Multiple COREid environment with ADS

We have COREid Identity and Access 7.0.4 for Windows installed. All the COREid Identity and Access metadata is stored in Active Directory 2003. Lets say our AD is called AD Production.
We now want to setup another COREid Identity and Access 7.0.4 environment for testing purpose. Would it be possible to install COREid Identity and Access such that I can continue to use my AD Production for user accounts and have the COREid access policy information stored in a different AD such as AD Testing.

Technically Yes it is possible. but you will have lot of operation challenge especially if its really a Production environment, you are opening up whole can of worms for some one in development to create users in production. that aside,
when you install COreID you can give the directory name pointing to Production and when you install Access you can give directory name pointing to test AD.
much easier operation would be , install a clean install of Coreid in test, and create LDIF from AD-Production of users and import to test-AD.
YOu can even migrate all the Accces policies from AD-Prod to AD-Test and then start modifying the AD-Test, and once tested completely, you can migrate from AD-Test to AD-Prod.
Thanks
Ram

Similar Messages

How to configure multiple dev environment in single IP

HI,
I have a WLS running on a Windows NT machine. I want to configure multiple partition/environment
in that single WLS so that each user will have their own partition/environment to
play around. Once they are happy with their EJBs then we shall move them to a testing
environment. Is that possible in WLS??. Can anyone please guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i want is that in a single ip i wanna
multiple development environment.

Tom,
looks like you are specifying http protocol in
sky.framework.ejb.SkySessionBean.getInitialContext method.
Change it to t3 or, if the JNDI lookup is in the same JVM, don't specify
PROVIDER_URL. If you have to use http tunneling due to any reason , you have to
enable HTTP Tunneling in server to which initial context is created. It is
disabled by default in 60. You can do so via console. Please refer to
documentation , let me know if you need additional help.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Tom Purcell wrote:
Kevin,
You said that with 6.0 the following happens:
On the second server I get an error when I do
http://host:secondServerPort/index.html
Is this the error you get on the Admin Server:
<Feb 28, 2001 12:42:24 PM EST> <Info> <HTTPTunneling> <Login rejected with
code: 'Failed', reas
on: You are trying to use http tunneling
The server will not let you connect'>
<Feb 28, 2001 12:42:24 PM EST> <Error> <HTTP> <Problem dispatching servlet
request
weblogic.common.T3Exception: You are trying to use http tunneling
The server will not let you connect
at weblogic.socket.TunnelLogin.rejectConnection(TunnelLogin.java:87)
at weblogic.socket.TunnelLogin.service(TunnelLogin.java:59)
at
weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
467)
at
weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:638)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
And on the Managed Server:
<Feb 28, 2001 12:42:24 PM EST> <Error> <ConnectionManager> <Could not
connect to: '0S:127.0.0.1
:[-1,7001,-1,-1,-1,-1,-1]'
java.net.ProtocolException: Tunneling result unspecified - is the HTTP
server at host: 'localho
st' and port: '7001' a WebLogic Server?
at
weblogic.rjvm.http.HTTPClientJVMConnection.handleNullResponse(HTTPClientJVMC
onnectio
n.java:152)
at
weblogic.rjvm.http.HTTPClientJVMConnection.connect(HTTPClientJVMConnection.j
ava:194)
at
weblogic.rjvm.http.HTTPClientJVMConnection.createConnection(HTTPClientJVMCon
nection.
java:98)
at weblogic.rjvm.Protocol.createConnection(Protocol.java:207)
at
weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.jav
a:997)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:364)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:330)
at
weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:228)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:188)
at
weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:180)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:149)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:232)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:174)
at
weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
ory.java
:123)
at
javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:668)
at
javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at
sky.framework.ejb.SkySessionBean.getInitialContext(SkySessionBean.java:112)
at
sky.framework.ejb.SkySessionBean.setSessionContext(SkySessionBean.java:94)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanImpl.setSessionCo
ntext(Sk
yReferenceSessionBeanImpl.java:87)
at
weblogic.ejb20.internal.StatelessEJBHome.createBean(StatelessEJBHome.java:22
9)
at
weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.jav
a:90)
at
weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:7
5)
at
weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:67)
at
weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:113)
at
weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java
:55)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl.setDataSou
rce(SkyR
eferenceSessionBeanEOImpl.java:22)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl_WLSkel.inv
oke(SkyR
eferenceSessionBeanEOImpl_WLSkel.java:161)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:103
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
7)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Thanks,
Tom
<Feb 28, 2001 12:42:24 PM EST> <Info> <ConnectionManager> <Bootstrap unable
to get a: 'Protocol
: 'http'' connection to: 'localhost/127.0.0.1' on port: '7001'>
"Kevin Apte" <[email protected]> wrote in message
news:[email protected]...
This advice applies to WL5.1. I have been trying to configure a
multiinstance Weblogic with no success. I want multiple copies
of the sample petStore available for test by multiple users.
I think in 6.0
You would need to open an admin server
Open the configuration file for say PetStore.
Clone the petStore- call it petStore2. .
Create a copy of the startup script and modify it to start PetStore2.
After doing this only one config.xml is created for both servers.
I am able to start the first server and view the petStore application,
On the second server I get an error when I do
http://host:secondServerPort/index.html
How does one create multiple instances in WL6.0 using the console
or using a XML editor ?
Jesse E Tilly <[email protected]> wrote:
[This followup was posted to weblogic.developer.interest.management
and
a copy was sent to the cited author.]
In article <[email protected]>, [email protected]
says...
HI,
I have a WLS running on a Windows NT machine. I wantto configure multiple partition/environment
in that single WLS so that each user will have theirown partition/environment to
play around. Once they are happy with their EJBs thenwe shall move them to a testing
environment. Is that possible in WLS??. Can anyoneplease guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i wantis that in a single ip i wanna
multiple development environment.
NT isn't a multiuser environment. I will assume that
you mean some
Win32 box sitting in a room where people can copy their
classes/EJBs and
test their stuff. If this is the case, the setup is easy.
Create a directory and startup script for every developer.
Have a
global properties file in the same directory as the scripts
so that
common settings are, well, common. Tell each user to
modify the various
parts of the properties files in their directories to
deploy EJBs and
register servlets, etc etc.
In each startup script, you will have to specify the server
directory
and the binding port for each person. Pick a port (something
easy to
remember and high, like 30000, 30001, etc etc) for each
person. Why?
Well, when they connect to the app server, they'll know
they're hitting
only their server. Also, TCP/IP won't let more than one
JVM bind to the
same port, so if you want simultaneous instances (> 4
you better have
one kick ass Win32 box) you have to do this.
Hope this solves your problem.
JT
Senior Developer, HotelTools INC
[email protected]

