MSI Z97 Gaming 7 USB always on

Hi - I've already spoke with tech support about this topic and they couldn't help.  When I put my Windows 8.1 machine to sleep, my USB ports are still on.  Is anybody aware of a BIOS or OS setting that can sleep my USB ports too?
Thank you

What is your USB device you want to put it to sleep?
Try Hibernate? (GUIDE)

Similar Messages

  • MOVED: MSI Z97 Gaming 7 USB always on

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=184314.0

    What is your USB device you want to put it to sleep?
    Try Hibernate? (GUIDE)

  • MSI Z97 Gaming 7 - USB Device Over Current

    Hi everyone,
    I just made my first gaming PC, using an MSI Z97 Gaming 7. Everything went well, all the wires are connected correctly, but when I boot the PC, and try the setup (by typing the F1 button), this message appears:
    USB device over current status detected
    and the PC shuts down after 15 seconds.
    I tried to unplug the USBs ports of the Case, tried to unplug the battery for 15 seconds, tried to boot again but the problem was still there. I also inspected all the USB ports, and I don't see anything strange.
    Is it possible that the mainboard is faulty? Is there anything I can do about it?
    These are the specs, if they are usefull:
    MSI Z97 Gaming 7
    Intel i5-4460 @3.20
    Gigabyte GTX 970
    PSU XFX 650W XXX Edition
    RAM 8GB HyperX Predator
    1TB WD Black
    256GB HyperX SSD
    CM Hyper T4
    I hope someone can help me 

    sounds like something is shorted,
    USB ports damaged?
    have you tried rear USB ports and different USB ports?
    Quote
    I tried to unplug the USBs ports of the Case, tried to unplug the battery for 15 seconds, tried to boot again but the problem was still there. I also inspected all the USB ports, and I don't see anything strange.
    have you unpluged mouse and keyboard too? assume they are USB one too
    else take out mainboard out of PC case and place it over non conductive surface, like wooden table
    then retest
    and do you have a different PSU to try too?

  • MSI Z97 Gaming 3 usb charge

    Hello, I have an motherboard z97 gaming 3,
     Is it possible to have a voltage 5v on usb ports when pc is shut down?
     I want to charge my phone
     

    Yes there is a way, tricky that turn on Wake up event resume by USB device under BIOS, but take the risk of your PC turning on itself lol. (Better un-check the "allow this device to wake up my computer" under device manager--your mouse and keyboard.)

  • MOVED: MSI Z97 Gaming 7 - USB Device Over Current

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=251545.0

    sounds like something is shorted,
    USB ports damaged?
    have you tried rear USB ports and different USB ports?
    Quote
    I tried to unplug the USBs ports of the Case, tried to unplug the battery for 15 seconds, tried to boot again but the problem was still there. I also inspected all the USB ports, and I don't see anything strange.
    have you unpluged mouse and keyboard too? assume they are USB one too
    else take out mainboard out of PC case and place it over non conductive surface, like wooden table
    then retest
    and do you have a different PSU to try too?

  • MSI Z97 Gaming 3/Gaming 5 with an i5 4690k

    Hi guys, I just registered here and i have a few questions if you dont mind  .
    I was reading a bunch of articles saying that some MSI cards wont work with the new Devils Canyon without the bios updated.
    I was planning on buying the MSI Z97 Gaming 3 or Gaming 5 (whichever is better) with an i5 4690k, my question is will this motherboard accept the CPU right from the start without needing to update the bios?
    Thanks.

    Quote from: Nichrome on 12-July-14, 19:52:34
    Well if it works out of the box, then it just works. If it doesn't work out of the box, you would have to take the board to someone who has a CPU that should work in 100% and reflash to the latest BIOS.
    Yes, you will have to change sequence/prioritisation of the booting in the BIOS. If anything goes wrong, or you want to get default settings back, then here you can have a >>Clear CMOS Guide<<
    PS: Make sure you have your USB Stick IN when you change sequence, otherwise it won't be possible to change this. And it's not called UEFI USB, unless you will be installing Win 8 in UEFI mode?
    I guess youre right. I talked to the guys at the store im buying the motherboard from and they said they would check on monday what bios version the motherboard has and flash it if its required, even though im betting its the 1.0. Im confused here I never said anything about an UEFI USB. I always intsall my OS from a bootable USB stick that I configure with the win7 tool. Thank you kindly for your response and help. 

