MRP to generate PR once in every 45 days
Hi PP experts
I have a requirement to fullfil the needs to generate a collective PR for requirements pending for next 45 days. PIRs are maintined for around 90 days based on the forecast. Materials are ordered based on their ABC category. For all A class materials PR generation is dynamic. For all B class materials the requirement needs to be clubbed and a single collective PR is required for 45 days and forall C class mateials one PR for requirement pending for 6 months, There is no PP here and all the materials are externally procured and sold.
Please suggest me the settings required for achieving this. Thanx much in advanxce.
with best regards
Nags
Edited by: Nagaraj Chaganti on Oct 13, 2011 8:11 PM
Hi Leon Shen
Thank you for the suggestions. I created a lot sizing procedure for 45 days with
Lot sizing procedure as 'P' - Period Lotsizing
Lot size indicator 'T' - Daily lot size and
No, of periods as 45.
Assigned the lot sizing key in the material and ran MD03. PR is being generated for 60 day requirements and not for 45 days. I am not sure what I am missing,
Requirement was for B Class - 45 days and C class - 60 days (I mentioned in correctly as 6 months). Meanwhile, I created a lot sixe key for 2 months and it works well for the C class materials. A PR is generated for the requirements for 60 days and Planned order for the requirements beyond 60 days.
Appreciate your response and will be happy if you can suggest for the 45 days error also.
with best regards
Similar Messages
-
How can I generate automatic inspection lots every 15th day
Hello,
My client receives chemicals (Raw Mat) every day. Incoming inspn is done only for physical spec and Usage deciison is taken on same day itself.
As he is getting raw mat from good vendors, he usally do chemical analysis every 15th day.
Whats the best way for me to map this process of generating inspection lot on every 15 day. initial incoming lot we cant use as he already taken UD on that.
15 day chemical analysis dont have any impact on qty posting as Raw mat usally will be consumed.
Is there anything other than manual lot. I welcome all ideas.In this case your looking at a pooled sample of the approx. 15 batches of material that were received in. Correct?
If you are batch managed, then no. Since the sample is a composite sample, you can't link it to anything else really and you don't have a batch number to enter into the inspection lot upon creation. First, you'd have to create a dummy batch to hold the results. Which you could do maybe by date if your system allows external batch numbering.
Then you could at least manually create the inspection lot.
The is no true "event" to trigger the creation of the inspection lot as there is when you do a GR. The only why you could trick the system would be if your were willing to maintain a separate storage location, and do a stock posting to it of the sample quantity each day. Then you could have an inspection plan that would create a skip lot each day. On the 15th day it would become required. You would probably utilize a copy of movement type 411 for this and use that custom one to make the moves.
The problem with this is then you'll have to write off that little bit of material at some point for accounting purposes.
Another option.. you could create dummy batch and set a 15 day inspection interval on it. Use deadline mointoring to create the lot one day in advance of expiration.
One more option: Use standard calibration inspection to set up a calibration program.. I.e. recalibate every 15 days.
Craig
Edited by: Craig Snyder on Mar 25, 2008 1:08 PM -
Cronjob to run in every 40 days
HI,
I want to schedule one cronjob to run once in every 40 days.
Please suggest what would be exact cronscript for this.
Thanks,
SaurabhYeah, an "at" job sitting out there running itself every 40 days isn't going to be easy to keep track of.
On Linux the "date" utility supports the "+%s" format, which is seconds since the epoch. Divide that by 86400 and you have days since the epoch. Something like this:
#!/bin/bash
now=`date "+%s"`
today=$(( $now / 86400 ))
rem=$(( $today % 40 ))Put that in a cron job, and if the remainder is whatever single value you pick, run your job. Else do nothing.
That will run every 40 days.
The "%s" format specification to the date utility is a non-POSIX extension, so it's not available on strictly POSIX-compliant systems. Though it's pretty trivial to write something in C that will emit the current time in seconds since epoch. Perl probably can be used, too. -
Solid amber flashes green once about every minute + even more problems
I have a problem with my airport express:
-Even after doing a factory reset my airport express has an solid amber light wich flashes green once about every minute.
- Sometimes the LED light even goes off for a couple of seconds.
- I can't find the airport express in the airport express utility, even when I directly connect a LAN cable it won't find it.
