MSMQ BC - Error while Startup- Native Lib not found

Hello forum,
I try to get the MSMQ BC running at our sparc/solaris hostet Glassfish
MSMQ BC needs a native dll "msmqbcjni.dll" to run.
But no matter how I place this file and set glassfish's native_lib_path.
The start of the component fails with the error "msmqbcjni" not found.
I managed to start MSMQ BC at my wintel machine without any problem.
Is it possible to run MSMQ BC at sparc/solaris? Isn't "msmqbcjni" a native wintel dll? So how should it run at sparc?
Maybe I am wrong. (I hope so ;-)) It would be very useful to interact with MSMQ for us.
Any suggests or experience with it?
Thank you
Marco
p.s. The screencast tutorials placed with several projects are often not really helpful. A simple demo app would help to make much things easier to understand.

They've probably hung your post on the "RTFM" wall of fame... ;)
Section 8 of the MSMQBC manual, published Nov. 2006:
Great Joke! And where can I find this Magic Document?
I am not the type of person who is too lazy to search.
But I cannot find such a document.
If you look at [http://wiki.open-esb.java.net/Wiki.jsp?page=MSMQBC]
the only described limitation is..
Limitations
HTTP Support- MSMQ Version 3.0 provides HTTP Protocol, this is used to send messages to respective destination queues but we cannot receive message using HTTP. For more information please go through MSMQ HTTP Support

Similar Messages

I have updated version of firefox (18.0) then also i found error while watching video"video not found"

i facing n error while watching online videos that "video not found " please help

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Error while rendering: Export file not found - what to do?

Hi,
I have been editing my video in four different premiere pro projects (as I got adviced to do from these forums because it's AVCHD clips). I have rendered these four projects and burned to four DVD's (total playtime is around 1.5hours) - which is working fine.
But then I try to import all four projects into one big master project because I want to make a blu-ray iso. The import goes fine (I import like this: File > Import > Choose project > Import entire project)
I export to encore, make the menus etc. and click "build" to start rendering. The problem is that after some time I get this error:
Blu-ray Object: "sequence-name-here/project-name-here.prproj", Export file not found
I have seen this error before while rendering some of the four individual projects - but when I saw them I simply just tried again by exporting to encore from the projects again. This seemed to work - but with the big master project I have tried several times with no luck.
Can anyone help me fix this issue? :)

Yes, I got this too:
For posterity, here is what I have found that completely fixes this error, repeatedly: Clear Encore's cache. Specifically:
Close your Encore project and exit Encore
Go to the cache subdirectory named for your project (ie. if your save file is c:\projects\mymovie.ncor then go to c:\projects\mymovie\cache)
Delete the file "mlf.cache.v10"
If your Encore project contains any Premiere Pro dynamically-linked assets, start Premiere Pro and load at least one of the projects used in Encore. (I have found that this reduces memory usage -- for some reason, Premiere Pro takes up less memory than if Encore spawns the PProHeadless.exe media server to serve the same function)
Restart Encore and load your project
...and wait, patiently, for Encore to re-scan all of your assets and build up the cache again and don't touch it until it's finished. I use Process Explorer (http://technet.microsoft.com/en-us/sysinternals/bb896653) to watch my disk activity and CPU to know when Encore is finished (just hover on the cyan-colored graph and you can see what program is performing the most disk activity). Once it's all finished, I save, then immediately try to build my project again. For proof of concept, my 40GB BD-50 project just built last night after getting this error yesterday afternoon.
If any of your assets are not transcoded before you begin this process, transcode them all, then start this process over again from step one. Clearing the cache does not clear the transcodes.
I hope this helps someone. I was not looking forward to completely re-authoring my project, which I've been working on (on and off) for a few months.

Error while deploying EAR : TLDs not found?

