Moving mail to Intel Xserve

I have a G4 DP Xserve G4 that is running 10.4.8, and we have just purchased a new Intel Xserve which is running 10.4.8 also. We are setting up the new xserve for a mail server and it is getting moved to a co-lo rack. I have performed an Archive and restore to move the OD list from the old server to the new. All users and groups imported without a problem, then I setup the mail service on the new mac (didn't start it). I then connected a firewire drive to the old mac server, stopped it's mail service, then i ditto /private/var/imap and /private/var/spool/imap folders to the firewire drive. On the firewire drive i had created 2 folders: imap and spool. Inside of the spool folder i also created a folder called imap. These were the destination of my ditto. I then moved the firewire drive to the new server and ditto'd the files from the firewire to the proper folders on the new server. For a few minutes all of my users accounts are listed in the serveradmin-mail-maintenance-accounts window. They then disappear and i receive the following error in the logs window.
DBERROR: critical database situation
service imap pid 24512 in READY state: terminated abnormally
I can not login to any of my accounts via a mail client (i.e. Entourage) or through webmail.
Any thoughts?
Collyn

I have not tried mailbfr for the backup and restore,
but rather have done it manually. Perhaps there is
something I've overlooked that mailbfr has not. Has
anyone had perfect success migrating from PowerPC to
Intel with the maintaining of flags using any method,
mailbfr or otherwise?
mailbfr copies the configuration files and mailstores. It then runs a permission fix and reconstruct. I suppose this is pretty much what you did manually.
I have seen several migration scenarios (not only mail) having issues when going from PPC to Intel. Not that I have an answer, because data shouldn't be affected by a Processor.

Similar Messages

  • Moving Public from G4 XServe to new Intel XServe and preserve permissions

    We have purchased a new Intel XServe (10.4.8) and need to move the Public folder and Users folder from our old XServe G4 (10.3.9) to the new one, and would like to preserve the permissions.
    Both of these are OD replicas; there is an XServe G5 (10.3.9) which is the OD Master.
    Apple Tech support tells me it is not possible.
    I have tried ditto, tar, scp, and a Finder copy to an external FireWire drive. None of these attempts have successfully preserved the permissions.
    tar cf - * | (cd /target; tar xfp -)
    ditto -rsrc /oldpath /newpath
    I have searched the archives, but not found any answers.

    Thank you for the link - I will try Dan's tar syntax tomorrow (and hope there are no differences with 10.3.9).
    /usr/bin/tar -cvf - xyzzy | /usr/bin/tar -C target -xvf -
    I also like his hint about handling remote files.

  • Migrating ppc xserve to intel xserve - windows users

    I have a PPC xserve that acts as our DNS, OD master, mail and Windows Server.
    I have 30 windows users that access this system.
    We have a new Intel Xserve and I intend migrating from the PPC system and retiring, reassigning the PPC m/c.
    From what I understand the simplest way to achieve this is to set the Intel server up as required with DNS and OD settings from scratch.
    Then bring over the OD archive from the PPC.
    I can then add the (PPC) saved plists for mail etc.
    Move all the required data and set up shares.
    This all seems OK, what I want to know is if anyone has any experience with the windows users once this has been done.
    Do they have to be rejoined to the "windows" domain, will I have to make copies of all their local profiles, in case the profiles get trounced.
    Any experiences would be appreciated, as usual the less work per m/c the better.

    I did a little research on the boards here and it
    seems the method of choice to move a mail server is
    to use the trusty mailbfr. I am curious if anyone has
    used this method to move a ppc mail to an intel
    mail?
    I suppose the core components of the OS are the same
    so my gut tells me this should work fine. Anyone know
    differently?
    Thanks,
    JL
    Yes, worked fine for me.

