MS word - flashpaper causes crash

I used to be able to print fine to flashpaper, creating
pdf's. but suddenly when i use flashpaper it causes the ms word
program to crash. any help?

Noticed the same problem today when I tried to convert a word
2007 doc into pdf using Flashpaper - caused Word 2007 to 'not
respond' and crash. Would wait it out, even waited an hour and
still nothing. It has worked fine in Word 2007 before, but that was
on my old computer running WinXP, this new notebook I am on that
this happened was running Vista.
For now I would just use PDF995. It is free and does the same
thing until this gets fixed - which I hope a patch does.
http://www.pdf995.com/download.html

Similar Messages

  • Microsoft Word Report causes crash

    Hi all.
    I'm using the Report Generation toolkit to write some data to a MS Word file. On several computers here, this works just fine, both in development and as an executable.
    However, on two computers, I keep getting the following error.
    This is not exactly a LabView or National Instruments Error. It looks like a Windows error, but it's definitely being caused by my LV program.
    The software works well enough to open the Word file and display it, however, it fails on the next operation which is "Word Find & Replace.vi"
    I tried the solution suggested for the "Error 7" problem, but that did not fix it.
    (http://digital.ni.com/public.nsf/allkb/8A0E6274D9BD7B1986256F62006AD402?OpenDocument)
    I appreciate your help!

    Currently, I'm on one of the computers that crashes.  (We'll call her "Emily.")
    This is running Windows XP Pro. It does not have LabView installed, but it does sucessfully run a variety of LabView programs (compiled to .exe and installed via an installer.)
    We just updated the Windows .NET framework from 2.5 to 4.0 Extended, but this did not fix the problem.
    It has Microsoft Office 2007.
    The software the causes the crash is relatively simple.  It reads a data file, does a few calculations and then tries to write the results to a Word file using search and replace.  It opens and displays the Word file just fine, but crashes when trying to do the search and replace.
    The error creates a .dmp file and an error log.   The .dmp file is attached, but I don't know what format it is in. (I had to change the extension to .txt to get it to upload, but it should be .dmp)
    I really appreciate any help.
    Here is the error log:
    #Date: Thu, Sep 13, 2012 1:05:19 PM
    #OSName: Microsoft Windows XP Service Pack 3
    #OSVers: 5.1
    #OSBuild: 2600
    #AppName: 11182R01
    #Version: 11.0.1 32-bit
    #AppKind: AppLib
    #AppModDate: 08/16/2012 21:05 GMT
    #LabVIEW Base Address: 0x30000000
    9/13/2012 1:05:44.234 PM
    Crash 0x0: Crash caught by NIER
    File Unknown(0) : Crash: Crash caught by NIER
    minidump id: 1ec6df86-26e4-4cc0-8a93-c2c070d1e7ab
    ExceptionCode: 0xC0000005„N
    0x3072DE84 - lvrt <unknown> + 0
    0x3072E238 - lvrt <unknown> + 0
    0x7C37FDB4 - MSVCR71 <unknown> + 0
    0x7C83AB50 - kernel32 <unknown> + 0
    0x00000000 - 11182R01 <unknown> + 0
    Attachments:
    1ec6df86-26e4-4cc0-8a93-c2c070d1e7ab.txt ‏49 KB
    1ec6df86-26e4-4cc0-8a93-c2c070d1e7ab.txt ‏49 KB

  • Ever since I downloaded Acrobat Pro 11.0.09, the PDF Maker and Save As PDF have not worked, but instead cause MS Word 2013 to crash.

         Ever since I downloaded the Acrobat Pro 11.0.09, the PDF Maker has not worked, but instead causes MS Word 2013 to crash. I cannot find the cause or the solution.
    forumnotifier

