MTRRs error on installing esxi5.5 within virtualbox

Hi Guys,
I encountered an MTRRs error while I was trying to install esxi 5.5 within a VirtualBox (ver 4.3.20) which runs on CentOS 6.6.
The vbox settings are:
        Type: Linux
        Version: Linux 2.6/3.x (64bit)
        RAM: 4096MB
        CPU: 2core
The iso was bootable, but hanged with purple screen and mentioned about: No variable MTTRs: assuming ESX is running in a VM.
How can I get rid of the problem? Thank you!

I suspect that the issue is an unimplemented MSR in VirtualBox--one that should be available on the CPU in your CentOS machine, but not on the CPU in your Ubuntu machine.
If that's the case, the two solutions that come to mind are (1) configuring VirtualBox to ignore unimplemented MSRs or (2) configuring VirtualBox to report a different CPU model, that doesn't support the MSR in question. Based on the PSOD, I'm guessing that the MSR is 130H, CPUID1_FEATURE_MASK, described in http://www.intel.com/content/dam/www/public/us/en/documents/application-notes/virtualization-technology-flexmigration-application-note.pdf.
If you boot ESXi with the additional vmkernel option "vmbASLR=FALSE" and post an image of the PSOD, I can confirm my guess.

Similar Messages

Use native ArchLinux within VirtualBox - X Server Problems

Hi everyone!
I followed the Wiki Entry here:
https://wiki.archlinux.org/index.php/Vi … ical_Drive
to use the natively installed Arch within a VirtualBox on Win 7.
So far, I can boot into Archlinux - but the XServer cannot start, because there are some Errors, that the XServer failed to load the NVIDIA Modules.
The Wiki entry also mentions this kind of Problem and suggests a solution to use a second xorg.conf for usage with the VirtualBox.
But right now I do not really have an idea how to load an individual xorg.conf?
And how this xorg.conf should look to use the VirtualBox graphics card?
ArchLinux is installed on a Notebook with a NVIDIA Quadro NVS 3100M and I'm using the proprietary NVIDIA drivers (if I boot natively in Arch, which works fine).
Also I would be grateful for any other solution, if someone has successfully started a natively installed Arch in VirtualBox and has the proprietary NVIDIA driver installed.
Thanks in advance!
Kind regards
PhiGamma

Hello everyone!
There was a NVIDIA specific xorg config file I forgot which was needed for brightness control. I renamed the file and then it was possible to start the X-Server within VirtualBox. But there seems to be a problem with the VirtualBox 3d support and the NVIDIA drivers (eventually due to libgl?). I switched to Nouveau then and everything works fine. I can use 3d support in both cases, VirtualBox and native (I unfortunately need the 3d support for Gnomeshell...).
But personally, I would prefer the NVIDIA Driver, because of the power control facilities which Nouveau lacks right now.
Does somebody know a way to use the NVIDIA Driver an has 3d support within VirtualBox?
Thanks in advance!
Kind regards!
Last edited by PhiGamma (2011-11-07 14:42:42)

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

Error while installing Oracle 10g on Solaris 9 x86

Hi all,
I got several error after install oracle 10g. After I run the root.sh. It prompt :
Starting Oracle CSS service under init(1M)
Expecting the CRS daemons to be up within 120 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
and when I start sqlplus, it prompt:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Intel SVR4 UNIX Error: 2: No such file or directory
and following the error message prompt every minutes.
"oracle: (Oracle CSSD will be run out of init)"
"root: Failure in CSS initialization opening OCR."
I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
Cheers,
Alex

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Error while installing addon in Citirx environment

Hi,
We are getting the following error while installing our addon in Citrix environment.
CustomerLibrary: Error during Addon Installation Object reference not set to an instance of an object.
The addon runs from within SAP and after the error we can see the addon in Add-Remove programs in Control panel but cannot see it in the Addon administration window in SAP Business One. So it appears that there is problem with communication with SAP during the setup.
Does anybody know how this can be resolved?
Thanks,
Aparna

Hi Arpana,
I get this error on a Terminal Server or Citrix Server if the add-on installer was written using the B1DE. Is the installer written using the B1DE? If so, you can get around this issue by creating a new installer. There are 2 installer wizards that come with the B1DE, 1 of them will work on a Citrix Server and the other won't (...in my experience). The one that works is the more basic one...sorry, I don't have the B1DE available at the moment so I can't give you the exact project names.
Hope this helps,
Owen

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Error in installing TestStand 2012

Hi,
I am seeing strange error while installing TS 2012. The attached files shows the error. My system has P4 processor with 2 GB memory and Win XP is the OS. Please help me in installing TS 2012.
Thanks
Attachments:
1.JPG ‏13 KB
2.JPG ‏22 KB
setup.ini ‏33 KB

