MSDTC on Windows 2012 Standards edition

Hello Friends,
We have migrated our Prod server to Windows server 2012 Standards editions.
and enabled MSDTC but still getting below error
Error :-
1. The
MSDTC transaction manager was unable to pull the transaction from the source transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process, the two machines cannot find
each other by their NetBIOS names, or the support for network transactions is not enabled for one of the two transaction managers. (Exception from HRESULT: 0x8004D02B)
2. The
partner transaction manager has disabled its support for remote/network transactions. (Exception from HRESULT: 0x8004D025)
we have enabled MSDTC and restarted the server but it not working.
can you please help me.

Set also the Option "Enable XA Transactions"; a restart is not required. Click on "Learn more about setting these properties" to get the info about it:
Security Settings — Enable XA Transactions check box:
Select this check box to allow transactions that use the XA standard.
Resource managers that run on different operating systems can communicate with a
DTC transaction manager by using the XA standard.
XA interfaces are a standard set of programming interfaces that allow COM+
application developers to access XA-compliant databases and create resource
managers that operate with relational databases, message queuing, transactional
files, and object-oriented databases. Although Microsoft does not directly
support the XA protocol, Microsoft does support translation facilities between
OLE Transactions and XA.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Similar Messages

Exchange 2013 management tools installation on windows 2012 standard edition gives error.

Exchange 2013 management tools installation on windows 2012 standard edition gives following error.
Does anyone observed this issue ?
Error:
The Exchange management tools are supported on servers running Windows Server 2012 and Windows Server 2008 R2 SP1 or later, and also on Windows 8 and Windows 7 client computers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersionForAdminTools.aspx
My Test lab is having
Exchange 2013 installed (xyz.local) domain and working fine.
Now i am installing Exchange Management tools on server which is member of (xyz.local) Domain (base OS : Windows 2012 standard edition : Windows updated)
Best Regards
sameer Prabhune

Hi Sprabhune,
It should work.
Did you install the tool by GUI or cmd?
Please select "Automatically install Windows Server roles and features that are required to install Exchange Server" to have the Setup wizard install required Windows prerequisites.
If possible, please try to install the tool on Windows 7/8 client to test.
Exchange 2013 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354.aspx
Frank Wang
TechNet Community Support

Is it possible to install SQL Server 2012 Standard Edition on a Windows Server 2012 Standard Which is installed on a Virtual Machine that is created by Hyper-V?

Hi
I have recently bought a Virtual Machine from a data center and installed a Windows Server 2012 Standard Edition on it. As I tried to install the SQL Server 2012 Standard Edition, the data center administrator denied me to do this telling me it is not possible
to install any licensed Microsoft software on a Windows installed on virtual machine created by Hyper-V. It was really strange for me! I wanna know if this is true.
Thanks Everybody

Hi Farid,
For SQL server running on virtual server please refer to following article :
http://blogs.technet.com/b/peeyusht/archive/2010/03/19/sql-licensing-under-virtualization.aspx
In addition , for license issue we still recommend you to contact MS Activation Center:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

How to install device cals on Windows Server 2012 standard edition

Hello i have a windows server 2012 standard edition licence that i have taken on rent from an ISP.
i have created a domain controller on that.
By default only two users can use remote desktop to the server simultaneously.
My Requirement is 20 users can use remote desktop to the server at the same time.For that i have purchased 20 Delive CALs licences like volume licencing.
i have the licence number noted on the paper.
do i need to install remote desktop services first etc ?
Could anyone guide me step by step how can i install or configure so that 20 users can use remote desktop on the same time.

