MSI NX8600GTS Problem

My Original setting is
MSI NX8600GTS T2D256E-HD-OC
MSI 740GTM-P25 (MS-7302)
Gigabyte 460W SuperB
14in CRT Plug n Play
DDR2 PC800 Memory
NO HDD INSTALLED
NO FANS
NO CD/DVD DRIVE
the Problem is.. my VGA is not detected by the motherboard
troubleshooting done.
(Bios UPDATED by MSI LIVE)
1. Change the VGA to MSI NX8500 GT TD256E - Perfectly working
INNO3D 9400GT 1G DDR2 - Perfectly working
Powercolor HD4650 512mb DDR3
Sapphire HD4670 1G GDDR3 - Perfectly working
2. Change the MB to MSI G31TM-P31 - Perfectly working
Asus P5SD2-VM - Perfectly working
3. Change the PSU to Generic 600w - not working but working with settings 1 or 2
True Rated 350W - not working but working with settings 1 or 2
Generic 500w - not working but working with settings 1 or 2
Generic 400w - not working but working with settings 1 or 2
4. Change Memory to 533/667 - not working but working with settings 1 or 2 except MSI G31TM-P31 Supports DDR 800 above
Is the parts incompatible? Thanks in advance

yes.
Quote
2. Change the MB to MSI G31TM-P31 - Perfectly working
Asus P5SD2-VM - Perfectly working
3. Change the PSU to Generic 600w - not working but working with settings 1 or 2
True Rated 350W - not working but working with settings 1 or 2
Generic 500w - not working but working with settings 1 or 2
Generic 400w - not working but working with settings 1 or 2
4. Change Memory to 533/667 - not working but working with settings 1 or 2 except MSI G31TM-P31 Supports DDR 800 above
Is there any record in incompatibility between these two?

Similar Messages

Problem installing MSI P35 Platinum & MSI NX8600GT & windows XP

Hi all,
I just bought my MSI P35 platinum mobo and MSI NX8600GT graphics card.
Was trying to install XP on it. During installation, got the following error message :
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** Stop : 0X0000007E (0XC0000005, 0XF748E0BF, 0XF78DA208, 0XF78D9F08)
*** pci.sys - Address F748E0BF base at F7487000, DateStamp 3b7d855c
Then it just freezes there. Any ideas how I can resolve this ? Please help
Thanks ...

Quote from: NovJoe on 07-February-08, 00:17:44
Please post your full system specs and PSU specs amps.
Moan Guide
my system specs
Intel Pentium 4 - Intel E8200, LGA775 2.66GHz, 6MB L2 cache, 1333 Mhz FSB, 45nm
MSI P35 Platinum
3 x 1GB DDR2 Kingston 6400 CL5 800MHz
320GB Seagate SATA HDD
MSI NX8600GT 256MB
Windows XP Pro
PSU : I-CUTE ATX-450W/P4
The HDD was detected correctly in BIOS, memory also detected, Graphics card seems ok (how I can tell ?)
rgds

Msi motherbooard problems

Posts: 5
Topic Starter
MSI motherboard problems
« on: 17 November 2004, 06:34:44 am »
I just recently built a computer.
When I turn the computer on it stops at the MSI Platinum screen.
When I hit the reset button the computer reboots into windows. (Most of the times)
I am not over clocking.
I have loaded the defaults in the BIOS.
I have flashed the BIOS, updated all motherboard drivers, and video drivers.
I have run memtest 23 passes and no errors.
I have a thermaltake power supply 400 watts.
There are no beeps codes at post. The case didn't come with a speaker.
I have installed windows xp media center twice.
Could this just be an unresolved Bios issue or a bad board?
The computer runs great except for the startup problem.
Any suggestion would be helpful.
12 volt rail = 12.14
3.3 volt = 3.26
5 volt = 5
vcore 1.5 = 1.48 - 1.52
Temps:
cpu = 38 - 41c
case =21c
All the rails are within the limits.
CPU fan spinning at 3258
Here is a complete rundown of system specs
Thermaltake tsunami with 400-watt thermaltake power supply
K8N Neo Platinum MSI Motherboard
SAPHIRE9550 256MB catalyst 4.11
AMD 64 3000
DDR Corsair 512MB X 2 pc 3200 value select memory 2.5,3,3,6
HD 200GB SEAGATE SATA
DVD+/-RW PLEXTORPX-712A
SAMSUNG FLOPPY DRIVE
Windows xp media center

