[MSI RX800XL-VT2D256E] Unable to get VIVO to work

Here's my following specs:
-MSI RX800XL-VT2D256E PCI-Express VGA card
-DFI Lanparty UT Nforce4 Ultra
-1x Seagate 160 GB SATA
-OCZ Modstream 450W
-Sound Blaster 2 Audigy ZS
-1x 2x512MB Dual Channel Mushkin Lvl II RAM
-LG 4163B 16x DVD-RW Combo
-Windows XP Pro with SP2
-Latest Catalyst drivers 5.4 without CCC
-Latest ATI MMC software
My current dilemna is whenever I tried to run the Multimedia Centre software, the program keeps bugging me that the "TV player failed to initialize the video". Upon running the PC check on the configuration, the result is that the "capture driver is not loaded nor enumerated by the device". The odd thing before running the MMC software is whenever I tried to install the latest WDM capture drivers on ATI's website, it cannot even install them at all. No ATI WDM Rage Theater Video nor the ADI WDM Specialized Codec were even detected, saying that it's an unknown device. I was able to install these WDM drivers from the CD that came with the card and it installed perfectly and that's where I cannot run the MMC software at all.
I tried to reseat the VGA card, re-install the drivers multiple times using old and new, install a fresh WinXP Pro on the hard drive, etc. You name it. I have a feeling that maybe the Rage Theater chipset is dead?

I are you saying that rx800xl have TVtuner?, or you want get video signal from a conventional TV?
until I know rx800xl does not have tv tuner, the theatre chip only provide you capture video signal with the special conectivity kit included with the video card.
regards.
Fernando Campos

Similar Messages

[Radeon] MSI RX800XL-VT2D256E w/ No Plug?

My MSI RX800XL-VT2D256E didn't come with a power plug on the GFX card, the card doesn't seem to have enough power and the picture of the product from the site has a plug on the card.. Mine doesn't, whats up with that?

Quote from: Glenn on 03-June-05, 11:43:10
I thought that connector was the European connection for VIVO.
this is in fact a VIVO connector as some European system manufacturers like to put video inputs on the front panel of their systems, and this connector easily facilitates that. The Rage Theater provides the VIVO functionality on these boards, however this may not be available with all configurations, nor the internal VIVO connector
Googled http://www.google.com/search?hl=en&q=yellow+connector+european+ATI+Radeon
Source of first search result http://www2.technobabble.com.au/modules.php?name=News&file=print&sid=7
Oh, ok very sorry, you are right. Thank you..

PLEASE HELP ME??? Lost itunes trying to downgrade back from 11.0 & unable to get itunes to work at all now..

New Itunes setup is the worst one yet!!! I couldn't stand it, so I tried uninstalling it and reinstalling older versions, but now I am unable to get it to work in any version. I have uninstalled & reinstalled several times (trying this with multiple versions). Strange thing is that ever since I uninstalled 11.0 I have not been able to get any of the other versions to open at all.. Sometimes an error message box dings & pops up that says something about how to adjust the volume through your itunes, or unable to open file.. other times when I click on the icon it just does absolutely nothing. WILL SOMEONE PLEASE HELP ME??? I'm going crazy without my music & I am panicking because I am afraid I may have lost all music (I have thousands & thousands of songs on there).. I'm hoping to find a way to reinstall an older version, but at this point if I can't find a way to bring back the old version, I'll take 11.0 if I absolutely have to (meaning if it's the only way to retrieve itunes without losing my entire library)

Have latest version of iTunes installed and running. Also make sure you have internet access working and can access Apple websites. Also, make sure you don't have any entries in your hosts file referring to gs.apple.com....If your not sure about how to do that, go ahead and do the rest first. You can come back to that later.....Plug in phone. Put phone in DFU mode.(google put iphone in DFU mode for instructions) Then restore the phone in iTunes by highliting your device in the left column and click on the Restore button. The latest iOS version is 4.3.3. That's what iTunes will restore it to. When it's done restoring, iTunes will ask if you want to restore from a backup or setup as a new phone. I would use the Setup as a New Phone option. Once it's done, you should have a clean install of the iOS and an operating phone, as long as there are no hardware issues with it.

Unable to get Phone Dialer working

Hello everyone,
I have setup a brand new client. And I am unable to get the dialer working correctly.
I have followed the directions here: Re: The Top10 most frequently asked questions and answers (FAQ) January 2009
- Telephony service is started
- Windows XP Phone and Modem settings correctly configured
- Phone Dialer does work and does show the progress of the "manual" test call
- Phone Dialer is running and minimized
- SAP/b1 General Settings/Service is setup with an area code.. nothing needed for an outside line
When I pull up a Business Partner and hover over a phone number, I hit CTRL+TAB and nothing happens... the next field is just highlighted and no dialing occurs.
Any thoughts as to what I'm missing to get this working correctly?
All input is welcome.
Thanks!
~ terry o.