  • Problem moving Mail from old to new iMac

    I followed instructions about moving Mail--with all mail folders and old emails intact--from my old PowerPC iMac to my new Intel 3.20 MHz iMac. I copied the folder "Mail" inside my user library and the "plist" file from Preferences onto my thumb drive from the old computer, then uploaded these files onto the new one. I was able to easily replace the "plist" file with the onscreen prompt (Do you want to replace?), but the Mail folder went into the Library folder as a duplicate only. So, I tried to delete the original and unused Mail folder, but everytime I sent to the trash and empty the trash, it magically reappears, so that my old emails don't show up when I open the Mail program. I know the files are there--but how do I make my new iMac recognize them and how do I delete the empty Mail folder that was on the new computer originally to avoid confusion? Thanks for any advice you can give.

    You may need to rename the copy to be simply Mail. This is best done having first removed any Mail folder on the new Mac, but this should work as well.
    Ernie

  • Moving Mail, Address Book and Keychains from Old Computer to New Computer

    My issue: Moving mail, address book and keychains from Panther (old machine) to Leopard (new machine). Old machine (500mh G4 power pc) will not connect directly via firewire to new machine (iMac intel). So, I have to move the files manually via a firewire hard drive.
    I am looking for a document that will tell me exactly which files to move. Can someone please help me find this document? Thank you. Dale
    P.S. I have no issues with installing Leopard. I only need to move the mail, address book and keychains from old to new machine. No .mac account is available.

    for address book: go to your old mac, launch ab, and go to file>export and export your contacts as vcards, select all cards before that, then bring that export file to the new mac, and launch ab there, then go to file>import as vcards and you should be set as far as contacts are, but not as far as groups if you have extensive groups. that would be the safe option. the other option is to go to homefolder/library/application support/address book and move that folder to the new mac. the only question i have is... is the database structure and files the same between panther and leopard, which is why i suggest the first option of import/export of vcards.
    for mail, in your old panther go to homefolder/library/mail and move that mail folder to the new mac. make a copy of that folder, then move one copy to the same location in the new mac.
    for keychain, in your old panther go to homefolder/library/keychain, you want to bring the file that is in that folder to your new mac. make a copy of that folder, then move one copy to the same location in the new mac.
    once that is done, you may have to do some more steps with mail, once you launch mail, such as importing mailboxes. let me know if that is the case.
    hope this helps

  • Mail.app is COPYING instead of MOVING mail to folders (using IMAP)

    Hi there,
    I hope I can keep this simple, I'll go by the steps leading to my propblem:
    1.
    I've been using POP3 mail for a long time, mainly with Outlook on PC's and now that I have made the godly switch to Apple I've been using Mail.app for a couple months. I host my domains at GoDaddy.com and they offer decent mail servers including webmail, etc. Since I'm checking mail on multiple platforms (iPhone, iPad, MacBook and webmail) I decided to start using IMAP instead of POP3. GoDaddy set that up form me in seconds and I got IMAP working on Mail.app in no time (yes, I deleted the old POP accounts and started from zero creating new IMAP accounts).
    2.
    I've learned to keep mail filing easy so I have just two folders: "Inbox" and "archive". My inbox is... well... my inbox. If a mail is in my inbox it's because it's either a brand new unread mail or it is read and I'm keeping it there because action needs to be take upon it. Once action has been taken and I want to save the mail for future reference I just archive it.  If I want to retreive mail I just make a search across all folders. Of course I also have the trash folder, sent items, junk, etc.
    3. THE PROBLEM
    As seen on the subject line, Mail.app is COPYING instead of MOVING mail to the IMAP server based folders. So when I click on archive, or manualy drag a mail to the "archive" folder it places a copy there but the email is still visible in the inbox on all my devices. I have tried creating other IMAP folders and giving them different names such as "saved mail" or "old mail" and still I get the same problem. To prove the problem is on the Mail.app side I loged into my webmail and moved messages to the "archive" folder from there, and guess what... it worked. The messages did not show up in the inbox of any of my devices any more.
    PLEASE PLEASE HELP.... I'm talking about three email addresses which receive tons of business related mail every day... I'm flooded in mail.
    THANKS in advance for your help!
    Kinds regards,
    Willem

    Thanks wjosten,
    I had already tried that. I even created a keyboard shortcut to do so. It doesn't work! As soon as I close down Mail.app and start it up again, the messages are back in the inbox.