Try stripping down your system to bare minimum. Disconnect all CD drives, Floppy and HDD from your mainboard. Remove all un-needed cards. So you should have only the mainboard, CPU and RAM and a graphics card. Connect PSU to mainboard and power up. Now your PSU should be more than enough to power just that. Does it still lock???
If it does'nt then it something to do with one of the drives or optional cards you are fitting.
If it does still lock then it something to do with the main components.
I once saw a similar issue to this which maybe unrelated but thats why i asked you to disconnect drives. The issue i saw was down to the HDD not being detected on cold boot. Thus hanging the system, if you left it long enough it carried on and then failed to boot. But press the reset button and it would detect the HDD and load windows, until you switched the PC off again and the cycle would repeat. Now that was fixed by getting a BIOS update. This may not having anything to do with your issue but might be worth a look trying what i said above.
JC

MOVED: MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=101708.0

Beta 2 or RC1 candidate???? RC1 should support..........
Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

I have MB MSI-975X PLATINUM v.1 withbios ver 1.3,processor Pentium D940 (3,2GHz/800/2x2MB),2X512MB DDR-2 667MHz,in the beginning when I start the installation on WINDOWS VISTA the computer is bloked od it is restart.This problem I solved when I put another processor INTEL 541(3,2GHz/800/1MB) whit this processor everthing is ok,but with INTEL 940 it can not be install WINDOWS VISTA .
I’m asking you for a new superstructure on bios update .

Beta 2 or RC1 candidate???? RC1 should support..........
Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

MSI GX60 problem sata3 HDD

I have a problem with with the 500 GB hdd Hitachi Travelstar Z7K500 HTS725050A7E630 in one of the slots in the laptop GX60 (slot DVD drive). The Russian Support Center could not help and advised to contact with support center - "for the objective diagnosis of faults." Do you have any information about such kind of problems with Laptop GX60 especially SATA 3? Or maybe, there is any solution to update the BIOS? This slot at the time of purchase worked WD5000BPVT sata 2.Also that slot been tested with SATA 3 ssd ADATA XPG SX900 128GB. And operates smoothly.
Hitachi 500GB Travelstar Z7K500 HTS725050A7E630 status -OK. And it works in the slot below the touchpad mode sata 3. But it is in that slot is reversed. What is extremely may affect its long performance.
Why in the slot under the DVD drive is a conflict with a 500GB hdd Hitachi Travelstar Z7K500 HTS725050A7E630?
Laptop model MSI GX60 1AC-007X bios 508 firmware 502

Hi ya,
Why did you feel you needed to change drive defaults?
Normally, hard drives are factory set to maximum compatibility. Sata I / II
You could also have defective cable........
Or many other problems............ no one will know with full system spex..........
Del

Wireless Router MSI RG60SE - Problem With Firmware

Hi, I have firmware 3.5.3 on my router MSI RG60SE. I updated this firmware to other version from here:
h t t p://faenl.msi.com/index.php?dir=Networking/RG60SE/
Problem is, that I dont know, what kind of firmware is it. When I finish updatig firmware, I dont connet to admin mode, I dont see wifi network of router. Router is maybe broken.
I am affraid, that the firmware is some special kind of firmware. Because in one of .rar files, which are including of the firmware web (h t t p://faenl.msi.com/index.php?dir=Networking/RG60SE/firmware/), contain picture. On the picture is depicted print screen from admin mode of the router RG60SE and there is available option ENABLE BRIDGES. In old firmware this option I never seen. Here is a picture with these option:
h t t p://img268.imageshack.us/img268/8885/nlw.bmp
Please, advise me, what am I doing with it. Because, none of my devices cant connect. And I dont know connect to admin mode of router. Thanks