- I also can't find the airport express wirelessly.
Please help me fixing this airport express.Lauren, welcome to the discussions!
Unfortunately, the symptoms you are describing likely indicate that your Express has an internal problem and may need to be replaced.
If you have not already done so, try a Factory Default Reset to see if that might help.
Power down the Express and wait a few minutes.
Then hold in the reset button and keep holding it in as you plug the device back in to power
Keep holding the reset button until you see the amber light begin to blink more quickly. This normally takes about 5-10 seconds
See if that helps. If no luck, I'm afraid the Express has failed and will need to be replaced. -
How to use MRP for generate PO? any samlpe?
I want to know how to using the MRP for generate purchase order.
have any documents for showing the steps by using MRP?
Thanks.
OnMRP will generate Order Recommendation only, not actual PO. You may need to learn general knowledge about MRP first before actually run the MRP Wizard. Actually, if you have clear knowledge about what MRP covers, many steps have self explained well on the online help.
Thanks,
Gordon -
Generate AWR Report automatically every day
Hi Friends,
I would like to generate AWR Report automatically every day. How do i do it.
The Start Time will be 00:00 of Previous day and the end Time will be : 00:00 of current day. The File format is html.
Currently i am using awrrpt.sql to generate report manually and i would like to achieve it automatically,I am not sure how to pass the values of start and end time (From which table i can get the values)?
Regards,
DBHi, DB.
You may use the below sql script , the sql script generates the AWR report for the duration of 2 days in HTML.
So you change
1) the where condition as per your requirement,
2) report name in sql script,
3) and convert it as shell or bat script based on your environment, and schedule it in your OS job scheduler / crontab.
=-=-=-=-
connect / as sysdba
REM set termout off
variable snap1 number
variable snap2 number
COLUMN starthr new_value bhr
COLUMN endhr new_value ehr
COLUMN crdate new_value cdt
begin
select
distinct min(s.snap_id)
into :snap1
from dba_hist_snapshot s
where to_char(trunc(end_interval_time,'HH24'),'HH24') = to_char(trunc(sysdate,'HH24'),'HH24')-2 and trunc(end_interval_time)=trunc(sysdate);
select
distinct max(s.snap_id)
into :snap2
from dba_hist_snapshot s
where to_char(trunc(end_interval_time,'HH24'),'HH24') =to_char(trunc(sysdate,'HH24'),'HH24') and trunc(end_interval_time)=trunc(sysdate);
end;
COLUMN starthr new_value bhr
COLUMN endhr new_value ehr
COLUMN crdate new_value cdt
select to_char(trunc(sysdate, 'HH24'),'HH24')-2 starthr,
to_char(trunc(sysdate, 'HH24'),'HH24') endhr,
to_char(trunc(sysdate),'DD-MON-YYYY') crdate
from dual;
define begin_snap=:snap1
define end_snap=:snap2
define report_name=/orashare1/reports/awrreport/AWRRPT_PROD_1_${1^^}_${EXDATE}_mor.html
define report_type = 'html';
@@?/rdbms/admin/awrrpt.sql
exit -
Airport Express and Extreme both having timeout issues once every few days.
I have both an Airport Express and an Airport Extreme in the house (one on each side of the house), and for the last few months, we have been experiencing timeout issues with both. About once every few days, my computer (or any other computer here - all Macs) will lose connection to the hub. When I try to reconnect in the Wifi menu, it says "Connection timed out". Also, on my iPhone, when I try to connect, it says "Unable to connect".
All this takes is a quick restart of the Airport (just pull the power out and plug in), but this is VERY frustrating. I've updated to the latest firmware... I'm not sure what else to do.
Any ideas?Ok, thanks for clarifying that for me. I suggest starting by reviewing the following AirPort User Tip around the details for best base station placement. Let's see if this will help increase the bandwidth performance of your extended network. Most likely, due to combination of distance and Wi-Fi interference, you may not be getting the best bandwidth possible. Please post back your results.
-
WLC 4402 - only present guest with web auth page once every (x) days
Hi all,
I am looking to migrate our guest wireless from a third-party system to the WLC. Currently, we change our guest password (WPA2 PSK) every (x) days. Each time the guest password is changed and connections are made with the new PSK, guests are redirected to a terms and conditions page which they must accept. The MAC address is then cached and the page is not displayed again until we clear the MAC cache and change the PSK.