  • Msi z97 gaming 5 bios update help

    Hello I recently purchased the msi z97 gaming 5 motherboard. It was working fine it came with bios version 1.0 and I wanted to update it. I downloaded the latest 1.5 bios from msi website copied to usb flash drive and flashed it using mflash. Computer powers on but black screen wont do nothing. I cleared cmos and battery and still nothing so I am pretty sure its bricked. I am going to store to exchange it for another one but I want to be able to safely update the bios without bricking again. I usually dont update bios unless needed but i need at least 1.2 bios to fully support the devils canyon cpu. Can someone please point me in the right direction? I read about the usb flashing tool in forum but also read that bios+me need to be flashed and I don't know if that program is up to date and will flash both files? I really appreciate it if someone helped thanks in advance.

    Also does anyone know if it is dangerous to update the bios with a 4690k devils canyon cpu since it is not officially supported until 1.2? Is that why my first bios flash was bricked? I would hate to go and borrow another cpu just to update the bios but if I have to I will. Sorry for all the questions but I need to get my bios updated and I will not update it until I am sure of all these things. Thanks to anyone who answers these questions.

  • MSI GTX980 Gaming sometimes not recognized by MSI Z97 Gaming 9 AC

    I have been experiencing a very odd problem with my new hardware.
    Hardware
    Motherboard: MSI Z97 Gaming 9 AC
    CPU: Intel Core i7-4790
    CPU-cooler: Scythe Mugen 4
    RAM: G.Skill RipjawsZ F3-17000CL9Q-16GBZH
    Videocard: MSI GeForce GTX 980 4GB GAMING 4G
    PSU: Seasonic X-660 80+ Gold
    SSD: Crucial M550 2,5" 1TB
    Monitor#1: LG 34UM95-P
    Monitor #2: Eizo Foris FG2421
    OS: Windows 7 Professional
    Issue description
    The thing is that with 2 monitors connected the videocard is not recognized on a cold boot, but boots perfectly most of the time after a restart. In some cases a restart doesn't do the trick. I have even seen a couple of times that the monitor shows that windows starts and then the monitor loses the signal from the videocard before I can see the desktop (rare). With just 1 monitor attached the videocard is recognized. Als the IGP works fine, it's just the videocard that doesn't seem to be recognized when 2 monitors are connected (all combinations of DP, HDMI and DVI). When the computer has booted after one or more restarts and the videocard is recognized the computer works flawlessly, no problems whatever I do with it (desktop work, stressing hardware, playing games, etc.). Not a single sign of instability.
    It's just the cold boot and sometimes the soft boot or restart that causes the videocard to not being recognized with 2 monitors connected.
    What makes it really weird to me is that when the computer goes into sleep mode I can wake it up normally within say 10 minutes. But if I wait for let's say an hour the videocard is not transmitting a signal through the videocard.
    When IGP is enabled the computer boots and windows loads normally (I hear the sound of the Windows login), although the monitors stay black when connected to the videocard. Then switching the connectors from the videocard to the motherboard shows me a normal Windows login screen, but the videocard is not visible in the device list. When the IGP is disabled to bootup sequence just hangs until a restart works and the computer boots normally with the videocard getting recognized and working properly.
    Click sounds
    I noticed the motherboard makes 4 click sounds when booting, like relays flipping. I think it has to to with distributing power to al the components, since it looks like components respond to the click by turning led lights on. But I have to say I've never come across a motherboard before that makes click sounds. Is this normal?
    Tried fixes
    - Replaced the RAM with 100% working RAM from my other computer (Corsair Vengeance LP CML8GX3M2A1600C9) -> problem persists
    - Disabed XMP -> problem persists
    - Replaced the PSU with another one (Cooler Master V550 Semi-Modular) -> problem persists
    - Reinstalled the videocard physically -> problem persists
    - Tried several combinations of connecting the 2 monitors to the videocard (all DP ports, HDMI and DVI) -> problem persists
    - Replaced the videocard with a MSI GTX970 Gaming (connected with 1xDP and 1xHDMI) -> problem persists
    Conclusions so far
    The cause can be found in the videocard or motherboard (probably BIOS issue).
    Who can shed some light on this issue?

    Quote from: JLio01 on 14-November-14, 17:02:39
    Try all PCIE slots no luck? Does the black screen always happen on one certain monitor or both?
    I tried both the first and the second PCIe slot. No difference except for the fact that in the second slot the card only works at x8 bandwidth.
    Quote from: jotan.va on 24-November-14, 18:05:51
    BTW - Did anybody try to remove the wifi module from the board and then test?
    I didn't install the wifi module in the first place.
    UPDATE
    I returned the motherboard to the webshop I bought it from and sent my cpu, ram, psu and videocard (GTX980) with it so they could test it. They found out that the videocard is the problem. So now I have to send the videocard to the webshop it bought that from. However, I am suspecting that it's just a VBIOS problem and not some fault in the hardware itself. On the other hand, it would be very strange that MSI would release a videocard that cannot work with one of their own top motherboards, wouldn't it?

