????Mr. Dennis Knutson Please see the subvi for HP34903A switch. Did I make any mistakes?

I just add the 34970A Initialize.vi and 34970A Close.vi together with 34970A switch.vi. I tried the experiment again and again. I still can not open/close the 34903A switches indepedently on slot2. Please see the attached vi. Did I make any mistakes?
Attachments:
HP34903Asw.vi ‏49 KB

You're calling initialize every time. If you look inside this VI, you'll see that if you don't choose reset, the command SYSTRES is issued which will preset the instrument to a known configuration. You do not want to call initialize every time. It is enough to call it at the very beginning of your program and then just call HP34970A Switch.vi by itself whenever you want to open and close a relay.

Similar Messages

  • When trying to create connection using Contribute 6.5, get error message "Unknown error.  Please see the log for detail."  The log says "Network connection timed out."  What do I do now?

    Have been using Contribute 6.5, and earlier versions, for years with Hostway without any problems.  All of a sudden I cannot create a connection to our website.  Tried to chat with Adobe a twice now and got no help.  Yesterday they started a chat with me, then ended the session without any communication!  My problem has been going on for several weeks now.  I uninstalled Contribute, downloaded and installed again, but it did not help.  Hostway had me connect with Zilla and everything worked fine.  So, they say the problem is with Adobe.    The last attempt ended with "Unknown error. Please see the log for detail."  The log says "Network operation timed out."  Does anyone have any suggestions?

    Hi There,
    Can you please try using any other Internet connection outside your company's network and see if it is working? Alternatively, Can you please try the below settings from the Advanced... Menu while creating the connection using FTP details and try to create the connection again:
    Regards,
    Mayank

  • Please see the log for more details.... where to find the log???

    Hi everyone,
    I have a WebI document in our DEV environment that I am trying to transport to PROD.
    When I try I get the message:
    Commit Status=Commit attempted and failed., Promotion Status=Failure : Object  has failed to promote. Please see the log for more details
    But where do I find this log that has more detail?
    As background, the document in PROD is corrupt and I want to replace it with the working copy from DEV. Perhaps the fact that the PROD document is banjaxed is the issue but I don't know.
    Many thanks
    Gill

    Hi Arvind,
    We are going live to live on the promotion side of things.
    Test promotion tells me everything is OK :-(
    I appreciate your workaround solution, I would like to understand full what's happening and put a more permanent solution in place.
    With regards
    Gill

  • Which respoitories to use? please see the thread for the scenario!

    Hello Guru's,
    I want to use KM Repositories instead of using the Content Repository which we create in Backend system using OAC0 T.Code.
    The requirement is to store employee photos so that can be linked to Image Container used in Who's Who application of ESS.
    http://www.sd-solutions.com/documents/SDS_Employee_Photos_v4.7.html
    I went through the above link but want to use KM Repository instead.
    Please provide me inputs of what kind of repositories exist in KM and what for those repositories are used and which one to use in our scenario.
    I went through all the help docs, would appreciate if anyone can send step by step config of how to use and which one to use.
    Any inputs are appreciated.
    Thanks in advance for your time.
    Pramod

    HI
    The requirement is to store employee photos so that can be linked to Image Container used in Who's Who application of ESS.
    if u want to make your task simple just use default documents repository a type of cm repository as also said by prem.
    Regards,
    Vijay.

  • Failed to retrieve a schema URI (document namespace) for /userprofiles/emailNotification.usr; please see the following exception for details

    I get this exception (and long stack trace) when attempting to start my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm using Oracle 8.1.7. I upgraded this application from weblogic portal 4.0, and never had this problem there. As part of the migration process, I ran the tool to migrate all of the database tables, and I re-synched the EBCC project using version 7 of EBCC. I did a search for this problem and found a few mentions of it that seemed to be related to Oracle's handling of CLOB data. Apparently, there is a patch, but I can't seem to find this patch. I'm also not sure if this is indeed the problem since I didn't have this issue with the older version of weblogic using the same database. Any suggestions?