Hi all,
I encountered this error while trying to deploy an EAR using the NWDS for Netweaver CE 7.1.
C:\usr\sap\MIT\J00\j2ee\cluster\server0\temp\deploy\work\deploying\ohs.ear1239681726594\convertwarfile\FCKeditor.tld (The system cannot find the file specified)
I doublechecked the WAR inside the EAR file, and I found that the TLD is indeed in the WEB-INF directory of the WAR. This is the correct place to put it, yes?
Should I reference to it in some other place? or should I move the TLDs to a different directory?
Thank you for your assistance,
Rajendra

Hi, bojidar.
No I don't think there are multiple copies of the TLD in my archive. I suspect the problem lies on the fact that I imported the WAR from my tomcat deployment instead of building the archive directly from the Netweaver Development Studio. Some SAP specific deployment descriptors probably wasn't there.
I have switched to trying to deploy directly from the NWDS though, and although I still haven't managed to deploy successfully, the problem is now different. I'll post about it in another thread.

Asant command ..error C:\lib not found

I am using asant command compile and copy my files(servlets) ...but for some reason I am getting an error that says C::\lib not found can anyone tell me why I am getting this error

You need to set the j2ee.home property as described in the About chapter:
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/About.html#wp63740
-Ian Evans
Sun Microsystems
J2EE Tutorial Team

Urgent Help Req.: Exception=ORABPEL-11162 Error while reading native data

Hi All,
I am getting below error: Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7|http://forums.oracle.com/forums/] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
Let me also give you the brief scenario of what I am trying to achieve.
INTERFACE FUNCTIONING:_
I have an interface which reads the records in a file in a chunk through ChunkRead adapter and and after one successful reading if chunk it calls the DB adapter to insert the records in the table.
Now these records are committed and next chunk is read and the process goes on till all the records are read.
After this the API is called which does the processing of these records.
Inserting records in the DB is a XA transaction which means if anything goes wrong while inserting the data, the records which are added earlier are rolled back.
ISSUE:_
Now the issue comes when I do the negative testing. Since my file is based on fixed length schema., I change the length of last record from 15 to 13. (say total are 10 records)
Now what happens is when chunkread tries to read the record of 15 length it gets only 13 characters and hence ignores the records.
But the chunkread reads all other 9 records correctly and sends this to DB adapter which now inserts them correctly in the DB.
But being a global transaction I want that if any record is missing from DB in comparison to those in file then whole transaction should roll back.
So I am unable to make this whole process as global transaction. This is because the ChunkRead adapter inspite of detecting the error doesn’t throw it back.
Moreover if this problem occurs in say next chunk then also I am unable to find out how to rollback the whole transaction. Because the first chunk was correct.
So basically two concerns are there:+
How to detect that chunkread adapter has missed one record?+
Secondly, If it’s detected then how should I rollback the transaction that caused earlier records to enter into database?+
Please let me know if anyone has faced this issue earlyer and how it got resolved. Any pointers regarding this would be of great help.
Also attached is the chunkread log for reference.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage errList=[oracle.tip.pc.services.translation.xlators.nxsd.ErrorList@a5213b]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage badCount=[1]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.467-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Rejecting message fileName=/rh01/s01/n01/Distributions/B2B/Gentran/In/855/Test.txt, startLine=4, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
}</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
PFB the version details :
SOA suite version : 10.1.3.3.1 and JDEV : 10.1.3.3
Edited by: SOA Team on Oct 6, 2008 10:48 PM

Just a thought, you could set the terminator for the last field as {eol} instead of length, this means that it should read the last field regardless of the length.
Depending on the logic of Db adapter the error could be traped due to incorrect length.
If the file starts each row with a constant(s), e.g. 01 then you can terminate the previous line on that, this is the better option but relys on the file format.
The other option is a little thing call compensation, ouch. Basically this allows you to back out commited rows but you have to provide all the logic, it is generally something people avoid because of the complexity.
cheers
James

Error while startup: msvcrt.dll missing

Hi,
on some boxes (maybe windows 2000 ) we get a error while startup: msvcrt71.dll missing ...
whatÂ´s the problem ?

Andre,
since this is difficult to answer without a detailed description of the use
case, could you please post information about the how and what you are
trying to start, i.e. the command line, the operating system and what
version of JRockit you are using and have installed.
The file msvcr71.dll is needed by a few launchers and libraries inside the
JRockit JDK but those cases should be covered if launching using e.g.
java.exe. The only case that comes to mind is if you are trying to load the
jvm.dll directly, if that is the case you should copy
<jrockit-jdk>/jre/bin/msvcr71.dll to
<jrockit-jdk>/jre/bin/jrockit/msvcr71.dll to see if it helps.
Best Regards
/Robert
<Andre Frintrop> wrote in message news:[email protected]..
Hi,
on some boxes (maybe windows 2000 ) we get a error while startup:
msvcrt71.dll missing ...
what??s the problem ?

