Multicamera can't activate cam 4

Hey guys,
I've a problem with the multicamera mode in Premiere CS4. My aim is to use all four cameras. So each cam has its one sequence. All cam sequences were insert and synchronised in a new sequence. At next I have activated the multicam function on each track and assigned cam 1 to track 1, cam 2 to track 2 and so on. There the problem is: I can only select cam 1 up to cam 3. It's not possible to select cam 4 at any track.
Has someone an idea? This problem appears in others Premiere projects...
Thanks a lot,
Malte.

So each cam has its one sequence
That is not the correct way to do multicamera editing.
All cameras go into the same sequence, and get synced up there. You then nest that one original sequence into a new sequence, and enable multicamera on that one nested sequence clip.

Similar Messages

Can not activate camera on this pc

can not use camera on this pc please help activate

Chuchiis,
Find, Open, and read the file named: Webcam Reset and Check
Jump to the section titled: The "All things Webcam" help docs
Kind Regards,
Dragon-Fur

Can't Activate Recorder. Try Resetting Camera.

This is usually a easy fix based on what I know on Premiere and in comparison to other peoples threads I've seen with the same problem. However, my problem doesn't seem to have the same symptoms from what i've seen.
As the title indicates, when I go to the capture panel I get the "Can't Activate Recorder. Try Resetting Camera".
Both Windows and Adobe can detect when the device turns on and Off, but for some reason, both cs6 and cs5.5 cant access the device for playback. The device is a Sony HVR-M25U.
It works, because before I started using my new rig, which was only a couple of weeks ago.
My Previous Machine picked it up in cs5.5 with no problem, it's a pretty decent machine too. I'm pretty very certain that it still can detect the device with no problems. Only problem is I can't use it until I get a new video card. Or I can remove the vid card from my current machine and put it back into the old one and capture the tape that way, but that is far more tedious and doing that every time a tape comes along would become annoying.
In the Device Control Panel, DV/HDV is selected and in the options, the Check Status Box is Listed as Online.
The Rig I have didn't come with a firewire port, so I bought a PCI 2.0 Firewire Card and installed it. Device Manager has it listed as working correctly.
What do you guys think the fault could be? I'm starting to think it's the firewire card, unless there are other ways to trouble shoot that I am not aware of in Premiere in regards to device capture. I'm almost 100% sure it's not the device. The only other thing it could be is Adobe Pemiere Pro or the Firewire card I bought. Any suggestions?

Other software to try...
SD capture http://windv.mourek.cz/ or http://www.scenalyzer.com/main.html
Do note that the demo version of ScenalyzerLive puts a watermark in the files it creates
- I'm told that the OLD version is freeware... check the download page for details
HD capture http://strony.aster.pl/paviko/hdvsplit.htm
Also, be sure your firewire driver is the one with LEGACY in the title
>windows server 2008
OK... all bets are off... that is not a supported version of Windows
You may get program features to work... or you may not

Premiere won't recognize my camera (Can't activate recorder. Try resetting camera.)

Ok I have a very perplexing situation. I have been doing video editing for years but this is a new one for me. I just got a new Windows 7 PC (64 bit) I7-8GB RAM Lenovo system. I just installed Premiere CS5.5 on it and installed a new SIIG firewire card. I have a Sony Mini-DV camercorder that works great and have been exporting with firewire on my previous 3 systems with no problem (last system was Win 7 64bit as well). On this system I attach the camera via firewire cable and Windows instantly recognizes the camera and the general dialog box comes up asking me if I would like to capture video with Adobe Premiere, Cyberlink PowerDirector, or Windows Live Photo Gallery. Both PowerDirector and Windows Photo Gallery I can open and capture video with no problems. However if I open Premiere in anyway (in DV mode) and bring up the capture window while the camera is on I get the message: "Can't activate recorder. Try resetting camera." If I switch the camera off while the capture window is up it then switches to the message "Capture device offline".
So it seems the firewire card, camera are fine, but giving Premiere fits for some reason. Side notes, I also have a Sony FX-1 HD camera which I can connect with the same firewire cable and inside Premiere and it will capture video but will not display it while capturing (I read this is common with High Def video though). I also have disabled the Windows firewall as I read about in other threads. I have tried 2 other firewire cards with the same exact results. The mini-DV camera I'm trying to get Premiere to capture with is a Sony DCR-PC9 and I have used it in my last 3 systems all running Windows and Premiere. This is really frustating.
Any tips and or advice would be greatly appreciated!
Thank you, Kirk

