MRP stoage location -  create reservation and external demand

Hi
Our company using  MRP for sloc - ROP - type VB
plant 1000 with
sloc 1 (Distribution Center)
sloc 2 (branch) - planning at storage location
sloc 3 (branch)  -planning at storage location
currently if I run MRP, a reservation is created from sloc 2 & 3 to plant 1000
and sloc1 will tranfer the stocks to sloc 2 & 3
Question 1: Can a reservation be created together with a PR at plant 1000 as the product need to be purchase from external vendor whenever a MRP is executed?
currently I manipulating the ROP at Plant level to take into requirement for sloc 2 & 3
Please advice

A,
I am not sure I understand the question.  Are you saying that you want to create a purchase req to move stock from 'plant general' to Sloc 2 or 3? Or, do you wish to generate a PurReq from a 3rd party vendor into plant level stock?   or what?
It sounds like you are currently using replenishment via "stock transfer from storage location to storage location in a plant' for your sloc 2 & 3.  There are other methods.
If you are using VB against the material/plant, the only time you will generate a purreq is when plant stock (Sloc 123) falls below plant ROP.  VB doesn't care if/when you shuffle stock amongst the various storage locations.
Read the online help, which outlines all of your options.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/f4/7d2d3344af11d182b40000e829fbfe/frameset.htm
Best Regards,
DB49

Similar Messages

  • Item Reservation and Supply/Demand

    Oracle 11.0.3
    For some reason there is an item has some closed orders still showing in the reservations. Can anyone please tell why they are not deducting from the quantities on hand and disappearing?
    Thank You!

    In order for the reservation to be cleared out, the delivery details (shipping transactions form) needs to be ship confirmed, and the inventory interface should have completed ok. The Sales order can be closed after ship confirm when the OE interface is completed (even though the inv interface has not).
    In the shipping transactions form, once found the line, go to Help menu > Diagnostics > Examine change value for "field" to INV_INTERFACED_FLAG.. check if it is "Y". If it is "P" then there is an error in the interface and then you need to review the errors in the Inventory responsibility in Transactions Open interface flag .. or re-run the Interface trip stop for INV interface only (with debug enabled).
    If none of this work, you migh need to log a tar to have this verified and if there the transaction was indeed interface to inv then you might need to run a clean up script... check Metalink for this script.
    hope it helps
    Fabio

  • Powershell To Locate, Create, Delete, and Edit Exchange Contacts

    Hello,
    I have been tasked with creating about 160 Exchange contacts. I'm finding that some of the email address listed are secondary email addresses for other users. I am in need of assistance for the following.
    - Determine which contacts in my list have already been created.
    - Determine which addresses on my list are already in Exchange as secondary SMTP addresses for different contacts/mailboxes.
    - For the addresses that are not in Exchange I will need to mass create them.
    - For the existing contacts that have addresses in my list, I will need to delete the secondary SMTP that matches ones in my list and create a new contact for the SMTP.
    Really not sure how to work this one. Any assistance would be appreciated.
    Thanks in advance,

    Hi Green-Tech,
    Please refer to this script to start, which can delete secondary SMTP addresses based on the string pattern "*@domain.local":
    Get-MailContact -OrganizationalUnit "domain.local/OU" -Filter {EmailAddresses -like "*@domain.local"} -ResultSize unlimited -IgnoreDefaultScope | foreach {
    $contact = $_
    $email = $contact.emailaddresses
    $email | foreach {
    if ($_.smtpaddress -like "*@domain.local") {
    $address = $_.smtpaddress
    write-host "Removing address $address from Contact $contact.name
    Set-Mailcontact -Identity $contact.identity -EmailAddresses @{Remove=$address}
    $contact | set-mailcontact -emailaddresspolicyenabled $false} }}
    Refer to:
    Powershell script to delete secondary SMTP addresses of Exchange 2010 Mail Contacts
    I also recommend you can post your current script and specific issue for a better response.
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How tro create a Internal and External repository?

