MSI GE72 2QE - Fn and WinKey are swapped after EC upgrade

Hello. I installed newest EC from MSI site and now my Fn works as WinKey, and WinKey works as Fn. How to change that? Why official (not modded) EC has that bug?
BIOS: E1791IMS.105
EC: 1791EMS1.505
Please help me.

MSI people will guide you further about it.
From your current old bios version probably need an alternative way for flashing [not from bios setup]
Quote
because "rom image version is invalid". I can click "do it anyway", but it's risky.
leave it as is for now.
don't proceed further since you received such error and wait for further advice.
P.S:
Moving topic to proper section
[your topic has been posted in the wrong area]

Similar Messages

  • MOVED: MSI GE72 2QE - Fn and WinKey are swapped after EC upgrade

    This topic has been moved to GAMING Notebooks.
    Moving topic to proper area
    https://forum-en.msi.com/index.php?topic=256181.0

    MSI people will guide you further about it.
    From your current old bios version probably need an alternative way for flashing [not from bios setup]
    Quote
    because "rom image version is invalid". I can click "do it anyway", but it's risky.
    leave it as is for now.
    don't proceed further since you received such error and wait for further advice.
    P.S:
    Moving topic to proper section
    [your topic has been posted in the wrong area]

  • [Video review & test]MSI GE72 2QE Apache

    This is a video review (there's also an article) done by a Turkey media, Technopat.
    ......ah.....I dont understand turkish, either.... but there are images, test results (13:56) and you can see the interior mechanic designs (06:12) ...so check it out!
    The way they speak is quite interesting, too. haha 
    Here's the video
    Here's the article
    http://www.technopat.net/2015/04/15/msi-ge72-2qe-apache-incelemesi/

    Quote from: queenawiki on 23-April-15, 09:50:46
    It's really funny, there should have black tea with Baklava 
    haha indeed.

  • Trasformations and DTP are decactivating after adding some NAV in cube

    Hello Experts
       Trasformations and DTP are decactivating after adding some NAV in cube and activating it.
       I knew that it is normal but activating all the DTP's and Transformations is painfull work, would like to just know whether there is any programme to activate the dependent objects!!!

    yes, thats right. A stupid job.
    in my last project I created 3 multicubes, 14 infocubes and 23 dso's.
    -> 1 change in the data modell and you must reactivate 20 objects.
    I wrote a ABAP program to activate
    - datasources
    - transformations
    - DTP's
    - update roules and
    - multicubes.
    It's very nive. So simple now, to make a change.
    I select
    - a object or
    - or an infoarea
    - and the program search all objects in the dataflow.
    I have two modes
    - to display all objects
    - and activate the inactive objects.
    They are many tasks, where I think a tool can help me to increase my development performance. But I don't have enough time.
    Sven

  • Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

    Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

    Try this:
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).

  • MSI GT72 2QE screen and ram

    Hello,
    I bought a MSI GT72 2QE-476NL. Some sites say its a IPS screen and some say its a TN..
    Is there a way to check what screen i have?
    Also i want to add a extra 8GB ram, but i cant find what type i have now, the 1 slot that is in use is not visible from the back..

    the RAM is DDR3L 1.35v or less
    other than that is just DDR3L the L means low voltage
    the screens in almost every 17in MSI are TN based you do see some IPS at 15 and smaller
     but not as much as other mfgs
    i need to know how much ram you have then i can tell you how much you can add
    the GT72 2QD base has 4 sodimm DDR3L slots ratted for 1600mhz
    the 12GB models have 4GB+8GB in the slots under the keyboard leaving both bottom slots open
    the 16GB models have 8GB+8GB under the keyboard still leaving the slots under the keyboard open
    the 24GB models have 4GB+8GB under the keyboard and 4GB+8GB in the bottom meaning all slots full
    the 32GB models are full 8GB X 4 and this is max ram supported
    as far as i know they are all running at 1600mhz effective DDR3 my 12GB model 2QD 406 has 9-9-9-20 timings at 1600mhz 1.35v without your full model number or the first 8 char and number from the Serial number i can't say much more

  • 3 cfgrids on one page.  Columns from grid 1,2 and 3 are swapping the first select box from each grid.

