Multi Org Access Problem in Oracle Alerts

Hi All,
I created one Alert for sending an email through Oracle Alert, after sending the mail I need to update one column in the table to indicate that alert has been sent for this particular row.
Alert is sending mail correctly but it goes to update statement it throws following error:
PL/SQL procedure successfully completed.
BEGIN MO_GLOBAL.SET_ORG_ACCESS(0, null,'M'); END;
ERROR at line 1:
ORA-20001: APP-FND-02901: You do not have access privilege to any operating
unit. Please check if your profile option MO: Security Profile includes any
operating unit or the profile option MO: Operating Unit is set.
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.MO_GLOBAL", line 638
ORA-06512: at line 1
APP-ALR-04020: Oracle Alert was unable to execute "&VALUE". Check that this file exists and that its read protection is set correctly.
both the profiles MO: Security Profile, MO: Operating Unit are alredy set but still I'm getting error.
My alert's update is simple update stement on custom table, Please guide.
Thanks in advance.
Regards,
Reetesh Sharma

Hi Reetesh ;
What is your OS and EBS level?
please check below Notes:
APP-FND-02901 error when trying to open OM Forms [ID 887512.1]
Convert to Multi-Org: Oracle error 20001:ORA-20001:Error occured during product initialization for MO [ID 413031.1]
XLAACCPB - Create Accounting Program fails with Oracle error -20001: ORA-20001: APP-FND-02901: You do not have access privilege to any operating unit [ID 753824.1]
When Running Concurrent Programs Get Oracle error -20001: ORA-20001: APP-FND-02901, Why? [ID 1061434.1]
Accessing Responsibilities after Applying Patchset Gives Ora-20001 on MO:Security Profile [ID 199842.1]
Hope it helps
Regard
Helios

Similar Messages

ESYU: R12 - Order Management를 위한 Multi Org Access Control(MOAC) setup 방법

Purpose
Oracle Order Management - Version: 12.0 to 12.0
Information in this document applies to any platform.
R12의 Order Management에 대핸 Multi Org Access Control(MOAC) setup 방법에 대해 알아본다.
Solution
일반적인 MOAC Setup:
1. HRMS에서 Security Profile을 정의:
a. HRMS Management responsibility 선택
b. HRMS Manager> Security> Profile로 이동
c. Security Profile이 정의되어 있는지 확인 (OM responsibility 혹은 Site level로)
d. 만일 아직 setup 되어져 있지 않다면 Operating Units를 입력
e. 저장
Note: 만일 위 d step과 같이 새로운 security profile을 생성하였다면 concurrent program 'Security List Maintenance'를 꼭 실행해야 한다.
그렇지 않으면 multiple operating units가 OM forms의 LOV에 나타나지 않을 것이다.
이 program은 multi-org access를 validating 하기 위해 사용하는 table에 data를 생성한다.
Navigation: HRMS Management> HRMS Manager> Processes & Reports> Submit Process & Report> Security List Maintenance
2. MO Profile Options setup:
a. MO: Security Profile - 이 profile setting은 MOAC functionality를 활성화 한다.
b. MO: Default Operating Unit - 이 Operating Unit는 OM forms과 report에서 default가 될 것이며, 이를 clear 하거나 변경하기 위해 LOV를 사용할 수 있다.
Keep the MO profiles in sync:
MO: Security Profile은 site와 responsibility level로 setting 할 수 있다.
MO: Default Operating Unit은 site, responsibility, user level로 setting 할 수 있다.
Application이 원하는대로 동작되지 않는것을 발견하면 이 profile options의 setting 값을 확인한다.
3. OM setup:
R12 upgrade 시 OM Profile에서 migrate 된 새로운 OM System Parameters를 확인:
Order Management Super User> Setup> System Parameters> Values
(See <<NOTE 393646.1>>-R12 Readiness Cheat Sheet: Migrated OM Profile Options)
4. Form에서 hidden field 'Operatin Unit'를 활성화시키고 default folder로 저장:
Sales Order and Order Organizer forms
Quick Sales order and Organizer forms
Sales Agreement forms
Pricing and Availability form
Other forms
Note: Sales Order form에서 hidden field 'Operating Unit'를 'Show' 하기 전에 fotm안에 이 field를 위한 공간을 만들어 놓아야 한다.
예를 들면 Customer Number field를 짧게 하거나 Operating Unit field로 이 field를 덮어씌울수 있다.
Reference
Note 393634.1

Hi Larry,
Have you considered adding the exec apps.mo_global.set_policy_context call to your connection's start-up script?
Tools -> Preferences -> Database -> Filename for connection startup scriptNot the most flexible approach, so I'm not sure if it is appropriate for your application, but just a thought. You might create distinct connection names with different start-up scripts for each org_id.
Regards,
Gary
SQL Developer Team

