Multi Client Configuration

Hi Guys,
I have installed OBI Server.
Now I have 3 developers who will work over RPDs.
I have installed client tool on all the developers machines.
I want all the clients to be configured to my server. i.e. When the Client Administration Tool is opened up by the developer, It should point to the same online repository that Server Administration Tool is pointing to.
What configurations do i need to change for this?
Thanks
Saurabh

Hi Saurabh,
Use the following approach:-
1. On the client machines, create system ODBC connections to point to the DNS/IP Address on the OBI Admin server machine. The driver used should be 'Oracle BI Server'. Say the name of the connction is Analytics_Server.
2. While opening the online RPD from client machines choose 'Analytics_Server' as the connection. (the popup will display two entries 'AnalyticsWeb' and 'Analytics_Server' )
This will connect you to the RPD on the server machine.
Regards,
Sudarshana

Similar Messages

  • Multi Client configuration of Talent Management

    Hi ,
      I need some help on configuration of Multi Client based scenarios of Talent Management areas of SAP HR. Can anyone tell me which are the tables of importance when dealing with this type of scenarios? In case some one has a document on this please send me the link.
    Regards,
    Abhishek

    Hai..
    CHECK SCC1 t code

  • How to create a multi-level configuration sales order?

    Hi,
        My client use configurable material to sell computers. And the production mode is MTO. One sales order item correspond with a production order
        Now my client also sell array which consist of two computers, two storage, one UPS power etc. That means I must realize multi-level configuration. First, choose the computer type. Second, based on the choosed computer in first step, choose the cpu, disk and so on. And then based on the sales order item, there must be several production order related to the same sales order item.
        Now I have semi-finished product B1,B2--computer. Class type is 300. Many characteristics is allocated to the class. B type material has the BOM which consist of cpu,disk etc.
        Then I created the finished product A--array. Class type is 300. Allocated characteristics is the B1,B2. A has the BOM which consist of B1,B2 etc.
        When I create sales order, I can only config the first level,choose computers for A, can not choose cpu,disk for computers.
        So, how can I find a solution for this scenario?
        Thanks in advance.

    Thanks, Waza
    1.  Does the Sales order BOM explode in the sales order?
    No. Just one top item would be ok for my client.
    2. Why do thy want this in the sales order?  They can explode the BOM in the production order, do they then need pricing at the component level?
    They do not need pricing at the component level. Exploding the BOM in the production order is acceptable. But how can I config the configurable material in components of production order?
    I tried collective order, but the second level of configurable material can not generate production order. I just make use of special procurement 52 in MRP2 of top finished product. Is there something I missed?
    Thanks again.

  • How to install Multi-Client Installation of Oracle Developer

    Could someone help me figure out the documentation on how to do
    a multi-client installation of Oracle Developer. I'm reading
    the section 1.3 in the Getting Started manual for Oracle
    Developer on NT. In trying to configure the OCSM host machine
    there are no entries for installing OCCM or OCSA in the Oracle
    Installer.
    Could someone instruct me as to the proper way to do this? The
    documentation just doesn't match the product.
    Thanks
    Ken
    null

    Sounds like a good idea! Could you email me a sample of
    the .reg file to edit. [email protected]
    Thanks!
    Jeff.
    elmo recio (guest) wrote:
    : Ken Pereyra (guest) wrote:
    : : Could someone help me figure out the documentation on how to
    do
    : : a multi-client installation of Oracle Developer. I'm
    reading
    : : the section 1.3 in the Getting Started manual for Oracle
    : : Developer on NT. In trying to configure the OCSM host
    machine
    : : there are no entries for installing OCCM or OCSA in the
    Oracle
    : : Installer.
    : : Could someone instruct me as to the proper way to do this?
    The
    : : documentation just doesn't match the product.
    : : Thanks
    : : Ken
    : I dunno if this will help. But the way we do things here is to
    : install oracle developer on the NT server, share the directory,
    : and then run a .REG file that set's up the user's registry data
    : as to where to point to for the OraWin directory. In this case
    : each time a user logs in via his remote machine he mounts a
    drive
    : letter (X, let's say) and the .REG points to all the orawin
    stuff
    : on that drive... so the client hasnt got to install it at all
    : except the .REG entry.
    : ciao, elmo
    null