ORA-20100: Error occurred while processing: Function 'test' not found.

this program follow:
declare
p xmlparser.Parser;
xmlbuf varchar2(512);
xmlpat varchar2(512);
xmldoc xmldom.DOMDocument;
xmldocnode xmldom.domnode;
n xmldom.domnode;
begin
xmlbuf:='<emps><emp>odp</emp></emps>';
xmlpat := 'emps/emp/test()';
p:=xmlparser.newParser;
xmlparser.parseBuffer(p,xmlbuf);
xmldoc:=xmlparser.getDocument(p);
xmldocnode :=xmldom.makeNode(xmldoc);
n:=xslprocessor.selectSingleNode(xmldocnode,xmlpat);
--dbms_output.put_line('value of first selected node is:ok');
exception
when others then
raise;
end testxml;
message of error:
ORA-20100: Error occurred while processing: Function 'test' not found.
ORA-06512: at line 20.
please quick reponse.

Steve,
Yes it helps. I was able to finally figure this much out, however, in order to get the quotes to get handled right, I had to declare the xsl inline and I had to change (there quite a few, this just being an example) the following line from
<xsl:when test="normalize-space(string(sub_container_settings/initial_investment)) = ''">10000</xsl:when>
to
<xsl:when test="normalize-space(string(sub_container_settings/initial_investment)) = ''''">10000</xsl:when>
This works, but I would prefer to store the xsl in a CLOB. Neither of these work when I get the document from the clob and call the xmldom.parseClob procedure. The parser fails with an error that the document is not valid.
Do you have any idea on how to handle the single quotes in this circumstance.