Finally got this working. Please setup your dialer using these directions;
- Telephony service is started
- Windows Phone and Modem settings correctly configured with any required settings like area code or country
- Run Phone Dialer (dialer.exe) and confirm it does work and does show the progress of a "manual" test call
- Change SAP/b1 General Settings/"Service" is setup with an area code.. and outside line requirements
Open SAP/b1 and hover your cursor over a phone number. When the "phone" icon is displayed, press "CTRL + double-click".
The dialer should open and you should see the progres of your call.
Good luck!
~ terry o.

Currently working on OpenSPARC. Unable to get ModelSim for working on Linux

We are working on OpenSPARC. We need to get ModelSim to compile the code in Verilog. We are unable to get ModelSim to work on Fedora Linux Version 9, as ModelSim only works on Windows.Is there a way to get Modelsim for Fedora Linux version 9.
Regards,
K.Pradheep Kumar
19.08.08

They have a Modelsim LE version for Linux. Check this out:
http://www.model.com/products/default.asp

I am also unable to get the 551L working with Windows 8 Beta 1. Any advice?

I am also unable to get the 551L working with Windows 8 Beta 1 and Mac OS X 10.8 Mountain Lion Developer Preview 2. Any Advice?

It should be noted that I was previously in those Windows Beta's and I am also a member of both Microsoft Technet (Retail Subscription), and all 3 Apple Developer Programs (IOS, Mac and Safari), which is the reason why I am running Microsoft Windows 8 Beta 1 on 2 of my 3 Dell's (the oldest one has Microsoft Windows XP Service Pack 3 and Microsoft Office 2003 on it, which is the PC that I am using the 551L on), and the Mid Year 2010 Apple Mac Mini has Mac OS X 10.8 Mountain Lion Server Edition on it (something that I am technically am NOT supposed to be talking about here due to my NDA so this will be the last time I mention it here (as you can see I am known for being the type of Computer Nerd that loves Alpha and Beta Testing)! :-)

I am unable to get my bluetooth working message says "make sure car mutli media is in range" how do I get connected?

I am unable to get my bluetooth working on my phone. the message says "make sure car mutli media is in range" how do I get connected and what does that mean?

Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I am unable to get quicktime to work in IE10

I am unable to get quicktime to work in IE10 each time it just redirects me to the quicktime download, I've uninstalled and reinstalled quicktime, I've done a reset on IE, tried unchecking ActiveX filtering...Any other ideas?

I'm working my way through Dreamweaver CC Classroom in a Book. The template in the exercise I'm trying to complete has sections that you can edit and those that you cannot. The links involved are to buttons in the non-editable sections. Since they're non-editable, you can't employ Property Inspector to alter content in those sections. I surmise that the through the Assets Panel approach is supposed to give you the capacity to add hyperlinks to those sections. Double clicking the template does not give you access to those non-editable sections. I've tried that along with a number of other circumventing the Assets Panel approaches. I've dug up a verson of the template from an earlier exercise that doesn't have any non-editable sections and the Property Inspector works fine. With some fumbling aboutI 'm sure I could go right to the code as well.
Ultimately, I don't think I'll have any difficulty with my project working around the Assets Panel. The deal is... it's supposed to work... and it doesn't. And being blown off by support really ticks me off. I'm sure yoou understand.
Thanks for your time and effort on my behaf. Being a really stubborn son of a *****... I'll probably keep after this until I get an answer... whether I ever need to use the Assets Panel or not.
Thanks again.

Unable to get following example working

http://java.sun.com/products/jlf/ed2/samcode/textme1.html
i am unable to get this example of file menus working.
i have created a new project in JBuilder called TextMenu.jpx
i have altered the project properties to look for TextMenu as the main method but it gives me a compilation error:
"java.lang.NoClassDefFoundError: TextMenu
Exception in thread "main" "
can anyone else get this example working???

Hi there,
OK So its been two years since the last reply to this thread, but just incase anyone else out there is having problems with getting this example working in JBuilder here is how we did it.
First off remove the "package samples;" line from the top of the .java file
then locate the following line
resources = ResourceBundle.getBundle( "samples.resources.bundles.TextMenuResources", locale);
and change the part in the quotes to just "TextMenuResources".
Finally open the samples.jar file and extract the file "TextMenuResources.properties" to the class folder of the project you are working on (for example if your project was called "TextMenu" then locate the "\TextMenu\class" folder and extract the file to there).
Then compile the .java file in jbuilder and it runs, hopefully.
I'm guessing there are easier ways to achieve a working state, but i had to get this working on a college computer with a variety of security precautions in place (including no command prompt, and no control panel which makes altering the classpath environment variable hard unfortunately).
Hope that this helps someone.
Sheepy / Andy

Unable to get wi fi working?