No idea why it blocks it.
Silly is that it does work upto the last trace.
Have you tried a ping with a larger byte size?
You do know that ping is working with extreme small blocks by default.
I just noticed Google refuses to accept large packets!
Have you tried other routes except Google?
Quote
bas@Workstation:~$ ping -s 8192 80.190.249.54
PING 80.190.249.54 (80.190.249.54) 8192(8220) bytes of data.
8200 bytes from 80.190.249.54: icmp_seq=1 ttl=55 time=98.2 ms
8200 bytes from 80.190.249.54: icmp_seq=2 ttl=55 time=97.5 ms
8200 bytes from 80.190.249.54: icmp_seq=3 ttl=55 time=99.4 ms
^C
--- 80.190.249.54 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 97.505/98.406/99.449/0.878 ms
bas@Workstation:~$ ping -s 8192 www.google.be
PING www.l.google.com (74.125.79.104) 8192(8220) bytes of data.
^C
--- www.l.google.com ping statistics ---
8 packets transmitted, 0 received, 100% packet loss, time 7046ms
Try tracert 80.190.249.54 does that trace?

MSI RG54GS2 - problem with print server

Hi,
I have router MSI RG54GS2. Everything works correctly. If I connect printer to USB on router then my router works only 10 hours and then it freezes. If printer is not connected, router works fine without freezing.
I tried to use new firmware, but it doesn't solve my problem.
What should I do, please?

So, I tried it. Router works correctly without freezing but only via cable :( . If I try to connect via WiFi to my NETWORK, then my notebook and PDA find SSID and that's all. Widows show formular that everithing is connected correctly, but internet and lan network doesn't work. If I disconnected PRITER from router, then noteebok and PDA could connect to internet and local network.
:( I have only trouble with this router :> .

Maxtor SATA and MSI KT6V Problem

Hey !!!
I se many people with the simillar problem...
Our customers are getting wery angry because their computers doesn't work.
The problem first aquired with the Maxtor 120 and 80gb SATA hdd:s
We have mounted many computers and about 60% of the computers have the same problem with SATA hdds...
Allmost every computer also had MSI KT6V or DELTA
We tried every possible bios uppdate, mobo drivers, SATA drivers etc.
Does anyone have any explanasion to this problem???
After many defective Maxtor hdd:s we tried Samsiung 120Gb SATA hdd:s....same problem...
We have been in contact with MSI. Maxtor and Samsung customer services, but they had no solution
If someone has any usefull tips You can contact me at [email protected]

there are 2 threads, that you should take a look
https://forum-en.msi.com/index.php?threadid=47387&sid= that ends with RMA
and
https://forum-en.msi.com/index.php?threadid=47615&sid=
Both threads are IMHO compatibility problem, but if someone says I am wrong, I can be wrong... :hypecrite:

PLS HELP MSI Bluetooth problem

I have folowing problem.. everything worked some time ago, then i put today BT in USB, but WinXP didn't install it with message - There was a problem installing this HW MSI bluetooth device - The required section was not found in the INF.
Can anybody help?
THNX

