Multifunction Printer Problems

My printer Lexmark Prevail 705, has been giving me some problems for some time in regards to network scanning.
The printer (scanner bed) is recognized via USB, but isnt recognized via my network. when ever i go to 'Print & Scan' i would check the share with network box, exit, then go back and it would be unchecked. This is rather frustrating.
I have a small home network and only my MBP and my PC desktop are connected to the printer/scanner.

Try download the scan center: http://bit.ly/U9RkFY

Similar Messages

  • HP LaserJet Pro M1217nfw Multifunction Printer scaner driver problem in windows 7

    I have a HP LaserJet Pro M1217nfw Multifunction Printer. Printer is ok but Scaner has problem in Windows 7 scaner driver is deleted when i try to scan it show the error " Scaner not communicate " I have to reinstall driver after few minitus again same problem . Pls advise me what is the best solution for that

    Hi KrunalPatel,
    I'll paste a link to a troubleshooting document below - from what I've read, it has the best chance at fixing your scanner errors, as it has the most steps to try
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02917811
    Please let me know how it goes
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • Problem printing MAC-PC for a multifunction printer Canon i-SENSYS MF4018

    In my office, installed a network of Macbook 466 (Mac OS X 10.6.2) and PC (WinXP SP3). We bought a new multifunction printer Canon i-SENSYS MF4018(MF4010). By PC connected multifunctional printer MF4018 (model has only a USB port).
    On the PC works well. My MAC is the printer on the network, but at the beginning of printing an error: Canon UFR II Printer Driver An error occurred.: -50. Driver downloaded on the official web-site Canon - CANONUFRIIV2.00 EN.dmg.
    Please, help set up a complete operation of the printer in my office from the MAC.
    How to make it possible to print from MAC without any errors?

    Pahu and Eliask,
    I just purchased a canon isense mf4018 for our office. We have a mac mini os x 1.5.8 and a pc windows xp sp3. we are experiencing a printing problem from the mini. we aren't using a network. we just swap the usb cable between computers when printing is needed. The error that occurs is 'load correct paper MP tray: ltr; cancel: sys. monitor.' This looks like it only happens when we print from Word for Mac when printing more than one copy of the document. Excel printed multiple copies fine. If i go to sys monitor and print status, I find the word doc option to cancel or continue print. I choose yes to cancel and it prints another copy of the doc. the error still exists. I go through that routine until all copies have been printed. Scanning doesn't work. I downloaded this driver http://software.canon-europe.com/software/0036890.asp?model=
    Thanks for the help
    Neal

  • HP Laserjet Pro M1136 Multifunction printer installation problem

    Dear Team,
    Recently purchased HP Laserjet Pro M1136 MultiFunction printer. But it is not installing HP scan software. But scanner is working by default drivers.
    Printer is not identifying when i am trying to install printer drivers.....?
    System drivers updated and USB drivers also updated. But no luck 
    HP Scan doctor also installed. But same issue. HP scan is not identying
    Printer connected to HP Omni 200 PC 5320il all in one system. 
    Windows 7 X64
    Thanks
    Solomon Dayakar G

    Hello Solomon_ganji ,
    Welcome to the HP Forums.
    I see that you are having some issues when attempting to install the scanning software.
    I suggest we start off by running the HP Print and Scan Doctor.  Please let me know if the Doctor fails as well as any error codes you may see.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Problems with adding Canon MG5320 Multifunction Printer?

         I just got a new Canon MG5320 Multifunction Printer. When I try to install the usb driver with the included CD, I am sucessful until step three where it prompts to connect the usb cable and turn it on.
         The next button is clickable until I turn on the printer. When I turn it on, a window comes up saying "Do you want to install the driver for the Canon MG5320." If you say yes, it says that it is downloading and installing it, but when it is done, it says Apple doesn't have the driver.
         If I press the next button without ever turning it on, it say that it is that the driver was installed sucessfully, but if I go to System Preferences Printers > Add new printer, I select the printer and it says that Apple has the driver, but again when it is done, it says Apple doesn't have the driver.
         Please help, I need this done in less than a week for collage.

    Install the driver from the link I gave you. Connect the printer to the Mac with the usb cable. Turn on the printer. System Preferences>Print & Fax>Add a Printer.

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Can't scan from Lexmark multifunction printer - firewall issue?