    Hi Gurus,
    I am new to KM can someone tell me what is the prerequsities for creating Internal and External Repository?
    and give me the steps for creating Internal and External repository?
    Thanks in Advance,
    Dharani

    Hi Dharani,
    Refer this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/69/d96b7da84611d5993600508b6b8b11/content.htm
    regards
    Parth

  • Receiving storage location in reservation created manually CAN NOT change

    Hello All,
    i created a reservation manually by transaction MB21 with std movement type 311, then i can not change the receiving storage location in transaction MB22 due to the field status of receiving storage location is display only, but not optional.   That means i can not change receiving storage location of reservation if i entry mistaken.
    So, how can i change the receiving storage locaiton  by MB22 for a open new reservation? thanks.
    Best Regard
    Joseph Chen

    in mb22 if the field is in display mode, it is not possible to change.
    It is not possibsle to  change through screen layout for reservations.
    so delete the present one and crate new reservation.

  • 11.0.3 MRP creates WIP for dep demand at other plant - need internal req

    At one manufacturing plant for finished good item, have component sourced from other plant. When MRP runs it creates WIP Job for component sources at other plant, need is to have internal req. Please advise what needs to be changed.
    Ex - Finished Good is Car at chicago plant, one of main subcomponent wheels is from mexico plant.
    Wheels are setup as buy, with inventory source type and source plant from mexico in item attributes at chicago org.
    This wheels item is setup at mexico plant.
    MRP release of planned order is creating WIP job at mexico plant for wheels component.
    we want mrp release of planned order should create internal requisition when demand for finished good car comes at chicago plant.
    Please advise what needs to be changed in 11.0.3 environment.

    Hey there,
    I think you should check your SOURCING RULES for those items wheels.
    Make sure the sourcing rules are of "TRANSFER FROM" type with the right org and not "MAKE AT".
    Hope this helps, if you find it helpful or correct please kindly mark it as such,
    Aaron

  • Extract open reservation (with open demand in MRP)

    Dear PP experts,
    Would you know how we can extract a list of open reservations (ie. with demand still visible in MRP) ? We essentially manage sales orders, production orders, services orders and PIRs. We were able to extract open reservation for production orders using various criteria on RESB table (eg. bulk material blank, final issue blank, etc...). However criteria for services orders are differents...
    Is there any MRP related table which provide this information? Or would you have some hints to accomplish this. My customer want to be able to extract a basic list for sanity review.
    Thanks in advance for your help,
    BR,
    Francois Paquet BA

    Hi,
    I can think of 2 options:
    1. Use report - MB25, to get a list of material reservations. In the scope of list you can check open reservations. Also there are other selection options with which you can restrict the data read, check the same.
    2. Build a Z report using FM - MD_STOCK_REQUIREMENTS_LIST_API this would give the same info as MD04 & you can then have custom input & output fields as per your business need.
    Adopt the one which best suits your need.
    Regards,
    Vivek

  • Linkage between the reservation and the requisition is lost in case of MRP

    Input data:
    2 reservation documents are created from PS:
    reserv. 1212, Mat. 11111, quant. 50, date 01.08.08
    reserv. 2121, Mat. 11111, quant. 100, date 01.08.08
    after performing MRP and processing reservation 1 document is generated at MRP output -
    purchase requisition  Mat. 11111, quant. 150, date 01.08.08.
    Task: how to disable uniting similar requirements during MRP run, i.e.
    according to the above mentioned example there should be 2 requisitions at the output:
    purchase requisition 333, Mat. 11111, quant. 50, date 01.08.08
    purchase requisition 334, Mat. 11111, quant. 100, date 01.08.08
    Task 2:
    How can the analyst add to the newly generated requisition the number of reservation based on which this requisition has been generated or how to set (how not to lose) linkage between reservation and requisition:
    E.g.: purchase requisition 333, Mat. 11111, quant. 50, date 01.08.08, reservation 1212.
    Probably it may be done with BADI MD_PURREQ_CHANGE, but it is not clear how to define the implementation point.
    Thank you.
    Regards, Victor.

    Hi Victor
    The 1st part of your question:
    The requirement of reservation is on same date ,hence sigle PR is generated.you have not mentioned  what is lot size key being used.
    Probably you can try with Lot size key "EX" ( I am not sure).
    The second question:
    you can analyse like this:
    Got MD04 & see the pegged requirements . This way you can know what is the origin of requirement for a particular PR.
    Regards
    YMREDDY

  • I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items. Help.

    I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items.  What happened and how do I get my mac to rerecognize the device?!?!?