Hi,
Any update about the issue?
I would agree with others, you need to install Remote Desktop Services Client Access Licenses.
There are three methods by which you can install Remote Desktop Services client access licenses (RDS CALs) onto your license server:
• Install Remote Desktop Services Client Access Licenses Automatically
• Install Remote Desktop Services Client Access Licenses by Using a Web Browser
• Install Remote Desktop Services Client Access Licenses by Using the Telephone
https://technet.microsoft.com/en-us/library/cc725890.aspx?f=255&MSPPError=-2147217396
Then you can install both Per User and Per Device CALs onto the same license server.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Assign 2 of Windows Server 2012 Standard edition licensing question

I'm new at this and I have bought Windows 2012 Standard with 5 CALs back in January from Microsoft store on the Internet using as the host. There is Windows 2008 R2 installed as the virtual machine on the host. Few hours ago I have decided to buy another
license with 5 CALs to upgrade those even that I did need two license of Windows 2012 Standard anyway to support 4 physical processor as my server have quad core processor.
The question here that I need to ask is how do I assign 2 license of Windows Server 2012 Standard edition on the host to lift the limit and that up to 4 VMs will be allowed or does it automatically do that after upgrading to Windows 2012 Standard in
the virtual machine even that 5 CALs plus 5 CALs equal 10 CALs are done automatically?

Hello,
You have 2 questions here:
1. How can I stack multiple OS licence in order to have more virtualization rights (more VMs) running on that host?
2. How can I stack Windows CAL licence from OEM.
Answers are:
1. You only have to licence the original licence on the physical host. You can use the same license key for all 4 VMs or use 2 VM key from the first package and 2 VM keys from the second licence package you just bought.
There is nowhere to register those licence, except one by one inside the VM themselves.
You have to keep all licence document in case of control by Microsoft.
2. Windows CAL allows a user (or a computer) to connect to an unlimited number of Windows Server within your company network. You have 10 CAL so you can have up to 10 users or computers in your company that will connect to your servers (even if you have 1.000
servers)
There is nowhere to register those licence, except one by one inside the VM themselves.
You have to keep all licence document in case of control by Microsoft.
Regards
PS: The only licence that require maintenance and central registration are Remote Desktop Licences.
MCITP: Enterprise Messaging Administrator 2010 MCTS: Lync Server 2010, Configuring MCSE
That is what I thought as I was told before even seen licensing details except a direction of how to attach the second license and I had to make sure. Thank you

Windows server 2012 Standard Edition Licensing

We have SPLA aggrement with MS.
I know, can use two physical processors with Windows server 2012 Standard Edition.
If i am planning to install Windows server 2012 Standard Edition in a virtual environment, lets say it has four cores, then how many licenses we need to buy for this ? Is it like each core has been considered as an separate processor in virtual environment
for Windows server 2012 Standard Edition licensing ?
Thanks,
Amit.

We have SPLA aggrement with MS.
I know, can use two physical processors with Windows server 2012 Standard Edition.
If i am planning to install Windows server 2012 Standard Edition in a virtual environment, lets say it has four cores, then how many licenses we need to buy for this ? Is it like each core has been considered as an separate processor in virtual environment
for Windows server 2012 Standard Edition licensing ?
Note that some information will be different for SPLA (so, check the SPUR to ensure you are in correct compliance).
http://www.microsoft.com/licensing/licensing-options/spla-program.aspx
http://www.microsoftvolumelicensing.com/DocumentSearch.aspx?Mode=3&DocumentTypeId=2
(if the information provided, clearly states that "this applies to all Volume Licensing programs", this also applies to SPLA, unless SPUR states differently)
(contact your reseller/partner/advisor, or MSFT VL team if you are unsure)
Windows Server 2012 R2 FAQ
http://www.microsoft.com/licensing/about-licensing/windowsserver2012-r2.aspx#tab=4
Windows Server 2012 R2 Licensing Guide
http://download.microsoft.com/download/E/6/4/E64F72BF-55E9-4D85-9EFE-39605D7CE272/WindowsServer2012R2_Licensing_Guide.pdf
Licensing Brief - Licensing Windows Server 2012 R2 for Use with Virtualization Technologies
http://www.microsoft.com/licensing/about-licensing/briefs/win2008-virtual.aspx
Licensing Brief - Licensing Microsoft Server Products for Use in Virtual Environments
http://www.microsoft.com/licensing/about-licensing/briefs/virtual-licensing.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Want to Buy SQL 2008/2012 standard edition to achieve Database failover