Bugs4bugs message got me thinking... and checked the Windows Update.log in c:\windows and it has certainly pulled down a new file every time I plug in the MSI BT key. So I quickly whipped out the network cable and tried again and.... YEESSS IT WORKS!!!
Setupapi.log before:
#-019 Searching for hardware ID(s): usb\vid_0db0&pid_1967&rev_0525,usb\vid_0db0&pid_1967
#-018 Searching for compatible ID(s): usb\class_e0&subclass_01&prot_01,usb\class_e0&subclass_01,usb\class_e0
#I022 Found "USB\Vid_0db0&Pid_1967" in C:\WUTemp\com_microsoft_whql.7599401\BTDongle.inf; Device: "MSI USB Bluetooth Device"; Driver: "MSI USB Bluetooth Device"; Provider: "Bluetooth Dongle Maker"; Mfg: "WHQL"; Section name: "BCBTUsbDriverInstallXP".
#I023 Actual install section: [BCBTUsbDriverInstallXP.NT]. Rank: 0x00000001. Effective driver date: 10/17/2002.
#-166 Device install function: DIF_SELECTBESTCOMPATDRV.
#I063 Selected driver installs from section [BCBTUsbDriverInstallXP] in "c:\wutemp\com_microsoft_whql.7599401\btdongle.inf".
#I320 Class GUID of device remains: {E0CBF06C-CD8B-4647-BB8A-263B43F0F974}.
#I060 Set selected driver.
#I058 Selected best compatible driver.
[2004/02/18 21:53:52 2000.10]
#-199 Executing "C:\WINDOWS\system32\rundll32.exe" with command line: rundll32.exe newdev.dll,ClientSideInstall \\.\pipe\PNP_Device_Install_Pipe_0.{14BECCEC-D237-4765-85F1-2A8ED24D0D3A}
#I140 Installing device class: "Bluetooth" {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}.
#E067 Could not locate section [ClassInstall32].
#E142 Class: {E0CBF06C-CD8B-4647-BB8A-263B43F0F974}. Install failed. Error 0xe0000101: The required section was not found in the INF.
And after:
#-018 Searching for compatible ID(s): usb\class_e0&subclass_01&prot_01,usb\class_e0&subclass_01,usb\class_e0
#-019 Searching for hardware ID(s): usb\vid_0db0&pid_1967&rev_0525,usb\vid_0db0&pid_1967
#-018 Searching for compatible ID(s): usb\class_e0&subclass_01&prot_01,usb\class_e0&subclass_01,usb\class_e0
#I022 Found "USB\VID_0DB0&PID_1967" in c:\temp\bt\msi_bluetooth_software\btwusb.inf; Device: "MSI USB Bluetooth Device"; Driver: "MSI USB Bluetooth Device"; Provider: "WIDCOMM"; Mfg: "WIDCOMM"; Section name: "BTWUSB".
#I087 Driver node not trusted, rank changed from 0x00000001 to 0x00008001.
#I023 Actual install section: [BTWUSB.NT]. Rank: 0x00008001. Effective driver date: 06/17/2003.
#-166 Device install function: DIF_SELECTBESTCOMPATDRV.
#I063 Selected driver installs from section [BTWUSB] in "c:\temp\bt\msi_bluetooth_software\btwusb.inf".
#I320 Class GUID of device remains: {95C7A0A0-3094-11D7-A202-00508B9D7D5A}.
#I060 Set selected driver.
#I058 Selected best compatible driver.
#-124 Doing copy-only install of "USB\VID_0DB0&PID_1967\5&B114931&0&1".
#E360 An unsigned or incorrectly signed file "c:\temp\bt\msi_bluetooth_software\btwusb.cat" for driver "MSI USB Bluetooth Device" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
#W187 Install failed, attempting to restore original files.
#E360 An unsigned or incorrectly signed file "c:\temp\bt\msi_bluetooth_software\btwusb.cat" for driver "MSI USB Bluetooth Device" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
#-024 Copying file "c:\temp\bt\msi_bluetooth_software\btwusb.sys" to "C:\WINDOWS\System32\DRIVERS\btwusb.sys".
#E360 An unsigned or incorrectly signed file "c:\temp\bt\msi_bluetooth_software\btwusb.sys" for driver "MSI USB Bluetooth Device" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
#-336 Copying file "c:\temp\bt\msi_bluetooth_software\frmupgr.sys" to "C:\WINDOWS\System32\DRIVERS\frmupgr.sys" via temporary file "C:\WINDOWS\System32\DRIVERS\SET1D.tmp".
#E360 An unsigned or incorrectly signed file "c:\temp\bt\msi_bluetooth_software\frmupgr.sys" for driver "MSI USB Bluetooth Device" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
#-166 Device install function: DIF_REGISTER_COINSTALLERS.
#I056 Coinstallers registered.
#-166 Device install function: DIF_INSTALLINTERFACES.
#-011 Installing section [BTWUSB.NT.Interfaces] from "c:\temp\bt\msi_bluetooth_software\btwusb.inf".
#I054 Interfaces installed.
#-166 Device install function: DIF_INSTALLDEVICE.
#I123 Doing full install of "USB\VID_0DB0&PID_1967\5&B114931&0&1".
#E360 An unsigned or incorrectly signed file "c:\temp\bt\msi_bluetooth_software\btwusb.cat" for driver "MSI USB Bluetooth Device" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
#I121 Device install of "USB\VID_0DB0&PID_1967\5&B114931&0&1" finished successfully.
Basically, cutting out Windows Update as a possible source for a new driver forced it to use the local MSI install files.
Anyone else care to give this a try?
Now I just need to sort out the new hardware serial number nonsense key thing!
Cheers,
Matt

