Multi mapping & seeburger Message Tracking (Filestore module)

Hello,
For the people who knows seeburger archiving...
Anybody make the scenario using multi mapping (split in the receiver) with message Tracking seeburger (File Store module in the Receiver Channel)?

Hi,
before these steps you need to have MT installer file based on your database and some settings needs to be done at database level.
if you have seeburger manuals there is one pdf 'SAPXI_Archiving_en.pdf' which talks about MT.
Suresh

Similar Messages

Seeburger Message Tracking

Hi,
Can anyone please tell us how to use seeburger message tracking.
I understand that there are 3 steps to be done.
1. Mapping in IR should have a UDF which referrers to the standard Seeburger function jar files.
2. Module configuration in the channel with FileStore module.
3. Configuration in Message Tracking.
But need some details about each step.
Could anyone please provide a document which explains this configuration.
Thanks in advance
Jagruthi

Hi,
before these steps you need to have MT installer file based on your database and some settings needs to be done at database level.
if you have seeburger manuals there is one pdf 'SAPXI_Archiving_en.pdf' which talks about MT.
Suresh

How to populate the Sender and Receiver GLN/ID in the Seeburger Message Tracking

HI Team,
Scenario :
ECC--> PI--> Party
Sending GS1 XML Message to party (Not EDI). Sender Party and Receiver Party appearing as expected.
BUT User expecting to see the Sender GLN and Receiver GLN in Seeburger Message Tracking.
It should be dynamically picked form GS1 Message. Should Appear in RED BOXES Shown below.What Module Parameters Should be used for this.
I have Tried destTargetMsg and destSourceMsg. But did'nt work.
can anyone please Help

Hi Veman
You are correct. For XML to XML, you do not need BIC module.
However, since you are not using BIC module, you will not be able to enrich the metadata using the archiveXI parameter during processing at the adapter framework.
Another place to enrich the metadata would be during message mapping. You can call a custom UDF to populate the metadata and create an entry in Seeburger Message Tracking.
Please refer to the Seeburger manual for Message Tracking Function for more details on how to create the UDF.
Rgds
Eng Swee

Multi-Mapping and Message Split using BPM

Hi All,
Could anyone pls let me know clearly how message mapping can be done for this weblog
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanks,
Ram

Hi,
When you are doing Message mapping after adding the Messaget types for source and target messages. You can click on the "" button in the target message and add one more tab. You can go to Message tab as shown in the 5th image and click "" button to add one more message type. Then do the mapping as usual.
Based on the value of the element(name), the node of input(details)should be directed to one of the two message types
Here in this blog it is done based on the Name.
You need to use IFTHENELSE boolean function and do the mapping.
Thanks,
Prakash

Multi mapping and message splitting in BPM

Hi ,
I am working with this scenario ...
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
how many message interfaces i have to create .
one outbound , one abstract and two inbound .. is it correct.

Hi
Minimum you need to create three message interfaces i.e. Bpm_In_MI_Abstract, aBpm_Out_MI_Abstract Bpm_Out1_MI_Abstract, because abstract interfaces can be use inbound and outbound as well.
You can also use create implement it by using inbound and outbound message interfaces. In that case you have to use three additional interfaces(1 outbound and 2 inbound).
Regards
Sami
Reward points if helpful.

Multi-Mapping and Message Split using BPM UDFs Error

hi
As per the below blog
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
I have just modified the UDFs(1.selectnodeifA 2.selectNodeifB)
1.selectnodeifA
for(int i=0;i<=n;i++)
if(Name.equals("A"))
result.addValue(Node);
2.selectNodeifB
for(int i=0;i<=n;i++)
if(Name.equals("B"))
result.addValue(Node);
while checking I am getting the following errors
Source code has syntax error:
D:/usr/sap/D10/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapdc8fa4d0896011dd907d001cc01cef0d/source/com/sap/xi/tf/_bpm_mm_.java:132: cannot resolve symbol
symbol : variable n
location: class com.sap.xi.tf._bpm_mm_
for(int i=0;i<=n;i++)
^
D:/usr/sap/D10/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapdc8fa4d0896011dd907d001cc01cef0d/source/com/sap/xi/tf/_bpm_mm_.java:140: cannot resolve symbol symbol : variable n
location: class com.sap.xi.tf._bpm_mm_
for(int i=0;i<=n;i++)
^
2 errors
The source code given in the blog is correct ? I thought for loop has not completed
pls help
manian