    If you have a support contract please open a case so we can work through
    this problem.
    Can you run an sqlplus session on your database, execute the commands
    "delete from data_sync_item" and "commit", then resync to see if it will
    get you around the problem. The data_sync_item table will be fully
    populated after you sync. This should get you running.
    Between 4.0 and 7.0 the DefaultRequestPropertySet.req file was reduced
    in size -- the CLOB would be smaller in the data_sync_item table.
    I would recommend using the Version Checker against your installation --
    find it on the dev2dev.bea.com site to see if the upgrade installer work
    ed properly. Also consider running the full installer to avoid possible
    problems that might occur with upgrade installers.
    As a result of that patch you referenced in 4.0 the CLOB handling logic
    was changed in 7.0 -- this is why it is strange you are seeing cleaving
    errors. In 7.0 SP2 to be release next week the data sync and
    persistence code was changed also.
    Are you using the OCI or Thin driver?
    -- Jim
    Rob Goldie wrote:
    Jim Litton <replyto@newsgroup> wrote:
    Rob,
    The CLOB issue was related to wlportal4.0 and should not be a factor
    in
    7.0.
    Could you post the entire stack trace?
    ####<Jan 27, 2003 4:21:47 PM EST> <Warning> <Data Synchronization> <PFIDEV5> <pfeAricept1Server>
    <main> <kernel identity> <> <000000> <Application: gmiAriceptApp; Failed to retrieve
    a schema URI (document namespace) for /request/DefaultRequestPropertySet.req;
    please see the following exception for details.>
    Exception[com.bea.p13n.management.data.doc.DocumentProcessingException: Unable
    to analyze and/or cleave document]
         at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:94)
         at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
         at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
         at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
         at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
         at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
         at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
         at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
         at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
         at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
         at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
         at weblogic.j2ee.Application.addComponent(Application.java:294)
         at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
         at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
         at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
         at $Proxy9.updateDeployments(Unknown Source)
         at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
         at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
         at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
         at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
         at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
         at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
         at weblogic.Server.main(Server.java:32)
    Caused by: org.xml.sax.SAXException: No message available. Resource not found:
    repository.cleaver.no.xsi.namespace.exception Resource bundle: com/bea/p13n/management/data/datasync
         at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.mapNamespaces(DocumentCleaver.java:135)
         at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.startElement(DocumentCleaver.java:235)
         at weblogic.apache.xerces.parsers.SAXParser.startElement(SAXParser.java:1384)
         at weblogic.apache.xerces.validators.common.XMLValidator.callStartElement(XMLValidator.java:1299)
         at weblogic.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentScanner.java:1821)
         at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:964)
         at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
         at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
         at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
         at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
         at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:80)
         at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
         at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
         at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
         at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
         at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
         at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
         at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
         at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
         at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
         at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
         at weblogic.j2ee.Application.addComponent(Application.java:294)
         at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
         at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
         at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
         at $Proxy9.updateDeployments(Unknown Source)
         at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
         at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
         at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
         at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
         at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
         at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
         at weblogic.Server.main(Server.java:32)
    Are you using a UTF-8 Oracle database?
    Yes
    If you create a new User Profile in the EBCC and compare it to your
    migrated .usr file do you see differences in the DTD's?
    I recreated a new version of the .usr in the EBCC, and still got the same error.
    I also tried deleting everything from the data-sync-item table and re-synching.
    What does the DocumentManager section of your application-config.xml
    look like?
    <DocumentManager
    ContentCacheName="documentContentCache"
    ContentCaching="true"
    DocumentConnectionPoolName="default"
    MaxCachedContentSize="32768"
    MetadataCacheName="documentMetadataCache"
    MetadataCaching="true"
    Name="default"
    PropertyCase="none"
    UserIdInCacheKey="false"
    />
    What does the document.jar Targets="" parameter look like in config.xml?
    <EJBComponent Name="document" Targets="pfeCluster" URI="document.jar"/>
    -- Jim
    Rob Goldie wrote:
    I get this exception (and long stack trace) when attempting to start
    my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm
    using Oracle 8.1.7. I upgraded this application from weblogic portal
    4.0, and never had this problem there. As part of the migration process,
    I ran the tool to migrate all of the database tables, and I re-synched
    the EBCC project using version 7 of EBCC. I did a search for this problem
    and found a few mentions of it that seemed to be related to Oracle's
    handling
    of CLOB data. Apparently, there is a patch, but I can't seem to find
    this patch. I'm also not sure if this is indeed the problem since I
    didn't have this issue with the older version of weblogic using the
    same database. Any suggestions?