TS3212 bonjour64.msi - Big problems - Can anyone help?

Hi everyone!
I have a huge problem with upgrading my iTunes to the new one. Have been struggling with this for months with still no joy have tried everything suggested , the latest being to install a trial of the WinRAR archiver which seemed sucessful until just near the end - the upgrade could take place as it could not delete the old version of Bonjour64.msi. From my searches I cannot find it exists so I cannot delete it!
PLease can someone out there advise me cos I'm getting close to throwing out my computer!!!
Thank you Judes x

the upgrade could take place as it could not delete the old version of Bonjour64.msi.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

MSI NX8600GT-T2D256E OC/D3 with Dual Monitors

Hi Team
I am new in this forum please forgive me if I have break any rule (as I was not sure if to post this direct or search for FAQs)
I got the above Graphics card in my Vista 64 bit dual core machine, which was workling fine since more than 3 years. But recently i purchased Sony Bravia 46 inched full HD TV, and have plugged to my system as second monitor to watch movies and so using DVI to HDMI cable to one of HDMI slot on TV. I am using the Left DVI (when facing towards rear of the VGA card) slot to TV and Right one to my 22 inches existing LCD Monitor.
After each reboot I will have to select the resolution to Sony 1080p Native from the NVidia control panel along with HD input Audio enabled with 60Hz. Bye the way I haven't received SPDIF cable though, but I don't care as My PC is sitting next to TV and I have very good PC speakers. Anyway when i reboot the PC the BIOS screen appears on the TV and then the rest of the process happens on the standard monitor. then both monitor and TV seems normal, with all desktop icons on the Monitor with my chosen screen background, and same screen background on TV but without any desktop icons. The key thing is the display size on the TV displays only in the middle of the TV with diagonal size of about 40 inches diagonal roughly, and in order to bring this normal I adjust the TV resolution to native. Today at one stage I lost the colors on the main LCD monitor turns in to monochrome. Then system restore fixed the issue.
So my question is, is this normal?
Am I missing anything here?
Do I need to update the hardware/software, if so which model/version will support.

"Can you suggest any software program which would test the psu?"
You can't test PSU with software, but only with PSU replacement. Probably your cheap PSU is defective or weak.
Also read the links:
Quote from: BOSSKILLER on 30-July-08, 22:39:56
>>> PSU's---2 x 12v---The Dual Rail Myth <<<
>>> Is your problem caused by your PSU? <<<
For good PSU suggestions:
https://forum-en.msi.com/index.php?topic=112039.msg836246#msg836246