Installing Multiple Operating Systems with grub and Arch Linux

NOTE: Please keep in mind that there are many different ways to achieve this same result using various loop and ramdisk methods, read this with a separate window to jot down your comments and suggestions... this is ongoing for me so any help would be appreciated!
Read the full article at Install Multiple Os without cds
This is my first post and I plan on making this topic an official HOWTO with www.tldp.org.
I have been into the computer security scene since 1990, but I realized that I had very little experience with the various LInux, Unix, and alternative Operating systems out there.
I have a CD-RW drive but being a struggling computer security researcher I had no money for blank cd-recordables. What follows is how I managed to install various operating systems on my computer (1 hard drive) without having to burn to a CD the ISO and then boot from that.
I first partitioned my 120GB harddrive into 10 partitions, the 2nd partition is a small swap and the last partition is extra large because it holds all the ISO images..
I then wrote a small shell script to automatically download (I love wget!) the following.
OpenBSD
IpCOP
Libranet
Arch-Linux
Fire
Local Area Security
Packet Master
Devil-Linux
FreeBSD
Knoppix
Helix
Gentoo
Yoper-Linux
NetBSD
RedHat
Slackware
The script also downloaded Installation manuals and md5 checksums.. (let me know if I should post... its pretty unsophisticated
I installed Slackware (personal favorite) on hda1 using my last blank CD-R, note that I do not have a separate boot partitino. (Should I?). I also installed grub on the MBR. I love grub, if you read through the man pages and all info you can find about grub, you can learn a whole lot. Grub has much more features and capability than lilo, even though lilo comes installed by default with slack.
I organize my kernel situation as follows... In my /boot directory, I mkdir KERNEL, CONFIG, MAP, INITRD and that is a good way for me to keep my kernels and everything organized.. Another good way is a separate dir for each new kernel.
Since Arch-Linux is a solid distro, I'll use that as a first example.
Here is the Arch-Linux section of my shell script
goge Arch-Linux
$w http://puzzle.dl.sourceforge.net/sourceforge/archlinux/arch-0.6.iso
$w http://unc.dl.sourceforge.net/sourceforge/archlinux/arch-0.6.md5sum
$w http://www.archlinux.org/docs/en/guide/install/arch-install-guide.html
md55
cat arch-0.6.md5sum
md5sum arch-0.6.iso
md55
The first thing to do is to mount the downloaded ISO image so we can use it as if it were an actual CD.
mount -t iso9660 -o ro,loop=/dev/loop0 cdimage /mnt/cdrom
Where cdimage= the ISO image. EX. /usr/local/src/ISO/Linux/Arch-Linux/arch-0.6.iso
This mounts the iso as /mnt/cdrom.
Next you need to copy /mnt/cdrom to a separate partition for the booting process. So mkfs.ext2 /dev/hda9. ( I prefer reiserfs or even XFS to ext but if you use something other than ext2 you could run into some problems because some of the installation kernels and initrds don't include support for reiserfs and so can't recognize the files. Although you could use mkinitrd to create a new initrd with reiserfs support, that might be pushin it IMO... I use the 9th partition consistently for this. I know there is a "right" way to copy the /mnt/cdrom files so everything stays the way it is supposed too, using tar or cpio, but I'm lazy so I just do cp -rp.
(What is the tar or cpio commands to copy with correct permissions etc??)
So you mount the 9th partition as whatever, say /mnt/hd and then copy the files. Now what?
Now edit your /boot/grub/menu.lst file to include the specific options to boot arch-linux installation.
A good idea is to find the isolinux.cfg file somewhere on the distro cd, this will tell you what to include in the menu.lst.
Here is the section in my menu.lst