Hi,
Installer Error 1106 are caused by misconfigured system files within the OS if I am not wrong. You could try this:
http://www.almuseo.com/1106-error.php
Before that, also try the alternate setup.ini file provided. Replace your setup.ini with this and try the installation.
Attachments:
setup.ini ‏33 KB

Error in installing GWPA

Hii I want to install GWPA in my eclipse. I have installed android sdk.But i am getting the following error , while installing GWPA
I have used the following document for installing GWPA
How to install Gateway Productivity Accelerator (GWPA) plugin for Integration Gateway
Error:-
Cannot complete the install because of a conflicting dependency.
Software being installed: Toolkit for Integration Gateway (GWPA, Developer Edition) 1.1.1 (com.sap.odata.dt.framework.sap.smp.feature.feature.group 1.1.1)
Software currently installed: Eclipse IDE for Java EE Developers 1.5.0.20120614-1633 (epp.package.jee 1.5.0.20120614-1633)
Only one of the following can be installed at once:
    OSGi System Bundle 3.8.0.v20120529-1548 (org.eclipse.osgi 3.8.0.v20120529-1548)
    OSGi System Bundle 3.8.1.v20120830-144521 (org.eclipse.osgi 3.8.1.v20120830-144521)
    OSGi System Bundle 3.8.2.v20130124-134944 (org.eclipse.osgi 3.8.2.v20130124-134944)
Cannot satisfy dependency:
    From: SAP Mapping Editor 1.11.0 (com.sap.it.ictools.feature.feature.group 1.11.0)
    To: com.sap.it.ictools.mapping.ui [1.11.0]
Cannot satisfy dependency:
    From: SAP Mapping UI 1.11.0 (com.sap.it.ictools.mapping.ui 1.11.0)
    To: bundle org.eclipse.osgi 3.8.2
Cannot satisfy dependency:
    From: SAP Integration Tooling Commons Base 1.11.0 (com.sap.it.ide.commons.base.feature.feature.group 1.11.0)
    To: com.sap.it.ictools.feature.feature.group [1.11.0]
Cannot satisfy dependency:
    From: SAP Integration Tooling Commons 1.11.0 (com.sap.it.ide.commons.feature.feature.group 1.11.0)
    To: com.sap.it.ide.commons.base.feature.feature.group [1.11.0]
Cannot satisfy dependency:
    From: Toolkit for Integration Gateway (GWPA, Developer Edition) 1.1.1 (com.sap.odata.dt.framework.sap.smp.feature.feature.group 1.1.1)
    To: com.sap.it.ide.commons.feature.feature.group 0.0.0
Cannot satisfy dependency:
    From: Eclipse IDE for Java EE Developers 1.5.0.20120614-1633 (epp.package.jee 1.5.0.20120614-1633)
    To: org.eclipse.epp.package.jee.feature.feature.group [1.5.0.20120614-1633]
Cannot satisfy dependency:
    From: Eclipse e4 Rich Client Platform 1.1.0.v20120521-2329-8yFTIGF3GGduEYqkQB9M3DKn (org.eclipse.e4.rcp.feature.group 1.1.0.v20120521-2329-8yFTIGF3GGduEYqkQB9M3DKn)
    To: org.eclipse.osgi [3.8.0.v20120529-1548]
Cannot satisfy dependency:
    From: Java EE IDE Feature 1.5.0.20120614-1633 (org.eclipse.epp.package.jee.feature.feature.group 1.5.0.20120614-1633)
    To: org.eclipse.platform.feature.group [4.2.0.v20120608-135145-9JF7BHV8FyMteji0Oi_ePMz0xuZ8TVo7lV0z0ecb]
Cannot satisfy dependency:
    From: Eclipse Platform 4.2.0.v20120608-135145-9JF7BHV8FyMteji0Oi_ePMz0xuZ8TVo7lV0z0ecb (org.eclipse.platform.feature.group 4.2.0.v20120608-135145-9JF7BHV8FyMteji0Oi_ePMz0xuZ8TVo7lV0z0ecb)
    To: org.eclipse.rcp.feature.group [4.2.0.v20120528-1648-7IAPA7BrHQicRpNdOz-Obz-rlRCA]
Cannot satisfy dependency:
    From: Eclipse RCP 4.2.0.v20120528-1648-7IAPA7BrHQicRpNdOz-Obz-rlRCA (org.eclipse.rcp.feature.group 4.2.0.v20120528-1648-7IAPA7BrHQicRpNdOz-Obz-rlRCA)
    To: org.eclipse.e4.rcp.feature.group [1.1.0.v20120521-2329-8yFTIGF3GGduEYqkQB9M3DKn]

can you set proxies in eclipse as well.
Go to Window>Preferences in Mobile Workspace
Preferences box prompt out, choose "Network Connections"
Select "Manual" from Action Provider in the drop-down
Select "HTTP" >Click on "Edit"
Provide required proxy details with port number.
Refer this blog:
How to bypass proxy settings in SMP workspace for connecting any public Web Service within corporate Network
Rgrds,
JK

Error while installing Identity Minder 6.0 on weblogic Application server8.

