MP3 attachment causes mail to minimize

When I attach a photo to an e-mail, I click send and the bar at the bottom shows the progress in loading and sending the mail. If, however, the attachment is an mp3 file, the whole mail window disappears and goes to the dock where I need to click and bring it back. The mail is sent as it should be. It is just that the window minimizes to the dock as it is loading and getting ready to send. Any way to keep the mail window open while this is happening?

Thanks for the responses Laura & Massimo. Firstly, the Client is 14.0.1 Build 117118. The error message pops up as a box over the client saying the message is undeliverable (sorry, I don't have the exact wording). Also, it is not consistent, i.e. it does not happen every time. Attachments are usually pdf's, sometimes word docs. Because it is inconsistent I have not been able to duplicate it. The files are being dropped in the attachment area. Sometimes the email that has created the error message does get delivered in spite of the fact it said it was undeliverable but the attachment is garbage. The user usually just tries again and it works or they drag the file to the desktop and then to the email and that works.
Rod

Similar Messages

Cannot drag MP3 attachment out of mail.

Hey All,
Since somewhere in Mavericks, now in Yosemite, I lost the ability to drag an MP3 attachment out of mail. I remember the time I was able to do so. Don't know where or what or why that changed. I can drag it in though, but not out. With things like jpeg, or pdf, I have no problems. I checked all prevs, of Mail app, and Finder.
What Am I doing wrong?
Thanks,
Barracuda

i do want to leave 'automatic sync' enabled because, well, i want my phone to automatically sync when i plug it in. i also want drag-drop to work once it's done that, but that's why i posted...
the 2nd drag-drop: "the same drag-drop that worked not two minutes ago" refers to "[[dragging]] .MP3 files from elsewhere on my computer to my iTunes music library". Nothing to do with the phone. In fact the problem still occurs if I disconnect the phone after iTunes has launched.
i'd be interested to hear if anyone else sees this behavior:
1) iTunes launched by Explorer => drag-drop enabled
2) iTunes launched by iTunesHelper (plug in iPhone) => drag-drop disabled
where 'launched' means actually launched, and not just restored from the system tray.
Message was edited by: spongman

How do I save an mp3 attachment in my email on my ipad air

How do I save an mp3 attachment in my email on my ipad air to my music files?

From Mail, you cannot. You must sync music to your Music app through iTunes. Though there are other options on what you can do with it if other mp3 registered apps are installed on your iPad.

Fetch data from table and generate attachment than mail it.

Hello Experts,
From couple of day I am searching on Google for a better database procedure that will help me to get data from tables and generate attachment and mail it but i fail.
My Scenario is:
I have a query that will fetch almost 5000 records from database tables. Each record has almost 75 characters
select a.location_code,
               a.item_code,
               b.description item_desc,
               to_char(a.manufact_date,'ddMonyy')mfg,
               to_char((a.manufact_date + nvl(b.expiry_period,0)),'ddMonyy')expr,
               to_char((a.manufact_date + nvl(b.qurantine_period,0)),'ddMonyy')qrtn,
               round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) days_elapsed,
               a.closing_balance_posted quantity
          from wms_stock_current_balance_v a, wms_item_setup_mast b
         where a.closing_balance > 0
           and a.item_code = b.item_code
           and a.loc_type in ('RACKING','PICKING','QUICKA','BUNDLED')
           and nvl(b.qurantine_period,0) > 0
           and round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) <= 0
      order by a.item_code, a.location_code;
Sample data of above query is
LOCATION_CODE
ITEM_CODE
ITEM_DESC
MFG
Expiry
Quarantine
Days Elapse
Quantity
13DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
14DL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
134
14DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
14DR2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
20
14LL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17ER2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17GL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17SL0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
64
18QL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
19AR5
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
160
19DL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
19JR0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
60
19TL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
20GR2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
40
36FL3
000000000000000F0487
CLEAR COOL BLACK 05ML
18-Feb-10
29-Mar-14
2-Jun-13
-124
65
19UR0
000000000000000F0591
COMFORT WHITE 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
1
12SL1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
12SR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
14OR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
8
36EL4
000000000000000F0594
CLEAR HF DECRASE 5M*360
14-Feb-10
14-Feb-11
12-Oct-10
-1088
14
13VL1
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
160
14ER0
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
105
Database Info
Oracle 10g
Version 10.2.0.1.0

Look at the sample code for generating a CSV file that I've just posted in response to a similar question:
Re: How to execute a proc and spool files in a database job
And the use the search button in this forum to find sample code for sending a CLOB as a plain/text e-mail attachment using UTL_SMTP.