    ColdFusion 11, hot fix 3 installed but did not help. There are no binds.
    This one has been driving me crazy and I have finally figured out that it is the first column in each grid where there is a select box via "valuesdisplay" that is the issue. Select box results are switching grids!
    Example of how it is coded to display:
    Grid 1 - gridcolumn should have a dropdown with 1,2,3
    Grid 2 - gridcolumn should have a dropdown with a,b,c
    Grid 3 - gridcolumn should have a dropdown with x,y,z
    However, the results in the dropdowns in the grids are:
    Grid 1 - x,y,z (should be 1,2,3)
    Grid 2 - 1,2,3 (should be a,b,c)
    Grid 3 - a,b,c (should be x,y,z)
    This only happens with the first dropdown for each grid. Any other columns with dropdowns do not have any issues and do not swap out to the wrong grid.
    Sample of my code from the grids:
    Grid 1:
    <cfgrid name = "evalgrid"
      height="200"
      autowidth="no"
      font="arial" fontsize="12"
      query = "getevalfinal"
      SORT="Yes"
      selectmode="edit"
      format="html"
      insert="yes"
      delete = "#deletevalue#">
      <CFGRIDCOLUMN NAME="numberofschools" HEADER="numberofschools"
      HEADERALIGN="LEFT" DATAALIGN="LEFT"
      BOLD="Yes" ITALIC="No"
      SELECT="Yes" DISPLAY="Yes"
      HEADERBOLD="Yes" HEADERITALIC="No"
      VALUES = " ,NA,1,2,D"
      VALUESdisplay = "Blank,NA,1,2,D" valuesDelimiter=","
      width=50>
    </cfgrid>
    Second Grid:'
    <cfgrid name = "SecondGrid"
      height="100" width="700"
      font="arial" fontsize="12"
      query = "getsecurity"
      SORT="Yes"
      selectmode="edit"
      format="html"
      insert="yes"
      delete = "#deletevalue#"
      autowidth="yes"
      >
      <CFGRIDCOLUMN NAME="userrole" HEADER="userrole"
      HEADERALIGN="LEFT" DATAALIGN="LEFT"
      BOLD="Yes" ITALIC="No"
      SELECT="Yes" DISPLAY="Yes"
      HEADERBOLD="YES" HEADERITALIC="No"
      VALUES = "#olduserrole#"
      VALUESdisplay = "#olduserrole#" valuesDelimiter=","
      WIDTH=300
      font="arial" fontsize="12">
    </cfgrid>
    In the above code, userrole values end up being in the wrong grid where numberofschools values should be and vice versa.
    Appreciate any help!
    B.

    You may find this article useful: [http://balusc.blogspot.com/2007/10/populate-child-menus.html].

  • All my apps and music are gone after i updated to 5.0.1

    i did back up my ipodtouch before i updated it. all my musics and apps are gone and only thing it backed up is my pics, contacts, and some other stuff. is there anyway i can get my apps and musics back?

    You said you did a backup...
    iCloud backup or iTunes backup?
    Also, two suggestions for next time:
    Software updates can be done right from your device, under Settings > General > Software Update if you have iOS 5 or later. This usually prevents a lot of problems users typically run in to when updating in iTunes.
    When updating in iTunes, even though your restore may seem complete, it is still restoring your apps, music, etc. Please be sure that it is absolutely complete before unplugging.

  • Top leven navigation and Tool area dissapear after upgrading SP19

    Hi all,
    we have upgraded the J2EE engine and the EP to the SP19 and when we enter the Portal, the top level navigation and tool area have dissapear.
    It could be some parameter wrong or an error during the upgrading?
    Thank you in advance for your help.

    Hi Rahul,
          See SAP Note: 1002832. These are the details:
    <b>Reason and Prerequisites:</b>
    The problem is caused by a program error.
    This note applies to NW04S SP8 - SP10 and NW04 SP16 - SP19.
    <b>Solution:</b>
    The problem is fixed with NW04S SP11 and NW04 SP20.
    The reason for the problem are missing ACLs that are normally created automatically when roles are imported.
    In order to resolve this problem please do the following steps;
    1 - Logon to the Portal with user having "super admin" rights.
    2 - Replace in URL the "/irj/portal" part with the following /irj/servlet/prt/portal/prtroot/com.sap.portal.admin.acleditor.listPermissions.
    This starts a component that lists all permissions in the PCD. It might take some time until it is finished.
    3 - Please scroll all the way to the bottom of the list. If there is a botton "fix inner acl", click the button. The missing permissions for the roles will be created. If there is no such button, the permissions are OK. The reason for the symptom is something else then.
    Hope this helps.
    Regards,
    Pooja.

