MS-6389M need manual and drivers

Just received new motherboard (purchased mail order)
NEED MANUAL AND DRIVERS.
This motherboard MS6389M is not listed on MSI website (anyhow, I couldn't find it)
I dont know if this is a new product, and not on site yet, or if it is an old discontinued product. This is the very first motherboard I have ever purchased that did not have manual and drivers packaged with it, and I have purchased MANY.

This board is killing me as well....
I can not find anything on it except for the only gateway page that referances it in" http://support.gateway.com/support/manlib/cmponts/sysboard/8507869/07869.htm "
this is just a quick referance for it (it does have jumper settings and such)
I have gone to www.esupport.com to get an updated bios for it (but no reply from them so far)
But please reply if you are interested in a bios update for it.

Similar Messages

Equium A100 PSAAQE: need tools and drivers

I am new to this forum, and I think this thread is fairly close to my problem.
I recently bought an Equium A100-33888 laptop notebook, Model PSAAQE.
As it was secondhand, the dealer reformatted the disc - installing, as the original, Vista Home Premium.
But he has cleared (removed) as far as I can see, the Toshiba special utilities as described in the manual. That is, there are no folders/files named toshiba.
(I also have a rather older toshiba laptop, which does have some folders/files named toshiba - including help files for the utilities.)
I gather from a quick look throuh the form that there may be what seems to be described as a driver download which might enable me to restore these utilities. Can someone please advise me as to exactly which driver would be appropriate, and where to find it?
I certainly do not want to lose (reinstall) all the programs I have installed on this laptop, and would rather do without the utilities.
I assume and hope that the general hotkeys (Fn + hotkey) all work without the utilities.
Please advise me on both questions.
Thanks.

Hi
I assume you need drivers and tools for Vista. Right?
Toshiba European driver page provides all drivers and tools as you can see on the screenshot below:
http://eu.computers.toshiba-europe.com
<img src='http://img209.imageshack.us/img209/448/capturebs.jpg' border='0' width='550px'/>

Software and drivers for media smart server EX 475 win 8.1

Had to replace my laptop and is now running win 8.1 (64 bit). I need software and drivers for my mediasmart server EX 475 (GG 795 AA)

I'd say go with Middleton BIOS either way (SATA II). In which case, get a newfangled 802.11ac card while you're at it.

My iphone 5 clock is not working properly. I've tried to reset it, and update the clock automatically and manually, and the time is still off. My alarms aren't working because of this, and I need my phone to work properly.

My iphone 5 clock is not working properly. I've tried to reset it, and update the clock automatically and manually, and the time is still off. My alarms aren't working because of this, and I need my phone to work properly.

Automatic time is a function of your Wireless carrier. Your post indicates that your iPhone (5 or 5c) is running iOS 7.0.6. The current version is 7.1.1. You might try updating your device to the current iOS version.
HTH

Tecra M2 PTM20A-002T2 - Need ethernet and display drivers

Please help me with an answer!
I have spent hours chasing files and installing different stuff.
Got my sound working but still need ethernet and display drivers I think.
I am online for about 15 minutes and back on tonight.
Thanks, Nay,
Melbourne, Australia

Hi Nay,
Alternative have a look on the Toshiba European page. There I founded a similar model, Tecra M2 PTM20E, and I think the downloads should also work for your model:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Furthermore you can see an installation instructions document for Windows XP. Its a list for the recommend driver installation order, tested by Toshiba. :)
Last but not least you can identify the hardware using hardware and vendor ID. Therefore check this article:
[How to identify an unknown device (e.g. Wireless LAN module)?|http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm]

I have a Dell monitor ST2210, which I want to connect to my new Macbookair, what software and drivers do I need to use?

I have a Dell monitor ST2210, which I want to connect to my new Macbookair, what software and drivers do I need to use?

Mar14Apple,
which resolution are you using when you use your monitor? Is that resolution supported through the monitor’s VGA port? (You’d probably have better throughput by using an adapter for the HDMI port or DVI port instead.) When you say that the trackpad doesn’t work, does that mean that the cursor is not visible on the monitor, or that it physically does not work, such that clicks are not registered, &c.?

Deactivate transfer requirement and need manual transfer requirement

hi friends
our bussiness requirement is need manual transfer requirement orders .but when i do grn for raw materials system is automatic generate the transfer requirement numbers.my request is i want do manual transfer requirement with reference to material documnet.
pls help for this issue
with regards
dinesh
Edited by: code acess on Oct 28, 2010 8:36 AM

Transaction code : OMLR
Please deactivate TR creation against the movement type 101 and required movement indocator (B for PO) and also for combination of movement indicator and the Special stock indicator based on your reuirement.
Path
Spro --> Logistic execution --> warehouse management --> Interfaces > inventory managemnet> define movement types --> select LE-WM Interface to Inventory Management .
warm regards
Ramakrishna

Need to download Tools and Drivers CD v1.7.0

All,
I have a Sun Server x2100 and I am trying to load W2k3 on the server. I am looking for the TOOLS and DRIVERS CD v1.7.0* Does any one know were I can download the ISO in Oracle? Please Help.
Thanks in advance,
Ben

Hi.
It avaliable on support.oracle.com ( patches and update) but require valid support contract for access.
Regards.