  • Z97 Gaming 7 usb issue

    Hi, I got an MSI Z97 Gaming 7 MB brand new and when I plug in an external HDD It works perfectly but when I plug a usb flash drive loads its capacity right in MyComputer view and when I try to open it only shows a blank window and disappear the capacity in MyComputer view only shows its name and its data type ntfs. This happens with every flash drive that isn't usb 3.0. Can someone help me.
    Thanks in advance
    Omar

    I tried many external HDDs(Western Digital 500Gb usb 3.0, Samsung 500Gb usb 2.0, Toshiba 250 Gb usb 2.0) also tried many flash drives (kingston 32 Gb usb 2.0, Samsung 8Gb usb 2.0, SanDisk 8Gb usb 2.0) I used all the usb ports (front panel and back panel) I installed all the drivers from the MB CD except for one that didn't install and show me and error message that said that the driver dindn't work for windows 7 (my OS).

  • MSI Z97 Gaming 9 ACK problem with wifi (lag spike)

    hi all,
    the problem is that all is well connected to the ethernet (killer 2205).
    while on wifi I have many lag spike when i play online game.
    I got a laptop with similar wifi card (killer 1202) and all went good!!
    so why with killer 1525 on desktop i got this lag spike? its very bad.
    the network driver is the newset
    my system:
    windows 7 64bit
    msi z97 gaming 9 ack
    i7 4790k
    16gb ddr3 2133mhz
    msi gtx 970oc
    seasonic 860 platinum

    Quote from: darkhawk on 17-June-15, 18:01:01
    I'd be more for RMA'ing the board.
    But personally, I'm staying away from Killer Network products from now on. They are buggy and do not work very well when they don't work. Sometimes they don't work at all. Check back through these forums, and one of the biggest issues with any of the boards and/or laptops is always the Killer Networks NIC's. And there is no simple and easy fix for many of the issues.
    If it was me, I'd buy a nice wireless card and use that instead. Or do the Intel mod you posted about.
    I won't say that the Killer Networks device SHOULD work, but time and time again they prove to not work. In that case, I'd replace it with something that will and move on. A $40 wireless card to not spend days or weeks trying to fix the problem is money well spent in my opinion.
    now im going with powerlink and all went good, but as all know, powerlink after 2 years will broke and need to replace..... but online game with eth is always better.
    So im tihink to resend to AMAZON and ask for refund and ill rebuy a gaming 7 without wifi this change refund me a good 100 euro......

  • MSI Z97 Gaming 7 (A2 ERROR CODE)

    Hi everyone, because I have a problem with my Motherboard MSI Z97 Gaming 7 is that when I turn on my PC after display the code 99 and 9C, remains suspended in A2. From what I've read, this code is for a hard drive failure. The system remains in A2 indefinitely code until the reset button is pressed PC. In the second restart smoothly enters the operating system.
    My System Hardware is:
    *MSI Z97 Gaming 7 (1.90 BIOS)
    *Intel Core I7 4770K (NO Overclock)
    *16GB Corsair Vengeance (2x8GB) Memory
    *MSI R7970 Lightning X2 CrossfireX
    *Crucial M4 128GB SSD
    *Seagate Barracuda 1TB Hard Disk
    *EK Custom Liquid Cooling System
    *Generic All in One Card Reader
    *LG DVD/RW Drive
    *Corsair AX1200i Power Supply
    Then I tell them what I have tried without success this problem.
    * Update BIOS to 1.9 Versión (Latest)
    * Update SSD Firmware to 070H (Latest)
    * Change SATA Cables
    * Change SATA Ports
    * Reinstall Windows 8.1 in UEFI and Legacy Mode
    * Test each Ram Memory Sticks
    * Disconect internal USB Card Reader, Front Ports and Corsair Digital Link
    * Test try another SSD (Kingston V300 128GB)
    After trying all these things, the system is still hanging in A2 Error
    Thanks for any help you can give me.

