MTU Setting Is Too Low

I cannot connect to xbox live because of this, all of my computers work fine but my xbox will not allow me to connect to live being the MTU is too low.. I,ve done countless power cycles and I've called both linksys and xbox live support. If anyone has any idea on how to help, please don't hesitate to post.

I have the same problem Im using the Wrt54G linksys wireless-g router, changed the MTU to 1365, and am failing the xbox live mtu test. The router was fine at 1500, when I had my old motorola surfboard modem, I traded in for a newer model the Sb5120. And so far, no xbox. Dont know what else to do. Xbox customer support is a joke. Comcast is a joke. I dont know how to change the MTU setting on the modem, don't think thats the problem anyway its default is 1500.
I have the modem going to the router, the router going to the xbox 360. No xbox live tho. Reset everything multiple times. So now Im asking you guys for your help. Im gonna call comcast tomorrow see what they have to say, even tho the people there are monkeys with typewriters.... I should have never switched modems....

Similar Messages

Max volume still too low...

After replacing the hard and reinstalling OSX the volume setting is too low. With volume turned all the way up it produces about half the sound of another identical computer playing identical music.
Ballance is centered and all volume bars are in their full to the right position.
Is there any way to increase the system volume beyond the OS max or reset the volume base?

Maybe one of the speakers is blwon up. Either that or a drive has gone corrupt in which case maybe you should do and archive and install re-installation of the OS.

I set all audio gain too low - any way to up it for an entire project quickly?

I have been working on a project and have been setting the audio gain levels a little too low during edit. It's a lengthy project and I wondered if there was an easy way to en mass up all the gain levels at once.
The Matser mixer slider is already high - so I wondered if it was advisable to maybe select ALL audio at once and use the normal Audio Gain right click menu to say up ALL at once?
Is there a better way to do this - will this work?
Thanks in advance.

Lots of ways,
Add a volume effect to the master fader in the track mixer.
The one I would use would be a dynamics effect, added, once again in the effects section of the master fader. Use the gain make-up control in the compressor to make it louder and set the limiter control to -2db to catch any peaks.

Audio level output too low, even if set to maximum

OS: Windows XP Professional Service Pack 3-Build Lab: 2600.xpsp_sp3_gdr.080814-1236
Audio driver: SoundMAX Integrated Digital HD Audio - Analog Devices - Driver date: 08/02/2008, Driver version: 5.10.1.5520
The audio level output is too low, even if setting the output for all sources to the maximum level.
Does somebody have the same problem?
Need your help to see how to correct this and return to a normal operation!
Thank you very much in advance for your help and answers.

Additional informations:
Tested with the audio driver found at Lenovo's website, without any success.
After this was done, the audio driver was updated also without success too.

Too low IP mtu vs ethernet mtu

Hello,
If the switch gets packet on interface and the packets MTU is bigger, so it will constantly drop the packet ?
now:
If the router gets bigger packet that its IP MTU, the router has an option to fragment the packet?
Do i'am right ?
Thanks!

I have the same problem Im using the Wrt54G linksys wireless-g router, changed the MTU to 1365, and am failing the xbox live mtu test. The router was fine at 1500, when I had my old motorola surfboard modem, I traded in for a newer model the Sb5120. And so far, no xbox. Dont know what else to do. Xbox customer support is a joke. Comcast is a joke. I dont know how to change the MTU setting on the modem, don't think thats the problem anyway its default is 1500.
I have the modem going to the router, the router going to the xbox 360. No xbox live tho. Reset everything multiple times. So now Im asking you guys for your help. Im gonna call comcast tomorrow see what they have to say, even tho the people there are monkeys with typewriters.... I should have never switched modems....

Price too low - Invoice is not blocked...

Dear,
Probably you all know that invoices can be automatically blocked for payment based on the tolerances set up in customizing. When the price is too high, the system acts like expected, but when the price is too low, we don't get the preferred result. You get a warning message, but no payment block. It would be nice if the invoices with a "price too low" are blocked too.
We don't like to park them, because we work with a scanning procedure, so all invoices have to be posted immediately in the finance department, otherwhise it's very difficult to follow - up...
The purchasing and stock department are solving all the issues (qty and price differences) based on the list in MRBR. If the invoices with incorrect contracts are not in the list, this can give some problems. I've asked the finance people to block the invoices with a lower price manually, but for them this way of working is a little bit annoying...
Does anyone know how to solve this problem? Is there a BADI or user exit (or customizing parameter)?
Thanks in advance!
Kind Regards,
Lien