  • Backups and exports taking longer after Oracle upgrade 8.1.7 to 9.2.0.6

    We recently upgraded Oracle from 8.1.7 to 9.2 and also applied HP-UX OS patches after the upgrade....now the backups, exports and batch jobs are running little longer (1 hour longer)...any known issues?

    For Batch jobs -- Try analyzing your database schema's referred by batch jobs. Also look if you have suff o/s resources as recommended by oracle for running Oracle 9i software.
    For backups -- Check the size of your dmp file before upgradation and after upgrading to 9i. If you do not find major diff in size then it could be a resource issue like cpu usage / io / memory.
    Thanks,
    http://askyogesh.com

  • TX Power Levels are low after WLC upgrade to 7.0.98.0

    I recently upgraded our WLC 4404 to release 7.0.98.0.  The process was very smooth with no
    issues.  The controller manages access points in two buildings. Prior to the upgrade the access points were maintaining high TX power levels...typically between 1 and 3.  After the upgrade the power levels all droped to 6 and 8.  I have confirmed that the correct external antenas have been set for each access point.  I have not done a site survey to see if the lower power levels are acceptable.  But the environment has been very consistent for the past year with regards to TX power levels.  For the time being I have manually set a power level of 2 to prevent any service outages. Is there any explanation as to why the power levels have changed so drastically?

    My customer is having a simlar problem with 2106 controller and 1131 AG access point.
    After I upgrade the controller for 7.0.98.218, the access points was setting automaticly by controller with power level "0".
    When its happening I see the follwing logs
    Thu Dec 15 12:19:15 2011 AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:00:3a:98:19:e7:c0 Cause=Heartbeat Timeout Status:NA
    70 Thu Dec 15 12:19:15 2011 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:3a:98:19:e7:c0 Cause=Heartbeat Timeout Status:NA
    Can You help me?
    thanks, Murilo

  • HCM Processes and Forms not working after SP Upgrade

    Hi Friends,
      We recently upgraded our Service pack level of ABAP and Basis.SAP_BASIS -   from SAPKB70016 to SAPKB70019
    SAP_ABA    -   SAPKB70016 to SAPKA70019. Prior to the the SP upgrade everything was working fine. After the upgrade we are having the following issues.
    1. In Portal after opeing the Adobe form, If the move the cursor to the top portion of the form where we can add the attachment("Add attachment" button), the cursor always turns into the wait symbol and we are not able to attach anything into the form.
    2. In a separation form the Date field is an input field and even if the user enters a different date  the system takes the current date. The user also selected the separation reason from dropdown menu, but no display in form.
    3. Transfer form is having the following issue:When initiating the form the u201Csendingu201D manager must input the personnel number (identical to the user ID) of the u201Creceivingu201D manager. This way, once submitted by the sending manager, the system can determine the next agent in the process.Recently, that form has stopped working and the value entered by the sending manager is no longer recognised and the system issues the error message  u201CEnter the system user name of the manageru201D.
    Please help if you have any hint.

    Resolved after consulting with OShttps://forums.sdn.sap.com/questions.jspaS

  • Loss of key clicks and music via speakers after ios5 upgrade

    Have lost key clicks and music via speakers after updating to ios5.  Sounds are there when headphones are plugged in.  Have checked all settings and done hard and soft resets. What to do?

    I've been tracking some issues on the Conexant drivers. Can you send me a DxDiag.txt and your c:\windows\inf\setupapi.dev.log file to "mediaq at Microsoft dot com"?
    Thanks!
    John W [MSFT]

