain on your computer and can be retransferred. Photos/videos captured by the iPhone can and should be imported by your computer as with any other digital camera - especially before installing an iOS update. Re-transfer these photos from your computer as with any other photos available on your computer.
    Contacts and notes are designed to be synced with a supported application on your computer, and there are some free email accounts that support syncing contacts and notes over the air.

  • Master Data and Transaction Data For DB Connect extracted Data...

    Dear Experts,
    I have been working on SAP NetWeaver BW 7.3 and for the first time I have extracted data from Oracle DBMS by using DB Connect. I have successfully extracted data of a View namely Sales_View into BW by creating a DataSource. This View has about 100 fields and I have been told that this view consists of Master Data and Transaction Data too. For my further reporting needs say building a Dashboard or InfoSpace I have to design a DSO and InfoCube for this DataSource. I'm bit confused about the Master Data and Transaction Data of this DataSource.
    1. Should I create all custom InfoObject against all fields of DataSource for DSO and InfoCube design?
    2. Do I need to create and load the Master Data for all InfoObjects or I need to create or load the Master Data for only those InfoOjects which will be   
         used for drill down or reporting in Dashboard or InfoSpace?
    3. Do I need to load the Master Data manually by creating Flat Files and using these files for Master Data loading for required objects?
    4. How should I approach the designing of DSO and InfoCube?
    I will appreciate your inputs in this matter.
    Many thanks!
    Tariq Ashraf

    Thanks!

  • HT1655 my i pod shuffle (3rd genration ) is not seeing in itune and all data is erased from there.

    hi i try to reset ipod shuffle(3G) via itunes but as i chossen dan all data got erased from ipod and now i can connect my ipod to itunes

    The three music came with your operating system.
    Sync is only oneway, from PC to your device.  Unless you have the music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
    You can only transfer Purchased music over to Itunes on your PC.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    As for you own music, you may have to use a third party software.  A good Free one is called Sharepod which you can download from Download.com here: 
    http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

  • Display all dates between date range (Time Dimension left outer join Fact)

    All,
    I have done some searching around this issue but within all the posts regarding date variables, date prompts and date filtering I haven't seen one exactly answering my issue (maybe they are and I just dont have my head around it correctly yet).
    My report requirement is to allow a user to select a start day and an end day. The report should show all activity between those two days - AND display 0/null on days where there is no activity. That second part is where I am getting hung up.
    The tables in question are:
    TimeDim
    EventFact
    CustomerDim
    My BMM is setup as follows:
    TimeDim left outer join EventFact
    CustomerDim inner join EventFact
    If I run a report selecting DAY from TimeDim and a measure1 from EventFact with day range 1/1/2010 - 12/31/2010 .. I get a record for every day and it looks perfect because of the left outer join between TimeDim and CustomerDim.
    But .. if I add in a field from CustomerDim, select TimeDim.DAY, CustomerDim.CUSTNAME, EventFact.MEASURE1, OBIEE only returns records for the days that have EventFact records.
    This is due to the fact that the TimeDim is still outer joined into EventFact but adding in CustomerDim makes OBIEE setup an inner join between those tables which then causes only data to be returned where EventFact data exists.
    There is a way around this in this simple case and that is to define the relationship between CustomerDim and EventFact as an outer join as well. This will give the desired effect (but an outer join between these two tables is not the true relationship) and as I add additional dimensions and add additional logical sources to a single dimension in the BMM it gets complicated and messy.
    Ive also messed with setting the driving table in the relationship, etc.. but it has not given the desired effect.
    Has anyone ever encountered the need to force display all dates within a specfied range with a fact table that may not have an entry for every date?
    Thanks in advance.
    K
    Edited by: user_K on Apr 27, 2010 11:32 AM

