Mplayer-plugin config file errors?
i see in the /etc/mplayer-plugin.conf file entries like this:
# Enable Real Media Support *
#enable-real=[0|1]
enable=1
# Enable Windows Media Support *
#enable-wm=[0|1]
enable=1
maybe that's correct for some reason, but it seemed to me it should say enable-rm=1, enable-wm=1, etc. :?:
as a background/side note: i was trying to stop mplayer-plugin from taking over shoutcast pls streams from xmms, without success. for the moment i've just moved the mplayer-plugin.so file from the mozilla plugins directory, and so far that's working. removing the mime type from the ~/.mozilla/firefox/pluginreg.dat file didn't work, it just got replaced everytime i relaunched the browser, of course. i'm not sure what consquences removing the .so file will have -- so far everything else seems to work -- but if anyone knows a real fix, i'd appreciate it.
***oops, i just noticed, wrong forum. could the mods move it? thx
no, stupid windoze-mentality kindergarten firefox doesn't allow adding of new mime types or helpers. you can only remove or change existing ones.
Similar Messages
-
"Unable to open config file" Error when starting tomcat
hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background threadI have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though. -
[solved] Mplayer-plugin downloads files
Whenever I play an avi with mplayer-plugin, it gets downloaded to my homedir. There's nothing wrong with playback, everything still works, but I wonder why the file is in my homedir. :S I also have to remove the file manually.
Could it have something to do with caching?
I'm also having problems with some streams. They say 'buffering' and then it just stops. When I look into my homedir, sure enough there's a file named playlist (because it's a stream) but it doesn't play.That worked. Thanks.
-
JAR file updating project config file error. Help needed!
Hi all,
I got a problem when I want to use an existed jar file. There is a method called setConfig which can read and update the properties inside a property file which will be located inside the deployed jar file. But when the other project want to use this jar file. It causes the following error:
Property 'configfile' threw exception; nested exception is java.lang.IllegalArgumentException: URI is not hierarchical
The code might cause this error is like:
String temp = configfile.substring(CLASSPATH_IND.length()).trim();
URL url = BaseConfigureFactory.class.getClassLoader().getResource(temp);
try {
tempcfg = (new File(url.toURI())).getAbsolutePath();
} catch(URISyntaxException use) {
throw new IllegalArgumentException(use);
It seems like the url is wrong so that the program can not find the configfile. Does anyone give some suggestions? ThanksI have all of e.printStackTrack( ) in my try - catch block. But i also think the blank screen appears because the class can not find my resources. Maybe it's my fault, because i create by hand a folder name "res" in project folder, then put all my resource in this folder. And in Eclipse when i try to get these resource, i wrote something like this:
Image robot1N, robot1E, robot1S, robot1W;
private void initResources() {
try {
String sb = "car1";
robot1N = ImageIO.read(new File("res\\img\\unit\\" + sb +"_N.png"));
robot1E = ImageIO.read(new File("res\\img\\unit\\" + sb +"_E.png"));
robot1S = ImageIO.read(new File("res\\img\\unit\\" + sb +"_S.png"));
robot1W = ImageIO.read(new File("res\\img\\unit\\" + sb +"_W.png"));
catch(Exception e) {
e.printStackTrace();
}Maybe the string of path to resource is right in Eclipse but wrong in Window? -
Error in the input config file
Continue message previous.
I need deploy my application "notitia". Return message:
Failed to deploy web application "notitiancm". Error in the input config file. Attribute Options is a single value attribute.Don't use EMwebsite. It's SLOW and buggy. I disabled mine.
You can see a lot more error messages using dcmctl:
bin/emctl stop
dcm/bin/dcmctl shell
deployapplication -a myapp -f myapp.ear -co home
geterror
You can also check dcm's and opmn's log files for errors.
Your error message sounds familiar. If you have manually edited http.conf and added multiple entries of ProxyPass or SetEnvIf or who knows what else, you come across an iAS feature. This ias903 core for win2k file
$ORACLE_HOME/dcm/config/plugins/apache/modDirectiveMS.xsd
is no good.
You have to change things like these to maxOccurs="unbounded":
<element name="SetEnvIf" type="string" minOccurs="0"
maxOccurs="unbounded"/>
Then do a
dcmctl updateconfig.
You can find the problem description in Meta-link ohs forum. Apparently the problem will be fixed in 904 but I don't know why we all have to go thru this rite of passage in the mean time... A waste of time.
Ken -
Error in the input config file.....delploying an app on oc4j
Hi,
When I try to deploy an application on an oc4j instance of Oracle 9ias it gives me the following error.