Hi manian,
I was having a look to Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure blog.
The functions are not the same. I mean, yours and blogs functions.
Each function has two parameters, Name and node. Furtheremore, in the blogs' functions is using arrays and you don't.
So, the right code will be
1.selectnodeifA
for(int i=0;i<=node.length();i++)
if(Name.equals("A"))
result.addValue(Node);
However, if you don't need an advance user defined function as you want to process just one element of the node's queue, you will not need to use for sentence.
Something like:
1.selectnodeifA
// for(int i=0;i<=n;i++)
if(Name.equals("A"))
result.addValue(Node);
Hope it is usefull for you.
Carlos

Seeburger message tracking archiving / deleting question

Hello,
We are using Seeburger 1.7 with XI 7.0 for our EDI translations..We store information in Seeburger Message Tracking for our business requirements.I would like to know how these entries could be archived(Compressed) and stored or deleted after certain days so that we wont max up our storage..?
Any suggestions are appreciated.
Thanks in advance!
Larry

Prateek,
Thanks for your response.Yes,I could find the "Archive Configuration" option..when I click that it shows me a screen saying show master data with two items with check boxes (Document Types & Archiving Systems)..On clicking the details of them I see set of parameters which shows the profile and the document type..not sure how to proceed from here to set up any archiving / deletion..any help is appreciated..
Regards,
Larry.

Seeburger Message Tracking Update

Hi All,
I m working on one IDOC to Bank (820 document ) scenario. I am using the File adapter at receiver side and dumping a XML file.
I am trying to Update the message tracking in the seeburger using a function in message mapping which basically uses a UDF which includes use of MTMasterXI.
Any pointers on how to update the message trace in Seeburger Workbench will be appreciated.
Regards..
Sachin Dhingra

What do you mean by "update the message trace"?
You can see the message in Message Tracking tab of Workbench. But before that a bit more settings are required.
- Mapping in IR like you did it by creating UDF. It should refer to the standard Seeburger function jar files.
- Module configuration in the channel with FileStore module.
- Configuration in Message Tracking.
I hope the Message Tracking is already working for you when you click on Message Tracking tab.
Regards,
Prateek

Seeburger Message Tracking - File Store Dinamic variables

Hello,
I dont have to much information about FileStore Module. I will appreciate if someone have information of this
or
If someone knows how to use dinamic variables with File Store....
Thanks & Regards,
lpbuff

Hi Suresh,
My question goes because I want to store in MT database some information of my message, but it should be before the message mapping that i use an UDF. Because i have a condition in my Receiver Determination so some message are not going to pass however i want to store some values in the MT database...so i need to store variable in File Store...i dont have documentation of this module so i've just know the usual parameter....
Any idea?...
Thanks!
lpbuff

Multi-mapping with message bundling but without using BPM

Hi all,
I have a requirement to bunch specific no. of records (say 50) from source message and create separate target messages for those bunches. For example, if the source message has 120 records, then there should be three separate target messages created containing 50, 50 and 20 records each.
I am wondering whether this multi-mapping is possible without using BPM, as the typical no. of records in the source message are in the range of 600 to 800, and rarely (twice or thrice a month) they shoot up to 2000. So my concern is whether BPM would affect the performance. We are using PI at SP12.
Regards,
- Shankar.

Sorry for late reply.. Well the sender is a file system, which sends a single XML file containing multiple records. (I mean I have a sender file adapter that polls periodically from a specific path and picks up the file when it is available)
The no. of records in the source file may be different in each run. The requirement on the receiver system is that it can handle a file which has maximum of 'n' records only (say 50 in my example)
Now the sender file can contain any no. of records. It may contain 10 on some day, or 200 the next day, or 120 on the third day. But on the receiver side, I want the files to be created such that each will contain AT MAX 50 records.
So, if source file has <=50 records, then there will be only 1 target file having the same no. of records.
If source file has between 51 to 100 records, then there will be two target files. One will have 50 records, and the second will have remaining records.
And so on..
Regards,
- Shankar.