title Arch Install
root (hd0,8)
kernel /isolinux/vmlinuz load_ramdisk=1 prompt_ramdisk=0 root=/dev/rd/0
initrd=/isolinux/initrd.img
This should be self-explanatory. The root (hd0,8) is pointing to partition 9. So the rest of the commands start from partition 9.
When you experience problems, remember you can always edit the grub boot options by typing 'e' and then edit the section. Also, a good idea is to include several variations in your menu.lst so you can easily try other ways to boot efficiently. And, remember to read up on all the installation guides that come with your distro, specifically, hard-disk installs.
There are special cases, Gentoo, has a semi-new compressed filesystem called squashfs. BTW, this is AWESOME, so check it out. It has to be compiled into the kernel, so some work is in order, but use this recompile to optimize your kernel. You can get the squashfs patch for almost any kernel. I use the latest stable 2.6 kernel. Squashfs is incredible and although I don't think you need it to install from ISO, you do need it to expand the livecd.squashfs filesystem that comes with the cd.
Heres a sample Gentoo section from my menu.lst
title Gentoo Install
root (hd0,8)
kernel /isolinux/gentoo root=/dev/ram0
initrd=/isolinux/gentoo.igz init=/linuxrc acpi=off looptype=squashfs loop=/livecd.squashfs cdroot vga=791 splash=silent
A nother' tip is the shell that is provided if you experience problems, typically busybox or ash. The key tools to get you going from here is mount and chroot. Sometimes you will need to manually create a simulated file system and then chroot into it. For instance, you might have to create boot, etc, bin, directories on the target partition.
I generally install each OS onto the next partition (careful of the logical partition) and add it to my menu.lst after install. A good idea is after installation, copy the kernel and initrd(if there is one) to the slackware(or whatever) boot partition on hda1. I copy kernels to /boot/KERNEL/ and initrd's to /boot/INITRD, then menu.lst is more organized...
You then need to add an updated section to your menu.lst (just comment out the install section for later)
Here is the finished arch-linux section from menu.lst
title Arch Linux 6
root (hd0,2)
kernel /boot/vmlinuz26 ro root=/dev/hdc3
This doesn't use my convenient boot/KERNEL/vmlinuz26 as you can tell by setting the root to partition 3.
***NOTE: Make a backup of MBR using dd and save to floppy, also backup the partition table to floppy, using cfdisk or parted. And boot disks (I use 1 with grub, and 1 with slack, and tomsbootdisk) will invariably come in handy. Tomsbootdisk is recommended, and make the grub boot disk when you install grub. install to floppy.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The final result after some fun experimenting, is when I boot, I have a cool grub boot screen come up with the option to boot into whatever OS I want, this is handy for multiple reasons. One good thing to do after this is to port scan and vuln scan each OS, after you update of course. Write this stuff down and you will know the weaknesses/strengths of the various OS's.
I can boot a custom Firewall, snort, or multiple honeypots using this procedure, as well as a graphical kde environment with a kernel optimized for graphics and my processor/architecture, or an environment devoted to forensics or even an environment suitable for programming.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
P.S. Some of the cooler alternative operating systems are BeOS 5, EOS, ER_OS, V2_OS, and my personal favorite Menuet. Menuet is 100% assembly graphical operating system that fits on a floppy. Its f'in money!
This should be a good enough example to get you started, this kind of thing should be learned and not just copied... Knowing how to do this stuff could prove to be exceptionally useful...