    Hi there!
    I got a Lexmark printer/scanner combo which used to work fine on my arch install. However, its mobo died, so now I'm back at another install which refuses to scan. Scanning is done through the browser via a java applet residing on the printer's webserver. The applet does start (so it's not a java issue), but refuses to receive data from the scanner. Within the printer's web interface, it reads
    If using Windows XP, the Windows XP personal firewall must be disabled before using Scan to PC profiles.
    , so I'm assuming it might be a firewall issue. Lexmark's website provides the following advice:
    The following two command lines will open the port 5353 for incoming and outgoing connections:
    iptables -I INPUT -p udp -m udp --sport 5353 -j ACCEPT
    iptables -I OUTPUT -p udp -m udp --dport 5353 -j ACCEPT
    NOTE: These steps will work on most distributions configured with IPTABLES. There is no common command to make these rules persistent.
    As I don't know anything about IP tables, I've simply copied these commands (as root, obviously). Still, I can't scan.
    So, my questions are:
    1. Has anybody else ever come across an issue like this?
    2. I don't even know for sure, whether this is a firewall issue - What iptabled magic would I need to temporarily disable the firewall to check?
    3. I tried checking my rules by "iptables -L". How can I tell "iptables -L" to specify the ports it is working on (as I did in the commands copied from lexmark's website)?
    Best wishes,
    Rufus

    Hi Bob
    I believe so.  We put the install disc into this mac back when we bought it to set up the printer.  I'm assuming the scanning drivers were there as well since it's a multifunctional printer/scanner/fax wireless printer.
    We've tried it both ways.  If I press the button scan on the printer, it reads can't find computer (or something like that).  When we go thru the HP icon on my computer screen and choose scan to computer, it does nothing.
    We don't scan that often.  So the few times when we ran into this problem, we just did something else (like take a pic from our iPhone and email the pic...kinda stupid but did the trick.
    But I want to have the function of the scanner available.  So that's why I'm here asking...thought others had this issue and had a solution.

  • HP LaserJet Pro CM1415fnw Color Multifunction Printer - CAN'T FIND ANY WIRELESS NETWORKS

    PRINTER: HP LaserJet Pro CM1415fnw Color Multifunction Printer
    OS: Windows 7
    OWNED: Over 2 years with no problems
    LOCATION/SET-UP: At my personal residence. All-in-one wireless router through cable company.
    ISSUE: All of a sudden, printer cannot find any wireless networks. Nothing has recently changed in my service provider or equipment. I know that the router and internet is not the problem because our 2 smart phones and three laptops still connect. I've triend manually setting up the network using SSID and Keyphrase but still nothing.
    HELP!
    This question was solved.
    View Solution.

    I would perform a hard reset by removing the power from the entire machienethrough the powercord for thirty seconds. Following that I would reconnect the printer to the wireless network and set a static IP/
    -Spencer 

  • HP LaserJet Pro CM1415fn Color Multifunction Printer unable to connect to webapps, webforms

    Hello,
    I'm able to print to my printer - HP LaserJet Pro CM1415fnw Color Multifunction Printer - over my local network and the printer is connected to the router via wireless connection.  No connectivity issues as far as the local network goes..
    The problem I'm having is that for the past week (perhaps longer but I only noticed it a week ago) I'm unable to download the web forms or web apps from the printer's screen menu.  I keep getting the message: Unable to connect to the network, please check your network connection etc etc etc.
    I successfully printed to my hpeprint email address, so at least the printer is connected to the eprint network, but still can't access/download any of the web forms or web apps.
    Has anyone experiencd this?  I'm really stuck, can't figure out what the issue could be seeing as how the printer seems to be working over the local network and am able to print documents that I send to me hp e-print email address.  Any suggestions or assistance would be greatly appreciated.  thanks in advance... Robert

    You're lucky to have SOME ePrint functionality left! I got a new m177fw from HP and the printer simply won't enable ePrint. I get a constant connecting screen or connection error screen. There aren't any problems with my network and I spoke with a HP customer service representative over the phone and it seems they are clueless that ePrint is currently broken on HP's end.

  • Printing problems with Safari 5.0.3

    I just bought a new HP LaserJet Pro M1536dnf Multifunction Printer to allow me to use AirPrint on my iPad and iPhone. But now I have a problem with printing Web pages from the Safari 5.0.3 browser on my Windows Vista PC to the printer over my network. The printer does not print any type or graphics on the page although it does output several nearly blank pages each time I try to print. The only mark on the pages is a faint thin gray line at the bottom of each page.
    Safari is the only program where this problem occurs. The printer works correctly with Internet Explorer, Outlook, and Word. I did not have this problem with my previous HP printer.
    The M1536dnf also prints correctly from the Safari browser on my iPad through AirPrint.
    I also tried printing in Safari on a Windows 7 laptop on the network and had the same problem.
    Any suggestions?