    Hi,
    Check Finder>Preferences>Sidebar, is it checked there to show external drives?

  • How to create a button in a interactive document and use the button to launch and external "exe." file.

    I created an interactive document and will export as a swf.  I would like to create a button in the interactive document to launch and external "exe." file. Is this possible.

    You will need to create custom web part editor. Look at the following example. It also have added button and its events. I am sure you can use this sample as base and code your logic.
    http://msdn.microsoft.com/en-us/library/hh228018(v=office.14).aspx
    Amit

  • I can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive.

    i can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive. Help please ?

    Most likely, the "requested location" where you are trying to copy files to does not have WRITE permission, and so you need to change the permissions.

  • How to create the maps externally and import in to PI

    Hello Gurus,
    Please let me know how to create the maps externally and import into PI
    Regards
    shankar

    Hi,
    Hope these links could help you understand XSLT, JAVA nad ABAP mappings.
    [http://www.riyaz.net/blog/beginners-guide-to-xslt-mapping-in-sap-pi/technology/sap/769/]
    [http://www.dataxstream.com/2009/09/allow-additional-mapping-types/]
    [http://www.riyaz.net/blog/sap-pi-abap-mapping-simplified/technology/sap/837/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3ARiyaznetBlog(riyaz.net)]
    [http://www.riyaz.net/blog/xipi-java-mapping-demystified/technology/sap/415/]
    Regards,
    Prasanna.

  • I have a MacBook Pro and it cannot locate my Western Digital External Backup Drive.

    I have a MacBook Pro and it cannot locate my Western Digital External Backup Drive.  It used to work prior to Maverick but now it doesnt.  Do I need a different cord or what can I do so I can use Time Machine with this drive?

    Your problem is really with "Time Machine", backup software included with OS X since version 10.5, not with your Time Capsule router.  For more information on Time Machine, check these Web pages:
    Time Machine FAQs
    Time Machine Troubleshooting

  • Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.

    Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.

    Hi Tom,
    Looks like we have problem here as we see another blank post from you here. It's probably something to do with your email. Let me send you a PM with my email address and we can communicate that way.
    Thanks,
    Kevin

  • DNS records to be created for Lync deployment (Internal and External)

    Hi There,
    If I want the Lync server environment to work Internal as well from External in all the aspects. (auto-discover, meetings, AV conferencing,web conferencing, voice integration, mobility etc), please answer to the below questions and also their purpose please.
    I'm not sure whether the answer varies for 2010 and 2013 version.
    1. What are the Internal and External(public) DNS records to be created for the reverse proxy(assume i'm using TMG servers), and their purpose?
    2. What are the Internal and External(public) DNS records to be created for Lync Edge server, and their purpose?

    I'll try to answer as well.
    1) For the reverse proxy, you'll need to publish the following:
    External:
    lyncdiscover.sipdomain.com (You'll need this record for every sip domain you have).  This is for client autodiscover.
    external web services FQDN (You'll need one of these per pool, you get to choose the name).  This is for address book downloads, web conferencing, etc.
    Meet.sipdomain.com (You can choose the name here, and have one per sip domain or one for the whole org).  This is for web conferencing.
    Dialin.sipdomain.com (You'll just need one here, it doesn't have to be dialin).  This is for changing your conferencing/phone pin, resetting conference info, and general conferencing info.
    For Lync 2013 only, you may want the Office Web Application server pool name as well for PowerPoint sharing.  Lync 2010 doesn't use this.  
    Internal:
    The external web services FQDN.  You'll need this available internally through the reverse proxy so you can redirect requests on port 443 to port 4443.  This will be used for mobile devices on WiFi.
    2) For the Edge server:
    Externally:
    sip.sipdomain.com (you'll need one per sip domain) this is an autodiscover/multi use FQDN and should point to your access edge IP.
    webedge.sipdomain.com (edge web conferencing, you can pick any name you like).
    avedge.sipdomain.com (av edge, you can pick any name you like).
    accessedge.sipdomain.com (you'll need a name for the access edge role, however you can just use sip.sipdomain.com and save a name in your certificate request).
    Internally:
    edgepool.sipdomain.com (you can pick any name you want, it's just the name assigned to the internal edge interface.
    If you choose to have a single ip for the external edge, you can get away with just an access edge name and/or sip.sipdomain.com
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for