Hi Team,
We want to know exact part code details to procure 2 nos Sql 2008/2012 standard edition server to installed on "Window 2012 R2 Standard Edition, Factory installed, no media, 2 socket,2 VMs, No client" Server.
I have Access control system application (Main-Standby) on which we need Automatic database failover by using SQL Standard server. Application vendor has suggested us to procure 2 nos of Microsoft Sql 2008/2012 standard edition server.
If possible then please let me know exact part code details of Sql 2008 and 2012 standard edition server which doesn't have any issue to installed on above said server edition.
Thanks,
Vishal

Hi Vishal,
Unfortunately, we do not deal with part codes, I request you to check the below link as this is not the correct forum.
http://www.microsoft.com/en-in/server-cloud/products/sql-server/Support.aspx
Perhaps you could post you question on the SQL forum :
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
Regards,
Mekh.

Unable to rearm server 2012 standard edition.

Hi All,
I have installed server 2012 standard edition trial on 12 May 2014 but I am unable to rearm and getting error "error: 0xC004D302 On a computer running Microsoft Windows non-core edition, run 'slui.exe
0x2a 0xC004D302' to display the error text".
When I run slui.exe its ask me for activation key.
Please suggest some alternative solution.
Thanks,
Amar

Hi Amar,
àWhile activating
I am getting error "0x8007232B DNS name does not exist"
Regarding to this error, please check if use correct product key to complete Activation via the SLMGR.VBS script.
Please refer to following article and check if can help you.
Windows
2012 Activation Error: DNS name does not exist
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Error 0x8007232b or 0x8007007B occurs when you try to
activate Windows
Hope this helps.
Best regards,
Justin Gu

Write access to a directory for ASP 2.0 application stops working on Windows 2012 Standard Cloud Server

Just moved our ASP 2.0 based web application to a Windows 2012 Standard Cloud Server. A directory is used for temporary copying of files for the application. The Read Write access is properly given and everything works but then stops working
in about 2.5 hours. The settings are still there, to make things work again typically I add "Everyone" to the security list and apply and then 3 hours later I remove "Everyone" and this refreshes the security setting and things work
againg for a couple of hours. Last Cloud server was 2008 R2 and we had no issues. Recently moved to this new cloud server. Code has been functioning fine for years and can not migrate it to newer ASP since will have to make quite a few code
changes. Obviously a bug which needs to be addressed. Again the security settings do not disappear but are no longer handled properly every 3 hours or so.

Hi,
Is there any other files have the same issue? Please create a test folder and give the same permissions with the directory for ASP 2.0 application to see if the issue still exists.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SharePoint 2013 Enterprise and SQL Server 2012 Standard edition vs. Enterprise - feature question

I can't seem to find any clear answers to the implications of installing SQL Server 2012 standard edition vs. enterprise in regards to SharePoint 2013.
I understand that to get many of the features you need Enterprise edition of SQL 2012; but, what I can't figure out is if the backend SharePoint SQL 2012 is standard; but, the PowerPivot/SSRS server is Enterprise will we still get the features?
If we have 3 tier SharePoint farm, one of those tiers is for the SQL Server database backend. If that SQL instance is 2012 standard and we add another server to the farm w/ SQL 2012 Enterprise to handle the tabular models, PowerPivot, and SSRS in integrated
mode will we still get the features?
Or, can we (should we) install Enterprise 2012 as the SharePoint database backend and let that instance triple down as also the PowerPivot and SSRS instance?
The Degenerate Dimension

Hi MMilligan,
SQL Server 2012 Standard is not supported PowePivot for SharePoint . In addition, SQL Server 2012 Standard is also not support some Reporting Services Features.
For more information, please refer to Features Supported by the Editions of SQL Server 2012:
http://msdn.microsoft.com/en-us/library/cc645993.aspx.
Install SQL Server BI Features with SharePoint 2013 (SQL Server 2012 SP1):
http://msdn.microsoft.com/en-us/library/jj218795.aspx.
If you have any problem, please feel free to let me know.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support

Link to download Sql Server 2012 "Standard Edition"

We have purchased Sql Server 2012 “Standard” edition license. Looking for the link to download of installation software for 2012 “Standard” edition. Have tried
a lot but could only found - the “enterprise” evaluation copy.
Looking for urgent help on this. Thanks.