I can almost replicate this with web auth in passthrough mode on the WLC, but it presents the guest with the terms and conditions page each time they reconnect to the WLAN, whether it be from roaming offsite or turning the wireless radio off then on.
Is there any way to have the WLC replicate our current system, where a MAC is cached and the page is not displayed until some other event takes place (changing the PSK or clearing the cache?)
Thanks!
-PWait ... Shaoqin, will the 7.5 code be released for the 4400 series controllers? The current release is 7.0.240.0 - I see releases up to 7.4 on the 5500 series controllers
Thanks
-P -
I have purchased an album and its on my computer in library, plays there and on Ipod as downloaded but cant get it in to music. also havent been able to get my music that I download into hard drive to sync either, afraid to restore [reset] because with have to re-download all of my cd s again. HELP
It means exactly what it says. For redownloading via iCloud (which is what you are doing).
Computers and devices can be associated with a different Apple ID once every 90 days. Days remaining indicates the number of days before you can associate that specific computer or device with a different Apple ID. -
Why when I try to download songs onto my iPhone from my iPad, it pops up and says "This device is already associated with an Apple ID, You can download past purchases on this device with just one Apple ID every 90 days. You cannot associate this device with a different Apple ID for 90 days
(Note, mine says 28 days because I have been waiting for a fair bit for this to go away.)You can't keep changing the ID you use with iTunes, you are limited to once every 90 days.
-
HT204074 Why can only ONE Apple ID be associated with a computer every 90 days?
We have 3 family members who all sync our iPhones/iPads/iPods to the same computer. My son can't access and download past purchases from his iTunes acct to our computer, because it says ONLY ONE Apple ID can be associated with the computer every 90 days, and I just downloaded a movie this week from my own account. Now, my son has to wait 90 days to access his own purchases. I feel I should have access to my purchases any time I want, as should my son and any other family members who use this computer. The number of devices authorized to access iTunes Store purchases is already set to five (which we do not exceed) so, why this additional restriction? I don't understand why Apple would restrict me from accessing our own purchases.
This bothers me so much. It is absolutely ridiculous. I use my Apple ID as well as a family member's Apple ID to download music.
Every once in a while I will purchase a song and it won't download correctly or will give me an error that my computer is not authorized, a solution I usually fix by deleting and redownloading the song from the cloud. This doesn't work, however, when it happens to both accounts within 90 days.
It is incredibly frustrating to me that I have paid for a song, it downloaded incorrectly, and I must wait 90 days to try downloading it again because of these assinine policies. -
What is going on with my apple ID. I only have one, the iMac is only associated with this ID, yet i get this message after evry thing i try to download from the store......You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 88 days.
Hello BW1968,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days.
Best of luck,
Mario -
I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails. My MBP has not seen a problem at all.
I have been searching every other day for over a month trying to find a fix in Windows Safari with no joy. I want to resolve, not switch browsers. Please offer up a solution that only refreshes the Top Site thumbnails once a day or as some controlable interval. Started about two versions ago, now on ver 5.1.5. Windows 7 64bit.
Safari 5.1.5 for Win64 bit, Windows 7!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
the funny behaviour of the trackpad/cursor still persists. any suggestion???
thanks again -
Smtp in Hangs for every fews days.
I am running iPlanet Messaging Server 5.2 sp1 on solaris 2.8 with kernel patch level 23 .
For every few days say for 3-4 days once smtp process stops hanging. When I do a telnet to port 25 , it just stop as "Escape character is '^]'." It is not displaying the iMS banner.
If a do a restart of services , it is ready to accept the requests.
imsimta version o/p
iPlanet Messaging Server 5.2 Patch 1 (built Aug 19 2002)
libimta.so 5.2 Patch 1 (built 23:25:07, Aug 19 2002)
Please help.
