Multiple corporate Directories on a single Callmanager cluster

Hi,
I just want to ask if it is possible to setup and use multiple corporate directories on an IP phone. We are using CUCM 8.6 and 6945 IP Phones. We would like to setup telephony services for different companies on a single cucm cluster and want the users with their IP Phones to only see and use their own Corporate Directoy.
If this is possible, can someone explain how?
I only know that there is the directory URL in Enterprise Services Setup in CUCM. But this points to have just one diretory, right?
Thanks
René

You need to build your own custom directories and host them on an external web server, then register them as ip phone services in CUCM, and subscribe the phones you want to use them.

Similar Messages

Multiple Corporate Directories based on DP CM 4.0

We have a sister company and I want to create seperate Corporate Directories based on device pool or css on Callmanager 4.0

Roy,
You cannot set the corporate directory at a Device Pool level, only Enterprise Parameters for affecting multiple phones. At the user level you can assign a directory url per phone. You can bulk these settings to a phone via the device pool search in BAT. The negative to this is that phones could be added later without the correct information. Also this setup requires two LDAP servers configured with your user information or a common one with some default search base configured differently in the ASP pages. You would need to copy and adjust the original corporate directory asp pages to accomodate the two different LDAP stores or LDAP configuration. The appropriate page would be referenced by the appropriate user group. Example User Group A phones would be configured with http://webserver/CCMCIP/xmldirectoryGroupA.asp and User Group B Phones would be configured with http://webserver/CCMCIP/xmldirectoryGroupB.asp. Your CCM would still be integrated to one LDAP store (DCD, AD, etc.) but your directory services would use a different LDAP.
If you do this then I would recommend you set your standard directories enterprise parameter to a web page that says the users directory is not configured. That way if a new phone is added without a directory the user would get a friendly page that tells them to call the help desk to get the correct corporate directory setup.
Here is the link describing just directory access via HTTP.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edaa5.html#wp1056718
Please rate any helpful posts
Thanks
Fred

Convergence - Multiple "Corporate Directories"

Sun Convergence 1.0-4.01
In the Address Book part of Convergence is it possible to add another "Corporate Directory"? By default the Corporate Directory points to the Directory Service that is hosting users and groups for the domain the user belongs to. Users can search that and add entries to their own "Contacts". I am needing the ability to add another Directory Service (different Directory Server altogether) where users could perform searches and add those to their own "Contacts" list. The user would need to ability to search both directories.
Is this possible? If so, how?
BTW, I don't want to use DPS to accomplish this. I had thought about using a chain but that feature is deprecated in DS 6.x.

sheger77 wrote:
In the Address Book part of Convergence is it possible to add another "Corporate Directory"? No, not at this time. I'm pinging the internal mailing lists to see if there is any kind of ETA on this.
http://wikis.sun.com/display/CommSuite6/Communications+Suite+6+Component+Products+Release+Notes
"A Note About Corporate Address Books"
By default the Corporate Directory points to the Directory Service that is hosting users and groups for the domain the user belongs to. Users can search that and add entries to their own "Contacts". I am needing the ability to add another Directory Service (different Directory Server altogether) where users could perform searches and add those to their own "Contacts" list. The user would need to ability to search both directories.
Is this possible? If so, how?Without using DPS, I cannot think of a way off the top of my head.
Regards,
Shane.

Multiple databases in one single RAC cluster

Hi, I would like to know if one can have multiple databases running on a single RAC cluster, we have several databases in our shop and would like to consolidate all of them into a single 3-4 node RAC cluster running databases with 10.2 and 11.1 versions.
I am newbie to RAC and would like to get some clarification if anyone has done this, google search comes up with few hits on this topic, so obviously this is not doable.
In our case we have one database supporting critical applications and few other not so critical but are used very extensively between 9-5, so what is the use of RAC if I cannot consolidate all my databases into one cluster, or if I need a separate cluster for each of these critical databases?
I have been all the Oracle docs that keep repeating one database multiple instances and one instance-one machine-one node, they don't even advise running multiple instances on a single node?.
I appreciate any insight.
Thanks.