Thanks for the update.
1. Would like to check if it is possible to download Sql Server 2012 “Standard" Edition straight away rather than doing a two step install?
2. Assuming we do a two step install - during upgrade once we specify the license key, would it ask whether we need to change edition to standard/ enterprise or it automatically determines the edition based on the value of the license key?
Hi,
1.Do you have MSDN subscription ? You can download from MS link directly if you have one. Please ask the vendor who provided you with License he would be best person to call.
2. On license page you just have to enter license key that's it , after that SQL Server just knows what it has to do. It does not asks you anything about license it just proceeds
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard

Hello,
I'm getting an error when trying to add Print Services role in Windows 2012 Standard. I'm getting the same error whether I use the GUI or from PowerShell.
This is a new server install.
The PowerShell error follows:
add-windowsfeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The referenced assembly could not be found. Error: 0x80073701
At line:1 char:1
+ add-windowsfeature print-services
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
    Exception
    + FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
   owsFeatureCommand
Success Restart Needed Exit Code      Feature Result
False   No             Failed         {}
Any help with this issue will be greatly appreciated.

Hi,
I think you should start with chkdsk C: /F and sfc /scannow.
Regards.
Vivian Wang

PC Netlink 2.0 and Windows 2003 Standard Edition

Does anyone know if a Windows 2003 Standard Edition Server can be added as a Domain Member Server to a PC Netlink 2.0 domain?
When I try to join the domain I receive the message;
"The following error occurred attempting to join the domain "DomainName":<br />
<br />
The remote procedure call failed and did not execute."
Thanks
Peter

I have the same Problem; no solution yet.
Accroding to Sun Support Doc # 72542.
PC Netlink is based on NT 4.0 Server.
At the highest level it implements NT 4.0 protocols.
.NET clients, such as Windows 2003, implement a different protocol.

Migrating windows 2003 standard edition to windows 2008 enterprise edition

Hi
We are using ECC 5.0 and our PRD system is running on windows 2003 standard edition,and recently we have got some physical memory problem.as windows 2003 standard edition supports only 4 GB of RAM. and we want to extend our RAM for that we are planning to upgrade os to windows 2008 enterprise edition,is that possible.and after upgrading OS what are the activities that need to be performed for SAP to run succesfully,kindly suggest.
Regards
Pranav