Not Harm, but...
SD capture http://windv.mourek.cz/ or http://www.scenalyzer.com/main.html or http://www.exsate.com/products/dvcapture/
Do note that the demo version of ScenalyzerLive puts a watermark in the files it creates
- I'm told that the OLD version of Scenalyzer is freeware... check the download page for details
Try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

How can I activate the camera on my iPad?

How can I activate my camera on my iPad

Russ_02 wrote:
How can I activate my camera on my iPad
(1) Camera is already activated.
To use it, launch an app that operates the camera and tap the virtual shutter button.
(2) For more specific help, see the iPad User Guide for iOS 7.1 Software.
(If your internet connection is slow, it may take a minute for this link to open.)
Some apps that come with your iOS 7.1 and their User Guide references are:
Camera: Chapter 12, starting on page 68
Photo Booth: Chapter 19, starting on page 86
If you live in a country that does not block it, FaceTime: Chapter 9, starting on p. 58.
View photos you have already made in Camera Roll: Chapter 11, starting on page 63.
(3) If you want to explore other camera possibilities, you can search the iTunes Apps Store for other apps that can use your camera.
Message was edited by: EZ Jim
Mac OSX 10.9

I download app only available in Poland and change my IDi now I came back to original account but can not activate itune match anymore I have to wait 90 days any issue because I pay itune match with my original account thanks for support

I download app only available in Poland and change my IDi now I came back to original account but can not activate itune match anymore I have to wait 90 days any issue because I pay itune match with my original account thanks for support

thanks Meg
I understand you are not Apple but i was presuming that some logic or technical reason i miss was behind this.
I really do not see any logic business pratice. If i understand i can be agree or desagree but as minima i know the rules and why.
to sumarize...my story
my id was with XXX and i bought Itune match one year with this account and 4 device are conected with the same account.
on Ipad device i change my ID to YYY then .... because i need to update some apps and connect to itune match i came back to ID XXX then no problem to update apps but .... no way to come back to itune match.
.... no way to use itune match anyhow with Ipad and account XXX linked with account XXX. WHYYYY ??? no clue.

Macbook can't activate the camera after install the message beta.

Macbook can't activate the camera after install the message beta. I'd tried to uninstall the message beta, macbook still can't activate the rear camera in iChat. But the camera still can work in Skype or face time. Why?

Did you use the bad computer to post this message?
Where did you get the Flash program from?
Are all programs giving you problems, or only some? What ones?
'''[http://support.microsoft.com/fixit/ Microsoft Fix it Solution Center: troubleshooting software issues]'''
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Can't activate iPhone because Apple ID is locked 'for security reasons', can't reset Apple ID because need iPhone to receive two-step activate code!

So here's an interesting one...
I have just updated iOS on my iPhone and it came up with the activation prompt. I entered my iCloud email and password and it told me that my account was disabled for security purposes.
This happens quite regularly as my iCloud account and I constantly get the account locked out as other people mistake it for their account.
The procedure to unlock my account is to visit iforgot.apple.com and select the 'Reset your password' option, enter my iCloud email address, two-step recovery key and then nominate my iPhone to receive a two-step authentication code.
The problem is my phone won't receive the authentication code because it needs activation! My iPad is also listed but also won't receive the authentication code, I expect because my Apple ID is disabled!
Having read the support article regarding what to do when you can't receive the two-step authentication code it says login to your apple id account and manage the list of devices! You what!? I can't login because my account is disabled.
It seems there is a complete design flaw here in that I can't activate my phone without unlocking my Apple ID and I can't unlock my Apple ID without activating my iPhone first!
I've spoken to Apple in the past about this and their response was to login and manage my devices and I pointed out that I could not login in because my account is disabled. They then basically said there is nothing I can do! Really? They won't unlock my Apple ID because they don't have the ability to do so.
If I'm not mistaken my iPhone is no longer fit for propose and if I can't sort this I will be visiting the Apple store and asking for a replacement as basically my device is bricked. I guess I will have to create a new Apple ID and will no longer be able to get to my email on the old account!?
Any folks on here has similar issues or any suggestions?
<Email Edited by Host>