    I reloaded the HP drivers. But that didn't fix the problem. Because the problem is only with Safari in Windows and not Internet Explorer (nor any other Windows applications), it seems to me to be a Safari problem rather than a problem with the printer. On the other hand, Safari for Windows printed correctly on my previous HP LaserJet 1022nw and its driver. I've contacted HP and they want to lay the blame on Apple. I have reported the problem to Apple as well and have heard nothing. Once again, after paying hundreds of dollars on new equipment to be able to print from my iPad and iPhone, the user is left to fend for himself. Others seem to be having this problem. Perhaps, Apple and HP might consider working together to the benefit of the customer.
    (One bright spot: the 1536 does print from the Safari browsers on the iPad and the iPhone.)

  • Wireless printing - problem with MAC integration

    Hi everybody.
    Just bought a Macbook pro and cannot get it to recognize my printer.
    Devices within network:
    - Belkin WLAN Router
    - HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
    - Acer Notebook with XP Home (used to set up the 2101 wireless)
    - Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
    Antivirus software: Avira Premium Security Suite on both XP's
    WPA-PSK encryption, no mac filtering.
    The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
    Can anybody help?
    This question was solved.
    View Solution.

    I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket). 
    I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
    This does not work either, no Printer with "Bonjour" is offered for selection: 
    "Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
    When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
    Can you tell what I did wrong? Thanks for trying

  • I have a canon MX7600 multifunction printer. My security setting allow connection with the printer. If I disable the firewall it works fine. If the firewall is running I get a dialog box every time I print asking for permission. How do I fix this?

    I have a canon MX 7600 multifunction printer. Each  time I print I get a dialog box asking for permission to allow connections to the printer. This box stays on my screen for a few seconds, if I don't click allow I get a communication error which then requires me to delete the job and start over. I contacted Canon and proceeded with their suggestions to no avail. They now say it is an Apple issue. My security settings are set to allow connection to the canon printer. If I disable the firewall it works fine, once I enable the firewall the problem returns.  This issue is a royal pain. Any suggestions on how to fix it short of buying a new printer?

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).

    Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).  The existing driver wants me to connect the printer using USB.  The printer is in another facility I am trying to support.

    Hi,
    The HP M1212nf used the Host-Based printing language, such printing language is not recommended Citrix or Terminal Services envoirnment and not officially supported.. you may try using the Citrix UPD on the server by installing the basic driver for yor printer on the client:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3965849&task=&
    (ii) HP does not recommend installing these host-based LaserJet drivers on the Citrix server; however, the devices may function by using the Citrix UPD on the Citrix server with the HP host-based driver installed on the client. Print drivers for your product may be available within the Windows 7 operating system.
    http://support.citrix.com/servlet/KbServlet/download/10498-102-693211/Citrix%20Supported%20HP%20Prin...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Need a USB hub to work with a multifunction printer

    Can anyone recommend a reliable USB hub that can work with the HP Officejet J4580 Multifunction (fax) Printer? I bought a Belkin 7-port hub for my G4 FW800 laptop (OS 10.3.9) and it works with an older dedicated printer and a 2-year-old multifunction printer (no fax), but I just got a new Belkin 7-port to go with the same laptop and it won't work with the new multifunction, so I'll have to return it.
    Any suggestions for a 2+ port hub that's reliable and would work with this new printer? AC- or laptop powered doesn't matter, though I'd prefer to have the AC option. Amazon's web page on this says it will work with all 1.0 and 2.0 USB devices, but obviously that's wrong, and I like not to make the same mistake twice. Thanks!

    I'd have to agree with motsteve too.
    Stay away from unpowered hubs, they are nothing but trouble or should I be more diplomatic and say that they do work for some devices but not all and some unexplained behaviour has been known to happen with them.
    The same can be said of bus-powered hard drives.
    Are you sure it is not a driver problem ?
    Are you sure this MFP is compatible with the OS you are using ? Have you checked the system requirements first ?
    I think the USB hub you have is probably fine.
    If it is USB2.0 compliant and is mains powered then there is something else at work here.
    1) Check the cables - try another if you have one.
    2) Unplug the printer , turn the computer and hub off.
    3) Reconnect everything and then turn on first the printer , then the hub , lastly the computer.
    4) If 3) fails ,do the same again but in a different order.
    I have had problems with peripherals not showing on the desktop or getting a " Can't connect to device XXXX " so I have turned everything off, unplugged them all, then reconnected and turned everything back on.
    Once that peripheral is mounted once I generally find that I don't have a problem with it again.
    I think it may lie in the order that the OS extensions load or something along those lines.
    Stewie
    Message was edited by: stewiesno1

  • I have a canon multifunction printer that used to work with snow leopard but since I updated to mountain lion my printer stop working, How do I make it work again?

    I have a canon multifunction printer that used to work with snow leopard but since I updated to mountain lion it stoped working. How do I make it work again?

    This problem is not unheard of when upgrading from Snow Leopard. It is usually solved by completely deleting the existing printer in System Preferences > Print & Scan, and adding it again.

Maybe you are looking for