ERROR[WSDL Parser] Attribute 'name' not found at: wsdl:documentation

Hello,
I'm currently having a problem generating the Java source code from a WSDL, because the WSDL2Service ant class bundled with the WLS install (in the /server/lib/webservices.jar library) does not comply with the WSDL XSD.
Check http://schemas.xmlsoap.org/wsdl/
Especially if you add a <wsdl:documentation> in your <wsdl:portType> you end up with a WSDLParser error, while the file perfectly validates through Eclipse:
     <wsdl:portType name="ImportPortType">
          <wsdl:documentation>
               Definitions of available operations through the webservice
          </wsdl:documentation>
          <wsdl:operation name="importData">
               <wsdl:input message="tns:ImportInput" />
               <wsdl:output message="tns:ImportOutput" />
          </wsdl:operation>
     </wsdl:portType> The error is:
[wsdl2Service] Generating web service from wsdl C:\Java\Workspaces\MyWorkspace/WebServices/wsdl/Import.wsdl
[wsdl2Service] weblogic.webservice.wsdl.WSDLParseException: ERROR[WSDL Parser] Attribute 'name' not found at:<wsdl:documentation>Definitions of available operations through the webservice
[wsdl2Service]           </wsdl:documentation>
[wsdl2Service]      at weblogic.webservice.wsdl.WSDLParser.getMustAttribute(WSDLParser.java:263)
[wsdl2Service]      at weblogic.webservice.wsdl.WsdlPortType.parsePortType(WsdlPortType.java:29)
[wsdl2Service]      at weblogic.webservice.wsdl.WsdlBinding.parseBinding(WsdlBinding.java:45)
[wsdl2Service]      at weblogic.webservice.wsdl.WsdlPort.parsePort(WsdlPort.java:46)
[wsdl2Service]      at weblogic.webservice.wsdl.WsdlService.parseService(WsdlService.java:37)
[wsdl2Service]      at weblogic.webservice.wsdl.WsdlDefinitions.parseDefinition(WsdlDefinitions.java:38)
[wsdl2Service]      at weblogic.webservice.wsdl.WSDLParser.visit(WSDLParser.java:71)
[wsdl2Service]      at weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:111)
[wsdl2Service]      at weblogic.webservice.tools.build.internal.WSDL2JavaServiceImpl.runClassgen(WSDL2JavaServiceImpl.java:210)
[wsdl2Service]      at weblogic.webservice.tools.build.internal.WSDL2JavaServiceImpl.run(WSDL2JavaServiceImpl.java:147)
[wsdl2Service]      at weblogic.ant.taskdefs.webservices.wsdl2service.WSDL2Service.doWSDL2JavaService(WSDL2Service.java:211)
[wsdl2Service]      at weblogic.ant.taskdefs.webservices.wsdl2service.WSDL2Service.execute(WSDL2Service.java:131)
[wsdl2Service]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[wsdl2Service]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[wsdl2Service]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[wsdl2Service]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wsdl2Service]      at java.lang.reflect.Method.invoke(Method.java:585)
[wsdl2Service]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[wsdl2Service]      at org.apache.tools.ant.Task.perform(Task.java:348)
[wsdl2Service]      at org.apache.tools.ant.Target.execute(Target.java:357)
[wsdl2Service]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[wsdl2Service]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[wsdl2Service]      at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
[wsdl2Service]      at org.eclipse.ant.internal.ui.antsupport.EclipseSingleCheckExecutor.executeTargets(EclipseSingleCheckExecutor.java:30)
[wsdl2Service]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[wsdl2Service]      at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:416)
[wsdl2Service]      at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:105)
[wsdl2Service]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[wsdl2Service]      at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
[wsdl2Service]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wsdl2Service]      at java.lang.reflect.Method.invoke(Method.java:585)
[wsdl2Service]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[wsdl2Service]      at org.apache.tools.ant.Task.perform(Task.java:348)
[wsdl2Service]      at org.apache.tools.ant.Target.execute(Target.java:357)
[wsdl2Service]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[wsdl2Service]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[wsdl2Service]      at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:38)
[wsdl2Service]      at org.eclipse.ant.internal.ui.antsupport.EclipseSingleCheckExecutor.executeTargets(EclipseSingleCheckExecutor.java:30)
[wsdl2Service]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[wsdl2Service]      at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:416)
[wsdl2Service]      at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:105)
[wsdl2Service]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[wsdl2Service]      at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
[wsdl2Service]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wsdl2Service]      at java.lang.reflect.Method.invoke(Method.java:585)
[wsdl2Service]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[wsdl2Service]      at org.apache.tools.ant.Task.perform(Task.java:348)
[wsdl2Service]      at org.apache.tools.ant.Target.execute(Target.java:357)
[wsdl2Service]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[wsdl2Service]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[wsdl2Service]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[wsdl2Service]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[wsdl2Service]      at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
[wsdl2Service]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[wsdl2Service]      at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
[wsdl2Service]      at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)
BUILD FAILED
C:\Java\Workspaces\MyWorkspace\EAR\ant\build.xml:22: The following error occurred while executing this line:
C:\Java\Workspaces\MyWorkspace\EAR\ant\build.xml:26: The following error occurred while executing this line:
C:\Java\Workspaces\MyWorkspace\EAR\ant\build_config.xml:65: weblogic.webservice.tools.build.WSBuildException: weblogic.webservice.wsdl.WSDLParseException: ERROR[WSDL Parser] Attribute 'name' not found at:<wsdl:documentation>Definitions of available operations through the webservice
          </wsdl:documentation> Digging through the WSDLPortType class (package weblogic.webservice.wsdl ) decompiled code, I clearly saw this kind of parsing does not respect the WSDL XSD:
public class WsdlPortType {
    public WsdlPortType() {
        operations = new ArrayList();
    void parsePortType(WSDLParser wsdlparser, XMLNode xmlnode, Port port) throws WSDLParseException {
        Iterator iterator = xmlnode.getChildren();
        do {
            if(!iterator.hasNext())
                break;
            XMLNode xmlnode1 = (XMLNode)iterator.next(); // THE NEXT XML NODE IS NOT COMPULSORILY THE <wsdl:operation> ONE!!!
            String s = wsdlparser.getMustAttribute("name", xmlnode1);
            if(wsdlparser.canHandleMethod(xmlnode1)) {
                weblogic.webservice.Operation operation = port.addOperation(s);
                WsdlOperation wsdloperation = new WsdlOperation();
                wsdloperation.parseOperation(wsdlparser, operation, xmlnode1);
                operations.add(wsdloperation);
        } while(true);
    private ArrayList operations;
} X-(
Edited by maxxyme at 03/13/2008 10:34 AM

I created a new project and tried to repeat the steps to import. Still getting the same error.
This is my Message type definition if that helps
<message name="Composite_Weather_ServiceRequestMessage">
          <part name="payload" type="tns1:NDFDgenRequest"/>
     </message>
     <message name="Composite_Weather_ServiceResponseMessage">
          <part name="payload" type="tns1:NDFDgenResponse"/>
     </message>

Why wlserver_10.3\server\lib not found?