  • CS4:  "Critical errors were found in setup. Please see the setup log for details" !!

    I am using Win XP Pro SP3. I have CS3 installed, and successfully installed Dreamweaver, Fireworks and Flash from CS4 Design Premium. Then I successfully uninstalled DW, FW and FL CS3.
    When I tried to open a SWF in Illustrator it failed to open, and then I tried to create a really simple SWF (a rectangle) by exporting from Illustrator and tried to open that and it also failed. Whenever I tried to open or place ANY SWF into Illustrator I get a "file *** is in an unknown format and cannot be opened" error.
    I decided there must be a corrupt file, maybe the upgrade must have affected some Illustrator files, so I tried to repair the CS3 installation. After over 2 hours of INTENSE FRUSTRATION having to constantly switch CS3 and CS4 disks many MANY times, the installation failed, listing "common files" that were missing from non-existent folders such as "C:\Documents and Settings\[username]\Desktop\Adobe CS4\Fireworks CS4\payloads\etc
    When I tried to repair the CS4 installation after loading all the profile settings it errors before the installation window comes up, with "Critical errors were found in setup. Please see the setup log for details". Then it shuts down the installer. I then tried to do a system restore and system restore failed on all restore points!
    Please help:
    1. Where is "the setup log"?
    2. Will creating and populating the folders mentioned in the failed CS3 installation from the CS4 disk allow it to work?
    3. How can I uninstall CS4 if I can't even get to the installation window?
    4. Has Adobe just DESTROYED MY REGISTRY BEYOND REPAIR!!!???

    im haveing a huge irritation useing illustrator cs4 live paint bucket because i can use everything else apart from the paint bucket which should be the easyiest tool to use sometimes it works with the white arrow sometimes it doesnt i sometimes get this below message
    the selection contains objects that cannot be converted. live paint groups can only contain paths and compound paths. clipping paths are not allowed
    the lines which i have drawn are connected which i believe have to be in order to use the paint bucket and i have no clipping paths so i am am baffled
    i presume it is because the line is set to 0.01 it seems the live paint bucket wont notice thin lines, but i tried makeing the line thicker so i could use the paint bucket and it still doesnt work.

  • Critical Errors Were Found in Setup. Please see the Setup Logs for Details

    Hello everyone. I have recently gotten Adobe Flash CS4 and i was really happy, until i kept getting the same error whenever i tried to install:
    "Critical Errors Were Found in Setup. Please see the Setup Logs for Details"
    I do not know what is the cause of the problem, but i have installed Adobe Photoshop CS3 succesfully without any problems. Please do help. I checked the setup logs, but i have no clue what it is saying, and its too long to post here.
    Thank you for your time and help.

    We've all been there with the frustration.
    And I'd really like to see you get back up and running. I'm a bit of an insomniac and tend to go back over the day while I'm pretending to sleep, and a couple of new things filtered back into my mind. There have been, I think, some problems reported about conflicts with some scanner drivers, and of course with firewalls, anti-virus programs, and the like. I think iTunes and instant messengers are also on that list.
    Make sure you turn off everything non-essential before trying to do your installation (and I'd probably do the same thing before running the scripts again). I do this by running MSConfig on XP and going to the startup tab. I uncheck everything I can't identify as being essential (which means I pretty much only leave the mouse driver checked. You may need to google some of the stuff to find out what it is) and then go to the services tab and hide all Microsoft services. From what's left I again uncheck everything that isn't required to run the system. Bonjour, if you see it, should be left active as it is used by the CS3 installer. Restart the computer.
    This should have turned off pretty much everything that could have been conflicting with the installer. Go to windows security center and make sure the windows firewall is also temporarily turned off, if you use it, and you should be ready to go. It can't hurt to try the add/remove programs again, but it probably won't show any adobe products anymore if you've run the scripts correctly (did you also run the MSI cleanup utility?).
    After you've finished, you can run MSConfig again and reset to standard startup.
    Peter