  • Intel Xserve won't boot from 3rd party drive in ADM

    Right, I've got a Late 2006 Xserve Dual 2.66 with the normal non-RAID SAS/SATA board, which has been running fine for 2 years with a pair of non-Apple Seagate Barracuda ES 250GB drives (Bay 1 & 2), and an original 80GB ADM in Bay 3 as a spare boot disk.
    Bay 1 & 2 are set up using SoftRAID and are partitioned into a boot volume (30GB) and a data volume (200GB), both RAID 1 mirrors. The boot volume is cloned nightly to Bay 3 (single volume, set up using Disk Utility). Data is backed up to a utility machine, so this is arrangement lets me handle any single drive failing.
    This arrangement has worked fine for 2 years, and allows me to remotely boot off Bay 3 and run DiskWarrior or other disk maintenance software on the normal boot drive without having to drive across town with a firewire drive. I originally started with Mac OS X Server 10.4, but I'm now on Mac OS X Server 10.6.4.
    Where things have come unravelled is, I need to upgrade the two 250GBs to something larger. I didn't realise that the Intel Xserve is pretty fussy with ADM sleds and the model of SATA drive they will work with. I didn't have any issues when I set up the Barracuda ES 250GB so wasn't expecting any problems this time.
    I bought a pair of Seagate Constellation ES 500GB drives (well 3 actually, one to keep on the shelf as a spare).
    I installed them in the sleds and inserted them in the Xserve. The green power LEDs came on but the drives weren't recognised in Disk Utility or System Profiler. I then added the jumper to set them to 1.5Gb/s and then they mounted. I went through my normal process of cloning the OS to them from a standard disk image I have of a known working OS install, ran Disk Utility to repair disk & repair permissions, Disk Warrior to check everything else (my standard paranoid procedures). Set the startup disk to the new install and rebooted. No joy, just the flashing question mark folder. Reboot with the option key, and the new volume doesn't appear in the list of available boot options.
    I installed the drives in a firewire enclosure, and it booted without any problems, so it's not a corrupt install, it's something to do with the ADM sleds.
    So to go back to basics, I tried initialising a single drive as a single volume and installed 10.6.4 server fresh from the DVD. Same result, no boot when in installed in ADM sled, boots fine in firewire case.
    Erased drive, changed formatting to APM (rather then GPT), cloned OS, etc. Won't boot when in ADM sled, boots fine from firewire case. So that screws the theory that drives have to be GPT to boot on Intel hardware.
    So I ordered a set of WD RE3 500GB drives (x 3) and repeated this whole process. Same deal, boots fine in firewire, won't boot when installed in ADM. GPT vs APM doesn't make any difference.
    Try #3. Ordered desktop variants rather than server class drives. So armed with a pair of WD Caviar Black 500GB. Same deal, boot fine from firewire, will not boot when installed in ADM. Also required jumpers for 1.5GB/s and also the undocumented pins 7&8 (apparently this might be related to the new Advanced Format they are using)
    Try #4
    A pair of Seagate Barracuda 7200.12 500GB. This is where it gets tricky. One of the Barracuda will boot the Xserve when installed in an ADM, and one will not. So 2 Barracuda 7200.12, both same model number (ST3500418AS), both same firmware (CC38), yet they behave differently.
    Try #5
    Barracuda ES.2 250GB (x 3). Won't boot in ADM, will boot firewire.
    Try #6
    WD Caviar SE16 250GB (WD2500KS)
    Boots in ADM (Yay!!) and firewire
    Try #7
    WD Caviar SE16 500GB x 2 (WD5000AAKS)
    Boots in ADM and firewire
    I've managed to get access to G5 Xserve (2.3DP) so I've repeated all this testing on it as well. The G5 doesn't care about the model of drive and boots from any of them using a 10.5.6 install with APM formatted drives.
    I've tried all these drives in 4 different models of ADM sled. One thing I have determined is that the model of sled determines if you need to use the 1.5GB/s jumper. I have 2 sleds from G5's, they require the jumper, a 80GB Intel ADM sled with separate data and power plugs requires the jumper, and an Intel 160GB ADM sled with the ribbon cable and combined data/power plug doesn't require the 1.5GB/s jumper. APM vs GPT formatting again makes no difference.
    So on the Intel machine, the drives work in the sleds, appear as normal drives on desktop or in Disk Utility when logged in, and also appear as normal drives when connected via SSH if Auto Login is disabled. So to me they appear to be working drives.
    It appears to me that something changed at a low level between the Barracuda ES and ES.2 generations of drives (for WD drives as well since the Caviar SE16 that boots is a similar age to the Barracuda ES)
    So then why won't it boot from them? Is there some magic dance I've missed?
    And how come one of the 7200.12 will boot, while another identical model won't?
    Any tips or suggestions greatly appreciated.