Hi,
I am getting the follwing error while installing Netegrity Identity Minder 6.0 on weblogic Application server8.1:
java.lang.UnsatisfiedLinkError: javaagent_api_init
at netegrity.siteminder.javaagent.AgentAPI.javaagent_api_init(Native Method)
at netegrity.siteminder.javaagent.AgentAPI.init(AgentAPI.java:488)
at com.netegrity.ra.policyserver.impl.PSManagedConnectionFactory.createManagedConnection(PSManagedConnectionFactory.java:200)
at weblogic.connector.common.internal.ConnectionFactory.createResource(ConnectionFactory.java:127)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1145)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1079)
at weblogic.common.resourcepool.ResourcePoolImpl.setInitialCapacity(ResourcePoolImpl.java:739)
at weblogic.connector.common.internal.ConnectionPoolManager.updateInitialCapacity(ConnectionPoolManager.java:495)
at weblogic.connector.common.internal.ConnectionPoolManager.preparePool(ConnectionPoolManager.java:140)
at weblogic.connector.deploy.Deployer.preparePool(Deployer.java:618)
at weblogic.connector.deploy.Deployer.prepare(Deployer.java:230)
at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:248)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:3142)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1583)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1227)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1070)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2513)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2463)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2379)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:866)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:594)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:508)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
--------------- nested within: ------------------
weblogic.management.ManagementException: [Deployer:149233]An unexpected error was encountered during the deployment process. - with nested exception:
[java.lang.UnsatisfiedLinkError: javaagent_api_init]
at weblogic.management.deploy.slave.SlaveDeployer.convertThrowable(SlaveDeployer.java:1017)
at weblogic.management.deploy.slave.SlaveDeployer.access$500(SlaveDeployer.java:124)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2395)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:866)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:594)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:508)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
No Exception Messages
Any suggestion in this regard will be help ful.
Thanx in Advance ,
Anshita
Edited by anshita at 03/27/2008 11:47 PM

Hi Seetharam,
I am getting the same issue when trying to install a different BI application in Solaris sparc 64bit environment. Were you able to resolve the issue?? If so, could you please explain what the problem was and how you resolved it.
Thanks

Error when installing Media Sync

I just got my first BlackBerry (Bold with v4.6.0.162) and am in the process of installing the destop software as outlined in this post:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
I've installed the USB drivers, the Desktop Manager without Roxio Media Manager and was moving on to the installation of the Media Sync tool.
When installing from within the Desktop Manager it stops working and shuts down.
When installing from the downloaded BlackBerryMediaSync.exe file, I receive the following error message:
"Setup could not locate the Software License Agreement information. Setup cannot continue and will now exit."
I'm working with a Dell, Vostro 1510, Vista Basic. I've tried "run as administrator" and also when logged on as the administrator with the same results.
Any thoughts or assistance will be greatly appreciated as I've not been able to track down this problem anywhere.

Hi lighthouse007:
Can you install Media Sync as a stand alone product? (http://na.blackberry.com/eng/services/media/mediasync.jsp)
Does it work if you launch it outside of Desktop Manager after you do this? Does it work if launched from within Desktop Manager?
Cheers
M
Need additional information on BlackBerry products?
visit: http://www.blackberry.net

Error: The installed graphics card does not meet the minimum system requirements by Aperture

I have a Mac Pro 3.1 10.5.8 and Aperture 2.1.4. My NVida 8800gt with 512 mb was over heating so I brought and install the ATI radeon hd 5770 to replace it. Now when I try to start Aperture I get this message "Error: The installed graphics card does not meet the minimum system requirements by Aperture". All other software works fine, ie photoshop elements and Safari. When I install my old card aperture will open with no problem, but of course the card will overheat within 10 mins and I will have no video. I have search on google with no luck. Will upgrading to Aperture 3 fix this problem?