    OK I will try to elaborate this time with pictures so it is clear what I am asking and what the issue I am facing is.
    The specific option I want to be able to use from within the Adobe Acrobat Pro user interface is
    File\Create\Batch Create Multiple Files
    When I select that menu item a floating tool bar thing pops up that I can drag and drop files onto.
    If I drag excel or powerpoint documents onto it and press OK it converts them fine.  If I drag MS word documents into it the documents appear in the list but when I click OK it says no files processed.
    In the process of troubleshooting I also tried using the Add Files button.  That is when I discovered that MS word documents (*.doc, *.docx) are not showing up in the list of supported file types.
    The same thing happens when I try converting a single file using the File\Create\Create PDF From File menu item. Just like above the MS word documents do not show up in the list of supported file types.
    Looking in my registry entries as suggested by the article linked to by one of the posters above I can see both *.doc and *.docx types registered in the correct place.
    Unless I can use the batch convert command as intended by the time my trial period runs out in 13 days I cannot justify buying this software. If converting the documents one at a time was acceptable I would just use Save As PDF from within MS Word which works just fine. I need the batch convert function so I can convert my whole library of word documents to PDF at once.
    Any further assistance greatly appreciated!
    Regards,
    Gray

  • Photoshop CS4 and graphic cards. Can cause crashing?

    Since upgrading to CS4 I seem to have increased crashing.
    Here are my system specs.
    Mac 2 x 2.66 GHz Dual-Core Intel Xeon
    9 GB of Ram
    250 GB internal dedicated scratch disc
    NVDIA GeForce 7300 GT with 256 VRAM
    After having endless techs look at my machine and upgrading everything. I am beginning to suspect the graphics card.
    With OpenGL can a underperforming video card cause crashing in photoshop especially with massive file sizes ( multilayered CMYK poster sized files the can exceed 7 GB)?

    Did you install the 11.0.1 update?
    Is your OS up to date with patches?
    Have you tried disabling OpenGL in preferences to avoid using the GPU/Graphics card?

  • How do I reinstall MS Word on MacPro.  WORD keeps causing my computer to freeze.

    How do I reinstall Microsoft WORD on my MacPro.  (WORD keeps causing my computer to freeze.)

    So, in other words, you got a folder like this in your Applications folder:
    And the Mac freezes when you double-click on these:

  • AutoVue viewer caused crash while viewing .XSLX documents.

    We use AutoVue Desktop Deployment Viewer incorporated in our application (using JNI). When viewing XLSX (Microsoft Excel) documents on Windows 8.1 x64 system it caused crash of application. It's reproducible only on Windows 8 (8.1 or Server2012) systems. If we set compatibility mode (Windows 7) then problem isn't reproducible.

    I would recommend you log a ticket with customer support

  • CC 2014 (18.1.0) | Text Field editing causing crashes (Windows)

    Greetings;
    I've noticed lately that when saving files from CC 2014 to a CS6 format - and having those files edited on Mac, in either CS6 or CC - when re-opening those files text fields have been causing crashes on the Windows client. When that same file is opened and text fields are edited on the Mac client, a prompt will just appear stating "Cannot Edit text" - yet it still allows it.
    This has caused multiple issues for our teams as it has created files we're starting to refer to as "mine fields" - as working with the .ai file is like playing Russian roulette with text fields, you never know which one is going to crash the file.
    I would love to work with a team member from Adobe to help find a resolution to the problem, and I'm willing to provide any additional details that might aid in that process.
    Thanks!

    Hello Pureweb,
    Please upload the crashdumps on some file sharing website say Dropbox and share the link with us by sending a mail to "[email protected]". We will analyze the dump and will suggest you the workaround appropriately.
    In parallel, please check that you do not have any 3rd Party plugins installed in it. Please try to remove them one-by-one and see which one causes the crashes or do reverse i.e. remove all the 3rd party plugins. Or Uninstall Ai and check at following location:
    C:\Program Files\Adobe\Adobe Illustrator CC 2014
    Please verify that nothing is left at above location on uninstalling Ai. Then try a fresh install and see if Ai works.
    Also, verify that you have the updated Wacom drivers on your system. This might be an issue with the 3rd party program as well. One of the user who was having a similar issue reported on the Ai forum that one of the 3rd party Stahl's ImageWorx DTG RIP - a program for printing to a Direct To Garment printer was causing the issue. So, you may check if the similar thing is not happening in your case.
    Regards,
    Dhirendra

