Multiple action buttons in same CFFORM

I've read previous posts, but the solutions there didn't prove successful. So here we go again.
I have a form called from a module called menu.cfm. On this form, I have three buttons: Reset, Continue and Return to Main Menu.
Reset and Continue work fine; I just can't get it to return to the main menu, or menu.cfm.
Here's my latest attempt:
   <table>
      <tr>
         <td>
                <cfinput type="reset" name="reset" value="Reset Fields">
         </td>
         <td>
                <cfinput type="submit" name="submit" value="Continue">
         </td>
         <td>
                <cfinput type="button" name="mainmenu" value="Return to Main Menu">
         </td>
</cfform>
All I want is the button Return to Main Menu to return the user to the menu.cfm module. I've tried validateForm and onClick, but neither worked.
Any suggestions?

Similar Messages

Recruitment: Multiple Actions on the same day

Hi expert,
Understand that in PA, we are able to perform multiple actions on the same day with the aid of Additional Actions infotype (0302).
However, in Recruitment module (i.e. PB), we are unable to perform the above, the previous action record will be deleted, thus we can't keep track of the actions taken.
Can we extend the use of Additional action infotype to Recruitment (PB db) ? or is there other way to perform multiple actions on the same day in Recruitment ?
All advises are appreciated.
cheers,
Sophie Tran.

Hi,
Please check the below link for that..
http://sap.ittoolbox.com//groups/technical-functional/sap-hr/recruitment-multiple-actions-on-the-same-day-384674
Thanks & Regards,
Sandip Biswas

Dynamic Actions with Multiple Actions Capability

Dynamic Actions with Multiple Actions Capability
How can I get Dynamic Actions to work on Actions that are stored solely on IT0302 due to the multiple relationship to a previous Action that is stored on both IT0302 and IT0000?
When multiple actions on a given day are executed, the dynamic action from the first action entered is executed twice - when it should only execute the first time with the second actions dynamic action triggering the second time.
Thanks

When there are multiple actions with the same effective date the wrong dynamic action is triggered. For example, if I have an Expat Return To Home action followed by an Internal Move action with the same effective date the below events occur:
1. IT0001 is updated due to Expat Return to Home - triggering the Dynamic Action off of IT0000 which is Expat Return to Home (Correct)
- Action is stored on IT0000 and IT0302
2. IT0001 is updated due to Internal Move - triggering the Dynamic Action off of IT0000 which is Expat Return to Home (Incorrect - background processing creates data not needed)
- Action is stored only on IT0302
Question:
How can we leverage Multiple Actions with the same effective date while continuing to use Dynamic Actions?

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

Multiple toggle buttons to the same destination causes conflicts

I'm trying to set up multiple toggle buttons so that a user can click on a button at any time and set the state of the dashboard. Each toggle button has a unique value (and each one has the same static value for both on and off) and I've mapped all the toggle buttons to the same destination cell. But they all seem to be competing to set the desination to their preferred value even when they're not being clicked on and, as a result, the dashboard keeps changing state in unexpected ways. Is there a fix for this?

When you have multiple components trying to insert to the same destination cell, the front-most object wins at load time. So, if tb1, tb2, tb3 (tb3 being the front-most object) are all set to respectively insert values 1, 2, 3 to the same cell, the cell will have value 3 initially.
Now there is an issue when objects in different groups try to insert to the same cell. The release note for FP3 implies that this problem is resolved, but I think it is not fixed completely...

Problem running multiple folder actions at the same time

Hi,
Does anyone have some experience running multiple folder actions at the same time?
I've written a Applescript folder action that processes some files. When adding some files, the script starts and all goes well. The processing of each file takes a few minutes, but all files are processed correctly.
However, when adding some new files to the dropfolder, while the folder action is all ready processing other files dropped a few minutes earlier, the process that is all ready running immediately aborts and the folder action is relaunched on the new files, leaving the old files for what they are...
The same problem occurs with multiple folders, each having a folder action attached. When dropping files in "Folder A", the script starts processing. But if someone droppes files in "Folder B", The script of folder A aborts, and the script of folder B starts processing. When adding more files to the folders, the result is the same. In some casses, when the last dropped files are processed, the os continues where the operation was aborted on the previous files. But this not always happens. To make things worse, when you remove the items from the folders afterwords, the folder actions starts running again on items no longer present in the folder !!!!
Does anyone know how I can prevent the folder action being aborted when new files are dropped and placing the new files in "Hold", until the previous files are processed? How can I prevent a folder action being aborted when a item is dropped into another folder?
I've written a small script to test this behaviour. Just create one or more folders and attach the script below. Drop a item into the folder, wait a few seconds and drop another one in the same or another folder. To monitor what happens please check the console.
on adding folder items to this_folder after receiving added_items
          set FolderName to this_folder as string
          set ItemName to added_items as string
          repeat with theIncrementValue from 1 to 15
delay 2
                    do shell script ("logger \"Folder: " & FolderName & " - Item: " & ItemName & " - Step: " & theIncrementValue & "\"")
          end repeat
          do shell script ("logger \"Folder: " & FolderName & " - Item: " & ItemName & " - Done...\"")
end adding folder items to
Thanks for any feedback.