  • Working with BW Multi Clients

    Hi.
    I know that in BW the System you work in has only one client for Configuring. In my case I need to create two clients for data purposes (have two different  not parallel projects), but I was thinking in creating these two clients for development purposes also, at the end the configuration is the same for the whole system, so if a user enters on client1 and another on client2, if one of them tries to modify one object, it becomes locked for the rest of the users.
    QUESTION: Have any of you worked in a Multi Client Landscape for BW? Is it possible to develop in one System using two different clients?
    Greetings.
    Jesús R. Cova Graffe

    Hi,
    As stated in the SAP link you can't effectively operate BW with 2 productive clients in one system. However data can be separated by means of authorization and/or splitting ODS'/cubes on organizational level (compcode etc.)
    In a technical point of view all generated objects like ods,cube, update rules, tables and structures are client independent objects. Here a 2nd client within BW won't help to support 2 "separate" development projects.
    In my experience it's best to put separate BW projects together on one dev box. In this way the developers are aware in an early stage when shared objects are hit. Before QA/Integration testing. From what i've seen and experienced it only saves time, and yes it is annoying.. because everyone has to play by the rules..
    Are there any questions left: ask,
    if you're satisfied, please reward.
    Kind regards, Patrick Rieken.

  • ISE 1.2 AUP Multi-Portal Configuration

    Currently we have ISE 1.2 configured using a multi-portal configuration.  We use a guest portal for both Guest Access and for devices we consider non-compliant employee.  Guest users are authenticated against an inernal user database in ISE, and the company owned devices auth against AD.  If we login with a guest account that was created using the sponsor portal, we do not get the acceptable usage policy to check before getting access. If we login using the AD account, we do get the Acceptable Usage Policy to check before getting access.  It appears this is the same portal, so why do we not get it for both?

    for guest AUP configuration
    AUP for posture assesment config

  • How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

    I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
    I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
    Server 2008, and I'm running 2012.
    Any suggestions or tips on how I can begin testing this with Server 2012?

    Hi,
    You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
    If you need a sample .wcx file I have posted one here a couple of times.  If you want I will look for it and post a link.
    -TP
    I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work.  And I'm not sure what I would need to do with or how to create a .wcx file.
    When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to: 
    https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

  • Error while crawling LOB contents in SP 2013:'Could not find default endpoint element that references contract in the ServiceModel client configuration section

    Hi,
    I created custom BDC Model using Visual Studio. In ReadList method i am getting data using Web Service call. Using this External Content Type (BDC Model) i created one external list and it is populating with data.
    I created one new content source in search service application using this BDC Model and when crawled this content source i am getting the below error.
    Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Runtime.RuntimeException MethodInstance with Name 'ReadList' on Entity (External Content Type) with Name 'Entity1' in Namespace 'bcsex.BdcModel1' failed
    unexpectedly. The failure occurred in method 'ReadList' defined in class 'bcsex.BdcModel1.EntityService1' with the message 'Could not find default endpoint element that references contract 'ServiceReference1.Service1Soap' in the ServiceModel client configuration
    section.
    I included the bindings and client end point configuration settings in web.config file located at
    \\Inetpub\wwwroot\wss\VirtualDirectories\Port_Number, but still getting the same error.
    Please help. Thanks a lot.

    The Issue resolved by including the bindings and client end point configuration settings in
    machine.config file located at C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\ and also restarted the server after config changes.

  • Need help in setting up a Multi Client chat server.

    I've been stuck at this problem longer than I should be, and it's starting to get to me.
    In my quest to learn more about networking in Java, I've decided to start with a simple multi client chat program. The problem is that I don't know exactly how to go about setting it up.
    I can't think of any way for multiple threads to be able to send data to the central server so that can then be sent to every other client, and also be able to request data and have it sent back just to the client that requested it.
    I think part of my problem might be that my knowledge of threads is somewhat limited, and that I might be overlooking or over complicating something.

    If you're trying to develop webapplications then I'm not too sure if SunONE 6.1 is the best platform considering that its support for jsp, servlets and the likes is rather outdated. Personally I'd look into http://www.sun.com/download/products.xml?id=446518d5 (Java webserver 7 rc3) if you wish to continue using a webserver with integrated java container.
    Otherwise you might benefit more from https://glassfish.dev.java.net (project glassfish), which is naturally also included in the http://java.sun.com/javaee (Java EE5).
    Just my 2 cents.