I have something similar going on, but not exact. I basically have a useless phone here because I restored the phone but supposedly when my son's father redid the phone years ago for our son he added the phone to HIS apple id (on find my phoen supposedly) which he no longer has nor uses. I need said apple id and pass to finish restoring the phone. Maybe we should all get together and pile all our bricks in front of apple headquarters so no one can get out of the building and they have to stay there until they fix this. :-P

I can't activate my iphone 5 after deleting its data on Find My Phone?

I lost my phone yesterday at the gym, someone found it but they didn't return it, so I came home and tracked my phone on the Find My Phone app, sent messages and I called the phone but the person did not reply, however, I deleted all its data clicking on the Erase Phone button and I sent a last message saying the Iphone was blocked and there was no way of them using it so they should return it.
This morning my gym called saying someone had returned it, the thing is, I can't activate seem to activate my iphone. The Message I sent from the app still shows on the screen and when I unlock it, it tells me to activate my iphone with itunes or wifi. When I try to activate it by wifi it says there's a technical problem and when I connect it to itunes it says the SIM card is locked and I have to unlock it, except that when I turn my iphone on it doesn't tell me to unlock my SIM card, it only tells me to activate my iphone so I don't know what to do really.
Thank you for your time and help.

Activating after a Find My iPhone lock bricks the device if you don't know the password used by Find My iPhone.
Read through this article to find if your device has an activation lock.
http://www.macworld.com/article/2048739/get-to-know-ios-7-activation-lock.html
If this is what you have - the news is bad:
http://www.cultofmac.com/246755/why-ios-7s-activation-lock-is-a-disaster-waiting -to-happen/

I can't activate my iTunes voucher

hi,can't activate my iTunes £50 voucher

Ask the people at the store the voucher came from or the iTunes Store staff for assistance.
(112731)

Help! Can't activate my iphone 4

Hello, i live in Russia, and iPhone 4 here costs about 1100 dollars (sim free), so i had no other choice but to go to Apple Store in Paris (i just happened to have a vaccation there) and buy two iPhones 4 there - one for my friend, one - for my stepfather. I bought two SIM FREE iPhones 4 - 629 euros per each. Now that i came back to Moscow i found out that one of them is sim LOCK, because they so happened to make a mistake and sell me the wrong one for the same price of sim free. I can't activate one of them because it requires French sim card, so i called iPhone Support online service - but they couldn't really help me.
Please, anyone, help me or advice smth to do, because i'm 17 and neither me nor my stepdad is good at that kind of stuff!!
Is there ANY possibility that i could unlock this iPhone??
Can i buy the french sim card to activate the iPhone and then change back to a russian one??
And how can i contact the Apple Support via e-mail??
Thanks in advance, smoochy

напишите, пожалуйста, удалось ли вам решить проблему? у меня даже не получается дозвониться до магазина ов франции, на общий телефон поддержки во франции тоже... звоню непосредственно в магазин прослушиваю информацию, нажимаю разные варианты меню либо слуша опять информацию, либо если выбираю техподдержку меня сбрасывает.. общий тел поддержки занят звоню с сотового говорят что телефон недоступен

How activate Camera Raw for Elements 11.Update button is not possible!!!

Hi @all,
i have Elements 11 and can not activate the update for Camara raw . At the moment is version 7.1 active.....but i need a higher version for my cameras. So what can i do now?