5770 requires 10.6.5.
The 8800GT - there is the 350* bake in over 10 minutes - 50% or better chance
you can find 8800GT on http://myworld.ebay.com/macvidcards/
http://www.macupdate.com/info.php/id/23049/smcfancontrol
http://www.bresink.com/osx/HardwareMonitor.html
Fan control helps with FBDIMMs which need to be kept under 70C too.

Installing arch under virtualbox - cannot open default display & stuff

hi!
this is not my first time I try to install arch under virtualbox, and the results I get are the same.
Installation was pretty obvious: installed arch, added user to lp,wheel,games,video,audio,optical,storage,scanner,power,users groups, installed xorg (all group), installed virtualbox-guest-utils, added vboxvideo vboxsf and vboxguest to /etc/modules-load.d/virtualbox.conf. Also installed mesa and xf86-video-vesa.
Then I edited .xinitrc and added there /usr/bin/VboxClient-all line.
In result, when I try to launch X by typing startx, desktop changes resolution to a bigger one, then blank screen and the resolution changes back to previous, displaying the following:
If I try to launch any de (like bspwm or xfce4) I het a message saying "Can't open the default display".
The weirdest part is that if i change user to root, I can startx and the ugly twm will start, but if I try to launch de, I get the same error message.
Now, what have I missed during the installation which in result gives me what I get?
Thank you.

Trilby wrote:Please post your actual .xinitrc. The output in your screenshots indicates that X exited normally, without error. In other words, nothing went wrong, it did what it was told to do, you just likely have not told it to do what you want.
good thing is that i actually installed xfce4 and uncommented the corresponding line in the .xinitrc and the xfce4 launced successfully. Maybe I was frustrated because under root I got something, and under user - failures.
The bad thing is that when I want now to launch bspwm with the following .xinitrc
I get a completely black screen with no response

OEL support within VirtualBox

Hi,
We were wondering, we have an x4170 server with Oracle Premier support. Oracle Enterprise Linux and Solaris are supported. We currently run Solaris as the host OS, and we're wondering if a guest Oracle Enterprise Linux OS would be supported while running within VirtualBox? Or put simply, does being a guest OS invalidate support for said OS, which is in this case OEL?
Cheers,
Tyler

Thanks again for the reply.
In all truth, aren't they the same? Just trademarks switched around, etc? If its not certified, though, then we are forced into it.
I was just following your blog post about OEL 5.3 with oracle database. I downloaded oracle database 11.2 onto OEL 5.3 on x4170, but when I brought up the installer, it was insanely slow. It took like 2 minutes to enter email address and password, and the next button disappeared and wouldn't reappear so I couldn't go any further (JRE related????). I then ran top, java was using 100 to 200% cpu, the graphics server was 70 to 90% cpu, etc. I was wondering if our problems would go away with another os that would allow us to update packages for free. But even on your blog, did you run up2date before installing oracle database?
Or perhaps its safe for us to upgrade to OEL 5.5? Redhat only certifies the x4170 server to OEL 5.3, though. I suppose I'll try OEL 5.5 tomorrow while we wait and see if we can't get a ULN csi (our local reps don't seem to have their act together due to the sun to oracle transition, we're part of a university as well so we may have a site license for it--fingers crossed).
Cheers,
Tyler
Edited by: tfunk on Aug 12, 2010 5:18 PM

Error while installing OWB

Error while installing OWB
after 50% install.. it says
"Error in writing to file c:\oracle\ora9201\bin\oci.dll
The process cannot access the file because it is being used by another process"
Apparently I have restarted the workstation and closed all oracle related services in services and no other program is running expect the installer.
Can any one help in resolving the issue. Or can I hit the ignore button and continue installing?

Always install OWB into a new ORACLE_HOME unless the Installation and Configuration Guide states otherwise. This has only happened twice. OWB 9.0.2.62.3 was the last version to allow installation into an existing ORACLE_HOME. Another thing you can do is go to www.sysinternals.com and download the utility LISTDLLs. It is great. From a command prompt, start it with the syntax: listdlls >log.txt
This will output the DLLs in use and which executable is using it. Search for the DLL in the log.txt and scroll up until the double line. The executable name locking the DLL will be above the double line. If you have the Microsoft Distributed Transaction Coordinator Service running on the client, it will lock Oracle DLLs. This has been a common issue in the past, going back to the days of Data Mart Suite. This was documented in the Release Notes for it and may still be in the system in a note somewhere. It is in: DMS: Unable To Install; Filesopen/Service Running On Compaq Server Doc ID: Note:1080977.6 and Certain Files which need to be Reinstalled are Being Used Doc ID: Note:117672.1
The first note I wrote back before 2000.
Barry

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

MTRRs error on installing esxi5.5 within virtualbox

Similar Messages

Maybe you are looking for