  • Spotlight and Time Machine broken after restore/upgrade

    I've found a few similar threads to this but none of those solutions has worked for me.
    Two things happened at nearly the same time, so I don't exactly know the source of my problem:
    I upgraded my old MacBook Pro (approx. Oct 2010, 2.66GHz I think, 300GB-ish HD) from Lion to Mountain Lion
    The hard drive on my old MacBook Pro developed a terminal fault, so I had to buy a new one (8GB, 750GB HD) and restore a month-old Time Machine backup from my external drive.
    I can't remember whether my last Time Machine backup to my external drive was before or after I upgraded to Mountain Lion.
    Now I'm on OS X 10.8.2 on this new machine and I have two problems that seem to co-exist for a lot of other people too:
    Spotlight won't index: this is f***ing infuriating, I love spotlight and I use it all the time. When I first restored from the TM backup I think the old index restored with the backup as I did get a decent number of search results (both in spotlight and in MS Outlook), but new files didn't seem to get recognised. I tried adding my hard drive to the exclusion list and removing it again in an attempt to get it to rebuild the index, but all that did was wipe the old index without building a new one, so now I get no spotlight results whatsoever. I tried this solution and sadly it hasn't worked either. Basically I can't search for anything. Even applications (which I like to launch from spotlight) don't appear. All I get is "estimating indexing time", and it never gets any further.
    Time Machine won't back up: the first time I tried to backup my new machine it got a few hundred megabytes in before stalling; then a few hundred kilobytes in the next time I tried; and now it just doesn't get anywhere at all. The external drive I'm trying to backup to is recognised fine, I can see all the other files on it, and Time Machine seems to know that it's there, but the backup gets nowhere.
    There are reports of this kinds of crap all over the Apple Support forums, but no definitive answer, especially for 10.8.2.
    I could really do with some help on this. I need a backup before I screw another laptop, and I need spotlight to survive day-to-day life.
    Thanks,
    Craig

    Hi Craig - I had the exact same problem - I'm using an old early 2009 MacBook Pro upgraded to 8 Gb Ram, 1 TB internal Hitachi HD, 10.8.2 - tried the fixes suggested - got it to work with these steps- everybodies mileage is different but hopefully it works for you as well.
    a) I repaired disk permissions with Onyx (free utility)  and then  started  up with Command-R using Disk Utility to repaired/check the Volume (harddisk checked out fine but the volume needed some minor repairs )- Onyx repair disk permission seems to go deeper -had to reinstall some apps - don't know if this solved it-seems to bring it back to the default state - you might get away with doing all from Disk Utility (but starting up with  Command-R)
    b) restart from my internal hd
    c) downloaded the 10.8.2 combo update ( not the incremental shell update or whatever you call it which automatically gets installed with software update - combo update installs everything fresh from the .0 version)
    d) with  Onyx  I deactivated spotlight and erased the spotlight index
    d) restart
    e) started TM backup - prep took pretty long 30 minutes but then 450 GB got backed up in 6 hours to my external HD which is fast enough for me
    f) activated spotlight and 450 Gb were indexed in 9 hours or so
    g) for 2 days everything runs fast and very responsive
    best,
    Franz

  • InDesign 5.5 & 6 AND Acrobat Pro crashing after Yosemite Upgrade

    I've tried several of the fixes suggested however my InDesign is still crashing when I try to SAVE or EXPORT. I copied the files I need right away to work on into Illustrator. Converted the files to PDF's. Went to create a PDF file and I'm getting the same crash report that I get from InDesign. I'm getting desperate. Can someone please help?
    I do not have any 3rd party FONT programs, everything has come from APPLE or ADOBE. I've done the CMD+CTRL+OPT+SHIFT command AND we've deleted the Recovery Files. Short of taking my computer to APPLE and have Mavericks reinstalled, I'm pretty lost here. Thanks for your help!!

    You didn't actually re-flash your BIOS, did you? Yes
    If it was fast before the infection, and slow after the reformat, then this is pretty much the only place that anything could be different. I'd be more inclined to test hardware than continue chasing software, in your shoes.
    Ran various RAM tests, and the BIOS shows nothing out of the ordinary.
    But it's certainly nothing to do with the software, unless the new install was botched for reasons having nothing to do with the virus, or that the virus is actually hiding in one of the spots on the motherboard that can be written to, like the BIOS.
    Clear one thing up for us - you say
    Adobe Software: Originally CS3 Suite, now CS5 Suite
    Does that mean "it ran like a dream with CS3, but now that I have CS5 it's running slow?" Because, if so, you're chasing a red herring - CS5 consumes a lot more in terms of computing resources than does CS3. You should be looking at how to tame CS5's resource consumption, and there are plenty of threads about that.
    After the reformat, CS3 Indesign was a dog as well as Acrobat 9 Pro. Upgraded to new CS5 Suite (all but Acrobat 9 Pro). CS3 & 5 Indesign still a dog as well as Acrobat 9 Pro
    Lastly, I haven't seen malware hiding in flash ROM on the motherboard more than once in the last decade. It wouldn't generate any error messages or beep codes, either.
    Same here, have not witnessed malware/viri infultrating the BIOS since back in 99'. Never the less, it's the only idea I can come up with. I have yet to locate any software for testing the NVIDIA NVS 290 video card. This is the strangest issue I have seen ever.

Maybe you are looking for