Create multiple SOA Clusters in a single domain?

Is it allowed to create multiple SOA Clusters in a single domain with both SOA Clusters sharing the same soa-infra schema but deploying different composites?
Create a domain with
- Admin server (AdminServer)
- SOA_Cluster1
-soa_server1
-soa_server2
- SOA_Cluster2
-soa_server3
-soa_server4
SOA_Cluster1 will need to deploy servcies A, B and C and SOA_Cluster2 will have services A, D and E. Is there any documentation which can help us with this?

Thanks for the document link but it seems that the document was created only yesterday. Can you elaborate on "only one set of SOA schemas is allowed per SOA domain/cluster". I was able to build another SOA cluster_2 to my existing domain with SOA_cluster1 pretty successfully. The only problem was the internal JMS queues were configured as Uniform Distributed. hence i was not able to point them to 2 clusters.

Similar Messages

Multiple SOA clusters within a Single Domain

Hi All,
We're looking at a scenario where there would be multiple SOA clusters within a single domain. Would that be possible to do? I mean I can create multiple SOA clusters but it seems that applications deployed to one of the 2 SOA clusters seem to go into an inconsistent state. Please advise. Thank you.

This is just because all SOA servers in a domain will refer to one(same) SOAINFRA schema for SOA deployments info and hence belong to same logical group (cluster) and that's the reason why you cann't even have two separate SOA managed servers without a cluster.
Regards,
Anuj

Creating New (multiple) server instance for a single domain

Hi,
I am trying to create a new server instance under a domain and deploy a web application under that.
Ex:
I have domain: ABC
default admin server: Admin_server
New server Instance: server2
New server instance: server3
I deployed a webapplication on "Admin_server" and when i try to access the webapplication it works fine.
But when i try to deploy the same webapplication(or a new webapplication) i do get a nullpointerexception error.
I am new to weblogic and hence a bit lost here.
Also when the admin server "Admin_server" is created for domain "ABC" a new folder called "Admin_server" would be created under "ABC" [EX: C:\bea\user_domains\ABC\Admin_server]
the "Admin_server" would have a upload dir under which the webapplication files/folder would be deployed.
I was under the impression when u create a new server instance "Server1" a simliar dir structure would be created but this is not the case.
I am new to weblogic and this seems to a minor config which i am missing.
Any suggestions , hints would be appreciated