  • Issue with client configuration for CuciLync 9.2.5

    Hi,
    we are currently preparing the client configuration for CuciLync 9.2.5.
    When CuciLync starts we don't want to see the CuciLync window in the foreground.
    Therefore we use the 'hubvisible' setting.
    %APPDATA% \Cisco\Unified Communications\Jabber\CSF\Config\jabberLocalConfig.xml
    <userConfig name="hubvisible" value="FALSE"/>
    In addition we use this setting in the file
    ProgramFiles%\Cisco Systems\CUCILync\jabber-config-defaults.xml
    At first it looks like that the setting works fine.
    But CuciLync always resets 'hubvisible' to 'true'.
    Any idea what needs to be done to ensure that the setting is not overwritten ?
    Thanks in advance for your feedback
    Best Regards
    Carsten Lucy

    that might help
    http://mysite.voicebootcamp.com/index.php/free-video-labs/video/uc-collaboration-ccie-collaboration-chapter-4-1-voice-gatew

  • Oracle 11g client Configuration

    Hi All,
    I have Oracle 11g Server installed on my Linux box.
    I want to use Oracle client 11g on my windowsXP access to the Server that on my linux box.
    when i go to "Oracle-oraClient11g_home1","Configuration and Migration Tools", "Administration Assistant for Windows". I couldn't find the server that i want to add.
    Here is my client configuration on my windowsXP:
    tnsnames file
    # tnsnames.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORACLE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = "myoracle server name")(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    listener file:
    # listener.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = "it's my client Machine")(PORT = 1521))
    Sqlnet file:
    # sqlnet.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\sqlnet.ora
    # Generated by Oracle configuration tools.
    # This file is actually generated by netca. But if customers choose to
    # install "Software Only", this file wont exist and without the native
    # authentication, they will not be able to connect to the database on NT.
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
    My windowXp is joined to the domain (ex. zzz domain).
    Anyone who know and can help me about this, it will great.
    Thanks to forum.
    Marin

    1. On your Oracle client side, you don't need listener.ora file
    2. If you want to configure TNS Names on client, you run "Net Configuration Assistant" not "Administration Assistant for Windows"
    3. You will not see a server drop down list like SQL Server did. No matter your join the domain or not. You need to enter the server hostname, port and Service name manually.