    I don't have an answer for you, but you deserve thanks for all the useful hardware information you posted from your trial-and-error testing.
    My impression has that the XServes need specific kinds of firmware and hardware monitors on their drives in order for everything to function smoothly. My own efforts swapping drives in ADMs has produced "mixed results" to put it mildly. It would be so much easier if we knew what kinds of drives worked properly in what kinds of ADMs and on which Macs/XServes.

  • Intel Xserve will NOT boot from hard disk drive

    I have two Intel Xserves 2.0 QC machines
    I have tried to re-install version 10.4.11 OS (don't ask) onto a Hard disk drive that is in a Disk drive caddy and inserted in the machine.
    When booting from The installation DVD media
    The disk is seen by the "Disk Utility" (the disk is partitioned as GUID boot) and the installation proceeds to the disk.
    Once the first pass of the installation is complete and the system reboots, the system shows the folder and ? mark.
    If I boot and hold "ALT" key to view all avaialble boot options the Hard Disk Drive does NOT appear as valid boot disk.
    It does show, the still inserted Installation DVD.
    I CAN boot from an external firewire drive and the Hard disk drive is visible to the OS once logged in.
    I have tried different caddy postions (left, middle and right)
    I have tried bona fide Apple supplied Disk drives
    I have tried various different caddies
    I have tried installing Operating System 10.5.*  and  10.6.8 server
    I have run SMC reset and system reset
    But still I cannot boot off from any Hard Disk Drive inserted in a caddy at the front of the system.
    Has anyone seen this behaviour?
    Is it fixable?
    Do I have replace something like the Hard Disk Drive back plane circuit board? Or even the main logic board?
    I have now run out of ideas and cannot find any help in discussions or just googling.
    ANY help would be very appreciated
    Regards
    Tony

    Antonio Hi !
    QC = Quad core  or  QX as it is written on the "pull out" serial number tab at rear of system
    I have 3 late 2006 Intel xserves
    On my intial posting I declared 2 were 2.0 machines - when I was trying to be concise
    2 of the macines are 2.66 systems and 1 is 2.0 system - all are QX machines
    the 2.0 and 1 of the 2.66 will NOT boot from the ADM and disk inside the system - whereas the other 2.66 system will.
    I have many different Caddies and these have different product/model number labels
    603-9965
    603-9545
    603-9796
    these are marked "intel SATA"
    The 80Gb was only one of the drives tested - I have used Seagate 400Gb 750Gb and 1Tb  -  all of which have been used in systems at one time or another
    and as I said the drives ARE visible once the operating system (either installation DVD or external firewire are booted from) - they are just NOT visible when the system is searching for boot media.
    Thanks for the guide - I will look through that and continue to try and find an answer