    Quote from: pandaz on 24-April-15, 13:03:29
    You could try your device 1 by 1 and see which one of it is causing the A2 issue
    about this i already suggested the same:
    Quote from: Svet on 23-April-15, 21:42:28
    connected them one by one, and see which is causing this hang eventually
    he said any one of them alone is caused this A2 when its connected:
    Quote from: sebastianmancipe on 23-April-15, 21:49:10
    Already perform this test with any 3 devices, SSD, HDD or DVD's the same.
    Curiously hangs on A2 code when first turned not when restarted.
    Quote from: sebastianmancipe on 24-April-15, 04:12:03
    ¿this version of BIOS where it came from? It is official? because they have not posted on the official website of the Z97 Gaming 7? as had understood the latest BIOS for this motherboard is the 1.90
    its official, but beta bios and newer than your current.
    try all other things 1st that people suggested you, leave bios flashing as last option

  • MSI Z97 gaming 7 + intel i7 4790k

    Hello. I bought the M/B  MSI Z97 gaming 7. While I don't know what version of BIOS firmware installed. And I couldn't check it, because I only bought the motherboard. I want to buy a CPU for this motherboard - intel i7 4790k. Latest firmware version for this motherboard specified on the official website is 1.8
    - Updated the VBIOS and GOP driver.
    - Updated CPU Micro code to support new Intel CPU.
    - Improved Asmedia SATA device compatibility.
    When updating the BIOS via M-Flash, please make sure that your USB storage device is recognized as a "Removable Device",
    If your USB storage device is not recognized as a "Removable Device", please update the BIOS via MSI Live update under windows.
    Maybe this will turn out, that this processor (intel i7 4790k) will not work for this motherboard because of outdated firmware, and flash card is not recognized so I can't flash the BIOS or through a flash card or through Windows ?

    Quote from: 964758 on 23-January-15, 22:33:17
    Dear friend. Another question. How you understand about version of BIOS firmware by serial number of motherboard ? B - (means BIOS), 14 (means version 1.4) ? Do I understand correctly ? I will be waiting for your reply
    NO you have that wrong and I will explain it to you:
    its based off DATE! you can work out roughly what it will have shipped with by just cross-referencing the manufacture date and the BIOS release dates and which one was available at the time!
    here is how you tell when it was made from MSI: S/N: 601-7916-010B1406030678 that is the date code in RED (Format YY/MM/DD) so that puts your board as made at 14/06/03 so it will have the BIOS version that was available at that time!
    Nichrome has made a slight Mistake here your board actually has BIOS version 1.3 installed (>> 7916v13.zip <<  2014-05-23 BIOS version) out the factory from the date code as its a early 2014 - June board towards the begging of the month (1.4 was not out till the end of the month)!
    your board Will still support the chip (i7-4790k) as its got the minimum BIOS version (1.3) for that CPU for it to work out the box with it!

  • New MSI Z97 Gaming 3 - very strange audio issues

    (sorry for the long post)
    Hi, I recently bought some computer parts from Newegg and built my first gaming pc yesterday, but when everything was finished setting up I noticed a major issue with the audio. Both the headphone jack on the motherboard and the headphone jack from the front panel connector aren't working correctly.
    If I plug in my headphones into the motherboard jack, the audio level is REALLY low. Like, even if I turn up the volume to 100% it sounds like it's only at 10%. I looked through the volume settings for the headphones and didn't notice anything wrong. Then I tried updating my drivers with the cd and ran the live update utility, but nothing changed. Also, the audio will sometimes make distorted/static sounds when the music itself is loud, yet I can still barely hear the music.
    The front panel jack is even worse! The sound is much more distorted/static-y when I plug in my headphones there.
    I know it's not my headphones fault because they work fine on my laptop. Even if I plug in a different pair, I still get the same low volume and static.
    I know the front panel issue is not because of the case. If I put the motherboard in an old HP case and plug in my headphones into the front panel on this case, same issue. (I know the old case normally works fine).
    I even tried running a linux live usb in case it was something wrong with Windows. It still had the same issues.
    My specs:
    MSI Z97 Gaming 3 ATX LGA1150
    Intel Core i5-4590
    MSI GeForce GTX 970
    Corsair Vengeance Pro 8GB
    WD Blue 1TB
    XFX XTR Series 550W
    Windows 8.1 Pro
    I would really appreciate some help. It seems like I've tried everything. 

    Hi
    What is the BIOS version your board currently has?
    Try without graphics card and with single RAM stick.
    You could also try out of the case on non conductive surface like wooden table or motherboard box, and see if it works then. Might be something in either cases shortening the board.

  • MSI Z97 MPOWER MAX AC vs MSI Z97 GAMING 9 AC

    I can't decide which motherboard to purchase.
    MSI Z97 MPOWER MAX AC = 20 Phase, 1x Intel I218-V Gigabit LAN controller
    MSI Z97 GAMING 9 AC = 16 Phase, 1x Killer E2205 Gigabit LAN controller
    I'll be gaming, and having a play with overclocking, which is the best do you reckon, they seem practically the same otherwise?
    Which one would you choose?