    It worked!!!* Even my time drill downs and date based filtering still work!
    That is awesome. Never would have thought of that intuitively.
    Now, just need a little help understanding how it works. When I run my report and check the logs I can see that two queries are issued:
    Query 1: Joins the fact table to all the associated dimensions. I even changed all the relationships to inner joins (which is what they truly are). And calculates the original measure. If I copy and paste this query into sql developer it runs fine but only returns those rows that joined to the time dimension - which is what was happening before. It is correct but I wanted a record for every time dimension record.
    Query 2: Looks like the following:
    select sum(0)
    from timedim
    where date between <dateprompt1> and <dateprompt2>
    group by month *<--* this is the time dimension level specified in Query 1, so it knows to aggregate to the month level as was done in query 1
    Final Question: So what is OBIEE doing ultimately, does it issue these two requests and then perform a full outer join or something to bring them together? I couldn't see anywhere in the log a complete query that I could just run to see a similar result that I was getting in Answers.
    Thanks for all the help .. Id give more points if I could.
    K

  • Please help with restoring different apps and their data between 2 iPads

    I just bought a new iPad Air 2 . I currently have 2 iPads, 1st gen and iPad 2nd, each with its own set of apps and their data. I backed up each older iPad manually as  a full backup. I created a separate library for one of them when doing this. Now I want to transfer iPad 1st gen apps and data to iPad 2nd, so I reset iPad 2nd to factory and then restored from the manual back up of the iPad 1st gen and it seems to work fine. Before that I had backed up iPad 2nd's current data. So now I now I want to transfer the iPad 2nd apps and data to the new iPad Air. I selected the backup by the time stamp that I had backed up iPad 2nd. I didn't know how to rename each iPad to something unique. It restored from backup, but it's all the apps and data from my iPad 1st gen backup, not iPad 2nd.
    I'm utterly confused. Even when I have the separate iTunes library open it shows all the manual backups I performed, so it's not truly a separate library. Do I need to manually install/remove the various apps on the newer iPad?

    If you only have 1 file per quarter, one obvious thing to do would be to edit out the time in between plays, the time-outs, and the like. That is easily done in iMovie.
    Having said that, importing (and exporting) in high definition takes time, and your times do not seem unreasonable.
    Message was edited by: AppleMan1958

  • Moving masters and their versions between libraries?

    Is it possible to move masters and their versions between libraries?

    the best and easiest way (that i have found) is to create a new project and put the masters and versions in there ... use export project to "extract" and then import the project in the different library ...
    this is if you only want to move one or two masters/versions, if you want the whole project disregard creating the new one and moving images ...

  • Adobe forms survey became blank and all data is gone

    We used Adobe forms central to create a survey.  We received approximately 105 responses, at which point I saved a copy of the responses in a pdf form to share with our team.  We later logged in to Adobe forms to see if any other respondents had completed the survey and discovered the entire form was blank.  All text, questions, and options were gone.  The only thing remaining was the image in the header.  While Adobe still reported 105 responses all data was gone.  Any help retrieving the data and returning the survey text would be greatly appreciated!

    Please share the form with me ([email protected]) as a co-author. I will see if I can help.
    Instruction on how to share can be found here : http://forums.adobe.com/docs/DOC-2462
    Gen

  • How Do I Filter a Report Using a Multi Select List Box and Specifying Date Between Begin Date and End Date

    Hope someone can help.  I have tried to find the best way to do this and can't seem to make sense of anything.  I'm using an Access 2013 Database and I have a report that is based on a query.  I've created a Report Criteria Form.  I
    need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date.  I then need my report to return only the records that meet all selected criteria.  It works fine with a ComboBox and 1 selection but can't
    get it to work with a List Box so they can select multiple items.  Any help is greatly appreciated while I still have hair left. 