Multiple Partners for the same customer in Message tracking of SEEBURGER

Hi,
This is for third party customers which use EDI messages. We have for one customer multiple partner numbers configured in Partner profile. I would like to know while configuring the trading partners in SEEBURGER Message Tracking, can we have multiple keys for the same customer for multiple partners for an INVOIC02. Like the following keys:
12345_INVOIC02
34567_INVOIC02
45678_INVOIC02

Hi Satya,
you can define for a vendor/customer several partner functions with different
adresses. You can create certain partner roles several times.
If you create a purchase order, than you can choose the wanted
address and partnerrole on the header level. In the standard system you
can use the patner role 'OA' ordering address and for the finance
the 'IP' Invoice presented by.
I hope I was able to help you.
Kind regards,
Zsuzsanna

Split Message value in Multi-Mapping

Hello everybody,
I got the following problem with 1:n Mapping
My Source Structure is
<root>
.<element_list> // 1:1
..<element> // 1:unbounded
...<value>
...</value>
..</element>
.</element_list>
</root>
Sample for source structure:
<root>
.<element_list>
..<element>
...<value>WILLIAM
...</value>
..</element>
..<element>
...<value>RICHARD
...</value>
.</element_list>
</root>
I want to split by multi-mapping!
The target structure looks similar as source target structure (just <element_list> is missing)!
So my structure looks in target:
<Messages>
.<Messages1>
..<element>
...<value>
...</value>
..</element>
.<Messages2>
..<element>
...<value>
...</value>
..</element>
For splitting the <value> tag is responsible:
Every RICHARD should be mapped to <Messages1>
Every WILLIAM should be mapped to <Messages2>
--> so I use the if-function (I dont want to use the SORT function!)
But this seems not to work.
Any suggestions?
Regards Mario
null

Hi Vijaya
annotation:
I need different messages!
So in the tab >messages< of massage mapping
Target Message: The message type must occur in row 1 & 2
Like in thread: /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Here: First screen shot under >Message Mapping<
Did you do this?
Regards Mario
Message was edited by:
 Mario Müller

Multi-mapping not found at configuration time

Hi
I have defined an interface mapping that takes one msg interface as source and two msg interfaces as targets - the underlying message mapping is a multi-mapping.
However , when I go to configuration time - and create a enhanced interface determination - and drop down - to pick up multi-mapping - it says no objects found !!!
I double check the sender interface and its link with the SWCV , the interface mapping - everything is ok . Coud anybody help me - as to why my multi-mapping is not being picked up at configuration time ( I also check the runtime cache - everything is ok )
Please help !!!!

HI,
see the below links
multi mapping - /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
multi mapping without bpm -/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
Multiple mappings into one Im - Multiple message mappings in one integration scenario
Regards
Chilla

How to call xslt mapping in message transformbean

Hi Folks,
I have written a simple xslt mapping to convert 2 fields into different fields. That is working fine from me.
I want to use this xslt mapping in message transformbean adapter module. I dont want to use this in operation mapping. Can you please tell me how would I do this.
How would I configure this.
Thanks,
Rohini

Hi,
According to me, we cannot call the xslt program/map from adapter module.
Why we can't call is in adapter module we can use java EJBs, but what ever you suppose to call is not an EJB application.
FYI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
Regards,
Venkata Ramesh

Multi-Mapping with BPM?

Hi Experts,
Can anyone send me a scenario which contains multi-mapping using BPM (collect pattern)........I searched on SDN but cudn't find any scenario which contains Multi-Mapping BPM scenarios. All the scenarios which r available based on without BPM.............points will given to the approriate replies.
Thanks in Advance
Faisal

Hey
strange you didn't find it,it was the second link when i searched SDN with the string "multimapping BPM"
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanx
Aamir

Multi mapping & seeburger Message Tracking (Filestore module)

Similar Messages

Maybe you are looking for