  • Intel Xserve and Apple Xserve Diagnostics

    Has anyone figured out how to run the Apple Xserve Diagnostics (AXD) that is included with the new servers? The documentation is very poor to say the least, in once instance the user guide says to see the user guide for more information. Another pdf says to refer to www.apple.com/server/documentation for information on AXD yet this site has no mention of the intel Xserve yet. I've searched the service manual and got much of the same run around.
    I've managed to install the AXD on another Mac OS X server and activated the netboot image but it does not appear to run in the same manor as the Apple Remote Diagnostics for the Xserve G5s. Any help is appreciated!
      Mac OS X (10.4.8)  

    David
    Unless someone knows different the only place I know of is here:
    https://gsx.apple.com/cgi-bin/WebObjects/GSXAppServer.woa
    You need an Apple ID. To access the Service Source you'll probably need a Tech ID. Alternatively you could apply for the CD from Apple directly? Or from an Apple Authorized Repair Specialist. You could take the XServe directly to either of those locations and see if they can run the Diagnostic tools for you?
    Tony

  • I am having trouble moving mail and and firefox profiles to Macbook from Powerbook

    I just inherited a cool late 2008 aluminum Macbook with Lion.  But I can't seem to get my Mail to move over or my Firefox preferences.  I tried the steps for moving mail:  copying and pasting the keychain, mail and mail preferences files.  Nothing happened. I've started now to set up the old way (ie setting up the accounts as if they were new) but know this is not a good idea.
    Trying to get something to work, I tried to move over my Firefox profile by copying the file into the same place on the new computer as old. Nothing.
    In both Mail and Firefox, I can see the new files, but they aren't being read. 
    Stupidly, I did not copy the old files before I pasted the new.
    Should I just start over and reload Lion??
    I'm so frustrated!
    Thanks for any help.
    Anne

    I also see that it seems to be moving all of the mail over from my gmail account.  I didn't mean to move everything out of gmail to this computer!  Now what do I do??

  • Intel Xserve + Xserve RAID + SCSI

    I have a requirement for an Intel Xserve system that I can connect an Xserve RAID and SCSI tape autoloader to. It seems that Apple won't let me configure a system with a SCSI card and a fibre channel card in it at the same time, and repeated phone calls to them have yielded precisely nothing (very disappointed with the lack of professionalism and knowledge displayed by the Apple sales and tech staff on this matter).
    Can I have such a configuration? It seems that I can only fit a fibre channel PCIe card in expansion slot 1 as it is too long to fit in slot 2 which is limited to 6" long cards. I've seen that Atto do PCIe SCSI cards but there is no mention on their site about whether they will fit/work in slot 2 of an Xserve and emails to them have gone unanswered.
    If anyone has any info on this, or could point me in the direction of the info, I would be very grateful. Or if what I want isn't possible, ideas on how to back up a 7TB array without direct attached tape storage would also be appreciated.

    Actually, having just looked at the store, Apple
    don't seem to offer any PCIe SCSI cards, just a PCI-X
    one with a PCI-X riser. Would this configuration stop
    me using a PCIe card in slot 2?
    Avoid the Apple BTO SCSI card like the plague. It's junk.
    It's really a rebranded LSI Logic 22320. Ours never worked
    right in our Xserve G5; we replaced it with an ATTO UL4D and
    all of our problems went away. The right card for the intel
    Xserve is the ATTO UL5D or UL5D low profile (both are PCIe).
    Link is here:
    http://www.attotech.com/hostadapter.html
    The Apple-rebranded LSI Logic 22320 sits on a shelf gathering
    dust.
    Russ
    Xserve G5 2.0 GHz 2 GB RAM   Mac OS X (10.4.8)   Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u