"An error occured while undeploying the application. Error in the input config file. Attribute Group is a single value attribute."
I am deploying the application through the EM website.
Any pointers to the solution?
Thanks in advance
KapilDon't use EMwebsite. It's SLOW and buggy. I disabled mine.
You can see a lot more error messages using dcmctl:
bin/emctl stop
dcm/bin/dcmctl shell
deployapplication -a myapp -f myapp.ear -co home
geterror
You can also check dcm's and opmn's log files for errors.
Your error message sounds familiar. If you have manually edited http.conf and added multiple entries of ProxyPass or SetEnvIf or who knows what else, you come across an iAS feature. This ias903 core for win2k file
$ORACLE_HOME/dcm/config/plugins/apache/modDirectiveMS.xsd
is no good.
You have to change things like these to maxOccurs="unbounded":
<element name="SetEnvIf" type="string" minOccurs="0"
maxOccurs="unbounded"/>
Then do a
dcmctl updateconfig.
You can find the problem description in Meta-link ohs forum. Apparently the problem will be fixed in 904 but I don't know why we all have to go thru this rite of passage in the mean time... A waste of time.
Ken -
Windows event log shows AzureDiagnostics errors "Failed to parse the WAD config file" and warning "
No certficate with given thumbprint found in the certificate store. Thumbprint:" and
System.ArgumentNullException: Value cannot be null.
Parameter name: s
at System.IO.StringReader..ctor(String s)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Validate(String configString, String schemaPath, StringBuilder builder)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Initialize(String configString, String schemaPath)
at Microsoft.Azure.Plugins.Plugin.WadParser.Parse()
Also tried a different deployment on a different subscription, same issue, and this one gets stuck in 'create' state with no roles showing up in 'instances' section for quite some time. Are Cloud Services even maintained by Microsoft
anymore? Seems that they are second class citizens to VMs, no updates, no new portal, no new features, often can't update single role without updating all roles, etc.i am facing same error : here is the log:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Starting DiagnosticPlugin.exe DiagnosticPlugin-ShutdownEvent DiagnosticPlugin-TotalShutdownEvent -wadVer1v3
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Starting DiagnosticsPlugin
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Checking VM Type
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] File HandlerEnvironment.json not found. Extension set to PAAS
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] RcfFileName: C:\Config\881bb2e524c04870b4e993fd8fefb7d8.881bb2e524c04870b4e993fd8fefb7d8.WorkerRole1_IN_0.13.xml
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] RoleInstanceId: WorkerRole1_IN_0; DeploymentId: 881bb2e524c04870b4e993fd8fefb7d8; RoleName: WorkerRole1
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Checking VM Type
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] File HandlerEnvironment.json not found. Extension set to PAAS
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Store Size: 4096
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Reading XML configuration file
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Will use thumbprint
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Decrypting private configuration
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:00:39 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Retrying after 30 seconds. Retry attempt 1
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:01:09 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:01:09 PM] Retrying after 30 seconds. Retry attempt 2
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:01:39 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:01:39 PM] Retrying after 30 seconds. Retry attempt 3
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] System.Security.Cryptography.CryptographicException: The enveloped-data message does not contain the specified recipient.
at System.Security.Cryptography.Pkcs.EnvelopedCms.DecryptContent(RecipientInfoCollection recipientInfos, X509Certificate2Collection extraStore)
at Microsoft.Azure.Plugins.Diagnostics.dll.PluginConfigurationSettingsProvider.DecryptPrivateConfig(String encryptedConfig)
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] WadCfg is provided in initial configuration. Using that to initialize Diagnostics.
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] <PublicConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<WadCfg>
<DiagnosticMonitorConfiguration overallQuotaInMB="4096">
<DiagnosticInfrastructureLogs />
<Directories scheduledTransferPeriod="PT1M">
<IISLogs containerName="wad-iis-logfiles" />
<FailedRequestLogs containerName="wad-failedrequestlogs" />
</Directories>
<PerformanceCounters scheduledTransferPeriod="PT1M">
<PerformanceCounterConfiguration counterSpecifier="\Memory\Available MBytes" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\ISAPI Extension Requests/sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\Bytes Total/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Requests/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Errors Total/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Queued" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Rejected" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Processor(_Total)\% Processor Time" sampleRate="PT3M" />
</PerformanceCounters>
<WindowsEventLog scheduledTransferPeriod="PT1M">
<DataSource name="Application!*" />
<DataSource name="System!*" />
</WindowsEventLog>
<CrashDumps dumpType="Full">
<CrashDumpConfiguration processName="WaAppAgent.exe" />
<CrashDumpConfiguration processName="WaIISHost.exe" />
<CrashDumpConfiguration processName="WindowsAzureGuestAgent.exe" />
<CrashDumpConfiguration processName="WaWorkerHost.exe" />
<CrashDumpConfiguration processName="DiagnosticsAgent.exe" />
<CrashDumpConfiguration processName="w3wp.exe" />
</CrashDumps>
<Logs scheduledTransferPeriod="PT1M" scheduledTransferLogLevelFilter="Verbose" />
</DiagnosticMonitorConfiguration>
</WadCfg>
<StorageAccount>vinaystorageaccounttest</StorageAccount>
</PublicConfig>
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] Private setting is loaded
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] System.ArgumentNullException: Value cannot be null.