Links to web page in any mail message will cause Mail app to hang, and won't open Safari.

Repeatable problem on iPhone or iPad.
Any link to a web page will cause Mail to lock up and become unresponsive, and won't open the web page in Safari.
The only way out of this is to back out to the home screen, double-click on the home button, then select the Mail app icon, holding it until I can "close" it. I can then relaunch Mail and look at any message I want just like normal. But if select any link, whether a text link or a picture in an email, the whole thing happens again.
Occurs on both my iPhone 5 and my iPad both running iOS 6.0.1.
Any suggestions that will allow me to go directly from a mail msg to a linked web page embedded within?

You ran a defective third-party "utility" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Smart Forms - Attaching HTML file as an attachment in Mail

Hai,
I have following requirements. I have to send the Payment Advice document output as a HTML format to the vendors.
I am able to get the smartforms output as html file. The output of smartforms i am capturing
   call function '/1BCDWB/SF00000170'
      exporting
        control_parameters = w_control_parameters
        output_options     = w_output_options
        user_settings      = 'X'
        w_t001             = w_t001
        w_reguh            = w_reguh
        w_regud            = w_regud
        w_e1idrs1          = w_e1idrs1
      importing
        job_output_info    = w_job_output_info
      tables
        t_item             = t_item
      exceptions
        formatting_error   = 1
        internal_error     = 2
        send_error         = 3
        user_canceled      = 4
        others             = 5.
    w_xmloutput = w_job_output_info-xmloutput.
*-SAP Smart Forms: Result of XSF Transformation
    w_htmldata = w_xmloutput-trfresult-content[].
Currently the w_htmldata informations are stored in the form of RAW 1024 characters.
Using the below mentioned FM the attachment information i am passing through
       contents_txt               = it_message
parameters. The contents_txt support only 255 characters. But the smartforms returns RAW 1024 characters. When the HTML attachment is not showning the content properly and the data displays is misaligned. Kindly give me the suggestion how to overcome this issue !
call function 'SO_DOCUMENT_SEND_API1'
      exporting
        document_data              = w_doc_data
        put_in_outbox              = 'X'
        sender_address             = ''
        sender_address_type        = ''
        commit_work                = 'X'
      importing
        sent_to_all                = w_sent_all
      tables
        packing_list               = t_packing_list
        contents_bin               = t_attachment
        contents_txt               = it_message
        receivers                  = t_receivers
      exceptions
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        others                     = 8.

Have you upgraded to Yosemite? Then you could send the attachment using Mail Drop.
You can use Mail Drop to send files that exceed the maximum size allowed by the provider of your email account. Mail Drop uploads the large attachments to iCloud, where they’re encrypted and stored for up to 30 days.
If you have an iCloud account and you’re signed in to iCloud when you click Send, Mail automatically sends the attachments using Mail Drop. Mail Drop attachments don’t count against your iCloud storage.
If you don’t have an iCloud account, or if you’re not signed in, Mail asks you whether to use Mail Drop (select “Don’t ask again for this account” to always use Mail Drop).
If a recipient uses Mail in OS X Yosemite, the attachments are automatically downloaded and included in your message just like any other attachment. For other recipients, your message includes links for downloading the attachments and their expiration date.
You can turn Mail Drop on or off for an account. Choose Mail > Preferences, click Accounts, select your account, click Advanced, then select or deselect “Send large attachments with Mail Drop.”

How do I send a large (23mb ) PDF file as an attachment in mail?

How do I send a PDF mail attachment in mail that is greater than the crazy limit of 23MB? Thanks for your help!