ora-sql-dba wrote:
Can you give more details on how you would setup multiple databases running different versions on a single RAC cluster, I am yet to find any documentation that supports or even elaborates on this topic.You can configure a cluster with 12 nodes. Then, using dbca, configure a dev instance for nodes 1 and 2, a prod1 instance for nodes 3 to 6 and a prod2 instance for nodes 7 to 12.
You also can configure each of these instances for all 12 nodes. And use it on all 12 nodes.
Or, after configuring it for all 12 nodes, you can start the dev instance on nodes 1 and 2, prod1 on 3 - 6 and prod2 on the remaining nodes. If dev needs more power, you can for example shutdown prod2 on node 12 and start another dev instance there.
My issue is with the 2nd option - running more than one instance on the same node or server. Why? Each instance has a basic resource footprint ito shared memory needed, system processes required (like db writer, log writer, sys monitor) etc. It does not make sense to pay for that same footprint more than once on a server. Each time you do, you need to reduce the amount of resources that can be used by each instance.
So instead of using (for example) 60% of that server's memory as the SGA for a single instance, if you use 2 instances on that server you now have to reduce the SGA of each to 30% of system memory. Effectively crippling those instances by 50% - they will now have smaller buffer caches, require more physical I/O and be more limited in what they can do.
So unless you have very sound technical reasons for running more than one instance on a server (RAC or non-RAC), do not.

Managing multiple Postfix instances on a single host

We have quite a few sites on our Xserve. Each site should be able to relay email out the respective unique IP on a single host; however, by default email goes out the default website of the server or which IP is the current gateway.
NOTE: this is not a Postfix Virtual Domain Hosting > mail forwarding domains issue. Mail routes just fine to the correct email boxes. This is and issue where email going out to other mail servers originates from the box and not the respective domains and IP space.
The solution for this is Multiple PostFix Instances. One for each website (each website has a respective IP due to SSL and DNS is correct along with MX records).
For the outbound mail relay for our corporate network it seems there are no fields to enable a new postfix instance for each hosted or virtually hosted domain. Nor is there a way to enable SMTP to relay outgoing mail through another host unless you use a generic setting for every website on the server.
So for a enterprise level business how do we Managing multiple Postfix instances on a single host?