    Cheers for the replies guys, I appreciate everyones opinions. 
    Been digging for some more info...
    Quote from: Techpowerup | Posted:  6th May 2014
    MSI Also Launches its Z97 Gaming Series / Z97 OC Series Motherboards
    The Z97 MPower MAX AC is a notch below the Z97 XPower AC. It offers a milder 12-phase VRM to power the CPU, but one that draws power from a combination of 8-pin EPS and 4-pin CPU power connectors, and featuring a coolant channel through the VRM heatsinks. There's no PCIe bridge chip, but the board still offers three PCIe 3.0 x16 slots (x8/x4/x4 when all three are populated). Storage connectivity on this board includes eight SATA 6 Gb/s, and one M.2 slot. The rest of its connectivity includes ten USB 3.0 ports, 802.11 ac WLAN, Bluetooth 4.0, gigabit Ethernet, and AudioBoost audio with headphones amp and ground-layer isolation. The Z97 MPower MAX is the most "affordable" of the lot, at under $200. Its feature-set is more or less identical to that of the Z97 MPower MAX AC, except it lacks 802.11 ac WLAN, Bluetooth 4.0, liquid-cooled VRM heatsinks, and onboard OC fine-tuning buttons.
    The Z97 Gaming 9 draws power from a combination of 24-pin ATX, 8-pin EPS connectors, and uses a 16-phase VRM to condition power for the CPU, which is wired to four DDR3 DIMM slots, and three PCI-Express 3.0 x16 slots (x8/x4/x4 when all three are populated, x8/x8/x0 when two are, and x16/x0/x0 when one is. 3-way SLI and CrossFire are supported.  An EMI shield covers the rear-panel I/O, while another shields the entire onboard audio circuitry, and the NICs. Audio is care of a 100+ dBA SNR DAC, which an external headphone amp circuit, ground-layer isolation, audio-grade capacitors, and EMI shielding. Wired connectivity is handled by Broadcom's newer Killer E2205 gigabit NIC. Wireless connectivity is handled by an Intel-made chipset that offers 802.11 ac WLAN, and Bluetooth 4.0 connectivity. Storage connectivity is devoid of SATA-Express, but features eight SATA 6 Gb/s, and an M.2 slot. Overclocking features include voltage measurement points, and POST LED display. Expect this one to go for over US $200.
    The Z97 Gaming 7 and Z97 Gaming GD65 are two different beasts, although they're in the same price bracket (around $180). The Gaming 7 features an all-PCIe expansion area with modern M.2 slot, while the GD65 features dated mSATA 6 Gb/s. The rest of their feature-sets are identical, even if their PCBs are not. You get a 12-phase CPU VRM, three PCI-Express 3.0 x16 slots (x8/x4/x4 when all are populated), eight SATA 6 Gb/s ports, AudioBoost audio, and Killer E2200 NIC. The story repeats itself with the Z97 Gaming 5 and Z97-G45 Gaming.
    Barring the milder 8-phase CPU VRM, both are similar in features to the more expensive Gaming 7 and GD65, with the exception of two fewer SATA 6 Gb/s ports. At the entry level are the Z97 Gaming 3 and Z97-G43 Gaming. The two are designed for gaming builds with no more than two graphics cards, and offer some legacy PCI slots. The two offer AudioBoost and Killer E2200, but skimp out on the CPU VRM, featuring just a 6-phase one. Storage connectivity is consistent with those of the Gaming 5 and G45.
    Source / Source
    £199.99 - MSI Z97 Gaming 9 AC (Amazon UK)
    £168.20 - MSI Z97 MPOWER MAX AC  (Amazon UK)
    £129.53 - MSI Z97 Gaming 7 (Amazon UK)
    £124.99 - MSI Z97 MPOWER - (Amazon UK)
    £123.86 - MSI Z97-GD65 (Amazon UK)

  • MSI z97 gaming 7 , the computer hangs tightly

    Hello ! MSI z97 gaming 7 , the computer hangs tightly. all USB are switched off, and on the motherboard the mistake 25 is highlighted. The image on the monitor too hangs. In what reason? What the mistake 25 means ? When scanning on errors of RAM by means of memtest86+ the computer also hangs, only reset helps

    Quote from: 964758 on 10-April-15, 17:28:43
    Evo Labs 750W Quiet Silent PC Power Supply PSU Black with Red Fan (China cheap PSU). All ports were tested by RAM, the problem remains. (I bought a used RAM). M/B a brand new
    I doubt this PSU even supports Haswell? Try something from quality range (Corsair, Seasonic, Antec etc.) and see if it works then.
    Also... for Xth time, I will also mention this:
    >>Posting Guide<<

Maybe you are looking for