Start by reading all the articles built-in on your Mac - Help > Mac Help, search "printer sharing."
http://desk.stinkpot.org:8080/tricks/index.php/2008/04/how-to-print-to-a-cups-se rver-from-mac-os-x/
http://www.macosxhints.com/article.php?story=20080324224027152&query=share%2Bpri nter
http://members.cox.net/18james/osxprintersharing.html
http://ubuntuforums.org/archive/index.php/t-56940.html

RE: multiple named objects with the same name andinterface

David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

I am receiving a lot of pop-up ads on website pages. It has only recently started happening. They open new windows with ads for online gambling, online dating and other things. They are annoying and I want them shut off. Please help me

I have recently started seeing millions of pop-up ads on website pages. It is not something that normally happens. They open new windows with ads for online gambling, online dating among other things. I am growing sick and tired of these ads, and have tried multiple things. I have uninstalled and reinstalled software, I have blocked pop-up ads and unenabled Java script. I have tried everything I could find, but nothing has worked. I have even downloaded AdBlock and Clean Genius. Nothing has even remotely changed this annoying trait. I hope this can be a quick fix I can perform and not something that will have to be done by a tech-hand. Please, if you know anything about this issue, let me know how to fix it.
Thanks.

Unfortunately, you have installed malware by clicking on a pop up ad.
Removal instructions here >> The Safe Mac » Adware Removal Guide
Uninstall CleanGenius > Mac App uninstaller: How to uninstall the Macintosh applications with CleanGenius uninstaller on Mac OS X?
Third party maintenance utilities are not necessary on a Mac and can actually do more harm than good and cannot remove malware > Mac App uninstaller: How to uninstall the Macintosh applications with CleanGenius uninstaller on Mac OS X?

Multiple File Upload With Metadata Using REST

hi all
I want to upload multiple files with metadata to document library using REST API. I am using this msdn article
http://msdn.microsoft.com/en-us/library/office/dn769086(v=office.15).aspx for uploading file. I am able to upload single file to document library but it is not working for multiple file. when I select multiple file it is uploading last selected file. can
anyone help with this. I am using office 365 environment.
Thanks in advance

Hi,
According to your post, my understanding is that you wanted to use the REST to upload multiple files.
Per my knowledge, the REST API is not supported for uploading multiple files via a single call.
You can write your own loop to upload multiple files via an individual call.
http://sharepoint.stackexchange.com/questions/108525/multiple-file-upload-with-metadata-using-rest/108532#108532
More reference:
http://sharepointfieldnotes.blogspot.com/2014/04/uploading-documents-and-setting.html
http://www.shillier.com/archive/2013/03/26/uploading-files-in-sharepoint-2013-using-csom-and-rest.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Multiple report servers - with different uifont.ali

Can we have multiple report servers with different NLS_LANG?
They all should be started as windows service. Also I would like to have them look at different uifont.ali. The reason is that we want to have the same report run with different fonts in different languages. This way I can map the fonts in uifont.ali as I want.
Is it possible?