Fully on the same page with you. 110%
Here is why I am under the impression of why each domain name needs to be as if it needs its own MTA (mail transfer agent). No matter how big or small the business.
Just like a domain using SSL in Apache needs a dedicated IP when doing the packets . . .
Yahoo the big dog (for small to medium online businesses 70% of their customers make purchases with Yahoo emails; which most of them are temp emails or known as aliases.) states:
From: help.yahoo.com/l/us/yahoo/mail/postmaster/basics/postmaster-02.html
Many mail providers follow the same guidelines:
{quote}Segregate your lists to different IP addresses. If you maintain several lists (or clients, especially for an ASP), you may want to segregate your lists to ensure that users are marking each list on its own merits. If user sees both spam and legitimate mail from the same IP, their notifications to us will be hazy and will likely result in the spam overiding the legitimate mail.{quote}
So why not segregate websites to email out their own dedicated IPs?
Understandably sites that share IP space can go out the default MTA or better yet the MTA of that IP.
This way host providers can segment groups of clients and further prevent issues with out going email.
When email goes out a single MTA there are checks and rate limitations not just on the hops involved but from the "originating" IP address. So if site "A" has one IP and site "B" has another . . . well they both send email out the same default gateway. Take 100's of domains going out the same IP and customers (websites) start having issues getting customer communications delivered.
{quote}Maintain accurate reverse-DNS information for your mail servers. Yahoo! Mail makes extensive DNS checks for each connection, and an accurate reverse DNS will ensure prompt processing of your connection and email.{quote}
One mistake by one client out of 1,000 sites (or now Apple letting tens of thousands of sites able to be hosted) can get all 1,000 websites deferred and have what is called "reputation" issues.
In the past, as companies grow, sure they get more boxes or can cluster mail servers. With economic times beyond using Parallels . . . a single Mac Xserve can handle tens of thousands of websites doing a few thousand emails a day or more. It is more of a software/setting/configuration issue than just capability.
I remember Intel board meetings in the 90's where I (as a customer) stated put two nic cards on the mother board, standardize those rails, put twisted pair on those hard drive cables. Some things just take practical experience to see yes there is a real need and the business people are not getting it because they are focussing on the business or chasing their tail.
Also Note the IP address has to be STATIC:
From: help.yahoo.com/l/us/yahoo/mail/postmaster/errors/550-bl21.html;ylt=AsNxnjlX971dwy743e7j.olJHdG
{quote}In our continuing efforts to protect our users from unsolicited email, Yahoo! Mail does not accept SMTP connections from dynamic or residential IP addresses . . .{quote}
From: help.yahoo.com/l/us/yahoo/mail/postmaster/basics/postmaster-15.html
{quote}Segregate your mail streams by IP addresses, domains and/or DKIM selectors since Yahoo! Mail keeps reputation data about each IP address and domain you send from. For example, by segmenting the mail stream that delivers marketing mail from another that sends transactional messages, you make it easier for Yahoo! Mail to determine and assign each mail stream's reputation. {quote}
{quote} Use common-sense settings. While we have not published guidelines for numbers of connections you can concurrently use, we ask that you treat our resources with respect. The more you take, the fewer there are for others, which may force us to defer your connections. {quote}
From: help.yahoo.com/l/us/yahoo/mail/postmaster//basics/postmaster-38.html
{quote}To facilitate the smooth flow of messages between legitimate senders and Yahoo! Mail, we offer the following recommendations:
Limit the messages you send per connection
Yahoo! Mail accepts a maximum of 5 messages per SMTP connection. We encourage you to cap the number of messages you send to Yahoo! Mail to fall within this per-connection limit.
When this limit is reached, no further messages will be accepted for delivery as our server automatically terminates the connection (without giving an error code). If you are sending messages to a significant number of Yahoo! Mail users, the suggestions below will help ensure uninterrupted delivery for your messages.
Reestablish connections if you do not get an error code
When our server terminates your connection after 5 messages have been accepted, you may try to reconnect to our MX servers immediately thereafter.
Open concurrent connections
You may open concurrent connections from the same server to facilitate efficient transmission of your messages. However, while we do not publish specific guidelines for the numbers of connections you can concurrently use, we ask that you treat our resources with respect. The more you take, the fewer there are for others, which may force us to deprioritize connections from your server(s).{quote}
In the Server Admin under General one can enable IMAP with a maximum number of connections. However, for normal SMTP there is no connections cap. Unless I am wrong here.
Domain throttling by domain is another way, but the real solution is just dedicated IPs for each website or each website to have a separate MTA. In the past this has meant a dedicated server or a physical gateway.
Technically there should be a Virtual solution. If I can virtually host many sites and many incoming emails on dedicated IP space respective to each domain. There should be virtual MTAs on dedicated or the same respective IP space as the incoming; hence, why I gave the example of how SSL works in Apache with web servers.
Totally get what you are saying on how currently mail works just out the default gateway since there is only one "default" MTA for the "xserve".
Everything is good coming in, but did something somewhere miss the mark on the outgoing? Should be one for one.
Yahoo is the big player putting the foot down or the glass half full people would say setting the mark on how outgoing mail should work when they are accepting emails.
I am not trying to innovate, but rather just follow the rules.
Sure mail out one MTA works no matter how many website you put on the box and it is "good enough for government work" or "looks good from my house".
There are many people struggling with corporate communications (even the concept of corporate communications and marketing) and I think Apple could step up to the plate and help follow the standard of best practices.
I have done research for 10 years and over the past two tested what I know to be true. Then spoke with many businesses that did not understand but had the same issue. . .
Yahoo customers not getting their email communications and email simply not being as good as the old fashion phone call.
So back to your question (fabulous question since every tech asks me the same thing):
{quote}So my question to you is this: why can't you run all your domains on a single server/IP address?{quote}
Because it is no longer 1996 and I want Apple stock to triple!
. . . and that it no longer works for sites conducting a profitable business. We are really underachieving what America could do!
Yahoo! is clearly saying to each business to do business communications or even marketing on separate IPs. Gmail, Hotmail, and the list goes on and on. They all follow the same thing. Yahoo! just happens to be more aggressive and has more good consumers (buyers) using their free email service. Gmail started aliases and could gain market share of buyers.
I need to get Xserve to have one dedicated IP in and out for each independent website whether it is an Apache transaction on port 80 (443 SSL) or an email going out the postfix MTA on port 25 SMTP or any other standard alternative port (587 or 465 SSL) for that matter.
So far everything works as expected, but the SMTP MTA out. One big default gateway per hardware.
We missed the 1% mark. That club that gets it! I would like to see every business owner that buys an Xserve to be in that one percent club out of the box!
Why Rob? Well because it works! Dedicated IPs work. Think about this, if you gave the postman your address and did not include your suite number more than likely your lucky if you get your mail. WORKS the same way for email.
If your business grows you can get a few more until something once again gets abused and they start tracking MAC addresses. By then will have virtual MAC addresses like most routers can already do.
To prevent SPAM you just set the MTA defaults to one IP per website. Let's keep it simple. This way you keep a clean reputation and one reputation per website or business. Most businesses just need one IP and cannot afford a whole server for each website/business. THINK GREEN!!! The email filtering systems (RBLs and filtering rules) already out there will weed abusers out. Let's not hurt the small to medium businesses in the process.
Your not going to get RDNS and dedicated IP space anyhow unless your a real business.