MSI FX5600XT problems with agp 4x and other stuff

Well
I just bought myself a MSI FX5600XT-TD128
I had a Hercules (guillemot) GEFORCE2 PRO (clock higher than GTS and slower than Ultra).
I'm not sure if my previous videocard (the gf2pro) would run stable @ 4x or run @ 4x at all.. I know my motherboard is capable of agp 4x, the old videocard I am not sure it was..
WEll, I bought the msi, plugged in and no post.
so I take the card out, put it back in, posted... 5mins later, crash..
No post..
So I put the old videocard in (gf2pro) and disable agp4x in the bios, plug the msi back in and running so far stable...
My motherboard is an IWILL KK266 (via kt133a).. very nice motherboard running on a not-so-compatible-with-it athlon xp 1600+ (1.4ghz)
The mobo problems with the cpu (processor) are limited to having to press 'reset' switch to boot (or else pc will power up but no boot).
Well my question is, is the agp 4x problem related to this msi video card in general, or to a faulty video card I *might* have (so I can exchange this one) or is it related to the motherboard???
Also, can someone explain to me the diferences between FX5600, FX5600XT AND FX5600 ULTRA?
Also, explain to me please the 'V,T,D,R' models differences too?
And Last but not least, what is the best driver for the fx5600xt and winxp??
I'm running msi latest (53.03, I installed it just to test em), I had nvidia's 52.16 prior to that.
Thanks for all ur help

Quote
The mobo problems with the cpu (processor) are limited to having to press 'reset' switch to boot (or else pc will power up but no boot).
This can also be from a weak PSU, which would be even further taxed by adding the power hungry FX card.
Might need a stronger PSU.

MSI Vivid problem !! with MSI 1950pro 256MB

hi
from last few days i am having problem in playing games. whenever there is darker environment comes in like in FEAR or Quake 4 and also in others games, it completely black out ( means i have to use flash light all the time to see around ) i think there is a problem with the MSI VIVID. it is not working properly !! or there is other problem with it ??
i have uninstall my drivers 2 times just to check out that this problem is related to the driver ........
please help me out !! it is difficult to play in dark environment in many games !
thanks.......

luckyman,
Moan Guide
Richard

Nasty MOTU MSI / Modulation problem - please help!!

OK, I've searched high and low for a solution to this, but no joy, so here goes...
For weeks now, I've had an issue with MOTU's Symphonic Instrument.
Parts recorded with it play back distorted if the active track in Logic's arrange window is not the one the plug-in is on.
The 'distortion' is in actual fact the MSI playing back as if the modwheel is full on. It sounds like a very fast square-wave gate. Whipping the wheel back and forth back to zero while the MSI track is active will temporarily cure the problem, but as soon as you change tracks, it's back. It doesn't make any difference whether the plug-in is configured in single-channel or multitimbral mode.
I've also had the same thing happen with Absynth, which suggests it might be more something to do with the way Logic handles CC#1 data from the Korg Kontrol 49. There are a number of reports about the buggy implementation of CC#1 on this controller, but they mainly concern it being used in Native Mode, which I don't use, as I need a working modwheel. Swapping the Korg out for a Roland PC300 keyboard controller had no effect in any case.
It may have been caused by CC#1 events lurking around in the MIDI parts... some of them were originally recorded with Garritan Personal Orchestra, which uses the modwheel as a volume control. However, I couldn't find any such events, and although I might have got nearer to figuring out what's causing the problem, I can't get it to stop doing it.
Inserting "CC#1 = 0" messages into the part's event list doesn't help.
Recording modwheel resets on the same track doesn't help.
Turning on the "Chase Controllers" preference doesn't help.
Using a different controller keyboard doesn't help.
Setting fire to the computer doesn't help.
I am unable to perform the 1.1.1 update for MSI, so that doesn't help. The plug-in crashes Logic's validation with a "Fatal Error." This results in it being greyed out in the AU Manager list, and I am therefore unable to enable it manually. I'm currently swapping emails with MOTU tech support about this.
If anyone can help resolve this while I still have some hair left to tear out, there's at least 3 pints of strong beer in it for them....
G5 2GHz, 8GB RAM Mac OS X (10.3.5) Logic Pro 7.1.0, MSI 1.0.0, MOTU 828mkII, Korg Kontrol 49, bad headache...

I would say do figure out how to make the upgrade first and foremost. A lot was done in that upgrade, and one may have been to fix this bug.
As for cc data, have you checked the track automation for the track with MSI? I know it's an obvious question, but if there's ghost data it will show up there.

MSI NX8600GTS Problem

Similar Messages

Maybe you are looking for