  • Policy Based Routing with VPN Client configuration

    Hi to all,
    We have a Cisco 2800 router in our company that also serves as a VPN server. We use the VPN Client to connect to our corporate network (pls don't laugh, I know that it is very obsolete but I haven't had the time lately to switch to SSL VPN).
    The router has two WAN connections. One is the primary wan ("slow wan" link with slower upload 10D/1U mbps) and it is used for the corporate workstations used by the emploees. The other is our backup link. It has higher upload speed - 11D/11U mbps, (fast wan), and thus we also use the high upload link for our webserver (I have done this using PBR just for the http traffic from the webserver). For numerous other reasions we can not use the `fast wan` connection as our primary connection and it is used anly as a failover in case the primary link fails.
    The `fast wan` also has a static IP address and we use this static IP for the VPN Client configuration.
    Now the thing is that because of the failover, when we connect from the outside using the VPN Client, the traffic comes from the`fast wan` interface, but exits from the `slow wan` interface. And because the `slow wan` has only 1mbps upload the vpn connection is slow.
    Is there any way for us to redirect the vpn traffic to always use the `fast wan` interface and to take advantage of the 11mbps upload speed of that connection?
    This is our sanitized config
    crypto isakmp policy 1
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp client configuration group dc
    key ***
    dns 192.168.5.7
    domain corp.local
    pool SDM_POOL_1
    acl 101
    max-users 3
    netmask 255.255.255.0
    crypto isakmp profile sdm-ike-profile-1
       match identity group dc
       isakmp authorization list sdm_vpn_group_ml_1
       client configuration address respond
       virtual-template 1
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec profile SDM_Profile1
    set security-association idle-time 3600
    set transform-set ESP-3DES-SHA
    set isakmp-profile sdm-ike-profile-1
    interface Loopback0
    ip address 10.10.10.1 255.255.255.0
    interface FastEthernet0/0
    description *WAN*
    no ip address
    ip mtu 1396
    duplex auto
    speed auto
    interface FastEthernet0/0.3
    description FAST-WAN-11D-11U
    encapsulation dot1Q 3
    ip address 88.XX.XX.75 255.255.255.248
    ip load-sharing per-packet
    ip nat outside
    ip virtual-reassembly
    interface FastEthernet0/0.4
    description SLOW-WAN-10D-1U
    encapsulation dot1Q 4
    ip address dhcp
    ip nat outside
    ip virtual-reassembly
    no cdp enable
    interface FastEthernet0/1
    description *LOCAL*
    no ip address
    ip virtual-reassembly
    duplex auto
    speed auto
    interface FastEthernet0/1.10
    description VLAN 10 192-168-5-0
    encapsulation dot1Q 10
    ip address 192.168.5.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly max-reassemblies 32
    no cdp enable
    interface FastEthernet0/1.20
    description VLAN 20 10-10-0-0
    encapsulation dot1Q 20
    ip address 10.10.0.254 255.255.255.0
    ip access-group PERMIT-MNG out
    ip nat inside
    ip virtual-reassembly
    !!! NOTE: This route map is used to PBR the http traffic for our server
    ip policy route-map REDIRECT-VIA-FAST-WAN
    no cdp enable
    interface Virtual-Template1 type tunnel
    ip unnumbered Loopback0
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile SDM_Profile1
    interface Virtual-Template3
    no ip address
    interface Virtual-Template4
    no ip address
    ip local pool SDM_POOL_1 192.168.5.150 192.168.5.152
    ip forward-protocol nd
    !!! SLOW-WAN NEXT HOP DEFAULT ADDRESS
    ip route 0.0.0.0 0.0.0.0 89.XX.XX.1 5
    !!! FAST-WAN NEXT HOP DEFAULT ADDRESS
    ip route 0.0.0.0 0.0.0.0 88.XX.XX.73 10
    ip nat inside source route-map FAST-WAN-NAT-RMAP interface FastEthernet0/0.3 overload
    ip nat inside source route-map SLOW-WAN-NAT-RMAP interface FastEthernet0/0.4 overload
    access-list 101 remark SDM_ACL Category=4
    access-list 101 permit ip 192.168.5.0 0.0.0.255 any
    access-list 101 permit ip 10.10.0.0 0.0.0.255 any
    ip access-list extended FAST-WAN-NAT
    permit tcp 192.168.5.0 0.0.0.255 range 1025 65535 any
    permit udp 192.168.5.0 0.0.0.255 range 1025 65535 any
    permit icmp 192.168.5.0 0.0.0.255 any
    permit tcp 10.10.0.0 0.0.0.255 range 1025 65535 any
    permit udp 10.10.0.0 0.0.0.255 range 1025 65535 any
    permit icmp 10.10.0.0 0.0.0.255 any
    ip access-list extended REDIRECT-VIA-FAST-WAN
    deny   tcp host 10.10.0.43 eq 443 9675 192.168.5.0 0.0.0.255
    permit tcp host 10.10.0.43 eq 443 9675 any
    ip access-list extended SLOW-WAN-NAT
    permit ip 192.168.5.0 0.0.0.255 any
    permit ip 10.10.0.0 0.0.0.255 any
    route-map FAST-WAN-NAT-RMAP permit 10
    match ip address FAST-WAN-NAT
    match interface FastEthernet0/0.3
    route-map REDIRECT-VIA-FAST-WAN permit 10
    match ip address REDIRECT-VIA-FAST-WAN
    set ip next-hop 88.XX.XX.73
    route-map SLOW-WAN-NAT-RMAP permit 10
    match ip address SLOW-WAN-NAT
    match interface FastEthernet0/0.4

    Can you try to use PBR Match track object,
    Device(config)# route-map abc
    Device(config-route-map)# match track 2
    Device(config-route-map)# end
    Device# show route-map abc
    route-map abc, permit, sequence 10
      Match clauses:
        track-object 2
      Set clauses:
      Policy routing matches: 0 packets, 0 bytes
    Additional References for PBR Match Track Object
    This feature is a part of IOS-XE release 3.13 and later.
    PBR Match Track Object
    Cisco IOS XE Release 3.13S
    The PBR Match Track Object feature enables a device to track the stub object during Policy Based Routing.
    The following commands were introduced or modified: match track tracked-obj-number
    Cheers,
    Sumit