I am unable to get my IPOD touch connected to the WI FI to download apps?

You are apparently trying to connect to protected WiFi networks to which access is restricted (hence the password).
Do you have your own WiFi network connected to an ISP providing internet access?
If the answer is no then you will ahve to find a free WiFi network (say at a coffee shop, bookstore, etc) to get internet access.
If you are trying to connect to your own WiFi network it would appear to be protected and you apparently have forgotten the password. The password can be recovered/changed if you know how to administer your router.

I have loaded the software for my new printer but am unable to get eprint to work properly. the prin

I have a new HP deskjet 3070A printer which I have loaded the software as per the disc that came with the printer but I am unable to get the printer to print emails
Presumably something is wrong with the ePrint set up.
I operate Windows Vista

Hi there keb71,
Sorry you are having trouble setting up and using ePrint. This link should be able to help you:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02728147&tmp_task=useCategory&cc=us&dlc=en&jump...=
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HT2213 I am unable to get this to work. Anyone have success on this?

I recently had a firmware update go bad on me. I did as it said and it flashed the led and beeped once and the screen remained black. After a long time with nothing happening I shut it down and tried again but this time got the 3 quick 3 long 3 quick beeps/flashes. I downloaded the firmware restoration cd and I am unable to get the cd to work. My mac is a macbook core duo and I have both the restoration cds 1.3 and 1.4. Neither work. I would appreciate any help.

Never mind. I found out that there isnt a disk for this model yet.

Presario v3702TU trying to setup it up with winxp 64 bit, but unable to get audio to work

Hi,
I just installed a old laptop of mine with win xp 64 bit + sp2.
I am able to get most of the drivers for xp 64 bit, but audio is troubling me.
I am unable to get exact driver for the below Device ID
HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C30CD&REV_1000
which should be connexant smart audio 221.
I ahve installed the UAA driver, but not able to get exact dirver for xp 64 bit. All the drivers availble on net seem to be off vista/xp -32 bit.
Please help

It is really hard to find 64bit driver
There is one has similar issue.
http://h30434.www3.hp.com/t5/Desktop-PC-Sound-and-Audio-Reply/Vista-to-XP-downgrade-No-Sound/td-p/26...
You can get the driver from the page 2, or get it the skydrive link below:
http://cid-3f10d7c1771f7efe.office.live.com/self.aspx/Public/Conexant%20SmartAudio%5E_221%5E_XP.zip
Please note, MS UAA driver must be installed before audio driver. Try to use the MS UAA driver from the page 1. If has problem then use the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&tmp_geoLoc=true&software...
Sorry, i don't have unit to do the test for you. Please let me know what the resoult is.
Cheers
Although I am an HP Employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

I am unable to get iCloud to work on my iphone 4s. check email is ok but everything else is faded and at the bottom it says iCloud back up is off. how do I turn it off?

I can't get iCloud to work. the screen says iCloud backup is off but I don't know how to turn it on, can anyone help?

I have been trying to activate my icloud on my mackbook pro running the latest lion 10.7.3 for the last 2 weeks without any luck. It says verifiction e-mail sent check your e-mail, but I never get any e-mail checke all folders no e-mail from apple. Is somebody have the same proble? How I can verify with my apple id? any help appreciated

Unable to get Twitter Stream working in SocialMiner

I've had this working in the past but recently the Twitter Stream stopped working in SocialMiner 8.5(3). I can create a Twitter Stream but when I add it to Campaigns the state "Twitter Stream read error. Last successful fetch time was NEVER, Success rate is 0%" I don't see anything was changed, DNS is working, username/password for the Twitter Stream is correct, I just can't seem to figure out what the issue is. What specific logs can I look at to determine the issue?
Thanks
Travis

@travis
Have you tried google chat? I have a system set up with google chat XMPP so I know that works (my other system is using webex connect. I don't have one set up with CUP at this time.)
Create a gmail account.
The SocialMiner settings are:
Enabled:
Yes
Enable Service Lookup: Yes
XMPP Service Name:gmail.com
User Name:
[email protected]
Password: *******
Again, SocialMiner should work with CUP as well and TAC should be able to start troubleshooting process on that but if you just want to get the XMPP working then you can see how that works with Google chat (also note: getting it to work with google may help narrow the issue with CUP.)

[MSI RX800XL-VT2D256E] Unable to get VIVO to work

Similar Messages

Maybe you are looking for