  • ADF_FACES-60097:For more information, please see the server's error log for

    HI
    when we login in to the Em and then try to navigate to the core applications server under the business intelligence Domain it gives the bellow Error message
    Stream closed
    ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #5
    and when we check the server error log then we got the below log
    >
    ####<Jun 2, 2013 10:08:05 AM GST> <Error> <oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator> <obitst.oasiserp.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d02e32166b4c953b:7cceca3a:13ef5c15d45:-8000-000000000000065f> <1370153285886> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #2
    java.io.IOException: Stream closed
    at java.io.BufferedInputStream.getInIfOpen(BufferedInputStream.java:134)
    at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
    at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
    at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:416)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:315)
    at oracle.jsp.parse.XMLUtil.getDocument(XMLUtil.java:447)
    at oracle.jsp.parse.OracleJsp2Java.transformImpl(OracleJsp2Java.java:402)
    at oracle.jsp.parse.OracleJsp2Java.transform(OracleJsp2Java.java:593)
    at oracle.jsp.runtimev2.JspPageCompiler.attemptCompilePage(JspPageCompiler.java:691)
    at oracle.jsp.runtimev2.JspPageCompiler.compileBothModes(JspPageCompiler.java:490)
    at oracle.jsp.runtimev2.JspPageCompiler.parseAndGetTreeNode(JspPageCompiler.java:457)
    at oracle.jsp.runtimev2.JspPageInfo.compileAndLoad(JspPageInfo.java:624)
    at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:645)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:385)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:810)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:734)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.JSPFilter.doFilter(JSPFilter.java:93)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
    at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
    at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
    at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
    at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
    at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
    at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
    at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
    at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:469)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)
    at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
    at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
    at oracle.sysman.emSDK.adfext.ctlr.EMViewHandlerImpl.renderView(EMViewHandlerImpl.java:157)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >

    Hi Timo,
    I check it :
    Caused by: java.lang.NullPointerException
      at cic.portal.Currencys.createCurrency(Currencys.java:24)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      ... 56 more
    When i click: at cic.portal.Currencys.createCurrency(Currencys.java:24) ---> it's call to method beans:
        public void createCurrency(PopupFetchEvent popupFetchEvent) {
                 if (popupFetchEvent.getLaunchSourceClientId().contains("create")) {
                       BindingContainer bindings = getBindings();
                       OperationBinding operationBinding = bindings.getOperationBinding("CreateInsert");
                       operationBinding.execute();
    this method is Popup: popupFetchListener="#{currencys.createCurrency}">
    I thing lines :
    OperationBinding operationBinding = bindings.getOperationBinding("CreateInsert");
    operationBinding.execute();
    it not working, i have no idea for this..

  • Dear sir thanks for new ios7;please see the calendar in hijri shamsi and compare it with original calendar! Why this difrence? Please compatible start of the years from 1st of farvardin month.

    Dear sir thanks for new ios7;please see the calendar in hijri shamsi and compare it with original calendar! Why this difrence? Please compatible start of the years from 1st of farvardin
    1392/01/01 = 21/march/2013

    Apple does not participate in this forum, it's only used by users like you.

  • I send mi link for podcast and i dont have answer, please where can i see the satus for aprobal

    where can i see the status for mi podcast?
    i got the mail that is in process but never the answer that was aproved or not!
    that was 5 days ago
    Thanks

    It can take at least two weeks for a podcast to be approved - sometimes more - as it required human intervention and there may be a large backlog. It's just a question of waiting. As you've received the acknowledgement email things are plainly underway, and all being well you should get an acceptance email eventually, giving you the URL of your Store page.

  • Cannot preview filetype please download the file for viewing and garbled text on a downloaded image

    Dear Madam or Sir,
    When I click on a file titled "Subject Access Request Letter re Account Number 12527629 Sort Code 60-10-34 24022015.pdf", which is stored in my Account on Acrobat.com I get the response "Cannot preview filetype please download the file for viewing". This file was created from an OpenOffice .odt document of the same title. Please advise.
    I downloaded an image, which purports to be a .pdf, from the Royal Mail Track & Trace web facility using my Samsung S5. The text that I expect to see might as well be hieroglyphics for all its similarity to text. Please advise.
    Regards,
    Ron Platt
    PS I have tried to attach both files (.pdf) but am advised "That image type is forbidden". Please advise.