Have you upgraded to Yosemite? Then you could send the attachment using Mail Drop.
You can use Mail Drop to send files that exceed the maximum size allowed by the provider of your email account. Mail Drop uploads the large attachments to iCloud, where they’re encrypted and stored for up to 30 days.
If you have an iCloud account and you’re signed in to iCloud when you click Send, Mail automatically sends the attachments using Mail Drop. Mail Drop attachments don’t count against your iCloud storage.
If you don’t have an iCloud account, or if you’re not signed in, Mail asks you whether to use Mail Drop (select “Don’t ask again for this account” to always use Mail Drop).
If a recipient uses Mail in OS X Yosemite, the attachments are automatically downloaded and included in your message just like any other attachment. For other recipients, your message includes links for downloading the attachments and their expiration date.
You can turn Mail Drop on or off for an account. Choose Mail > Preferences, click Accounts, select your account, click Advanced, then select or deselect “Send large attachments with Mail Drop.”

Problem in Sending .txt as an attachment to mail

Dear Experts,
I am working on a file to mail scenario. I have searched a lot in sdn, but could not locate the exact answer for the same.
I am using file adapter to pick up a txt file from a location and supposed to send this as an attachment to mail(in box).
My scenario is ready, have configured the IR and ID. there are only 5 fields at the sender side, have done one to one mapping at the receiver side.
question is
1) Do I have to use content conversion at the sender side in order to read the file in XI or....
2) Can i send the payload of the message as an attachment? Do i have to configure anything else for the same for eg
3) where i have to configure my sender and receiver, has to be in mail adapter or in xml payload?
Kindly provide your valuable suggestions or idea to proceed , as i am confused how to proceed wz the same.
Thanks
Virendra

Hi,
1) Do I have to use content conversion at the sender side in order to read the file in XI or....
Since ur source is a .txt file... to convert it to a xml format u need to use the FCC in file adapter.
2) Can i send the payload of the message as an attachment? Do i have to configure anything else for the same for eg
You can send the payload of a message as a attachment.
I hope u dont want to send the XML structure as a attachment... In receiver...first u have to convert the XML to a .txt file and then
u need to send this .txt as a attachment..
If this is ur requirement u can do it by using the inbuilt EJB's and a Mail adapter in receiver.
The inbuilt bean is MessageTransformationBean... which can convert a XML structure a Text file.
and then u have to pass it to Mail adapter... Please keep in mind the sequence of processing.
If clarification needed u can put a post again
3) where i have to configure my sender and receiver, has to be in mail adapter or in xml payload?
U need to configure both sender and receiver. Sender is a file adapter and receiver is a Mail adapter.
Decide first u want to use mail package or not..
For ur scenario u can do both ways using Payload or XIALL..
Babu

Is it possible to send xls attach in mail in background ?

is it possible to send xls attach in mail in background ?
i build/copy program to send attach file in xls format ,
its work fine in foreground but do nothing in background ,
What can be the reason?
the section of the sending :
DATA: LD_ERROR    TYPE SY-SUBRC,
        LD_RECIEVER TYPE SY-SUBRC,
        LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
        LD_EMAIL LIKE SOMLRECI1-RECEIVER,
        LD_FORMAT TYPE SO_OBJ_TP ,
        LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
        LD_ATTFILENAME TYPE SO_OBJ_DES ,
        LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
        LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
        LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL   = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT              = P_FORMAT.
LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
LD_ATTFILENAME         = P_FILENAME.
LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
     ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM   = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE   = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME   = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE   = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = W_DOC_DATA
      PUT_IN_OUTBOX              = 'X'
      SENDER_ADDRESS             = LD_SENDER_ADDRESS
      SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
      COMMIT_WORK                = 'X'
    IMPORTING
      SENT_TO_ALL                = W_SENT_ALL
    TABLES
      PACKING_LIST               = T_PACKING_LIST
      CONTENTS_BIN               = T_ATTACHMENT
      CONTENTS_TXT               = IT_MESSAGE
      RECEIVERS                  = T_RECEIVERS
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
    LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.