I don't think this is possible with multiple reports servers with one Oracle 9iAS home. You will have to install multiple 9iAS, in different Oracle homes.
This also means that you have different URL's (port numbers) for the two environments.
I have used this configuration before to install a test and production environment on one web server. Changing the conf files, variables etc. in the test environment doesn't influence the production environment that way.

Multiple SAP Systems with one Unique ID

Hi,
SAP recommend to have <sidadm> and <sapserviceSID> user account for each system.
Currently we create domain users for each SAP System. We are installing many test servers and trying to see if I can avoid creating domain user account for each system and use only one account to administer all test sap systems.
Just wanted to know if there is any way to have one domain SIDADM user id and one domain SAPService user account to run multiple test SAP systems?
Thanks,

Hi,
Multiple test system you have different SID. so you must use different SAPserviceSID user. But you can use one SIDADM user with the proper permission with other test systems.
I have used in OS400 environment with single SIDADM user id.
please check with users with permission sap notes or document.
But SAP not recommanded this.
Thanks and Regards,
Jibin.

JNDI Lookup for multiple server instances with multiple cluster nodes

Hi Experts,
I need help with retreiving log files for multiple server instances with multiple cluster nodes. The system is Netweaver 7.01.
There are 3 server instances all instances with 3 cluster nodes.
There are EJB session beans deployed on them to retreive the log information for each server node.
In the session bean there is a method:
public List getServers() {
List servers = new ArrayList();
ClassLoader saveLoader = Thread.currentThread().getContextClassLoader();
try {
   Properties prop = new Properties();
   prop.setProperty(Context.INITIAL_CONTEXT_FACTORY, "com.sap.engine.services.jndi.InitialContextFactoryImpl");
   prop.put(Context.SECURITY_AUTHENTICATION, "none");
   Thread.currentThread().setContextClassLoader((com.sap.engine.services.adminadapter.interfaces.RemoteAdminInterface.class).getClassLoader());
   InitialContext mInitialContext = new InitialContext(prop);
   RemoteAdminInterface rai = (RemoteAdminInterface) mInitialContext.lookup("adminadapter");
   ClusterAdministrator cadm = rai.getClusterAdministrator();
   ConvenienceEngineAdministrator cea = rai.getConvenienceEngineAdministrator();
   int nodeId[] = cea.getClusterNodeIds();
   int dispatcherId = 0;
   String dispatcherIP = null;
   String p4Port = null;
   for (int i = 0; i < nodeId.length; i++) {
    if (cea.getClusterNodeType(nodeId[i]) != 1)
     continue;
    Properties dispatcherProp = cadm.getNodeInfo(nodeId[i]);
    dispatcherIP = dispatcherProp.getProperty("Host", "localhost");
    p4Port = cea.getServiceProperty(nodeId[i], "p4", "port");
    String[] loc = new String[3];
    loc[0] = dispatcherIP;
    loc[1] = p4Port;
    loc[2] = null;
    servers.add(loc);
   mInitialContext.close();
} catch (NamingException e) {
} catch (RemoteException e) {
} finally {
   Thread.currentThread().setContextClassLoader(saveLoader);
return servers;
and the retreived server information used here in another class:
public void run() {
ReadLogsSession readLogsSession;
int total = servers.size();
for (Iterator iter = servers.iterator(); iter.hasNext();) {
   if (keepAlive) {
    try {
     Thread.sleep(500);
    } catch (InterruptedException e) {
     status = status + e.getMessage();
     System.err.println("LogReader Thread Exception" + e.toString());
     e.printStackTrace();
    String[] serverLocs = (String[]) iter.next();
    searchFilter.setDetails("[" + serverLocs[1] + "]");
    Properties prop = new Properties();
    prop.put(Context.INITIAL_CONTEXT_FACTORY, "com.sap.engine.services.jndi.InitialContextFactoryImpl");
    prop.put(Context.PROVIDER_URL, serverLocs[0] + ":" + serverLocs[1]);
    System.err.println("LogReader run [" + serverLocs[0] + ":" + serverLocs[1] + "]");
    status = " Reading :[" + serverLocs[0] + ":" + serverLocs[1] + "] servers :[" + currentIndex + "/" + total + " ] ";
    prop.put("force_remote", "true");
    prop.put(Context.SECURITY_AUTHENTICATION, "none");
    try {
     Context ctx = new InitialContext(prop);
     Object ob = ctx.lookup("com.xom.sia.ReadLogsSession");
     ReadLogsSessionHome readLogsSessionHome = (ReadLogsSessionHome) PortableRemoteObject.narrow(ob, ReadLogsSessionHome.class);
     status = status + "Found ReadLogsSessionHome ["+readLogsSessionHome+"]";
     readLogsSession = readLogsSessionHome.create();
     if(readLogsSession!=null){
      status = status + " Created ["+readLogsSession+"]";
      List l = readLogsSession.getAuditLogs(searchFilter);
      serverLocs[2] = String.valueOf(l.size());
      status = status + serverLocs[2];
      allRecords.addAll(l);
     }else{
      status = status + " unable to create readLogsSession ";
     ctx.close();
    } catch (NamingException e) {
     status = status + e.getMessage();
     System.err.println(e.getMessage());
     e.printStackTrace();
    } catch (CreateException e) {
     status = status + e.getMessage();
     System.err.println(e.getMessage());
     e.printStackTrace();
    } catch (IOException e) {
     status = status + e.getMessage();
     System.err.println(e.getMessage());
     e.printStackTrace();
    } catch (Exception e) {
     status = status + e.getMessage();
     System.err.println(e.getMessage());
     e.printStackTrace();
   currentIndex++;
jobComplete = true;
The application is working for multiple server instances with a single cluster node but not working for multiple cusltered environment.
Anybody knows what should be changed to handle more cluster nodes?
Thanks,
Gergely