Parameter name: s
at System.IO.StringReader..ctor(String s)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Validate(String configString, String schemaPath, StringBuilder builder)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Initialize(String configString, String schemaPath)
at Microsoft.Azure.Plugins.Plugin.WadParser.Parse()
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] Failed to parse the WAD config file
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] DiagnosticPlugin.exe exit with code -106 -
Error in running package with config file
I have a 2012 package and it is referring to a config file which has the DB connectionstring. This config file was created through the "Package Configuration Organizer". When I execute the package through VS 2012, it works fine(Reads the config
from config file), but I get the below error when I run from DTEXEC.
Command:
C:\Program Files\Microsoft SQL Server\110\DTS\Binn>dtexec /f "C:\user\admin\Test\Pack1.dtsx /Conf "C:\user\admin\Test\P1.dtsconfig"
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Copyright (C) Microsoft Corporation. All rights reserved.
Started: 4:13:06 PM
Warning: 2013-12-13 16:13:07.19
Code: 0xC0048000
Source: Process File Process File (SSIS.Pipeline)
Description: The registry key "SOFTWARE\Classes\CLSID\{7F88F654-4E20-4D14-84F4-AF9C925D3087}\DTSInfo" cannot be opened.
End Warning
Warning: 2013-12-13 16:13:07.19
Code: 0x8004801E
Source: Process File Process File (SSIS.Pipeline)
Description: Cannot find the "CurrentVersion" value for component {7F88F654-4E20-4D14-84F4-AF9C925D3087}. The CurrentVersion value for the
t cannot be located. This error occurs if the component has not set its registry information to contain a CurrentVersion value in the DTSInfo
This message occurs during component development, or when the component is used in a package, if the component is not registered properly.
End Warning
Progress: 2013-12-13 16:13:08.00
Source: Select the latest Vendor file from mailMonitor
Executing query "select top 1 (ea.attachment_path), ea.attachment_f...".: 100% complete
End Progress
Progress: 2013-12-13 16:13:08.03
Source: Check if file has already been processed
Executing query "select count(*) from myTable where FileName...".: 100% complete
End Progress
Error: 2013-12-13 16:13:08.03
Code: 0xC000F427
Source: Unprocessed File? (This is an Expression Task)
Description: To run a SSIS package outside of SQL Server Data Tools you must install Unprocessed File? of Integration Services or higher.
End ErrorPlease see if this link helps -
http://dba.stackexchange.com/questions/49786/error-to-run-a-ssis-package-outside-of-sql-server-data-tools-you-must-install
Narsimha -
Getting a "An error occurred while saving values to the app.config file." message
The content of the title is just part of the message I get. The second line of the message is: "The file might be corrupted or contain invalid XML."
I work with a lot of usercontrol libraries, and each one has 1 or 2 connection strings setup, and nothing else. I have no trouble in the code itself using the settings. Nor do I have trouble during runtime with them. But I do have the problem with every single library I work on.
The problem occurs when I make a change to the settings in the VS IDE (2005), which I do whenever I need to the connection string to point to my test SQL server, or need to set it back to the production SQL server. The connection strings were setup in the Settings tab of the Property page for the application.
I get the error message whenever I select the settings tab and again when I go to save it. I once tried deleting the app.config file, and recreating the settings, and the message went away until I checked it in. No one else has the problem when they get the files, but when I get then, I get the error message.
Any ideas what may be causing this. My boss thouight it might be an addon from CodeSMART, but I uninstalled it to see if the errors would go away and it didn't.
Thanks.
MarshallMarshall YoungbloodMarshall,
I am not sure if it helps in your case, but I have the similar problem. Add foloowing lines in your app.config file in configSections tag.