  • Barn doors transition causes crash

    Dear Community,
    Applied barn doors transition to a project in CS4. Stored that project in 2010.
    Opened the project in CS6 CC - and barn doors caused crashes - so I cleaned off the old and applied replacement barn door transitions in CS6 CC.
    Once the wipe is applied - its fairly stable - sometime crashes sometimes doesn't.
    If I apply a broder colour to the wipe - all ok.
    If I then apply a border thickness - crash every time.
    System;
    Premiere Pro CS6 - 6.0.3 (001 (MC: 264587)) through cloud membership
    Updated and current
    Win 7 Pro - SP1 - 64 Bit
    Source footage SONY EX3 - .mp4 and still image .png's
    No error messages - just crash and need to restart PP CS6
    Try to apply colour and border to a barn door transition causes the error
    This worked before on the smae project when created in CS4
    Not running other software at the time
    NewBlueFX modules installed but not applied to this area of sequence
    i7 - 3.20GHz, 16GB RAM, SSD OS drive, 4 x drive RAID on LSI RAID card, - No I/O hardware
    I am using Are you using Mercury Playback Engine Acceleration and CUDA
    Problem occurs during normal edit - as soon as I start to adjust the barn doors wipe - I don't get to compression
    Thanks
    Dave

    Doies it help anyone that I just received this from the email address; [email protected];
    Hello,
    You have received this email because the content you posted below has been rejected by our moderators.
    Re: Barn doors transition causes crash
    posted Jun 5, 2013 5:15 PM  
    Since the original report earlier today - I now just have to put the timeline scrubber over the barn doors transition and PP CS6 closes without an error message and without saving. The unfortunate part here is there doesn't seem to be any record or log of the crashes to be able to disseminate whats going wrong.
      Barn doors worked in CS4 - and the only change in this project is the re-opening in CS6 CC."
    Question; Did I put something in there that was defammatory, rude, obnoxious, incorrect or un-helpful?
    If anyone here believes I did, I sincerely apologise for the need of moderators to have intervened... and for causing any offence.

  • Photoshop CC Content - Aware Move Tool causes crash

    Does anyone have any ideas why this is happening? Content Aware Move tool causes crash every time so far with tiff and jpegs and its getting frustrating!
    I have Windows 8.1 Pro with 8GB RAM
    NVIDIA GeForce GT 650M Graphics
    Photoshop CC 64 bit

    Thanks for the reply JJMack - I have to be honest, i'm not exactly sure what i'm looking for here!
    Source
    Adobe Photoshop CC 2014
    Summary
    Stopped working
    Date
    06/04/2015 09:45
    Status
    Report sent
    Description
    Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: Photoshop.exe
    Application Version: 15.2.2.310
    Application Timestamp: 5480338c
    Fault Module Name: FaceDetection.dll
    Fault Module Version: 2.2.6.32411
    Fault Module Timestamp: 52e12400
    Exception Code: c0000005
    Exception Offset: 000000000001704d
    OS Version: 6.3.9600.2.0.0.256.48
    Locale ID: 2057
    Additional Information 1: e87c
    Additional Information 2: e87c816cbb2acbf5e54624fc2b1f98cc
    Additional Information 3: 1879
    Additional Information 4: 1879b998534215d47b0a850e45784427
    Extra information about the problem
    Bucket ID: 2dac81db98a57fddf5997edfd40ba6eb (85993531415)

  • HT5704 Hi, Two recent updates for my iPhone have caused crashes (down the white lead via iTunes).I have "fixed" but not sure of the cause?

    Hi,
    Two recent updates for my iPhone have caused crashes (down the white lead) via iTunes.
    I have "fixed" but I don't know the cause?
    Each time the update does n't complete.
    The download does n't happen.
    The computer & internet connection are good.
    It is as if the Apple server does n't complete?
    The phone stays in recovery mode, until you reset and rebuild in iTunes.
    All software is up to date, but I can't find the cause
    ANY IDEAS?
    Regards,
    P.
    <Email Edited by Host>

    No error messages.
    It just fails to complete the download, so recovery mode is the next step.
    This can be over a period of eight hours or more!
    I have so many (original) Apple USB leads that I would n't know if I have been using the same one (if it was faulty).
    Does this sound like a "common" problem?