Please note the following:
The system will check the lower tolerance limit but an invoice will
never be blocked if the LOWER limit is exceeded. The system will only
display a warning message. In the standard system invoices will only be
blocked if the UPPER limit is exceeded because normally one wants to
prevent to pay more than expected.
In SAP Library: MM-Invoice with Variances-Tolerances you will also
find the following explanation:
".. If the variance is outside the tolerance limit, the system displays
this in a warning message. If you do not adjust your entries, you can
still post the invoice. If, however, the upper tolerance limit is
exceeded, the system automatically blocks the invoice for payment."
If this is an issue, message M8084 and M8085 can be customized as
error messages, as a work around. Please transaction OMRM
(spro -> materials management -> logistics invoice verification ->
Define attributes of system messages here you can set message 084 to
error)
You may also want to see the user exit exit_saplkont_002,
enhancement MM08R002 for blocking.
I hope this information will answer your query.

Pop up window saying Memory is too low to continue in Logic.Why?Way to Fix?

I recently purchased my IMac OSX 10.6.3 as well as Logic. I have about a half dozen projects on my hard drive now, which is also being backed up to a "time machine" external drive. The projects are pretty small( just piano, or piano and string quartet, etc.) I also just installed Office Suite for Mac and the full Adobe Creative Suite.
Recently when I have been working in the Score Editor(In Logic Pro 9), a pop up window appears saying something to the effect of "memory is getting low, don't install more plugins and remove any unused ones." Then today, after that pop up, another one showed up and said "memory is too low to continue. we will close project, autosave, etc. etc."
Why is this happening? Is there not enough memory on my computer? Will this actually effect editing procedures in Logic? (because it seems like some things aren't working like they used to) Is there a quick and easy fix? Is this related to space remaining on hard drive, or is it completely different? Could it be related to the IMAC backing up files to my "time machine" drive at the same time I am working in LOGIC?
Could someone who has a little time on their hands please answer these questions IN DETAIL? I am new to MAC and LOGIC, so I really have no Idea what's going on with the memory issue. I don't even understand how MEMORY corresponds to available space, quality of running programs, etc.
Please help. I'm working on a deadline to finish a Master's portfolio and this could potentially be a big bump in the road for me.
Thanks....

The System Requirements for Logic Studio call for a minimum or 1 GB RAM with 2 GB recommended. So you should not have a problem with your 4 GB.
First make sure your RAM is being recognized by your computer. Go to Apple Menu (apple in upper left hard corner and click on "About this Mac". Make sure it say 4 GB. Ram chip at times will go bad or become unseated.
Now for troubleshooting, here is what I would do. The next time you want to use Logic, restart your computer. Restarting "flushes" the RAM; it may not sound like it but that is a good thing. Then do not open any other programs other than Logic (except ones you may need for it). You listed an awesome group of software you own. Your computer is not set up for all these programs to automatically start up when you turn on the computer, is it??
So I am betting that you will not get the low memory message when only Logic is working. With some trial and error you will be able to open more and more programs at the same time without effecting Logic.
You can better understand your RAM by opening Activity Monitor (Applications >> Utilities >> Activity Monitor). Click on the System Memory tab at the bottom and you can visualize what your RAM (Memory) is doing. There is also a list of programs that are open and what resources they are sucking up.
Good luck with your computer and your masters.
Arch

Volume too low on ringer and with hands-free headsets

Both the ringer's volume and the volume within headsets are too low in my new Droid X. When holding it to my ear while talking it is loud enough well below max volume, but hearing people through headsets while driving is often too low with all volumes set to max (on loud freeways, for example). I usually keep my phone's ringer on silent vibrate, but it would be nice to be able to turn it up louder when the phone is sitting on a desk at home. Cell phone ringers can be obnoxiously loud, but there are times when people need to have them turned up.
Because it is an issue in both the ringer speaker and the jack for wired headsets, it seems like there is a good chance of getting a software fix to raise the max volume levels. Reading posts on forums, it seems clear that this problem is widespread in most, if not all, Droid X devises.
If you are having similar problems, please take a moment to call both Verizon and Motorola with a polite report of the issue. I spoke with both today and they said they were aware of the issue, and the tech at Motorola said they were "looking into" a software fix for it. If enough people call and report it, we have a better chance of getting a fix sometime soon.
Verizon's support line is: (800) 922-0204.
Motorola's is: (800) 734-5870 (I chose #6 for "other issues" a couple of times after routing into Droid support to get a live tech)
It can be frustrating to filter through the support systems and report it, especially if they tell you to try obvious things like rebooting the phone and turning the volume up, but it really is the only way to get them to fix this issue. Both techs I spoke with actually looked in their systems right away and acknowledged the issue is being reported by people.
Of course, if anyone has a real solution to this issue, please let us know what it is!