  • OSX: multi client server app with NSNetService

    hello
    i have a small osx server app
    that uses NSNetService to manage connection and set up streams
    but it seems to stop advertising as soon as a clients connects
    how can i make it multiclient so it keeps advertising and when a new client connects uses the same streams ?
    thanks in advance
    nonnus

    superdeportivo wrote:
    Hello fellahs, as the title of this post says I'm making a client and server application. The server are supposed to handel several clients, and the communication is done true UDP. Out of interest why have you chosen UDP rather than TCP?
    I have got two questions concerning this. The first one is if a exception is throws in the server should I then send the exception back to the client in serialized form. If I choose to do this then I also would need to handel the exception classen to the client. Or should I send back a regular IOException and use it's init cause to define the exception which occured in the server. That is up to you, you can do either. I would do the first option.
    The second question is concerning the multi client support. If this is going to work then I would need to time-out the connection i the server environment, and I have not a clue about how long it should be?It should be long enough that you don't timeout a valid connection. There is no simple answer to this.

  • T430s - cannot get supported multi-monitor configuration to work

    Hi all,
    I just purchased a new T430s and, overall, I've been very happy with it.  However, I'm having trouble getting a particular multi-monitor configuration to work.  Very simply, I am trying to get the very first configuration as is described on this page...
    http://lnv.gy/15YWJnf
    It is simply a 3-monitor setup where one monitor is external and hooked up via VGA, another monitor is external and hooked up via DisplayPort, and the third monitor is the actual laptop monitor.  I simply cannot get this to work!  I can plug in a single external monitor, but when I try and plug in a second, it always disables my laptop monitor, so I end up with only a 2-monitor setup.  Can anyone please help?
    *Also, I should note, I've called Lenovo Support 3 times after encountering this problem, and, suffice it to say, it was an EXTREMELY frustrating and discouraiging experience.  All in all, I spent over 2 hours on the phone and each time, they essentially REFUSED to help me!  They kept citing that it was a "configuration" issue and that it's not their problem, and then they'd forward me to another department which would then forward me right back to them.  At one point, one rep said that I was essentially "**bleep** out of luck".  Furthermore, when I was getting frustrated with the lack of help, I asked a rep to escalate the issue and allow me to talk to a manager.  He said that he COULDN'T DO IT because the system wouldn't allow it, again, citing that it's a configuration issue and not their responsibility!  Does anyone from Lenovo ever read these forums?  Will someone PLEASE take ownership of this issue and help me out?  I'm not asking for much!  I just want to get a setup that you guys say is supported!
    Sorry for the rant, but my interactions with Lenovo support have really been frustrating.  Anyways, any help would be much appreciated.  Thanks in advance!
    Charles
    Solved!
    Go to Solution.

    whoischarles,
    Welcome to the forum!  Thanks for the question and  tweet about this thread.  Thanks Lead_Org for getting us started... I know you have tried out a number of multiple display configs, so you may have some follow up suggestions....
    As far as I know...
    The T430s supports external displays a little differently than the T420s did, and differently than the T430 and T530 do.  There are a number of different discussions on T430s multiple display configs in the forum - you might search a few and just browse them to see the combinations others have tried and their experiences.  Here is one example.  Here is another more recent.
    Here is another more recent.
    Here is an official tip with specific configs that Lenovo supports for the T430s.
    From our official tip, it appears that you cannot have both the LCD and external VGA and displayport.  I think you can have 2 external displayport displays and either a 3rd external via VGA port, or the built in LCD.   I remember trying out some of these a year or so ago, and I seem to recall that you needed a dock to get 3 external, or 2 external and the internal LCD to work on the T430s. 
    Best regards,
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Using Basic or Multi-tier configuration for WLS Clusters...