Rgds
Prem.Hi
Please find below the truss o/p of tcp_smtp_server & dispatcher process ..
tcp_smtp_process:
lwp_sema_wait(0xFE0C1E30) (sleeping...)
signotifywait() (sleeping...)
lwp_sema_wait(0xFE111E30) (sleeping...)
poll(0xFE0F01C0, 1, -1) (sleeping...)
lwp_sema_wait(0xFE33FA08) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE33FA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFE0C1E30) = 0
lwp_sema_wait(0xFE0C1E30) = 0
sigprocmask(SIG_SETMASK, 0xFE34AD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE33F9F8, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE33F9F8, 0x00000000) = 0
time() = 1072237388
lwp_sema_post(0xFE33FA08) = 0
lwp_sema_wait(0xFE33FA08) = 0
sigprocmask(SIG_BLOCK, 0xFE33F9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE33F9F8, 0x00000000) = 0
lwp_sema_wait(0xFE0C1E30) (sleeping...)
signotifywait() (sleeping...)
lwp_sema_wait(0xFE111E30) (sleeping...)
poll(0xFE0F01C0, 1, -1) (sleeping...)
lwp_sema_wait(0xFE33FA08) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE33FA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFE0C1E30) = 0
lwp_sema_wait(0xFE0C1E30) = 0
sigprocmask(SIG_SETMASK, 0xFE34AD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE33F9F8, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE33F9F8, 0x00000000) = 0
time() = 1072237448
lwp_sema_post(0xFE33FA08) = 0
lwp_sema_wait(0xFE33FA08) = 0
sigprocmask(SIG_BLOCK, 0xFE33F9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE33F9F8, 0x00000000) = 0
lwp_sema_wait(0xFE0C1E30) (sleeping...)
signotifywait() (sleeping...)
lwp_sema_wait(0xFE111E30) (sleeping...)
poll(0xFE0F01C0, 1, -1) (sleeping...)
lwp_sema_wait(0xFE33FA08) (sleeping...)
Dispatcher Process
*** SGID: rgid/egid/sgid = 10 / 1 / 1 ***
accept(13, 0xFE031CE8, 0xFE031CD4, 1) (sleeping...)
signotifywait() (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
accept(9, 0xFE0F1C9E, 0xFE0F1C98, 1) (sleeping...)
lwp_sema_wait(0xFE7EFA08) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_sema_wait(0xFDF0DE30) (sleeping...)
poll(0xFD530250, 1, -1) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFDF0DE30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFDF0DE30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
fork1() = 12612
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
mmap(0x00000000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFD7E0000
mprotect(0xFD7E0000, 8192, PROT_NONE) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_self() = 9
lwp_sema_post(0xFD7F1E30) = 0
lwp_sema_wait(0xFD7F1E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
time() = 1072237298
lwp_sema_post(0xFD7F1E30) = 0
lwp_sema_wait(0xFD7F1E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_wakeup(0xFE7FB1D8) = 0
lwp_mutex_lock(0xFE7FB1D8) = 0
lwp_cond_broadcast(0xFE7FB210) = 0
munmap(0xFE040000, 73728) = 0
accept(13, 0xFE031CE8, 0xFE031CD4, 1) (sleeping...)
signotifywait() (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
accept(9, 0xFE0F1C9E, 0xFE0F1C98, 1) (sleeping...)
lwp_sema_wait(0xFE7EFA08) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_sema_wait(0xFDF0DE30) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
poll(0xFD530250, 1, -1) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFDF0DE30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFDF0DE30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
time() = 1072237327
time() = 1072237327
time() = 1072237327
time() = 1072237327
time() = 1072237327
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFE111E30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFE111E30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
fork1() = 12666
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
mmap(0x00000000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFE040000
mprotect(0xFE040000, 8192, PROT_NONE) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_self() = 10
lwp_sema_post(0xFE051E30) = 0
lwp_sema_wait(0xFE051E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
time() = 1072237328
lwp_sema_post(0xFE7EFA08) = 0
lwp_sema_wait(0xFE7EFA08) = 0
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
lwp_sema_post(0xFE051E30) = 0
lwp_sema_wait(0xFE051E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_wakeup(0xFE7FB1D8) = 0
lwp_mutex_lock(0xFE7FB1D8) = 0
lwp_cond_broadcast(0xFE7FB210) = 0
munmap(0xFD7E0000, 73728) = 0
accept(13, 0xFE031CE8, 0xFE031CD4, 1) (sleeping...)
signotifywait() (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
accept(9, 0xFE0F1C9E, 0xFE0F1C98, 1) (sleeping...)