Hello, I was following a cue card in Jdev to install the database schema when I got this error:
BUILD FAILED
C:\Documents and Settings\hb\My Documents\Downloads\FusionOrderDemo_R1PS3\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
C:\Documents and Settings\hb\My Documents\Downloads\FusionOrderDemo_R1PS3\Infrastructure\DBSchema\build.xml:91: The following error occurred while executing this line:
C:\Documents and Settings\hb\My Documents\Downloads\FusionOrderDemo_R1PS3\Infrastructure\DBSchema\build.xml:56: The following error occurred while executing this line:
C:\Documents and Settings\hb\My Documents\Downloads\FusionOrderDemo_R1PS3\Infrastructure\DBSchema\build.xml:28: C:\Oracle\Middleware\jdeveloper\wlserver_10.3\server\lib not found.
Line 28 is this:
<sql driver="${jdbc.driver}" url="${jdbc.url}" userid="@{username}"
password="@{password}" classpathref="oracle.jdbc.path"
src="@{script}" onerror="@{onerror}"/>
So does this mean the JDBC driver path is incorrect? I have installed the whole JDev suite and Oracle 10g XE, so I guess the driver is not missing? How can I check this? Thank you.

Out of the box, build.properties doesn't have those entries. I have followed these cue card steps before, on another machine, and it worked right out of the box. Does this have anything to do with the environment variables like ORACLE_HOME, ...?
Here's build.properties:
# Base Directory for library lookup
jdeveloper.home=C:/Oracle/Middleware/jdeveloper/jdeveloper
src.home=..//..
# JDBC info used to create Schema
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:oracle:thin:@localhost
jdbc.port=1521
jdbc.sid=XE
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=FOD
db.demoUser.password=fusion
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

Error:"Add on executable file not found"

hi
How to solve
"Error:"Add on executable file not found"" while adding add ons in sap b1
Edited by: Philip Eller on Jun 16, 2008 10:13 AM
Edited by: Philip Eller on Jun 30, 2008 10:02 AM*

Hello Neetu,
Are you installing the XLR? if yes, when choose SQL server, please
Type a wrong servername first, then you will be able to get to an advanced
dialogue. Enter the correct name with username and password and then go on
to see if it works.
Kind Regards,
Maggie Zheng
SAP Business One Forum Team

Getting idoc error - Entry in outbound table not found- in outbound scenari

hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problem

Hi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas.

"Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16

While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
"Error in function: Add Table not found [131-183]"
SAP B1, 2005B, PL 39.
It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
This is very urgent kindly help me out.
Edited by: Philip Eller on May 16, 2008 8:50 AM
Edited by: Philip Eller on May 30, 2008 8:41 AM*

Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple

RWB:Error when sending message: 404 Not Found

Dear all,
"i am getting error: Error when sending message: 404 Not Found"
while testing from rwb > Component Monitoring > Non-Central Adapter Engines > Adapter Engine AIPID > test message >
with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
and my id comm channel > target host > bid.xxx.com with service no
(adapter type: xi
adapter engine: Integration server
address type: url address
target host: bid
service no: 8000
path: /sap/xi/engine?type=entry
i am working in nw2004s system)
while testing cache connectivity test from rwb > Component Monitoring
i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
green: Integration Repository
green: Integration Directory
green: Integration Server - JAVA
red:Adapter Engine af.axd.aipid
yello:Integration Server - ABAP
Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
what should i do?
best regards,
dushyant.
refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
and
SXI_CACHE
@8O@ Error during last attempt to refresh cache
LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
Smq2 = 0
Sm58 = 0

Hi,
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Cheers
Manish

MSMQ BC - Error while Startup- Native Lib not found

Similar Messages

Maybe you are looking for