About Multi-ORG for EBS R12.1.1 .. Oracle error -20001 ORA-20001 APP-FND-02

I have two questions:
1. If I have only single organization, Do I need to set up multi-org? We will be using AR, AP, and GL modules only.
2. Is there any step-by-step process to set up multi-org?
I am getting error: "Oracle error -20001 ORA-20001 APP-FND-02901. You do not have access to any operating unit. Please check if your profile option MO:Security Profile includes any operating unit or the profile option MO: operating unit is set has been detected in MO_GLOBAL_INIT" when I access any form for Entry.
Thanks

1. If I have only single organization, Do I need to set up multi-org? We will be using AR, AP, and GL modules only.Yes.
2. Is there any step-by-step process to set up multi-org?https://forums.oracle.com/forums/search.jspa?threadID=&q=MultiOrg&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
I am getting error: "Oracle error -20001 ORA-20001 APP-FND-02901. You do not have access to any operating unit. Please check if your profile option MO:Security Profile includes any operating unit or the profile option MO: operating unit is set has been detected in MO_GLOBAL_INIT" when I access any form for Entry.Does this happen to all responsibilities?
Please see the steps in (ORA-20001: APP-FND-02901 Errors Encountered When "Requests" Tab is Selected from PFT or EPF [ID 859072.1]) to set the profile option at the responsibility level for the responsibility you are trying to access.
Thanks,
Hussein

MO: Operating Unit Non Usable Operating Unit for Multi-Org Conversion

Hello Hussein
I enabled multi org in 11i and mo Operating unit values set as Non Usable Operating Unit for Multi-Org Conversion, is ok to set is value or will that cause any responsibility.
In R12.1.3 I am getting an error like this
APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option.
Please advice
Thanks
Prince

user12094010 wrote:
Hello Hussein
I enabled multi org in 11i and mo Operating unit values set as Non Usable Operating Unit for Multi-Org Conversion, is ok to set is value or will that cause any responsibility.This might cause issues.
ORA-20001: APP-FND-2902: Multi-Org Profile Option is Required [ID 399910.1]
How To Prevent the Profile Option MO: Operating Unit being set to NULL at Site Level? [ID 393560.1]
In R12.1.3 I am getting an error like this
APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option.
Please adviceR12 - Error ORA-20001, APP-FND-02902 Accessing Profile Classes Form With Multi-Org Access Control (MOAC) Enabled [ID 602141.1]
Unable To Open Customer Account Details, Error :ORA-20001: APP-FND-02902: Multi-Org profile option is required [ID 987165.1]
Entering to Profile Classes Gets Ora-20001, App-Fnd-02902. Multi Org Profile Option Is Required [ID 465132.1]
Error 'ORA-20001: APP-FND-02902: Multi-Org Profile Option Is Required' When Open Account Details [ID 1406860.1]
Some Web Pages Fail To Load After Patch Application [ID 1281328.1]
You may also search MOS website for APP-FND-02902 and go through the docs.
Thanks,
Hussein

Multi-Org in Oracle Sales

Hi All,
I have a two part question for you:
A) Are multiple organizations supported for salesreps and managers in 11i.5?
B) Could any one point me to the documentation for implementing multi-org in Oracle Sales?

You can get all the Oracle app documentation from http://download-west.oracle.com/docs/cd/B25516_05/current/html/docset.html. The guide name is "Multiple Organizations in Oracle Applications".
The direct link to this guide is http://download-west.oracle.com/docs/cd/B25516_05/current/acrobat/115multorg.pdf.
Please note that you need a OTN login to access this, which you can get for free at otn.oracle.com. If you have metalink login, it may also work in otn.
Gaurav.

Multi-Org impact on Oracle CRM modules especially on Oracle Service

Multi-Org impact on Oracle CRM modules especially on Oracle Service
====================================================
I have been searching for any information (notes,whitepapers/ presentation) on the impact of multi org implementation on Oracle Service module and so far not been able to find any either on metalink or on internet.
Any of you have any inputs on this ? Please provide the same if any.
basically,
Looking for the kind of security applied on SR creation form,Debrief form and charges form when a multi org is enabled.
I also tried to test this out in our instance and found that it seems to have no impact.
Gana