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

How do i combine multiple pdf file into a single pdf file?

how do i combine multiple pdf files into a single pdf file?

The thread was started in early March and it's Mid-April, I know this very well. The OP of this thread posted a very common and simple question or maybe he/she would have resolved this. For an Adobe Acrobat user it's not at all difficult to combine multiple PDF files into one. But to combine PDF files full version of Adobe Acrobat is mainly required, otherwise PDF files can't be combined. For example, I'm using Adobe Acrobat 9 Pro. These simple steps are mainly required to combine PDF files:
Open Adobe Acrobat.
Click on Combine and click on Merge files into a single PDF.
A window will be appearing, click on Add Files and select the PDF files you want to combine.
Arrange the selected files in any order with the help of Move Up and Move Down button.
Now click on Combine File and the selected PDF files will be combined within a few seconds.
A new PDF file will be created. Click on Save As and name this new PDF file. Then, click on Save.
A new PDF file will be created and all the selected PDF files are combined in it. The steps shown above might be different in other versions of Adobe Acrobat. Other than this, some third-party PDF merge software are also available. Most of them are available with a demo version for free evaluation. I've heard much about SysInfoTools PDF Merge software on other forums and directories and it's demo version is freely available. One may check its demo version if Adobe Acrobat (full version) is not available.
Regards

Multiple bone animations in a single export

I was wondering how to attach multiple bone animations to a
single model, or if it is even possible.
Do I just need to have duplicates of the model, each with its
own animation?
Is there any way to specify a range of keyframes within a
single animation timeline?
It would be nicer if each animation could have its own name.
Is there a way to import a motion independent of a model?
These are all just different ways of asking the same
question, I know
Thanks for your help!

This is a multi-part message in MIME format.
------=_NextPart_000_005C_01C730C2.7EEBF4D0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
hi,
follow this steps
Create your character
apply animations as needed using the power of Softimage XSI
and the =
animation mixer if you want.
put the animations in secuence
example:
frames 1-25 standing
frames 26-50 walking
frames 51-60 attacking
and so on...
after exporting in Director use the range of motion needed in
your =
events.
whichModel.bonesPlayer.play("name", looped, startTime,
endTime, =
playRate, timeOffset)
REMEMBER that startTime and end time are in miliseconds so in
XSI you =
need to change your units in preferences to miliseconds also.
or you can code it in director to have passed fps to
miliseconds
Hope it helps,
Rafa
www.sintesys.net/exporter
------=_NextPart_000_005C_01C730C2.7EEBF4D0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1106"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=3DArial
size=3D2>hi,</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>follow this
steps</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Create your
character</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>apply animations
as needed using the =
power of=20
Softimage XSI and the animation mixer if you
want.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>put the
animations in =
secuence</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2>example:</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>frames 1-25
standing</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>frames 26-50
walking</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>frames 51-60
attacking</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>and so
on...</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>after exporting
in Director use the =
range of motion=20
needed in your events.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2>whichModel.bonesPlayer.play("name", =
looped,=20
<STRONG>startTime</STRONG>,
<STRONG>endTime</STRONG>, playRate,=20
timeOffset)</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>REMEMBER that
startTime and end time =
are in=20
miliseconds so in XSI you need to change your units in
preferences to=20
miliseconds also.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>or you can code
it in director to =
have passed =20
fps to miliseconds</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Hope it
helps,</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2>Rafa</FONT></DIV>
<DIV><A href=3D"
http://www.sintesys.net/exporter"><FONT
face=3DArial=20
size=3D2>www.sintesys.net/exporter</FONT></A></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV></BODY></HTML>
------=_NextPart_000_005C_01C730C2.7EEBF4D0--