  • Intel Xserves Crash only on weekends

    We have 10 Intel XServes that we received in early December. For some reason anywhere between 2-6 of the 10 crash and become unresponsive, only on the weekends, usually Saturdays. Very odd.
    I've been checking them every weekend since we've purchased them and it has been consistent for the last 5+ weeks. They crash only on weekends.
    I found this in the crashreporter log on one of the servers, they all have similar logs:
    Sat Dec 23 14:28:50 2006 crashdump[120]: crashdump invoked as panicdump
    Sun Dec 24 02:11:08 2006 crashdump[1814]: crashdump started
    2006-12-24 02:11:09.210 crashdump[1814] threadreadstack: stack appears to be in inconsistent state to trace. Truncating stack.
    2006-12-24 02:11:09.210 crashdump[1814] threadreadstack: frame pointer is zero, continuing.
    Sun Dec 24 02:11:11 2006 crashreporterd[118]: mach_msg() reply failed: (ipc/send) invalid destination port
    Sun Dec 24 02:11:11 2006 crashdump[1814]: Started writing crash report to: /Library/Logs/CrashReporter/drone.crash.log
    Sun Dec 24 02:11:12 2006 crashdump[1814]: Finished writing crash report to: /Library/Logs/CrashReporter/drone.crash.log
    Sat Jan 6 08:26:57 2007 crashdump[113]: crashdump invoked as panicdump
    Sat Jan 13 10:01:33 2007 crashdump[120]: crashdump invoked as panicdump
    Does anyone have any ideas? What other logs should I be checking?
    Quad G5s, Intel XServes   Mac OS X (10.4.8)   Xsans, XServe RAIDs, oh my...