That is pretty much the way Folder Actions work, especially since AppleScript is not multi-threaded. If you are using them as some intermediate step in a workflow, you might rethink the way you are handling the files (for example, use a droplet instead). Other options would be using launchd to watch a path or a shell script on a different thread.

Running multiple batch actions on the same folder? One Click?

We run Actions on a group of images using CS4 with the File->Automate->Batch function. We use this to take, for example, 200 images from a set folder and run an "Action" to create a rendered 2D design and save it in a different location to the source image and add an extension to the file name, leaving the source image unaltered.
The problem is that we then require to run this 20 times, each time, the difference is :- we want it to save to a different location and the "action" used is different because it changes the colour for example.
The desired output is:
FROM A JPEG ---> 20 folders (named as 20 different colours) and all our images rendered (as in our action) and saved into the 20 folders
So we have 20 versions of each image
Currently we simply set off the different actions in a batch separately, IE. 20 lots of batches to set off.
So for example:
* We have 200 jpeg images in folder [A]
* We run a Batch function to run an "action" on all 200 images in folder [A] to render into our design and add a blue colour overlay (this is all done in the action itself) and to save them to folder [B] with the extension (BLUE) added to the filename.
* Once Photoshop finishes running this Action on the 200 images (wish it would beep or something to let you know it was finished) we then run a batch to run a different "action" on the same 200 images in folder [A] to render the design and add a pink overlay and to save them in folder [C] with the extension (PINK) added to the filename
And so on and so forth for the 20 different actions.
Is there a way we can instruct Photoshop to run all of these 20 actions (one after the other in a queue as it where) without having to "Babysit" Photoshop and ask it to run each one off ourselves manually?
Would we have to use JavaScript for this? We have no experience with JavaScript at all.
We are currently using Photoshop CS4, is there a easier way to do this on CS5 or CS6?
Kind Regards and Thanks in advance
Steven

Would we have to use JavaScript for this?
I think it would be advisable but (if you don’t mind risking getting less help) you could use VB or AppleScript depending on your platform.

Multiple actions for same condition in fault-policies.xml

All,
I have a requirement where I need to perform the following steps when a remote/binding/run-time fault occurs:
1. Log the fault details into the DB (performed in the catch block)
2. Email the fault details to the Admin (performed in the catch block)
3. Recover the process manually in the EM console by performing a <action ref="ora-human-intervention"/>
Hence, I would assume I would need to re-throw the fault first to the catch block first and then manually intervene:
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>
</condition>
<condition>
<action ref="ora-human-intervention"/>
</condition>
</faultName>
I also reversed the order to manually intervene first and then re-throw the fault but that too isn't working.
But it does not perform both these actions. At any given point, only one action is performed for a given condition. How do I achieve both a re-throw and a manual intervention actions for the same fault condition?
Thx!

I had a similar requirement recently - almost exactly the same.
There are a couple of ways you could do this:
1) Use a Java Action Fault Policy to chain the event actions - http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bp_faults.htm#sthref1013
2) Use assertions on the invoke partnerlink (Synchronous) or reply (asynchronous).
I did get this working but it was quite tricky.