Need 64-bit software and drivers

Can someone please help me locate the software and drivers for my printer. The CD that came with the printer does not have drivers for Windows 7 64-bit operating system.

Hi , Welcome to the HP Forums! I understand that you are looking for drivers for Windows 7 (64-bit) for your HP Photosmart P1000 printer. I am happy to take a look for you! According to the HP Photosmart p1000/1000 Printer Drivers website, The newest driver available for this printer is for Windows XP 32 bit. The system requirements for this printer also specify only these Windows Operating Systems: Microsoft (R) Windows 95, 98, Me, NT 4.0, 2000 Professional, XP. You might be able to use the Windows XP driver in compatibility mode. Or, as another workaround, you might be able to use an alternate driver, by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by . (These methods are not guaranteed to work.) If they do not help, I would consider upgrading your printer to one that is supported for Windows 7. Printers Supported in Windows 7. As this printer is not officially supported. Hope this answers your question, and thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”

Needed Recovery CD and drivers for my Satellite L850-B148

Where can I Get a recovery and drivers cd for my Toshiba Satellite L850-B148?
Recently, I had my motherboard and HDD replaced and win7 freshly installed. But unfortunately, I could not find the CD that came with the laptop. Can you help?

Hello
As I can see doc has already posted the links for drivers download. If you don't have recovery disc for recovery image installation you can install own OS version using Microsoft installation disc. All necessary drivers, tools and utilities you can download from Toshiba download page. Of course you must install them one by one.
In this case your preinstalled OS will not be activated as original recovery image so you must buy valid licence code (product key).
In my opinion best solution for you is to order original recovery installation disc. I don't know where do you live but I hope the link posted by doc will work for you.
Using recovery installation disc the whole package will be installed and when finished it is not necessary to install anything. OS, drivers and all necessary tools and utilities will be installed and configured properly.

Windows 7 and drivers question

Like may people I have recently upgraded to Windows 7 64-bit from Vista 32-bit. When installing I used the optional update listed in Windows update?for Sound Blaster drivers, these were installed and the sound is working fine.
After a few days getting Windows 7 set up the way I wanted I decided to?find and install the extra?programs from Creative like Alchemy and the sound utilities. The problem is Creatives auto update is broken as posted on these forums?by a lot of other Sound Blaster users. My sound card was installed when I bought the card so I don't have the serial number or model number and I'm unwilling to take the machine apart to find these numbers.
My problem is that I'm sure my card is the PCI-Express Sound Blaster?X-Fi Xtreme Audio as the DVD installation disk I received with the computer shows a diagram of the card, I'm also pretty sure Vista Device Manager reported it as such. Windows 7 's Device Manager however reports it as just the Sound Blaster?X-Fi Xtreme Audio. While trying to find software and drivers manually on Creatives site there are separate drivers for these two cards, the PCI-Express one is version .0.4.0000 dated 30 June 09?and the other is .0.4.0090 dated 2 July 09. Neither of these drivers relate to the driver in Device Manager which Windows reports as version 6.0.0.209 dated 27 August 09. I tried installing the PCI-Express driver .0.4.0000 as they seemed to be the?appropriate drivers but windows reported them as older than the ones installed so I cancelled the installation.
Can anyone advise me on which is the right driver? There seem to be 3 different ones discounting the Beta ones on Creatives site. Creative auto update can't advise me as it's broken, I can't contact Creative directly because I don't have my serial number at hand, why don't they have a tool for checking serial numbers electronically? Non retail Sound Blaster owners have to strip their computers to find stickers on the circuit board as they didn't fit the card themselves!
Can someone also advise me if Alchemy and all?the sound utilities work with Windows 7 64-bit's when I select Windows 7 64-bit as the OS the download list removes everything but the drivers.

sorry for the questions, i did what u wrote but appear the same 5.
- Boot Camp Support Software 4.0.4131
of 664.08 MB
- Boot Camp Support Software 4.0.4255
of 1 GB
- Boot Camp Support Software 4.0.4326
of 894.44 MB
- Boot Camp Support Software 4.0.4033
of 601.76 MB
- Boot Camp Support Software 4.1.4586
of 414.74 MB
dont know wich of, these do i have to download, what i need to know to choose the correct??