I downloaded DNGConverter_7_4.exe but i have the same problem ....Element can not open the raw files of my camere because Camera raw 7.1 is active....how can i change it? Sorry for my bad english ....anybody here for german?

Any http/telnet API to activate camera to start/stop recording?

Hi all,
The function is involved in a IoE(Internet of Everything) project for customer.
A. The action of 'start to record': will be triggered by event, such as when a sensor has detected some smoke in one room. The platform will activate camera by sending telnet/https command.
B. The action of 'Stop to record and Save': will be used based on duration: After recording for 5 mins, the camera will stop to record and save video into local disk automatically.
Of course, if VSOM is needed, that will be OK! The question will be: How to start/stop camera recording by VSOM API(http/telnet.)?
Thanks!
Ziwei

Hi! I've tried and I believe your Finesse Workflow is correct.
The trick is that on AQM you need to have your WFO Workflow Allowing to Record all calls.
Then to exclude all calls from being recorded, you can use the Inclusion List and make * for Exclude all Patterns for being recorded. Then your Finesse Workflow will work:
1) All calls are sent to AQM, but are not recorded because of the Excluded Pattern = *
2) Finesse Workflow only has the power to overwrite the Inclusion List configuration
3) Finesse Workflow cannot overwrite the AQM Workflow configuration.
Hope it helps,
Rui

I can't activate my phone 4s, it's factory unlocked

i can't activate my iphone anyway, it's 4s and factory unlocked, i don't know why but there was an at t sim card inside, it was sealed, can someone help me

If the iPhone came with a AT&T sim it is contract free NOT unlocked
Return it as it will only ever work with AT&T

CS3 Can't activate Recorder - additional solution

Hi all,
I was having the standard Windows 7 64bit firewire capture problem outlined here: http://forums.adobe.com/thread/869277. However, having followed those steps, I was still getting the "Can't Activate Recorder. Try Resetting Camera." error when trying to capture DV footage (DVCAM as it happens). I can capture HDV fine - and yes, I'm changing over the capture settings and the playback setting on the camera.
I had got to the point of being able to control the camera with the buttons at the bottom of the capture window, but had no display, and still had that error.
Happily, I have discovered an additional step which enables me to capture DV. You need to click the Edit button under Capture Settings (on the Settings tab), and in the window that pops up, click settings again. Then untick all the boxes (Preview Video on Desktop, Preview Audio on Desktop) for both During Preview and During Capture.
This should leave you with a black screen, but premiere will happily capture clips properly. You'll obviously need to log clips blind (without a display on the monitor), or capture whole tapes at a time, but it's still a valuable workaround.
So I just thought I'd post it up, seeing as I've seen some other poor souls on my forum travels who need this solution!
My specs: Premiere CS3 (3.2.0). Windows 7 64bit Home Premium. AMD Athlon II X2 245 2.9Ghz. 8GB RAM. NVidia GTS 450. Camera - Sony Z1E.

Judy,
When you are saying "HD" I think you mean "DV". The HVR-V1U, has 3 record formats. "DV" and "DVCAM" are 480i "Standard Definition" video and "HDV" is 1080i "High Definition" video. I had this same error when I switched over from editing in DV using CS4 to editing in HDV using CS5. In most Sony mini DV tape based HDV cameras you need to turn the "iLink conversion" off in the camera to keep the camera from converting the HDV video to DV while the camera exports footage, otherwise your High Defiition footage comes out as Standard Definition footage. I knew enough to do that. The part that does not make sense to me and where I got lost is every time I open a new HDV project file in Premiere Pro CS5, my default capture setting always reverts back to "DV" and I have to go in to my capture settings and manually switch it to "HDV" every time I create a new project which is annoying. It would seem to me that either there would be no option for "DV" capture in an HDV project file, or at least the default capture setting in an HDV project would be "HDV". If I am missing some reason why you would want to capture DV footage in an HDV project file, can someone please enlighten me???
Thanks. Gary

Multicamera can't activate cam 4

Similar Messages

Maybe you are looking for