Multiple accounts on the same resource

Experts,
I am trying to create multiple accounts for the same IDM user.
I have written a workflow which calls the subprocess to create multiple accounts. In the orignal workflow I pass the IDM accountId and the target system accountid in the Iterate loop.
In the subprocess i am checking out the user view then appending the resource specific parameters (mentioned below) and then checking in the view.
<Activity id='1' name='Add resource to user object'>
<Variable name='userObject'/>
<Action id='1' name='CheckOut User View' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='User'/>
<Argument name='id'>
<ref>userId</ref>
</Argument>
<Argument name='TargetResources' value='EDS'/>
<Argument name='authorized' value='true'/>
<Argument name='Form' value="Empty Form"/>
<Variable name='view'/>
<Return from='view' to='user'/>
</Action>
<Action id='2' name='Add Attribute'>
<expression>
<block>
<set name='applicationuserid'>
<invoke name='get'>
<split>
<ref>userid_applicationid</ref>
<s>#</s>
</split>
<i>0</i>
</invoke>
</set>
<set name='resourcename'>
<invoke name='get'>
<split>
<ref>userid_applicationid</ref>
<s>#</s>
</split>
<i>1</i>
</invoke>
</set>
<set name='user.waveset.resources'>
<appendAll>
<ref>user.waveset.resources</ref>
<list>
<s>RACF</s>
</list>
</appendAll>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].created</s>
</concat>
<s>true</s>
</set>
<set>
<s>waveset.accounts[RACF].id</s>
<get>
<invoke name='getObject'>
<invoke name='getLighthouseContext'>
<ref>WF_CONTEXT</ref>
</invoke>
<s>Resource</s>
<s>RACF</s>
<Map>
<MapEntry key='action' value='update'/>
</Map>
</invoke>
<s>id</s>
</get>
</set>
<set>
<concat>
<s>user.accounts[</s>
<s>RACF</s>
<s>].name</s>
</concat>
<s>RACF</s>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].gapracfid</s>
</concat>
<ref>applicationuserid</ref>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].identity</s>
</concat>
<concat>
<s>uid=</s>
<ref>applicationuserid</ref>
<s>,ou=racf,ou=Applications,dc=gap,dc=com</s>
</concat>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].firstname</s>
</concat>
<ref>user.accounts[Lighthouse].firstname</ref>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].lastname</s>
</concat>
<ref>user.accounts[Lighthouse].lastname</ref>
</set>
<set>
<concat>
<s>user.accounts[</s>
<ref>resourcename</ref>
<s>].fullname</s>
</concat>
<ref>user.accounts[Lighthouse].fullname</ref>
</set>
</block>
</expression>
</Action>
<Action id='3' name='Check In User View' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkinView'/>
<Argument name='view' value='$(user)'/>
<Argument name='authorized' value='true'/>
<Argument name='Form' value="Empty Form"/>
</Action>
<Transition to='end'/>
<WorkflowEditor x='244' y='48'/>
</Activity>
When i run this in the IDM I can see all the entries but only first one is actually created on the target resource. When I open the user object in IDM and hit Save button IDM creates the accounts on the target system.
I have already tried by using the refresh view just before the checkin view action but no luck..
Any help for solving this problem would be appreciated.
Thanks

Thanks for the reply... in my case this would be done by the active synch process so no GUI form is required. I will be getting a list of application ID for the user by LDAP AS. One i get it i will have to parse it and get the list of application user id. I am passing those ID;s to a workflow where I am forming the resource name as you mentioned
for example:
If i get user1#user2#user3 from AS i am separating them based on # using split and getting 3 different user id;s
now i am forming a string with the resource name and passing it to the sub process in which i am checking out the user object, setting the user attributes and checking in the new view.
user1#LDAP
user2#LDAP|1
user3#LDAP|2
Problem ; When i run this user1 is getting created in LDAP but user2 and user3 are not. There entry is getting created in IDM.
When I open the IDM object I get a yellow triangle (warning) and if I open the user object and hit save button IDM creates the user account on the LDAP.
any help for further solving this problem would be appreciated.
Regards,

How to apply multiple actions on a single file in one go to generate multiple watermarked pdfs?

usually i need to create many watermarked datasheets for different customers using a single base pdf. currently i run individual actions for individual customers on the same file which means i have to runs 10s of individual actions every time i have new source file. can i make a single action or a script which will take a single source file, run multiple actions(~15-20) for watermarks and save these files separately? basically what i need is instead of running many individual actions i run a single action/script to make it automatic. if yes, how to do so?