    The query should return all records.
    Let's say you have the following controls on your report criteria form:
    txtStart: text box, formatted as a date.
    txtEnd: text box, formatted as a date.
    lbxMulti: multi-select list box.
    cmdOpenReport: command button used to open the report.
    The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
    The report to be opened is rptReport.
    The On Click event procedure for the command button could look like this:
    Private Sub cmdOpenReport_Click()
    Dim strWhere As String
    Dim strIn As String
    Dim varItm As Variant
    On Error GoTo ErrHandler
    If Not IsNull(Me.txtStart) Then
    strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
    End If
    If Not IsNull(Me.txtEnd) Then
    strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
    End If
    For Each varItm In Me.lbxMulti.ItemsSelected
    strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
    Next varItm
    If strIn <> "" Then
    ' Remove initial comma
    strIn = Mid(strIn, 2)
    strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
    End If
    If strWhere <> "" Then
    ' Remove initial " AND "
    strWhere = Mid(strWhere, 6)
    End If
    DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
    Exit Sub
    ErrHandler:
    If Err = 2501 Then
    ' Report cancelled - ignore
    Else
    MsgBox Err.Description, vbExclamation
    End If
    End Sub
    If SomeField is a text field instead of a number field, change the line
            strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
    to
            strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Updated as new installation 613 to 616 iphone 3GS, the 613 backup is nolonger listed, and all data gone. Anyway to restore 613 with data and update keeping data?

    I chose new installation instead of update from 613 to 616. The new installation is missing all the data, and app data, notes, etc. The previous backup is nolonger listed, only new one for 616, anyway to restore 613 with data?

    A backup was listed for earlier today, I did a backup before new installation. Once new installation, it did an auto backup of new installation, and only this one is listed.
    This matches documentation, it says cannot restore to earlier version from itunes. Do I have to do a restore factory settings to see previous version backup, and restore this earlier version?

  • Moving Images and Catalog Questions...

    Since I first started using Lighroom, I have kept all images in one catalog on my laptop hard drive. It was time to change that and move all images to my NAS, further backing up a copy of all to another external drive, and keeping some copies of images on my laptop for when I am undocked and want to show my best work.
    Seemed the only way to do this was to use two catalogs, so I created a new one for the images on the NAS.
    After checking that all was good and making a backup of the Laptop catalog, I copied the master folder of all images and sidecars to the NAS. I then opened the new catalog which was empty and imported all from the new location.
    So, now I have two catalogs and both backed up as catalogs and complete image sets so I am good no matter what. Let's call them Laptop and Network. I have not yet deleted anything on the Laptop.
    Network found not only all images, but somehow 21 more than on the Laptop. Cannot figure out how the number of images could be different, but they are. Not really a problem, but a curiousity, no?
    All edits are there. Images look identical to Laptop. Keywords, image titles, folders - all perfect.
    But here are my questions:
    I lost my edit histories. By this I mean if I compare an edited RAW image on Laptop. I can see the original image before I started to edit. This is sometimes very helpful. On the Network catalog, it shows the current image and does not have the original preview. The laptop catalog shows the original and current state.
    And I lost my collections. Not the end of the world, but would be so nice to not have to rebuild these.
    So, is there any way to get these two back? Let's assume, for a moment, that both catalogs are identical (even though there is that 21 image difference). Can I do something with the catalogs or the Previews folder that would bring back the collections and original pre-edit images?
    I thought it worth checking before I start to delete images through Lightroom on the Laptop Catalog and continue to edit on the Network catalog. Anything? Export as catalog and replace the .lrcat and rename it? Copy over the root-pixels.db? Any trick?
    And last, if anyone is reading, a feature request:
    Would be nice to have a preference to select the number of backups to keep. For example, if I could set it to ten, I would never have to worry at all abotu backing up after each session and going to delete old backups no longer needed.
    Thanks for any advice. Posted this on  several boards hoping someone might reply before I start to edit again later today. Apologize if you see this in multiple places.
    ~Bob

    You are actually exactly right.
    I spent the morning deleting all I had done on the NAS drive and exporting as a catalog with negatives to the NAS. It now has everything I wanted there including the history and collections.
    Took a while to get there, but works just fine now and I have two catalogs - one portable and one server based with the .ircat on the laptop for both. Not the most intuitive, but done.
    Thanks.
    ~Bob

Maybe you are looking for