    Hi Laura,
    I have found the solution to be:
       1. Not to upload to "Document Cloud" from the .pdf stored on my PC and
       open on screen.
       2. To login to Acrobat.com from the .pdf stored on my PC and open on
       screen, select "Document Cloud" and the sub-folder required and then upload
       the file
    I have a feeling that there is a glitch somewhere, because after I have
    opened a number of .pdf files stored on my PC, and irrespective of whether
    I have closed them prior to opening the next .pdf file or left them open,
    Acrobat Reader will display (Not responding) in the window title bar. The
    "number of files" equates to less than 10. I, then, click on the X at the
    right of the window title bar and I am given the option of "Close the
    program" or "Wait until the program responds" (or words to that effect). If
    i choose the latter, nothing happens and I am back at the unhappy status
    quo. If I choose the former, I am told that Windows is searching for a
    solution, which it never finds. I, then, have to shut down the PC and then
    start it up, again. Clicking "Restart" does not solve the problem.
    I have described the above before and received the usual "it cannot be
    Acrobat, it is perfect" response. I could, I suppose, screenshot/snip every
    sequential screen but why should I have to when I have described the
    sequence as fully as I can. So I have found a "workaround" that does not
    solve the "Not responding" problem but does solve the problem of not being
    able to upload from the open .pdf file to the sub-folder in "Document
    Cloud". I am, on occasion, working through the myriad of .pdf files that
    are in the root folder of "Document Cloud" and putting them in the correct
    sub-folder(s).
    I have today read that Google is starting a cellphone service in the USA in
    which a monthly "access" rental (US$20) is paid plus a GB capacity usage is
    elected for at a rate specified, e.g. US$10.00/GB. If the subscriber  does
    not use the elected GB capacity Google refunds the US$value of the unused
    elected GB capacity.
    Suggestion: Adobe applies that kind of policy to its online software
    package usage rates, e.g. I elect to subscribe to a particular level of
    online software package usage monthly, but, if I do not use all of the
    programs included in that online software usage package, I am credited back
    for not having used the softwares, that I did not use, that were inclusive
    in that online software package offer.
    Regards,
    Ron

  • Please share the URL for downloading Weblogic 8.1 with admin server

    Hi,
    Could you please share the URL for downloading the weblogic 8.1 server with admin option for redhat llinux.
    Also could you please me whether we can download the installation guide from some site, I want to do a silent installation of same.
    Regards,
    Balu.

    Hello, you still seem to be pointing people to site(s) that [www.certguard.com] indicates may lead them to lose their certifiaction: viewers please also see also the route you choose ... The Route You Choose
    Edited by: bigdelboy on 01-Jun-2009 08:39 (Please note this refers to a spamming post not to the original post of the thread).

  • When using the online editor in our wordpress blog on any other online editor I get this error "Your browser security settings don't permit the editor to automatically execute cutting operations. Please use the keyboard for that (Ctrl+X)" Please help.

    I have online editors for our blog and websites for generating articles and blog posts. Different editors from different sites and programmers. Firefox doesn't allow me to use the cut/paste/copy functions with these editors. I get this message or something similar every time. "Your browser security settings don't permit the editor to automatically execute cutting operations. Please use the keyboard for that (Ctrl+X)"

    See:
    *http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
    *https://addons.mozilla.org/firefox/addon/852 - AllowClipboard Helper

  • So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work.

    So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work. Any help would make my day...

    I got some more info that may help.
    I put a cd on my laptop, and was able to share it to my computer... So the problem is only from my computer to my laptop. I tried the firewall thing and it did not help. I read the rest of the trouble shooting page, and nothing else applies. iTunes is an execption and already was. I can not think of anything else being my problem. Do you think I should re-install iTunes or would that be a waste of time? At this point I am about to just call Apple for some help because I am getting to stressed over this.
    Thanks

  • The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

    The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
    I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
    Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

Maybe you are looking for