lwp_sema_wait(0xFE7EFA08) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_sema_wait(0xFDF0DE30) (sleeping...)
poll(0xFD530250, 1, -1) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFDF0DE30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFDF0DE30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
fork1() = 12673
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
mmap(0x00000000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFD7E0000
mprotect(0xFD7E0000, 8192, PROT_NONE) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_self() = 9
lwp_sema_post(0xFD7F1E30) = 0
lwp_sema_wait(0xFD7F1E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
time() = 1072237358
lwp_sema_post(0xFD7F1E30) = 0
lwp_sema_wait(0xFD7F1E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_wakeup(0xFE7FB1D8) = 0
lwp_mutex_lock(0xFE7FB1D8) = 0
lwp_cond_broadcast(0xFE7FB210) = 0
munmap(0xFE040000, 73728) = 0
accept(13, 0xFE031CE8, 0xFE031CD4, 1) (sleeping...)
signotifywait() (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
accept(9, 0xFE0F1C9E, 0xFE0F1C98, 1) (sleeping...)
lwp_sema_wait(0xFE7EFA08) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_sema_wait(0xFDF0DE30) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
poll(0xFD530250, 1, -1) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFDF0DE30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFDF0DE30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
time() = 1072237387
time() = 1072237387
time() = 1072237387
time() = 1072237387
time() = 1072237387
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFE111E30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFE111E30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
fork1() = 12680
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
mmap(0x00000000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFE040000
mprotect(0xFE040000, 8192, PROT_NONE) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_self() = 10
lwp_sema_post(0xFE051E30) = 0
lwp_sema_wait(0xFE051E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
time() = 1072237388
lwp_sema_post(0xFE7EFA08) = 0
lwp_sema_wait(0xFE7EFA08) = 0
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
lwp_sema_post(0xFE051E30) = 0
lwp_sema_wait(0xFE051E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_wakeup(0xFE7FB1D8) = 0
lwp_mutex_lock(0xFE7FB1D8) = 0
lwp_cond_broadcast(0xFE7FB210) = 0
munmap(0xFD7E0000, 73728) = 0
accept(13, 0xFE031CE8, 0xFE031CD4, 1) (sleeping...)
signotifywait() (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
accept(9, 0xFE0F1C9E, 0xFE0F1C98, 1) (sleeping...)
lwp_sema_wait(0xFE7EFA08) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_sema_wait(0xFDF0DE30) (sleeping...)
poll(0xFD530250, 1, -1) (sleeping...) -
Both Photoshop and Lightroom exhibit the same error. Sometimes this happens 3 times in one day or perhaps every third day. When I open either package I get a message saying that I have 00 days left in the trial and to continue I need to purchase a licence or start a trail. If I click on purchase a Licence the once I log in with Adobe ID I can get started. I have contacted Adobe chat support 6 times. They suggest deleting an opm.db file and assure me that this will sort the problem and within 24 hours back to square one
Here it happens only with photoshop cc 2014. i just deleped opm.db i will check again tomorrow.
Maybe you are looking for
-
HT202213 can I use home sharing to watch a movie rented on my apple tv?
I have started a rented movie on my apple tv. I would like to watch the rest from my mac using itunes can I do this?
-
Smartforms - delete old variables - looking for a real expert
Hi folks, Is there any possibility in Smartforms, that I don't know, with which I can analyse my fom. I want to check which variables aren't needed any more. So that I can delete them and I have a nice and clean form. How I loved my analyse tool in s
-
Summary Can't print PDF files from Adobe Acrobat Pro 9.3.0 on Mac OS X Snow Leopard (10.6.2) to Brother MFC-7820N Printer (connected via USB). Print queue consistently shows "pstopdffilter/pstocupsraster failed with err number 13". Steps to reproduc
-
About abstract method read() in class InputStream
I would like to know if behind the method public abstract int read() throws IOException in the abstract class InputStream there is some code that is called when I have to read a stream. In this case where can I find something about this code and, if
-
DNG files display artifacts in Lightroom but not in Camera Raw
I've been scratching my head over this one for a few days so hopefully someone here can help. Some of my dng images are showing artifacts in Lightroom 3, see attached file as an example. However, if I open these images in Camera Raw 5.7 the artifac