Try this example, not sure where I got this, but it works.
report zmail_excel.
parameters: p_email   type somlreci1-receiver
                               default '[email protected]'.
data: begin of it001 occurs 0,
      bukrs type t001-bukrs,
      butxt type t001-butxt,
      end of it001.
data:   imessage type standard table of solisti1 with header line,
        iattach type standard table of solisti1 with header line,
        ipacking_list like sopcklsti1 occurs 0 with header line,
        ireceivers like somlreci1 occurs 0 with header line,
        iattachment like solisti1 occurs 0 with header line.
start-of-selection.
select bukrs butxt into table it001 from t001.
*   Populate table with detaisl to be entered into .xls file
perform build_xls_data .
* Populate message body text
clear imessage.   refresh imessage.
imessage = 'Please find attached excel file'.
append imessage.
* Send file by email as .xls speadsheet
perform send_email_with_xls tables imessage
                                      iattach
                                using p_email
                                      'Example Excel Attachment'
                                      'XLS'
                                      'TestFileName'
                                      'CompanyCodes'.
*      Form BUILD_XLS_DATA
form build_xls_data .
constants: con_cret type x value '0D', "OK for non Unicode
             con_tab type x value '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
*    con_cret type c value cl_abap_char_utilities=>CR_LF.
concatenate 'BUKRS' 'BUTXT'
         into iattach separated by con_tab.
concatenate con_cret iattach into iattach.
append iattach.
loop at it001.
    concatenate it001-bukrs it001-butxt
           into iattach separated by con_tab.
    concatenate con_cret iattach into iattach.
    append iattach.
endloop.
endform.
*      Form SEND_EMAIL_WITH_XLS
form send_email_with_xls tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription.
data: xdocdata like sodocchgi1,
        xcnt type i.
* Fill the document data.
xdocdata-doc_size = 1.
* Populate the subject/generic message attributes
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle .
* Fill the document data and get size of attachment
clear xdocdata.
read table iattach index xcnt.
xdocdata-doc_size =
     ( xcnt - 1 ) * 255 + strlen( iattach ).
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name   = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle.
clear iattachment. refresh iattachment.
iattachment[] = pit_attach[].
* Describe the body of the message
clear ipacking_list. refresh ipacking_list.
ipacking_list-transf_bin = space.
ipacking_list-head_start = 1.
ipacking_list-head_num = 0.
ipacking_list-body_start = 1.
describe table imessage lines ipacking_list-body_num.
ipacking_list-doc_type = 'RAW'.
append ipacking_list.
* Create attachment notification
ipacking_list-transf_bin = 'X'.
ipacking_list-head_start = 1.
ipacking_list-head_num   = 1.
ipacking_list-body_start = 1.
describe table iattachment lines ipacking_list-body_num.
ipacking_list-doc_type   = p_format.
ipacking_list-obj_descr = p_attdescription.
ipacking_list-obj_name   = p_filename.
ipacking_list-doc_size   = ipacking_list-body_num * 255.
append ipacking_list.
* Add the recipients email address
clear ireceivers. refresh ireceivers.
ireceivers-receiver = p_email.
ireceivers-rec_type = 'U'.
ireceivers-com_type = 'INT'.
ireceivers-notif_del = 'X'.
ireceivers-notif_ndel = 'X'.
append ireceivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = xdocdata
            put_in_outbox              = 'X'
            commit_work                = 'X'
       tables
            packing_list               = ipacking_list
            contents_bin               = iattachment
            contents_txt               = imessage
            receivers                  = ireceivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
endform.
Regards,
Rich Heilman

When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?

When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?

gonsa47 wrote:
When I open it in pages or word the correct company logo appears.
Does the mail app display whatever is in the document without the ability to differentiate between hidden or non hidden images?
The mail app will not display fillable form fields in PDF files that can be seen in real PDF apps. I say real PDF apps because the form fields in PDF apps will not appear in the iBooks app either. IMO, iBooks is not a real PDF app.
So, I would say that the mail app cannot differentiate between hidden and non hidden items