HT2305 I have a new computer with Windows 8 OS. Do I need to install drivers so that my Ipod Nano will sync with this new computer:

My daughter gave me a new Ipod (Nano) for Christmas. I had no problem download my songs from my old Ipod (Shuffle) to the new one. However - since I do not buy songs on a regular basis, I did not buy a new song until 4/29/13. Now for information...sometime in March my old laptop died, completely. I had to go buy a new one - which I did and this new one has Windows 8 Operating System on it (which I hate, btw).
Now, when I bout a song on Tuesday, the song did not go to my new Ipod. I tried everything and finally had to talk to a tech - who was very kind in helping me and we did get all my songs from Itunes to this new computer. I thought the song I bought would then go on the Ipod - but it did not. I had already hung up from the tech - since we had been talking on the phone for about an hour. He informed me that he was giving me a "courtesy break" because it has been over 90 days since my new Ipod was purchased ---- just my darn luck!
Anyway, I have figured out on my own that the new Ipod Nano is not synced with the new laptop with Windows 8. I have been trying for the last 2 hours to get it to do so and in doing so, found out that Windows 8 is not mentioned in any of the help forums. So...my question is: Do I need to install drivers on the computer or what? I will not be purchasing anymore music from Itunes until I get this matter resolved. Any help will be apreciated. Thank you.
Judy1942

Try http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1165/187/how-do-i- move-my-catalog-photos-and-other-lightroom-files-to-a-new-computer

Printer CD will not install software and drivers

Laptop: Acer Aspire 3690 series
Model: BL50
OS: Windows Vista SP2 Home Basic (32 bit)
Printer: HP Desktop F4100 series
*To my knowledge both laptop and printer are old models, with the laptop being as old as 7 years.
Short Story: After formatting my laptop and reinstalling the OS, the CD won't install the drivers from the disc so the printer would work correctly on my computer. It always results in an error.
Long Story: My Windows Vista laptop had an issue. There was a problem with the OS that kept mysteriously eating up space of the computer hard drive. It was so bad that the computer kept reporting it had 0 bytes of free space left on the hard drive. I always had to find free up space somehow because the printer won't print without free space. I couldn't even use my superiorly better computer because the printer only works with Windows 2000, XP and Vista, it doesn't work with Windows 7 (I tried). One day I decided I had enough of it and reinstalled the OS of the laptop. I used DriverMax and exported all of the drivers from my laptop to my flash drive since I don't remember my laptop coming with a driver disc. Everything went smooth and my laptop was operating like new except for one issue: No matter how many times I tried, I could not install the printer drivers from the printer disc onto the computer.
When the disc is installing the drivers and software, this would show:
and then this error:
I wasn't sure if I there was a model number on the printer or not but here is a photo of it:
Getting help from the HP Support forum seems to be my only option so hopefully I can find a solution here. Thank you to anyone in advance who can help me resolve this I would really like to get this fix as I not too long ago bought several cartridges for this printer to last a while, and there's not much money to buy a printer OR another computer.
This question was solved.
View Solution.

Greg-HP
Welcome to the HP Community Forum.
The printer software for your OS may be available for download from the printer's Support pages.
Install Full Feature Software – Printer
Should it be available, be sure you do save a copy of the software, the manuals, and whatever else you find that you find of interest. One never knows when these vintage items might disappear. Smiling.
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

TS3992 I am unable to back up my ipod touch, I try and do it manually and it sits "Backing Up........." for a very long time, I have had it running all day and still going????? I am on the 5GB free plan, I have availabe 2.3GB

I am unable to back up my ipod touch, I try and do it manually and it sits on "Backing Up.........", it has been sitting on this all day. I am on the free 5GB plan, availabe storage is 2.3GB, any suggestions

Hello mig04,
While looking into the issue you are experiencing I came across some helpful information. In an article called iCloud: Troubleshooting creating backups found here: http://support.apple.com/kb/TS3992 there are a number of steps to help get your issue resolved.
General troubleshooting
General information
iCloud Backup requires a Wi-Fi connection to the Internet.
Automatic backups occur when you've plugged in your iOS device, locked the screen, and have connected it to Wi-Fi.
You can manually start a backup by tapping Back Up Now in Settings > iCloud > Storage & Backup (requires a Wi-Fi connection to the Internet).
iCloud Backup will provide helpful information and status messages related to backups at the bottom ofSettings > iCloud > Storage & Backup.
If automatic backups don't work as expected, test to see what happens when you start a manual backup by tapping Back Up Now at the bottom of the Storage & Backup screen.
Backups and restores both take time, especially if you have a lot of data or a slow connection. Depending on the size of your data and the speed of your network, you may need to give more time than you expected to a backup or restore.
Make sure you have at least 50 MB of free space available on your iOS device before you back up. If you have no space available on your device, iCloud Backup can fail in some cases. You can verify how much free space you have available on your iOS device in Settings > General > About.
Cheers,
Sterling

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that informat

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that information is not sufficiently detailed for me. I have tried several options, but I come now way. Generally it seems that your information is only for the ones who can, not for the people who can´t although it is we who really need to learn. Please give me a step by step (click by click) information on how I can get the ice above the flower and then make the ice partly transparent so the flower is seen underneath. Please send me an e-mail Erik Solbu [email protected]

Open a new document big enough for your image. Then additional open your ice and flower image as well. Copy each and paste it into your blank document. They will be placed on their own separate layers.
Make sure in your layers panel. (Bottom right) the ice is above the flower, by dragging it in place. In that same layers panel click the ice layer to select in and find the opacity meter above. Drag to the left until you get the effect you desire.

MS-6389M need manual and drivers

Similar Messages

Maybe you are looking for