Thanks for the suggestion JKramer. I should have been more clear about having adjusted all volumes up in the settings screen. Assuming all sound options are located within the "Settings --> Sound & Display" screen, then yes, I have tried changing them. I have also tried changing the option to "use incoming call volume for notifications" under the "ringer volume" settings, after reading that someone had success in improving volume that way.
This issue is not a problem all of the time. It is only an issue when there is an elevated level of background noise, such as driving on the freeway, or having music or a movie playing in the room.
The phone is otherwise excellent! I live and commute in areas of very spotty reception (with all cell providers), and this phone will keep calls and not even have voices garble where my past two phones have consistently dropped calls in at least five problem locations. So far, everything else about it seems to work great!
Maybe some of these phones don't have this issue. Or, maybe the people who say they don't encounter the problem are lucky enough to live in relatively quite environments most of the time. In a quiet house or office, it is certainly loud enough. It just needs to have the option for increased volume when in noisy places. The issue is that its "max volume" settings are not as loud as with other phones.
Searching for something like "Droid X volume" will indeed show many people experiencing these same problems on various forums...

Drum loops are too low in volume vs guitars when overdubbing

After 8 hrs of learning Logic Express 9. I can't record the guitars "hot" because the Apple drum loops are too low in volume. I max them out with extra gain. I even duplicate them so I have two tracks. How can I get the drum loop volume up. I've tried everything I can think of to push it as loud as it will get. I've tried normalizing. I am assuming the quality of the guitar recording is related to how "hot" it's recorded or at least you shouldn't have to turn it down to about 20% when I overdub. I've got an M-Audio solo. Thanks.

Hi
Have you tried monitoring the guitars at a lower lever? You can still record them hot, but listen at a lower level.
From my LE8 manual...
Setting the Monitoring Level
If the Independent Monitoring Level (for Record Enabled Channel Strips) preference in
the Logic Express > Preferences > Audio > Devices > Core Audio tab is enabled, an
independent monitoring level is available when an audio channel is record enabled.
After arming the track, set the fader to the desired level. The original playback level will
be restored when the channel’s Record button is disabled.
Important: The Level fader only controls the playback (or monitoring) level, not the
recording level, when a track is record enabled. Recording levels must be set
externally—on your mixer, or at the original sound source. Care must be taken when
setting input levels, as digital audio will clip when overloaded. Clipping results in a
particularly harsh, metallic distortion, so unless you have a penchant for heavier
musical styles, overloading the inputs isn’t recommended (see “Understanding the Clip
Detector”
Cheers

Volume too low on Lumias

I previuosly owned a Lumia 800 and now a Lumia 920, and both have exactly the same problem...the earphone volume is just too low. Things are fine of you are hearing in a quiet room, but if you are walking or jogging in the street, the music volume at 30\30 is too low.
Nokia should get an iphone or ipod and compare, Hard too see how Nokia can sell itself as a music platform, yet produce sub par music devices.
I'm angry because of this. The Lumia 920 is an expensive device. Switching back to the iphone...

I love the Lumia 920 and the Windows 8 OS. I started off with the iphone, then to android, and now to windows 8 phone. However, there are certain things that should be left up to the consumer to control. Not everyone is the same, your hearing may be more sensative than another person. Since this is a Nokia issue, the volume should have been left to a volume level that will please everyone. I like listening to music loud especially when I am cutting my grass. It is annoying using a weed trimmer and I can hardly hear the music cause it is too low even though I have it at the max setting. The exteranl speaker is the same issue. 10/10 is rediculous. Everyone is always trying to control the way others do things and say things, express themselves, etc. It needs to be adressed and included in the next update.

Volume too low on album purchased on iTunes

I purchased an album on iTunes and when I burn to CD the volume is too low. I have done all suggest things to "enhance" the sound. All other items I have purchased are fine. It just seems to be this one album. Any suggestions. Is there a way to "repurchase-download" without paying.
Jenean

Craw4dm,
If you go to iTunes menu, select preferences and click on "playback" button you'll see a check box called "sound check". This enables the computer to adjust the volume of each track so that they all sound similar in volume. So no, you don't have to go through each track! Its a global setting of your music player.
I have it switched off at all times. I also have sound enhancer switched off at all times.
These features have no effect on volume (or anything for that matter) when you burn CD's.
As to the original poster, if the CD sounds quiet then that is how its supposed to be. If buy the CD in the shops it will sound the same. Note that there is big trend at the moment to make albums sound very loud using special processing at the mastering stage (when audio is prepared for album release). It is a trend that most "audiophiles" (or IMHO anyone with ears!) detest. Look up "loudness wars" or similar, on google.
Indeed the "sound check" facility in itunes is there to counteract the fact that CD's sound different in volume - a fact that is made all the worse by the record company practise I have just outlined!
I suspect the "quiet CD" just sounds more like it should do and its being compared to a CD thats been mastered overly loud.