    Ok,
              The scenario is: I'm using WLS6.1 (hopefully, version doesn't matter here)
              with three instances clustered. Each instance provides all Services:
              Servlets / JSPs/ EJBs / Database communication... I'm using the Basic
              configuration described on the BEA documentation....
              Now, I want to move forward to a Multi-tier configuration, where the first
              layer will serve Servlets and JSPs and the second layer will serve EJBs.
              The problem: On the first scenario, I was looking EJBs with the Default
              InitialContext() constructor without the environment, since everybody was on
              the same JVM...
              What do I have to do, so my Servlets start looking for EJBs on the second
              cluster now? Do I have to re-write every single lookup? Can I use a
              jndi.properties file on the first layer - on the presentation tier?
              Thanks in Advance,
              Marcelo.
              

              Thanks Patrick!
              But my actual problem starts here. The Servlets aren't mine. We have to support
              applications which run atop our product(which is a bunch of beans+RMI Objects
              running on the top of WLS) in a backward compatible way with a standalone.
              Will try and make a post if I can find a 'configurable' way out.
              Harish
              Robert Patrick <[email protected]> wrote:
              >Put the other server's PROVIDER_URL in a system property, property file,
              >whatever and
              >have the servlets explicitly use it when creating the InitialContext
              >to talk with the
              >other server...
              >
              >Harish Vajha wrote:
              >
              >> Hi Cameron,
              >>
              >> A -Djava.naming.provider.url nor jndi.properties would work. The problem
              >is like
              >> this:
              >> Say I have two WL servers hosting just EJBs: E1, E2. And I have a single
              >WL Server
              >> hosting just servlets: S1. Now I give the -Djava.naming.provider.url=E1(using
              >> http or t3) (or I provide the same thing using my own jndi.properties).
              >>
              >> The problem with this setup is that while starting up, the Server will
              >try binding
              >> every object(including the System bindings like wl.transaction.TransactionManager,
              >> wl.common.T3Services) to the other NS (in this case E1's naming service)
              >which
              >> is bound to fail, as they're already bound in that Server.
              >>
              >> The solution has to be a way to specify the java.naming.provider.url
              >only for
              >> the servlets (or the web app).
              >>
              >> Any ideas on how to provide a Webapp specific lookup address?
              >>
              >> Marcelo, if you've found a way out to separate, pl. make a post.. Thanks!
              >>
              >> Harish
              >>
              >> "Cameron Purdy" <[email protected]> wrote:
              >> >Hi Marcelo,
              >> >
              >> >With Weblogic, your performance will typically decrease if you go
              >the
              >> >route
              >> >that you are describing.
              >> >
              >> >Yes, you can do jndi.properties, however I believe you will find it
              >inside
              >> >one of the WL jars.
              >> >
              >> >Note that you can use java -D instead to define some of the JNDI properties
              >> >to point to the other cluster, but I can't remember them off-hand.
              >> >
              >> >Peace,
              >> >
              >> >--
              >> >Cameron Purdy
              >> >Tangosol Inc.
              >> ><< Tangosol Server: How Weblogic applications are customized >>
              >> ><< Download now from http://www.tangosol.com/download.jsp >>
              >> >
              >> >
              >> >"Marcelo Caldas" <[email protected]> wrote in message
              >> >news:[email protected]...
              >> >> Ok,
              >> >> The scenario is: I'm using WLS6.1 (hopefully, version doesn't matter
              >> >here)
              >> >> with three instances clustered. Each instance provides all Services:
              >> >> Servlets / JSPs/ EJBs / Database communication... I'm using the
              >Basic
              >> >> configuration described on the BEA documentation....
              >> >>
              >> >> Now, I want to move forward to a Multi-tier configuration, where
              >the
              >> >first
              >> >> layer will serve Servlets and JSPs and the second layer will serve
              >> >EJBs.
              >> >>
              >> >> The problem: On the first scenario, I was looking EJBs with the
              >Default
              >> >> InitialContext() constructor without the environment, since everybody
              >> >was
              >> >on
              >> >> the same JVM...
              >> >> What do I have to do, so my Servlets start looking for EJBs on the
              >> >second
              >> >> cluster now? Do I have to re-write every single lookup? Can I use
              >a
              >> >> jndi.properties file on the first layer - on the presentation tier?
              >> >>
              >> >> Thanks in Advance,
              >> >> Marcelo.
              >> >>
              >> >>
              >> >
              >> >
              >
              

Maybe you are looking for