    The "drone" is our encoding software. That may be the cause, but i'm not entirely sure of course.
    Here is the panic log:
    Sat Dec 23 14:28:50 2006
    panic(cpu 3 caller 0x00141505): zalloc: "kalloc.256" (1915824 elements) retry fail 3
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x4bc93cf8 : 0x128d08 (0x3c9a74 0x4bc93d1c 0x131de5 0x0)
    0x4bc93d38 : 0x141505 (0x3ca780 0x3c9d1c 0x1d3bb0 0x3)
    0x4bc93d98 : 0x12d97d (0x1945b70 0x1 0x4bc93dc8 0x12db75)
    0x4bc93dc8 : 0x12e192 (0xa8 0x1 0x4bc93e18 0x140259)
    0x4bc93df8 : 0x63421142 (0xa8 0xa9b2680 0x4bc93e58 0x1a16ce)
    0x4bc93e28 : 0x6341c64d (0x63476c68 0x0 0x558c161c 0x20)
    0x4bc93e98 : 0x6343a294 (0xa8 0x0 0x2 0x0)
    0x4bc93ee8 : 0x6343ad67 (0xaaef800 0xac94000 0x18 0x634211dd)
    0x4bc93f78 : 0x6341fa8e (0xaaef800 0xaaef814 0xaceb8c4 0x0)
    0x4bc93fc8 : 0x19a7ac (0xaceb8b0 0x0 0x19d0b5 0xa3d6c64) Backtrace terminated-invalid frame pointer 0x0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.filesystems.acfs(2.7.1)@0x633c0000
    dependency: com.apple.iokit.IOStorageFamily(1.5.1)@0x516000
    Kernel version:
    Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386
    Sat Jan 6 08:26:57 2007
    panic(cpu 2 caller 0x00141505): zalloc: "kalloc.256" (1829872 elements) retry fail 3
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x4bd0bcf8 : 0x128d08 (0x3c9a74 0x4bd0bd1c 0x131de5 0x0)
    0x4bd0bd38 : 0x141505 (0x3ca780 0x3c9d1c 0x1bebf0 0x3)
    0x4bd0bd98 : 0x12d97d (0x1945b70 0x1 0x4bd0bdc8 0x12db75)
    0x4bd0bdc8 : 0x12e192 (0xa8 0x1 0x4bd0be18 0x140259)
    0x4bd0bdf8 : 0x63423142 (0xa8 0xad8f280 0x4bd0be58 0x1a16ce)
    0x4bd0be28 : 0x6341e64d (0x63478c68 0x0 0x558c161c 0x20)
    0x4bd0be98 : 0x6343c294 (0xa8 0x0 0x2 0x0)
    0x4bd0bee8 : 0x6343cd67 (0xaabec00 0xacab900 0x18 0x634231dd)
    0x4bd0bf78 : 0x63421a8e (0xaabec00 0xaabec14 0xac450c4 0x0)
    0x4bd0bfc8 : 0x19a7ac (0xac450b0 0x0 0x19d0b5 0xa3d6c64) Backtrace terminated-invalid frame pointer 0x0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.filesystems.acfs(2.7.1)@0x633c2000
    dependency: com.apple.iokit.IOStorageFamily(1.5.1)@0x516000
    Kernel version:
    Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386
    Sat Jan 13 10:01:33 2007
    panic(cpu 1 caller 0x00141505): zalloc: "kalloc.256" (1823792 elements) retry fail 3
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x4bd43cf8 : 0x128d08 (0x3c9a74 0x4bd43d1c 0x131de5 0x0)
    0x4bd43d38 : 0x141505 (0x3ca780 0x3c9d1c 0x1bd430 0x3)
    0x4bd43d98 : 0x12d97d (0x1945b70 0x1 0x4bd43dc8 0x12db75)
    0x4bd43dc8 : 0x12e192 (0xa8 0x1 0x4bd43e18 0x140259)
    0x4bd43df8 : 0x799d6142 (0xa8 0xa423280 0x4bd43e58 0x1a16ce)
    0x4bd43e28 : 0x799d164d (0x79a2bc68 0x0 0x558c161c 0x20)
    0x4bd43e98 : 0x799ef294 (0xa8 0x0 0x2 0x0)
    0x4bd43ee8 : 0x799efd67 (0xafc3c00 0xae4e200 0x18 0x799d61dd)
    0x4bd43f78 : 0x799d4a8e (0xafc3c00 0xafc3c14 0xad2d8c4 0x0)
    0x4bd43fc8 : 0x19a7ac (0xad2d8b0 0x0 0x19d0b5 0xa3d1e68) Backtrace terminated-invalid frame pointer 0x0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.filesystems.acfs(2.7.1)@0x79975000
    dependency: com.apple.iokit.IOStorageFamily(1.5.1)@0x516000
    Kernel version:
    Darwin Kernel Version 8.8.4: Sun Oct 29 15:26:54 PST 2006; root:xnu-792.16.4.obj~1/RELEASE_I386
    And here is the asl.log. I only included a few of these entries, as there are a lot there a quite a number of the same identical entries.
    [Time 2007.01.16 16:31:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 16:31:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 17:01:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 17:01:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 17:31:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 17:31:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 18:01:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 18:01:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 18:31:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 18:31:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 19:01:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 19:01:36 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 19:31:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 19:31:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 20:01:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 20:01:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 20:31:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 20:31:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 21:01:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 21:01:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 21:31:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 21:31:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 22:01:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 22:01:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 22:11:14 UTC] [Facility daemon] [Sender ntpd] [PID 7931] [Message time reset +0.137353 s] [Level 5] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 22:31:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 22:31:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 23:01:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no name available via DNS for 192.168.60.69] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    [Time 2007.01.16 23:01:37 UTC] [Facility user] [Sender servermgrd] [PID -1] [Message servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair] [Level 3] [UID -2] [GID -2] [Host Encoder-9]
    Quad G5s, Intel XServes Mac OS X (10.4.8) Xsans, XServe RAIDs, oh my...

  • Intel Xserve power problems

    As of recently, I just started noticing a issue with powering on a new intel xserve. If the machine is running, using LOM and shut down works beautifully. After I shut it down, using LOM and the button works beautifully. If i attempt to turn it back on a few min later, it works fine.
    If I leave it off for a day or so, even though the lights are on on the front of hte machine, LOM can see the server, but "power on" doesnt do anything, and hitting the front power button doesn't do anything. I have to unplug it from the UPS and replug it in for it to turn on.