HI,
Yes indeed there is a impact of MULTI-ORG on the Service Module in 11i.
All the things are integrated now.
Everything is dependent on the MO:Operating Unit Profile Option and the setup which you had done.
1)
Security on SR creation Form:-
See you can implement the security, but for that you have to setup accordinglly and also to follow the process.
If you create 2 responsibilities with MO profile option different, then none of them will able to see the others data.
Note:-
But if you are using the instance to generate the SR, then you had to make it sure that the ITEM which you are using should be assigned to the Operating unit which is set in the MO profile Options of that responsibility.
2)
Debrief Form:-
As you must know that for debrief to work, you had to setup the Service Activities.
This is where you can define the security.
1) Create a Service activity,
2) Map it with BILLING TYPES
3) Map the Billing Types with Order Management Header and the Line Type
This the place where you can specify the Operating Unit.
When a user will log in and open a debrief form, then he will be able to see only those service activities which are mapped with the operating unit as that of set in MO Profile Option to the user.
3)
Charges:-
The same as the debrief is applied on the charges TAB.
Here you will only able to see the Service activites which are mapped with the operating unit as that of set in MO operating unit.
If you want ITEM level security, then you will be only able to see the items which are assigned to the Operating unit as that of set in the MO profile option.
Hope this will clear your doubt.
If want more clarification, you can ask me.
Regds,
Vikram

Oracle Alert: Access before and after update values of a table column

We have a requirement where a notification needs to be sent when 'END_DATE' attribute (column in a table X) is set, in an Oracle Applications form.
I have defined an Event based Oracle Alert which fires 'On Update' of the table X.
Could anyone please let me know as how to access the value of 'END_DATE' before and after update (i.e :new.END_DATE and :old.END_DATE) in the sql query of the alert.
The need to use the before update and after update values of the attribute 'END_DATE' is that if we add the condition END_DATE is not null, the alert is sent even if any other attrbutes are updated in the Oracle form which is not the intended behavior.
Appreciate any help.
Thanks

Hi
use selectionlistener for your first table then add clientlistener and serverlistener so that you will get the rows on click in back bean.
then get second table vo and and create and add row for that view object. add partial target to refresh your second table from back bean.
on click of save call commit operation.

Problem Printing Report From Oracle Alert

I cannot get it to print. I have an Oracle Alert which spawns a concurrent program which runs an Oracle Report. The report runs but does not print since there seems to be no way in which to pass the number of copies to Oracle Reports.
This is probably not a supported feature but does anyone know of a solution to this problem?
The environment is Oracle Applications 10.7SC.
Thanks, Larry

What forms-version do you use?

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

PreparedStatement problem in Oracle OTD(JCAPS 5.1.3)

Hi,
I encountered a problem with Oracle-eway-generated PreparedStatements when trying to build a project in enterprise designer . I know that without using any prepraredstatement, my project builds fine. Below is the text on the error pop-up window:
java.lang.NullPointerException
at com.stc.codegen.OTDImpl.model.OTDCodeletFactory$ArtifactKey.hashCode(OTDCodeletFactory.java:136)
at java.util.HashMap.hash(HashMap.java:261)
at java.util.HashMap.containsKey(HashMap.java:339)
at com.stc.codegen.OTDImpl.model.OTDCodeletFactory.getOtdFromBuisnessProcess(OTDCodeletFactory.java:207)
at com.stc.codegen.OTDImpl.model.OTDCodeletFactory.createCodelets(OTDCodeletFactory.java:285)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:382)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
at org.openide.util.Task.run(Task.java:136)
[catch] at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)In order to isolate the problem, I have created a simplified project which just reads a text message and writes the message into the Oracle database with the help of a PreparedStatement. I had an error as well;
"Oracle eway code generation error(ERROR_CODEGEN_BPEL_CODELET_GENERAL)"
Caused by: com.stc.codegen.framwork.model.CodeGenException: Error when generating OTD code ...Exception: Invalid parameter type: Class: [TEST] Object: [Param1] Param Type: [VARCHAR].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)I think that there is a conflict between the parameters in Oracle and the parameters in the code. Somehow, Oracle eway cannot get the parameter type from database correctly.
Is there a solution for this? I couldn't find any patches/updates for Enterprise designer or eway. Can you point me to right direction if there is any.
Thanks in advance,
Mete

Hi there,
(I think) I have found the solution. When designing OTD, I have mapped VARCHAR2 column as CHAR. Somehow, JCAPS throws a code generation exception if the field is not mapped as a CHAR for a VARCHAR2 database column.