  • Word 2011 keeps crashing usually when I do ctrl-c/ctrl-v

    Hi, I'm on a 2014 MacBook Air with Yosemite.  Recently Word has been crashing constantly.  I'm noticing somewhat of a pattern, that it seems to happen mostly when I use the copy and paste shortcut (control c, control v), but it happens at other times, too.
    Very frustrating.  I can't get any work done!
    Below is the error report, if that's helpful. 
    My computer knowledge isn't great, but I'm willing to try something if you can explain the steps clearly for me.
    By the way, Word is up to date. 
    Thanks! 
    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXC_CRASH (SIGABRT)
    Date/Time: 2015-01-15 18:34:17 +0000
    Application Name: Microsoft Word
    Application Bundle ID: com.microsoft.Word
    Application Signature: MSWD
    Application Version: 14.4.7.141117
    Crashed Module Name: merp
    Crashed Module Version: 2.2.4.141117
    Crashed Module Offset: 0x00004422
    Blame Module Name: Microsoft Word
    Blame Module Version: 14.4.7.141117
    Blame Module Offset: 0x0150e034
    Application LCID: 1033
    Extra app info: Reg=en Loc=0x0409
    Crashed thread: 0

    No, I mean in Word. Does Word crash if you use Command-V instead of Control-V? Microsoft Word is one of the few Mac applications that uses Control-C as a keyboard shortcut for Copy.

  • Why Does 3D Reposse cause crashes and work so slow?

    Why Does 3D Reposse cause crashes and work so slow?   I get the pinwheel of death when I use this feature.  It works at a snails pace.  I liked the 3D Type effects in iIllustrator.  Why couldn't Adobe have added all the Reposse features to Illustrator instead of craming all these new features into Photoshop?
    They're worthless if the program needs an hour to process every selection.

    What are your OS specs, your Video Card and your Preferences > Performance settings?
    Why Does 3D Reposse cause crashes and work so slow?
    My guess would be because it has to create a whole bunch of polygons and your computer-set-up may be insufficient for the task.

  • Firefox causes crash when using Youtube explorer does not have the same effect

    firefox causes crash when using Youtube explorer does not have the same effect

    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Check and tell if its working.

  • Access violation (0xC0000005) cause crash

    Access violation (0xC0000005) cause crash. The crash report is as blow. It may be caused by the function IMAQ FillHole. How this function crash?
    Who knows why? Thank you!
    #Date: 2014年8月12日 14:21:51
    #OSName: Windows 7 Ultimate 
    #OSVers: 6.1
    #OSBuild: 7600
    #AppName: 
    #Version: 12.0 32-bit
    #AppKind: AppLib
    #AppModDate: 08/12/2014 06:17 GMT
    #LabVIEW Base Address: 0x30000000
    <LVExec>
    {"a":[
    "vi": "D\\VISION_SYSTEM\\build\\MyProgram.exe\\IMAQ FillHole",
    "ctx": "主应用程序实例",
    "type": "subVI"
    "vi": "D\\VISION_SYSTEM\\build\\MyProgram.exe\\ccd2表面2二值化.vi",
    "ctx": "主应用程序实例",
    "type": "subVI"
    </LVExec>
    <DEBUG_OUTPUT>
    2014/8/12 16:48:15.894
    Crash 0x0: Crash caught by NIER
    File Unknown(0) : Crash 0x0: Crash caught by NIER
    minidump id: 6e35643f-8ff2-49e6-bbde-98bac2ffa48a
    ExceptionCode: 0xC0000005$N
    </DEBUG_OUTPUT>
    0x307277B4 - lvrt <unknown> + 0
    0x30727B38 - lvrt <unknown> + 0
    0x7C37FDB4 - MSVCR71 <unknown> + 0
    0x77CA5A74 - ntdll <unknown> + 0
    0x77C8B3C8 - ntdll <unknown> + 0
    0x00000000 - <unknown> <unknown> + 0
    Solved!
    Go to Solution.
    Attachments:
    ccd2表面2二值化.vi ‏21 KB

    Hi,
    please stick with your original thread! Don't create double posts!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • HT6084 Since upgrading to OS X Mavericks I have not been able to work on any MS Word tracked changes documents (works fine if no tracked changes), as every time upon opening such a word file the word processor closes / crashes. What can be done in this ca

    Since upgrading to OS X Mavericks I have not been able to work on any MS Word tracked changes documents (works fine if no tracked changes or comments in the doc). Every time upon opening such a word file with tr.changes the word processor closes / crashes.
    What can be done in this case?

    I just discovered that by turning off in tracked changes balloons in Word preferences prevents the software from crashing, but from then on I need to use only the review pane.

Maybe you are looking for