Hi Markus
I read note SAP Note 690432 - Windows 2003 Support in it regarding upgradation of os windows 2003 standard edition to windows 2003 enterprise edition.
Upgrade of Your Operating System
If you upgrade an existing SAP system to Windows Server 2003 perform the
following actions:
o Install the latest R3DLLINS
You find the latest dynamic link libraries R3DLLINS for Windows
Server 2003 on the EXT-Kernel CD in the NTPATCH directory.
o Replace the R/3 kernel with the EXT-Kernel.
If you do not replace it you will get error "SICK" after the first
logon attempt after the start.
In this case, download the disp+work package(s) from the SAP
Service Marketplace at service.sap.com/patches and unpack the
patch(es) to directory usr\sap\exe:
dw*_<patch-level>
Use at least patch level 186.
o Use the latest saposcol version.
This version supports the changed performance counter of Windows
Server 2003 to determine values for ST06 and RZ20.
You can find the latest version in file saposcol_<Patch Level>.CAR.
in the SAP Service Marketplace.
o SAP DB only: See SAP Note 315237.o Compatibility of the Hardware with Windows Server 2003
You can perform the upgrade to Windows Server 2003 only if the
hardware has been explicitly released for this purpose. To check,
do one of the following:
- If the Windows Server 2003 CD is available, check compatibility
with WINNT32.EXE in the \I386 directory. The exact statement
is: <DRIVE:>\I386\WINNT32 /CHECKUPGRADEONLY. The result is
stored as text file WINNT32.LOC in the present Windows
directory (e.g. C:\WINNT).
- The hardware has successfully passed SAP hardware certification
(http://www.addon.de).
- The hardware is contained in the Microsoft Hardware
Compatibility List (http://www.microsoft.com/hcl).
- The hardware has been released for Windows Server 2003 by the
manufacturer. This information is published on the
corresponding website.
o Kerberos Single Sign-On
When the SAP system is installed on Windows Server 2003 you can
setup the Kerberos Single Sign-On. If you use the kerberos protocol
the information exchanged between the SAP frontend and the
application server for authentication is encrypted.
The procedure for setting up Single Sign-On is described in all
recent installation guides which you can download from the SAP
Service Marketplace at: service.sap.com/instguides.
o SAP domain under Windows Server 2003
Follow the instructions of the Windows documentation for the
migration of a Windows NT 4 domain to Windows 2003. For the SAP
environment some additional points need to be observed.
For Windows NT 4 there are two models for the SAP system domain:
- Single domain
All users and the SAP system build one single domain. This
domain can be migrated to Windows Server 2003 and exist there
as single domain.
- Additional domain
There is one domain for the users and a second domain for the
SAP system(s). For a migration to Windows Server 2003 the SAP
system domain has to be created as child domain under the user
domain. A "Top-down" procedure is to be used. The higher domain
(the user domain) must be migrated prior to the SAP child
domain. If the user and SAP domain is part of a larger domain
structure the complete domain structure for Windows Server 2003
needs to be planned in a preparing phase. Usually, the
structure created under Windows NT 4 has to be re-arranged and
consolidated.
The name space of the root domain and all sub-ordinated domains
has to be defined and the distribution of the DNS services
needs to be determined.
Note the following:
The SAP domain has to be created as child domain.
The SAP domain must not be converted into an organizational
unit (OU). OUs are not supported by R3SETUP and R3up.
in it nowhere it is mentioned about system copy so plz suggest.

8 vcpu for Windows 2008 Standard Edition Guest

Hi,
Due to a software requirement, I'm investigating the possibility of creating an 8 vcpu Windows 2008 Standard Edition 64-bit guest.
In Vsphere, its possible to create an 8 vcpu windows 2008 Standard Edition guest by configuring the "cpuid.coresPerSocket" parameter to 2, which allows the Standard Edition windows license to see 8 cores without violating the standard licensing which caps it at 4 processors.
Is there a similar functionality in Oracle VM Server?
Thanks.
Terence
Edited by: 835043 on 8/02/2011 19:53

Hi Simon,
Read that link you sent and I believe it allows us to play around with cpu cores in Windows Standard Editions in virtual environments.
"Software run in a virtual OSE is licensed based on the number of virtual processors used by that virtual OSE. If the physical processors in the server have two cores, each virtual processor also has two cores from a licensing perspective."
So its up to us to configure the cores as it defaults to single core for each vcpu.
I've tested in vsphere using 4 vcpus and setting it for 2 cores each. The OS sees only 2 processors but I've got 4 threads in task manager. If I revert to 4 single core vcpus, the OS sees 4 processors.
I'm trying to see if I can do the same in Oracle VM and am trying to understand the cpuid setting in the vm.cfg. The examples given in xmexample.hvm-stubdom are for Intel 8 core and AMD 5 core but all I have is AMD dual core.
So trying to figure out how to set it correctly in my situation. Haven't found any detailed documentation for configuring those ebx, ecx, edx settings.

MSDTC on Windows 2012 Standards edition

Similar Messages

Maybe you are looking for