I am using Pages to print addresses but they print too low on the envelope. How do I change this?

I am using Pages to print addresses but they print too low on the envelope. How do I change this?
Help please!!!
ANN

Hi Isk8ter,
Welcome to the Support Communities!
What version of Pages are you working with? I'm assuming '09 since you reference OS X 10.7.4 above.
I've included the link to the Pages User Manual for you below.
Page 253 starts the chapter on Printing, Shareing and Exporting your document.
Pages '09 User Manual
manuals.info.apple.com/MANUALS/0/MA663/en_US/Pages09_UserGuide.pdf
Setting the Paper Size and Orientation
Before you print, you should make sure the paper size and orientation are set the way you want by opening the Page Setup dialog.
To set paper size and orientation:
1 Choose File > Page Setup.
2 In the Page Setup dialog, choose the printer you will use from the “Format for” popup
menu.
3 Choose a standard paper size from the Paper Size pop-up menu.
Also, see page 266 of the Pages User Manual for more specific instructions for creating a custom template for envelopes.
Hope this helps ...
Judy

Volume is too low

I have Altec Lansing ADA745 plugged into my mac. The volume output is too low with all controls set to maximum. Any assistance or suggestions would be appreciated.

This low sound issue appears to be either driver related, or there is a low powered amp that drives the speakers in some of these laptops. When I use a headset the sound is extremely loud, so much so that I have to turn the volume level down. Uninstall the Realtek HD driver and let Windows install its own default driver and the sound level is much higher. People should forgo the Toshiba Realtek driver version and try using the very latest drivers from Realtek. For most it appears that when we enable "Loudness Equalization" through the Realtek HD Audio Manager the volume is significantly louder. It also helps somewhat to set the "equalization" to Powerful too. Realtek nor Toshiba have voiced a better solution to this issue. As such this is the best "fix" we have at the moment when using the internal laptop speakers.
My system sounds (DVD/Audio CD audio is a different story) on an L505 series laptop are much louder now that the "Loudness Equalization" is enabled along with the EQ set to "Powerful". One thing people should also check is that both the master volume level is set to 100% along with the audio slider or setting in program that is playing the audio on the laptop.

Headset volume too low

I just bought an iphone for wife, she said the earphone volume is too low, I have set the volume to max, any idea? Thanks Alex

The volume issue WAS a problem. Apple fixed it for most people a number of software releases ago. Most of the volume complaints stopped a long time ago after the fix. Now, with the 3G iphone, my volume is very loud and much better than even the fixed first version iphone. I think if you read the many initial reviews of the 3G version, most mentioned how much better the handset, speaker and speakerphone quality and loudness is. I know this is not solace for someone with a problem now, but I don't think it is widespread. You could just have a defective phone. Take it in the Apple Genius bar and see if they will get you a new one.

Too low ringtone n msg tone

hi
i recently bought nokia 3500 which is s40 3rd edition.... when i recieve a call or a msg the tone is very low... sumtimes itz really hard to hear it if ur standing in a place wid noises... so any1 can help me figure out how can i increase my tone level... i already set my tone volume to max n the ring style z "ringing"..
thx

Here's another suggestion -- MP3Gain
My comments on how to use it and where to find it are here: (link)
The instructions for using it to raise the volume are the same as the instructions posted there for using it to lower the volume.
One more thing.
At the top of screen, click on "Options" and you'll see this option:
"Don't clip when doing track gain"
When this is checked, MP3Gain will try to raise the volume as close as possible to the value you specified; but it will stop short of that value if that value will cause the ringtone to be distorted.
Omitting the checkmark will remove this restriction
Here is some advice on setting the clipping option I found:
http://forums.sonyinsider.com/topic/18810-mp3-gain/
"As [far as] setting the target, look at the clipping indicator (red "Y"). you want to target the highest number where the clipping is gone. I find the default 89 put the volume too low for my taste, but pretty much guarantee zero clipping. I find 90 or 91 is good enough in eliminating clipping most of the time."
If you want to apply MP3Gain to audio that you're going to use as music that you're going to listen to on your phone, here's advice on that matter:
http://forums.ilounge.com/digital-audio-formats/76598-mp3gain-usage-guide.html

MTU Setting Is Too Low

Similar Messages

Maybe you are looking for