    Hi Forum folks.
    I've had a 6-month (ish) Xserve doing the same thing. Every day, at least once a day, I'd get an email / SMS, saying the power supply or blower was having a momentary problem.
    After shutting down the server, I pulled out the Power Supply Units, and checked them out.
    Turns out, one of them had a slightly damaged heat sink (damage visible without opening the PSU). So, I swapped it for a spare I'd purchased. And then got the damaged unit (damaged internally at factory by the look of it) replaced by my Apple Reseller.
    Note: the newer Intel XServes (early 2008) have a 750w PSU, compared to a 650w PSU, in the 2006 Intel XServes. The older PSUs fit in the newer Xserves, but they DO NOT function. (You'll get an error in Server monitor).
    Hope that helps,
    Cheers,
    Derek

  • The swoosh sound my iphone5 made when I moved mail to trash has stopped.  How do I get it back?

    The swoosh sound my iphone5 made when I moved mail to trash has stopped.  How do I get it back?

    First quit and restart Mail and see if the sound returns. BTW it is selected in Settings > Sounds correct?
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
    If that doesn't work try a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Should cancelled mailbox moves result in any moved mail data removed from target server?

    I was moving mailboxes from 1 DB to another. 3 out of 120 were left running for 12 hours; they were the biggest ones and it was very slow to process the items. There were also reports of slowness on the server so I had no choice but to cancel the moves.
    My question is should cancelled mailbox moves result in any moved mail data being removed from the target database? It doesn't appear that my disk as increased in space again so I'm wondering if it's there as whitespace maybe? There is an event logged to say
    the mailbox has been deleted from the target.
    Would appreciate if someone can clear this up and possibly explain exactly what occurs during this type of scenario.
    Thanks.

    Hi,
    Thank you for your kindly remind.
    In Exchange 2000, 2003 and 2007 mailboxes become unavailable during movement, when a mailbox move takes place, the mailbox isn't actually moved, it's just copied to the destination location. Once that copy has finished, AD is updated to point to the new location
    and the old mailbox is deleted from the source EDB file.
    The most different between Exchange 2010 and legacy version in move mailbox is that allows end-users to be online in their email accounts. On completing the move users just needs to reopen their Outlook clients.
    Mailbox Move Requests are a new feature set of Exchange 2010 and requires running a series of Cmdlets to perform asynchronous online mailbox moves with the help of a service agent called Mailbox Replication Service (MRS). MRS is available on all Exchange 2010
    Client Access Servers.
    Best Regards,
    Allen Wang

Maybe you are looking for

  • IMovie wont recognise my HD Camcorder any more.....

    Trying to import video from Camcorder. Click File>New Event, and iMovie quits and the below happens. When I connect the camcorder, it automatically opens iPhoto and tries to import into there. Process: iMovie [204] Path: /Applications/iMovie.app/Cont

  • Orientation of Still Images Wrong in Premiere?

    As many users of various Adobe programs, have had issues with Still Images, that were shot in Portrait Mode, but when rotated in PrE's/PSE's, Organizer, or Adobe Bridge, find that the Images do not Import in the correct orientation, I wanted to addre

  • MacBook Pro 15" won't see DVI display behind KVM switch

    I have a Gefen single-link DVI switch connected to a 24-inch Dell display. My MacBook Pro will detect the display if I connect it directly to the MacBook Pro's Mini DisplayPort to DVI adapter, but if the KVM switch comes in Detect Displays finds noth

  • PO amount against PR amount

    hiii... pls tell me report t.code or table name for get PO number ,PO amount agains that PR wIth amount n quantity. regards Rekha

  • Layer malfunction

    I copied the original background layer so that of course the original remains the original, but I must have clicked on something that causes every change I make on the copied layer to automatically make the same changes to the background layer. I tri