Thanks for the response.
I was afraid that it would be something like that although
was hoping for
something closer to the application pools we use with IIS to
isolate sites
and limit the impact one badly behaving one can have on
another.
mmr
"Ian Skinner" <[email protected]> wrote in message
news:fe5u5v$pue$[email protected]..
> Run CF with one instance. Look at your processes and see
how much memory
> the "JRun" process is using, multiply this by number of
other CF
> instances.
>
> You are most likely going to end up on implementing a
"handful" of
> instances versus "dozens" of instance on all but the
beefiest of servers.
>
> This can be affected by how much memory each instance
uses. An
> application that puts major amounts of data into
persistent scopes such as
> application and|or session will have a larger foot print
then a leaner
> application that does not put much data into memory
and|or leave it there
> for a very long time.
>
> I know the first time we made use of CF in it's
multi-home flavor, we went
> a bit overboard and created way too many. After nearly
bringing a
> moderate server to its knees, we consolidated until we
had three or four
> or so IIRC. A couple dedicated to to each of our largest
and most
> critical applications and a couple general instances
that ran many smaller
> applications each.
>
>
>
>
>

Configuring Multiple Campus Environment

Hi,
Being fairly new to IS-HER, I need your valuable inputs for configuring an existing campus structure to incorporate multiple campus environment.
I have the requirement as below:
1. We are coming up with a new campus in a different location. So there will be 2 campuses C1 and C2 (new).
2. Both campus should come under one Institute.
3. C1 & C2 may or may not have same academic calendar.
4. C1 & C2 must have 2 intakes per academic year.
5. C1 & C2 may offer same or different courses.
6. Student from C1 should have the flexibility to attend courses offered in C2 if the same is not available in C1. In such a case, final transcript should only get generated with C1.
Can I go ahead with below structure/Objects:
3 Org. Units -[ C1/C2 reporting to P1]
2 Acad. Cal. -[C1 uses CA1 and C2 uses CA2]
Programs independent of Acad. Cal.
Please suggest the best structure for multiple campus environments.
Regards.