List partitioning multi-org tables

Hi
I am doing list partitioning on receivables multi-org tables on org_id column. Running into a performance problem with multi org views. The multi-org views for receivables tables are defined like below with a nvl condition on org_id (partitioned column) in their where clause
create or replace ra_customer_trx
select select * from ra_customer_trx_all
WHERE NVL(ORG_ID,NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV ('CLIENT_INFO'),1,1), ' ', NULL, SUBSTRB(USERENV ('CLIENT_INFO'),1,10))),-99)) = NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV ('CLIENT_INFO'),1,1), ' ', NULL, SUBSTRB(USERENV ('CLIENT_INFO'),1,10))),-99)
Queries against the view are doing all partition scan when I exptected partition pruning to kick in and the query goes only against the spefific partition.
select count(1) from ra_customer_trx ---- does all partition scan
select count(1) from ra_customer_trx_all where org_id = <> ---- does single partition scan, works well.
When I recreate the view with out any function calls on the org_id column partition pruning happens.
In a non partitioned environment which has an index on org_id column, both the above sqls use the index and yield same result.
So my questions are -
1. Is there a way to get around this problem without having to modify the oracle supplied multi-org views? Any options I can supply in the partition script?
2. In a non-partitioned env, with an index on org_id how is the optmizer able to go against the index and where as it is not able to in partitioned environment..? Both these envs has the same view definition with NVL(org.......) consition.
Does anyone have any suggestions?
Thank you.

user2317378 wrote:
1. Is there a way to get around this problem without having to modify the oracle supplied multi-org views? Any options I can supply in the partition script?You mean to say that the expression used in the view belongs to some Oracle supplied schema, like APPS? Or is this a view you've created yourself?
Can you show us the output of EXPLAIN PLAN using DBMS_XPLAN.DISPLAY when querying the view? Use the \ tag before and after to use proper formatting in fixed font.
Please make sure that the "Predicate Information" section below the plan is also included in your post. If it is missing your plan table is old and needs to be upgraded using $ORACLE_HOME/rdbms/admin/utlxplan.sql or dropped if you're in 10g which provides a system wide PLAN_TABLE.
2. In a non-partitioned env, with an index on org_id how is the optmizer able to go against the index and where as it is not able to in partitioned environment..? Both these envs has the same view definition with NVL(org.......) consition.
These are two different questions. One is about partition pruning not taking place, the other one about an index not being used.
Can you show us the output of EXPLAIN PLAN using DBMS_XPLAN.DISPLAY when querying the unpartitioned example? Use the \ tag before and after to use proper formatting in fixed font.
Please make sure that the "Predicate Information" section below the plan is also included in your post. If it is missing your plan table is old and needs to be upgraded using $ORACLE_HOME/rdbms/admin/utlxplan.sql or dropped if you're in 10g which provides a system wide PLAN_TABLE.
It would be interesting to know how Oracle can use the index given the complex expression in the WHERE clause.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Apps 11i SET_CLIENT_INFO in Multi-Org environment

How do you set the client info (dbms_application_info.set_client_info) in a portal session so reports have access to correct Operations ORG data in a multi-org environment

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Multi Org in Release 12

As like in 11i, do we need to run multi org in Release 12.
If no needed, if it comes with default in release 12, what MO:operating unit will it take.

Multi-org conversion is not needed in R12.
Default operating unit defined by
MO:Default Operating unit is used to define operating unit at responsibility/user level.
For complete details on R12 Multi org ,refer to metalink id: 420787.1 --Oracle Applications Multiple Organizations Access Control for Custom Code
Regards,
alit
www.alsuminfotech.com

How to run OBIEE Reports in Multi-Org Environment?

How to run OBIEE Reports in Multi-Org Environment of EBS.

hi Rainer,
My Forms and Reports Server is in Same System only. Actually i am giving this path
http://vagee.ail/reports/rwservlet?
server=rep_vagee_oracle10g_apps_server&report=D:\FP2
\dealer_reports\oc_dealer.rep&userid=fp2/fp2erp@info
&destype=cache&desformat=pdf&ODSNO=OC0809/00110&branch=DLR002
In My AS System Running Successfully. But Client systems Page cannot be display message is displaying.
but generally i m able to access the reports server using this path
http://vagee.ail/reports/rwservlet?
then Reports server page is displaying but
when i specify that report server name
http://vagee.ail/reports/rwservlet?server=rep_vagee_oracle10g_apps_server
page cannot be displayed.
what will be the problem. please help me. thank you.
Regards,
Kalyan.

Impact of multi orgs

Hi
We are currently checking the impact of multi org on the existing processes and reports. Could any one suggest me what are the things that should be taken care of for our reports and processes to be multi -org complaint?
Thanks,
Sharath

Pl see if ML Doc 420787.1 (Oracle Applications Multiple Organizations Access Control for Custom Code) can help guide you
HTH
Srini

Multi Org Access Problem in Oracle Alerts

Similar Messages

Maybe you are looking for