Multiple LDAP directories for authentication

Hi,
I just upgraded to GroupWise 2014 (from 2012). In GW2012 I used LDAP authentication against eDir. In GW2014, I associated the GW mailboxes to Active Directory. I tested a few accounts and I can login just fine. However I also have mailboxes that have to authenticate to eDir, because (for now) they don't have AD equivalent accounts.
To achieve this, I also added the eDirectory as a directory in the GW admin console. I then enabled LDAP authentication in the Post Office security settings, without adding the "Available LDAP Servers" to the "Selected LDAP Servers" box.
When I logon to a mailbox that is associated to eDir, it allows me to logon. I do have a mailbox that doesn't allow me to logon, although it is associated to eDir. When I re-associate (remove-add) it, it works for a while only to stop working again. It's not entirely stable.
In the POA log, I see the following message: Alert: Utilize LDAP server which is not in the pool configuration! So it would seem it doesn't particularly like my setup.
Questions:
* Is what I'm trying to achieve not supported or am I configuring it wrong?
* If I add the "Available LDAP Servers" to the "Selected LDAP Servers" box will it use it a failover pool and thus mess up my mixed-directory authentication?
* Is it possible to use GroupWise authentication for some mailboxes and AD authentication for others. If so, it would take away the need to use eDir.
Iwan

It's not an error, just informational. The LDAP AUTH code for the POA has changed somewhat in 2014. Before, it used to only use LDAP servers in a pool, but now, it will first try any LDAP servers/directories in it's "Preferred list", but if it can't not find the user using that list, it will then proceed to try all other LDAP servers that are configured.
--Morris
>>> iwan<[email protected]> 1/9/2015 5:16 AM >>>
Hi,
I am able to authenticate to AD en edir within the same PO. I would like
to phase out edir as maintaining two directories is not ideal. The only
reason I still use edir is for those few GW accounts that do not have AD
counterparts and for which I do not want to create AD accounts. So using
LDAP(AD) together with GW auth would be ideal for me. I'll look into
creating a second PO for this purpose.
I just wonder why the POA log keeps displaying the following message, if
having multiple directories in a single PO is supported: "Utilize LDAP
server which is not in the pool configuration!"
Iwan
iwan
iwan's Profile: https://forums.novell.com/member.php?userid=5639
View this thread: https://forums.novell.com/showthread.php?t=481102

Multiple SOA clusters within a Single Domain

Hi All,
We're looking at a scenario where there would be multiple SOA clusters within a single domain. Would that be possible to do? I mean I can create multiple SOA clusters but it seems that applications deployed to one of the 2 SOA clusters seem to go into an inconsistent state. Please advise. Thank you.