<
configSections>
<
sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<
section name="ApLibrary.My.MySettings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</
sectionGroup>
</
configSections>
let me know if that helps.
Purvi Patel -
[SOLVED] Pacman "config file could not be read" error during Arch ins
I've been attempting to get Arch setup for a while now, and after having some trouble with partitions, my wireless connecting, and setting up repos and mirrors, which the Wiki helped me solve, I've hit a bigger bump. While updating the system using pacman as the Beginners Guide says to do, I get errors when I try to continue the update process as follows :
btw: I'm typing this on a laptop next to my computer
[root@McArch~]# pacman -Syu
error: config file /etc/pacman.d/core could not be read
error: config file /etc/pacman.d/extra could not be read
error: config file /etc/pacman.d/community could not be read
:: Synchronizing package databases . . .
error: failed to updated core (unexpected error)
error: failed to updated extra (unexpected error)
error: failed to updated community (unexpected error)
error: failed to synchronize any databases
Any tips as to whats going on? I've tried to created said files, and even insert mirrors into the file, like in the /etc/pacman.d/mirrorlist file but this doesn't seem to help
Last edited by Windfinder (2008-09-29 20:43:29)Glad you got it working.
I'm not sure what happened in your install but I just finished using an old 2007.08 iso and pacman first starts out with /etc/pacman.d/core, etc/pacman.d/extra, /etc/pacman.d/community ... etc., but I never had your problem when I did the #pacman -Syu after initial install reboot. The pacman update removes the above mentioned repos and replaces them with a single /etc/pacman.d/mirrorlist. You must have messed up an initial config file somehow as I couldn't get the same errors you got. It looks like you had your /etc/pacman.conf file messed up somehow and when you pointed it to the mirrorlist it could finally work properly. I'll just include my /etc/pacman.conf file and /etc/pacman.d/mirrorlist so you can compare. NB* these are from my x86_64 so for 32 bit machines i686 would replace x86_64 in the files.
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
/etc/pacman.d/mirrorlist
# Arch Linux repository mirrorlist
# North America
# - United States
Server = http://mirror.neotuli.net/arch/$repo/os/x86_64
Server = http://holmes.umflint.edu/archlinux/$repo/os/x86_64
Server = http://archlinux.unixheads.org/$repo/os/x86_64
Server = ftp://ftp.archlinux.org/$repo/os/x86_64
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/x86_64
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/x86_64
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = http://mirror.rit.edu/archlinux/$repo/os/x86_64
Server = http://mirror.umoss.org/archlinux/$repo/os/x86_64
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
Well it was an interesting way to kill 30+ minutes. -
---We are trying to setup Hyper-V on Samba shares samba version 3.6 exported from Ubuntu M/c. Basically runnig the Public(share) from the Ubuntu and able to access it from Windows 2012 (create/modify everything). I used Hyper-V and placed the disks
".vhd" on this , VM succesfull created and started. However when I placed the VM config files on this (samba) shares VM created successfully but its not starting, Its giving error like Unable to initialize the saveset -- Any idea how to place the
Hyper-V VM config files samba share?Hi Rakesh KK,
Please confirm your share meet the Serve 2012r2 Hyper-V requirement, you can refer the following KB to get more detail require conditions.
Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins. I have try reinstalling aperture three times, deleting plists a few times, reinstalling plugins, restarting my MacBook Pro many times. Everything I've tried may fix the problem for a very short while and I can export a few photos before it returns. The problem happens with topaz and photomatrix pro plugins after I edited and try to export version.
I had the same problem with the Photomatix plug-in and this solved it for me. I realised it only happened with Photomatix and not other plug-ins so I checked where the plug-ins were installed. The Photomatix plug-in was installed in
~/Library/Application Support/Aperture/Plug-Ins/
where ~ is the home location for the current user account. All the other plug-ins however were installed in
Macintosh HD/Library/Application Support/Aperture/Plug-Ins/
which is the location that makes them available to all user accounts on your Mac. Moving the Photomatix plug-in to this location solved the problem for me.
Note that the Library directory under the first location is normally hidden, to get to it hold down the Option (Alt) key and select it from the Finder Go menu. -
Dear Experts,
I have two WLCs and other management devices as part of same subnet. I am able to upload ‘configs’ from all the devices on to my TFTP server. However when I am attempting to do the same from one of my WLC, it is failing consistently stating error message as:
‘%Error: Config file transfer failed – Unknown error –refer to log
Has anyone else too faced the same issue and how would we overcome this? Any specific debug that could help get more details on it?
Though the error message says, refer to log but still I don’t see anything that gets reflected in ‘Monitor logs’ which is related to ‘configuration file’ upload failure.