Hi Monte,
You can achieve this by assigning a secondary extension to another button, but this might not be what you want, so if you can elaborate a little further as to what you want exactly I can help you with putting together a solution
Cheers,
David Trad.
**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) **

Names of objects for multiple actions in different slides

I am trying to develope an interactive software guide which
requires something like a panel to insert it in each slide. This
panel contains precise instructions on how tu use the interface
visible in the current slide.
The problem is that sometimes the panel hides part of the
interface. I would like to have a button somewhere in each slide so
that the student can simply hide the panel when is obscuring
something important. I don´t have any problem for preparing
one panel for one slide using multiple actions for hiding or
showing the panel, captions, buttons, etc. But the problem is that
in each slide the similar objects have different names assigned
automatically by Captivate. I found no way to assign same names in
different slides so that afterwards, assigning multiple actions
would be only a matter of copy and paste from slide to slide. I
tried to think something with variables but I gave up.
I am using Captivate 4 Trial. Somebody has a nice good idea?
:)

Hi,
Inorder to give same name to the objects in different slides,
there is a workaround. Immediately after opening a project, give
the same name to the objects in different slides.
Hope this solves your problem.
thanks
ravi

Is there a way to delete multiple pictures at the same time from the iphone4s?

Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks

Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

Creation of new button on same page after insert command

Hello All,
I have an application running on apex.oracle.com where my workspace name is shruti_work,username is [email protected] and password is buwigi. The application name inside this is "app2"
I am trying to achieve one functionality there but unable to get it so felt like seeking an help from experts here. I have two forms there one page1 form which is simplly made on an html region with go button which is navigating the page 1 items value to page 2 but simply passing their address witout updting the database table.
In Page 2 i created page on a table or view, which made some extra buttons which i dont want like applychanges ,delete button, cancel button. I created a create button even which is updating my database with insert sql command. What i am seeing is after my create button is pressed i got navigated to same page 2 which i want to but the applychange button, cancel and delete button got appeared. I dont get the idea why it is so. i have checked the buttons even i didnt found anything there.
All i want is when i press create button in page 2, my database get update and at the same page (2) a new button get appears which i have to use for other things. Approaching to this solution i created a button with giving databse action update and condition to this button "value of item in expression 1 is not null" and in expression 1 i passed p2_id...... but my new button is not getting created.
Any help on this?

Hi Jeff,
I dont want applychanges button and delete button in my page 2. But when i created form on a table or view this but got created and i cannot delete it even. When i am navigating my page from page 1 to page 2 and filling the fields in page 2 and clicking create button, at that time i want after updating my table and running my plsql process which i have created which you can see in page processing, my button at same page get generate which i will use to navigate to other form. This button which i want to generate after clicking my create button will be meaningful only if my record get inserted in table. so that is why i want it at that time.
I dont want any report so i am not creating form on a table or view

Issues with POWL action buttons and row selection after Support Packs

We recently applied ECC 603 Support Stack 16 to our environment and are having problems with some SAP standard POWL lists (example is KYKOP-OPS-MM-PO-W: Purchase Orders for Goods Receipt). In fact all of the POWL lists that we are using are behaving the same way. There are 2 changes that have happened after moving to this stack.
1. In order to select a row in the list, we now have to press ctrl + click, previously, just clicking the the row would select it and fire the OnLeadSelection
2. All of the Action Buttons in the POWL lists are disabled.
I have debugged the Feeder Class /KYK/CL_MM_FEEDER_PO and see in th GetActions method and see that the ls_actions-enabled is getting set to true, but for some reason the buttons are disabled when the list is rendered.
I've checked a side-effects report from OSS and have come up empty handed. Has anyone else run into this?
Eric

I have found an OSS note that addresses this problem. This problem will effect anyone who is using ALV for ABAP WebDynpro after applying BASIS Support Pack 20 for 7.0. The OSS note is 1363334. Question Answered.

How do I have multiple accounts on the same computer

how do I have multiple accounts on the same computer? The idea of ", hold down the option (on a Mac)/ shift (on a PC) key each time you start iTunes" does not seem to work for me. Thanks.

Create multiple Windows User Profile with each managing his own iTunes account and library.
To create a user account on Windows 7:
To open User Accounts, click the Start button , click Control Panel, under 'User Accounts and Family Safety', select Add or Remove User Accounts.
Click Create a new account.
Type the name you want to give the user account, click an account type(make sure to give Administrator), and then click Create Account.

Multiple action buttons in same CFFORM

Similar Messages

Maybe you are looking for