File attachement in mail adapter

Hi ,
I need to send users an error report which I have captured in the form of a file. Is it possible to attach this file as an attachement via mail adapter. I have been reading that the payload can be sent as attachment by specifying the interface namespace and interface name. But my requirement is to trigger the mail once the file has been completely written and not for every message. The reason being I could have 3000 records in the file and I dont want to send 3000 MAILS out but just 1 mail for the entire 3000 records...
Thanks,
Teresa

Hi Teresa,
I hope, I understand you right.
When you use the file-adapter for sending the file, you can without mapping send this file out to a mail receiver as attachment, there is nothing special to do.
Regards
Stefan

Need to sent alv output as html or as pdf attachment in mail

+Hello
I want to send an ALV output as attachement in html or as pdf format. how to do that? line size is greater than 600(nearly 40 fields).
+please help me in this query.
Regards
Guruvayurappan
Moderator Message: Please search before posting your question. Thread locked.
Edited by: Suhas Saha on Dec 29, 2011 4:57 PM

Hi,
For sending the ALV output as PDF attachment, you can create a spool (proper page size in print parameters) and convert the spool to PDF using the FM CONVERT_ABAPSPOOLJOB_2_PDF and then send the same as attachment in mail.
For send the data as HTML attachment, try the below FMs
WWW_ITAB_TO_HTML_HEADERS & WWW_ITAB_TO_HTML_LAYOUT to create the HTML layout
WWW_ITAB_TO_HTML to create the HTML for the actual data.
Hope this helps you.
Regards,
Sachinkumar Mehta

Attachment in mail shrinks

Hello,
When I go to place an attachment in Mail, a image or jpg, it "shrinks" the size of the file. I have a jpg which is 2048 x 1536 pixels and approx 1MB in file size but when I place it in an email using apple Mail, the file size shrinks down to 320 x 240 pixels and 156KB. There must be a setting or preference or something that is doing this? I've tried to find it but can/t...any help is much appreciated!
Thanks much!
Mike

Michael,
Part of what you are seeing is deceptive and part may be the settings.
After dragging the image to the email message, highlight the image and look down in the lower right of the message frame. You should see a little drop-down menu labeled "Image Size". If it says anything other than "Actual size" then it *+is being reduced.+*
But if it says "Actual Size" then what is sent will be full size, even though it does not appear that way within the message. When the recipient downloads the image it will be delivered full size. You can test this by sending yourself the image set to "Actual Size". Alternatively, you can CTRL-Click the image and select "Quick Look Attachment" then click the opposing arrows to expand it full screen. You will see that the image is intact and not pixilated. If the image was being reduced, a full screen Quick Look would show it pixilated.
Hope this helps. Cheers!

File attachment in mail missing

I am using iphone to read my corporate emails. I received an email with attachment 8MB and was asked to download full message. Once I downloaded the full message, the attachment was missing and a text message (See attached file: filename.zip) was replaced. If I forward the email, the recipient did not received the attachment, even if I chose Include attachment option. Where did the attachment goes? How do I solved this problem?

Hi Jagesh,
The content type of the Pdf has to be identified, in order to conver the pdf successfully, You need to perform the conversion usign the PayloadSwapBean the Module tab. You use this when you want to receive attachment using Mail adapter. You need to configure few steps in Module Configuration
There you need to mention your MIME header paramenters Content-Type, Content-Description.
How this can be configured and how process with PayloadSwapBean check the below link
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
Module Processor
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/content.htm
Regading MessageTransformBean, Migrating Dispatcher Classes
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
Regards,
Prasanna

Sending a excel sheet as attachment in mail

Hi,
I have requirement where I need to send excel sheet as attachment in mail. I could do it by using FM SO_NEW_DOCUMENT_ATT_SEND_API1. But, I am not able to format the excel sheet before sending.
I need to make heading bold, fix column width and wrap text in some cells, and send the mail.
Pls help me with your suggestions.
Thanks,
Siva.

this link will show you how to do formatting in Excel using the OLE method, then use that EXCEL to send the MAIL using your program \
[OLE-format excel |http://www.sap-img.com/abap/download-to-excel-with-format-border-color-cell-etc.htm]
Hope That Helps
Anirban M.

MP3 attachment causes mail to minimize

Similar Messages

Maybe you are looking for