This is just because all SOA servers in a domain will refer to one(same) SOAINFRA schema for SOA deployments info and hence belong to same logical group (cluster) and that's the reason why you cann't even have two separate SOA managed servers without a cluster.
Regards,
Anuj

OIM provisioning to Multiple Domain Controllers of a single Domain

Hi experts !
Our client has offices in different parts of country and they are using MS AD. We have to integrated this AD with OIM. The issue we are facing is that there is a cluster of domain controllers (DC) at each location for example NewYork, Dallas and Ohio and OIM is being deployed in NY. All the DC at all location are part of a single domain "example.com" and they is no child domain.
Now if a User Administrator in Ohio logs in to this central OIM online and creates / modifies user profile of a user in AD, it means that the OIM will create / update the user profile in the DC placed in NY and through AD replication, it will be pushed to Ohio.
As the communication between few sites is not reliable, thus managers at these locations will have to bear the delays if the replication between DCs takes time even when they have modified the resource profile in OIM.
Is it a possibility that the user administrator at location A, when modifies the user resource profile, the modifications is carried out in the DC of location A? for example, if the administrator in Ohio logs in, whenever, he changes the profile, OIM modifies the profile in DC placed at Ohio?
I have gone through "Configuring the Connector for Multiple Installations of the Target System" in MS AD connector Documentation but i am uncertain whether this "target system" means DC of same domain or different child domains?
Any help / idea would be really appreciated.
Best Regards.
Edited by: Zia on May 8, 2011 11:21 PM
Edited by: Zia on May 8, 2011 11:22 PM

thank you for your reply sir
initially i was of the idea to place OIM servers at each location with DB at a central point. However, there are more than a dozen such locations! have you come accross any such scenario where more than 12 machines running OIM at different places point to a central DB? i was a bit reluctant in proposing such design due to network instability. So we decided to deploy OIM at a single location in cluster mode and admins at each location will access this single instance (cluster) over the WAN. This cluster will populate domain controller at this specific location and will be replicated through AD replication.
But now the analysis team has pointed out the problem scenario as i have mentioned in my earlier post. so we are in a bit fix how to handle this situation :-s

Integrating multiple UCCX clusters with same Call Manager Cluster

I want to know if I can integrate multiple UCCX clusters with 1 Call Manager cluster? If yes, can someone please point me to the documentation.
I appreciate all the help..
Thanks!!!

Hi
Yes, you can. I'm not aware of specific documentation for this, but a couple of notes:
- Make sure you use unique resource accounts (e.g. JT user in particular as that is automatically managed by UCCX and one cluster WILL break the other)
- I would also use unique AXL accounts and probably RM accounts. RM you could share between clusters to just have one RM account to associate any agent phone to, but it's safer to have single-purpose service accounts.
- You can't assign a user to a particular cluster - so you enable IPCC Extension on one user, they appear in 'resources' on both UCCX servers.
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Create multiple SOA Clusters in a single domain?

Is it allowed to create multiple SOA Clusters in a single domain with both SOA Clusters sharing the same soa-infra schema but deploying different composites?
Create a domain with
- Admin server (AdminServer)
- SOA_Cluster1
-soa_server1
-soa_server2
- SOA_Cluster2
-soa_server3
-soa_server4
SOA_Cluster1 will need to deploy servcies A, B and C and SOA_Cluster2 will have services A, D and E. Is there any documentation which can help us with this?

Thanks for the document link but it seems that the document was created only yesterday. Can you elaborate on "only one set of SOA schemas is allowed per SOA domain/cluster". I was able to build another SOA cluster_2 to my existing domain with SOA_cluster1 pretty successfully. The only problem was the internal JMS queues were configured as Uniform Distributed. hence i was not able to point them to 2 clusters.

Multiple Java version on one Single Server

Hello All,
Linux RedHat 2.4.21-32.ELsmp
jdk1.3.0
j2sdk1.4.1_03
We currently have an application that only runs with java 1.3.0, but also we have other application that need to be on java 1.4.+.
What would be the right approuch in order to have multiple Java versions on a single server.
TIA,
Bruno

I am pretty sure you can do that.
I have done this with AccessGates and a Webgate is just an AccessGate with extra features. I am pretty sure we have done this on Apache with a webgate in different directories. Makes logical sense that it would work.
Thanks,
Scott

How to create the multiple spool requests for a single report.

Hi gurus,
I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
And one more question is can we create a spool request for a report which is running in online.
waiting for inputs frm gurus.

Hello,
As per my knowledge for creating new spool id you will have to set
output_options-tdnewid = 'X'.
and then using
job_output_info-spoolids
create a pdf using
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Rachana.

Multiple corporate Directories on a single Callmanager cluster

Similar Messages

Maybe you are looking for