Hi Sandboy,
You could set your organizational and academic structure up as follows:
- 3 organizational units (1 top organizational unit 'university', 2 lower level organizational units 'campuses').
- Create two different F objects (locations) to relate (a003) the campuses to locations
- 2 academic calenders (please also consider one academic calender if ONLY the registration periods are different. You should ten relate the one calender to the highest org unit. Please also note the fee calculation reads only the highest calender 0100 TL!)
- Programs as offered by the campusses under the related organizational units as wel as the module groups and modules.
With this set-up you are good to go and run the processes as you described.
br
Rob

Problem with ADS and LDAP

Problem with ADS and LDAP
I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
After connection via LDAP I cann't get any object ( users or goups etc. ).
I try connect to ADS by java ( JNDI ).
When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
the same problem - no objects.
Can anybody help me?
Grzegorz Pszona
my e-mail: [email protected]

Thanks a lot.
Softerra's browser is really good.
Thanks
Rashmi
"Anant Kadiyala" <[email protected]> wrote:
>
I used Softerra's LDAP browser. The browser is free. There is also a
java baded
LDAP browser from Univ of Michigan. I found the Softerra browser to be
more easier
to use.
-anant
"rashmi" <[email protected]> wrote:
Hi,
Can you please let me know which exact ADS tool that you used to examine
the
DN. I have Active Directory Users and Computers, Sites and Servicesand
Domain
and Trusts installed on my machine but I am not able to figure out how
to get
the DN?
Thanks
Rashmi
for Stephen Davies <[email protected]> wrote:
Grzegorz,
I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
a
fair bit of messing around to get it going. MS does have a few oddities,
for example the Administrators DN might look something like this:
cn=Administrator,cn=Users,dc=eglobal,dc=net
One tool that I found invaluable came with the additional support tools
for Windows 2000. The 'Active Directory Administration Tool' made it
easy to list the directory contents and examine the DNs.
Regards,
Steve
Stephen Davies
Principal Consultant
eGlobal Services Pty. Ltd.
Sydney, Australia
Ph. +61 2 9283 1033
http://www.eglobal.net/

I am having a problem with pop pups and small windows with ads constantly opening up on my safari?? Thought that macs didn't get virus? this looks like one- any experts around? please help me fix it with your instructions? really don't know what to do...

Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanks

Those are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

We have multiple users, each with multiple devices, on 1 apple id - as we want to share music and ibooks etc. We want the children to have access to the store, but with a financial limit. How do we do this?

We have multiple users, each with multiple devices, on 1 apple id - as we want to share music and ibooks etc. We want the children to have access to the store, but with a financial limit. How do we do this?

Welcome to the Apple Community.
That's simply not possible I'm afraid. You'd need to give them their own account and allowance or make it so you are required to be there to input the password when they wish to make a purchase.

I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

- Try contacting iTunes for the password problem:
Apple - Support - iTunes - Contact Us
- For the other problem you can try a reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The next standard thing to do is to download/install a new app but you cant 'do that.
- Instead, try restoring from backup.

How to FaceTime and iMessage on multiple apple devices with one iTunes account

We recently received iPad 2's for Christmas and was looking for some advice on how to FaceTime and iMessage on multiple apple devices with One iTunes Account (Apple Id). I have created or attached other e-mail addresses to our apple id but do not know how to use them on the new devices. Our home MacBook Pro uses our main apple id for FaceTime. The iPads have been setup with the main apple id w/o being able to use FaceTime and iMessage.
Please Help...
I appreciate the help and support.

P and V-
If you are trying to connect to someone with a different Apple ID, I think all the devices should work, but one at a time.
The problem is when you try to connect between two with the same Apple ID. Once the calling device tries to make the connection, it finds the second device to be "busy". That is where each needs to use a different E-Mail address when setting it up.
On iOS devices, when you press the Home button to exit an App, the App may still be active in the background, even when the device is sleeping. If FaceTime or iMessage is merely being active that way, it may be enough to "tie up" the E-Mail address.
From the Home screen, double click your Home button. You will see a list of recent Apps along the bottom of the screen. Press and hold on one of them until they start to wiggle. You will then see a red minus sign on each. Pressing the minus sign will remove an App from the list, and stop it from working in the background. (Click the Home button to stop the wiggling, and again to hide the recent Apps.)
Fred

Multiple COREid environment with ADS

Similar Messages

Maybe you are looking for