WLC code: 7.4.100.0
PFA as the error snippet.
Thanks and Regards,
AdnanHi Kaneswaran,
Just a soft reboot helped me solved the problem :). Still I am on 7.4 and facing no issues after this.
Apologies for coming too late to respond. Getting a down time window was not that easy and so was much delayed to try soft reload. I am still on 7.4 and facing no issue.
Glad that in your case it starting working all of a sudden. Could you please verify from 'show tech-support' to confirm if by chance your WLC had undergone any crash that could have caused the WLC to reload and thus accidently fixing the issue :)
Best Regards,
Muhammed Adnan -
Getting Error: Config file does not have IDStore WLS Administrator Username
I am configuring OIM/OAM in HA mode following the EDG:
- Enterprise Deployment Guide for Oracle Identity Management
- 11g Release 1 (11.1.1.5)
I am at step
- 10.4.5 Creating Users and Groups for Oracle WebLogic Server
I am executing this command:
- idmConfigTool.sh -prepareIDStore mode=WLS input_file=wls.props
Where wls.props has these values:
IDSTORE_HOST: admin.mycompany.com
IDSTORE_PORT: 389
IDSTORE_BINDDN: cn=orcladmin
IDSTORE_USERNAMEATTRIBUTE: cn
IDSTORE_LOGINATTRIBUTE: uid
IDSTORE_USERSEARCHBASE: cn=Users,dc=mycompany,dc=com
IDSTORE_GROUPSEARCHBASE: cn=Groups,dc=mycompany,dc=com
IDSTORE_SEARCHBASE: dc=lispa,dc=local
POLICYSTORE_SHARES_IDSTORE: true
and I am getting this error:
Config file does not have IDStore WLS Administrator Username
Any idea why ?I have added to the property files:
IDSTORE_SYSTEMIDBASE : cn=systemids,dc=mycompany,dc=com
But its not solving the issue.
Here is the log:
Jun 3, 2013 10:01:55 AM oracle.idm.automation.util.Util setLogger
WARNING: Logger initialized in warning mode
Jun 3, 2013 10:01:59 AM oracle.idm.automation.impl.oid.handlers.OIDIntegrationHandler validateInputParams
SEVERE: Config file does not have IDStore WLS Administrator Username
Please advise on how to resolve this issue -
Revision: 16197
Revision: 16197
Author: [email protected]
Date: 2010-05-18 15:07:01 -0700 (Tue, 18 May 2010)
Log Message:
Config file changes to reflect the folder structure changes of libs and plugins
Modified Paths:
osmf/trunk/apps/samples/framework/DynamicStreamingSample/DynamicStreamingSample-build-con fig.xml
osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml
osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest-build-config.xml
osmf/trunk/framework/OSMFIntegrationTest/osmfintegrationtest-build-config.xml
osmf/trunk/framework/OSMFTest/OSMFTest.mxml
osmf/trunk/framework/OSMFTest/osmftest-build-config.flex
osmf/trunk/framework/OSMFTest/osmftest-build-config.flexcov
osmf/trunk/framework/OSMFTest/osmftest-build-config.xmlGrant,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Maybe you are looking for
-
OIM11g R1: Error Creating Authorization Policies
Hi All, While creating custom authorization policies, I am getting a window popup with below error message: files: <OIM_ORACLE_HOME>/server/apps/oim.ear/admin.war/WEB-INF/lib/OESOIMTaskFlows.jar/taskflows/policycreate/DataConstraints.jsff ADF_FACES-6
-
Error when call webservice on servlet
Hi All, I'm having a problem when calling webservice inside the servlet on the WebLogic environment. My code: * Webservice: package ws; import java.sql.Connection; import java.sql.DriverManager; import java.sql.PreparedStatement; import java.sql.Resu
-
64-bit compilation problem on Solaris/Intel: 7th argument not initialized
I have a problem when compiling a program on a 64-bit Solaris Intel server. The problem is that when calling a function, if the 7th or next arguments are long arguments and I pass uncasted small integers values to it, the first 32-bit of my values ar
-
I do it from iTunes but then when I go to "hidden apps" on "my account" it's not there uploaded. Then I come back to "purchased" and I see the app. What can I do? What's not working?
-
New RMBP cannot sleep secondary display
Hi, I recently got a new MBP, i'm going from a 2009 17" to a 2012 Retina 15". My old setup had my 17" connected to my dell 3011U 30" secondary display via a minidisplayport->displayport cable. Worked like a charm, no issues. Could do one display or b