The node manger is installed as a service. I am using Nodemanager to start the managed server.
Actually now i have created a new domain DCM and the admin server is DCM_ADMIN. i deplyed a web app called DCM on this and do get the error. This is what exactly i got when deployed on a managed server [tested this on a different domain - but then it did work on the admin server]
ERROR:
Error 500--Internal Server Error
java.lang.NullPointerException
     at com.documentum.web.formext.config.ConfigService.(ConfigService.java:565)
     at com.documentum.web.formext.config.ConfigService.getInstance(ConfigService.java:68)
     at com.documentum.web.formext.config.ConfigService.getConfigLookup(ConfigService.java:83)
     at com.documentum.web.formext.config.ClientEnvQualifier.bindHttpRequest(ClientEnvQualifier.java:142)
     at com.documentum.web.env.WDKController.setBindings(WDKController.java:372)
     at com.documentum.web.env.WDKController.doStartRequest(WDKController.java:150)
     at com.documentum.web.env.WDKController.processRequest(WDKController.java:88)
     at com.documentum.web.env.WDKController.doFilter(WDKController.java:79)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6987)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3892)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2766)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
MY config.xml
<?xml version="1.0" encoding="UTF-8" ?>
- <Domain ConfigurationVersion="8.1.5.0" Name="DCM">
- <Server ListenAddress="" ListenPort="1120" Name="DCM_ADMIN" NativeIOEnabled="true" ReliableDeliveryPolicy="RMDefaultPolicy" ServerVersion="8.1.5.0">
<SSL Enabled="false" HostnameVerificationIgnored="false" IdentityAndTrustLocations="KeyStores" Name="DCM_ADMIN" />
</Server>
<JMSFileStore Directory="rmfilestore" Name="FileStore" />
<WSReliableDeliveryPolicy DefaultRetryCount="10" DefaultTimeToLive="60000" Name="RMDefaultPolicy" Store="FileStore" />
<Security Name="DCM" PasswordPolicy="wl_default_password_policy" Realm="wl_default_realm" RealmSetup="true" />
<EmbeddedLDAP CredentialEncrypted="{3DES}f42Gd5I8pTqrAXW1bntpvYdF9kQxUOm0+Sf9Liq9Wrg=" Name="DCM" />
<SecurityConfiguration CredentialEncrypted="{3DES}yA8jh/8xZqf+6HyuA5YesVFLKkpMBpCfOgJ7Gf0G+qOce7Pr8dtby+FnJY3lYu/7p5vqYw7Yw36vk98Vqb6P3ZE/bnahPhwu" Name="DCM" RealmBootStrapVersion="1" />
<Realm FileRealm="wl_default_file_realm" Name="wl_default_realm" />
<FileRealm Name="wl_default_file_realm" />
<PasswordPolicy Name="wl_default_password_policy" />
- <JMSServer Name="WSStoreForwardInternalJMSServerDCM_ADMIN" Store="FileStore" Targets="DCM_ADMIN">
<JMSQueue CreationTime="1141142209450" JNDIName="jms.internal.queue.WSStoreForwardQueue" JNDINameReplicated="false" Name="WSInternaljms.internal.queue.WSStoreForwardQueueDCM_ADMIN" />
<JMSQueue CreationTime="1141142209653" JNDIName="jms.internal.queue.WSDupsEliminationHistoryQueue" JNDINameReplicated="false" Name="WSInternaljms.internal.queue.WSDupsEliminationHistoryQueueDCM_ADMIN" />
</JMSServer>
- <Server ListenPort="9201" Name="DCM_TEST" ServerVersion="8.1.5.0">
<ServerDebug Name="DCM_TEST" />
<SSL IdentityAndTrustLocations="KeyStores" Name="DCM_TEST" />
<KernelDebug Name="DCM_TEST" />
<Log Name="DCM_TEST" />
<ServerStart Name="DCM_TEST" OutputFile="C:\dev\bea\weblogic81\DOMAINS\DCM\.\NodeManagerClientLogs\DCM_DCM_TEST\startServer_02_28_2006-10_58_26-1.log" PasswordEncrypted="{3DES}zluy0BrZ/DYTcUwAKEgovg==" Username="elisadmin" />
<WebServer Name="DCM_TEST" />
<COM Name="DCM_TEST" />
<IIOP Name="DCM_TEST" />
<JTAMigratableTarget Name="DCM_TEST" UserPreferredServer="DCM_TEST" />
<JTARecoveryService Name="DCM_TEST" />
</Server>
- <Application Name="da" Path="C:\dev\bea\weblogic81\DOMAINS\DCM\DCM_ADMIN\upload" StagingMode="nostage" TwoPhase="true">
<WebAppComponent Name="da" Targets="DCM_ADMIN" URI="da.war" />
</Application>
</Domain>

Multiple EAR files in one single domain ?

can i deploy multiple EAR files in single domain
thanks,
KM

I'm not sure what a "domain" is in this context. I suppose it depends on the J2EE server you're using. Weblogic has something called a "domain", and sure in that server you can deploy multiple EARs in one domain, and there can be multiple domains.

How to create multiple WIP jobs from a single Sales Order Line

Hi all,
I want to know if there's a standard way to create multiple single unit wip jobs from a sales order line which has 2 or more units, i mean...
I have a sales order line with item A with 3 units. If I progress the sales order, a single job is automatically created in WIP with 3 units to be created. What i want is to create 3 jobs with one unit each, all of them linked to the sales line order...
Thanks in advance!
Regards!

Assuming simplest of scenarios....
In case of changes to Sales order qty, an unplanned order will simply disappear.
If a wip job has already been created, you will get a cancel message (in case the job is not needed) or a reschedule out message (if the quantity needs to be reduced).
ASCP will give you a reschedule in /out message if the dates change.
Sandeep Gandhi

HANA XSODATA Create multiple entities with associations in single LUW

Hi all,
Is it possible to create multiple entities with associations in a single LUW.
For e.g. we have a Sales Order and Item. This is modelled as 2 DB tables and 2 entities.
In XSOData I have defined association relationship between them.My XSOData definition is like this...
"XSDemo.DB::SO"    as "SalesOrder"
   navigates ("SalesOrder_OrderItem" as "SOItem");
   "XSDemo.DB::ITEM" as "OrderItem";
   association "SalesOrder_OrderItem" principal "SalesOrder"("OrderID") multiplicity "1"
   dependent "OrderItem"("OrderID") multiplicity "*";
My post URI is
http://server:port/SODemo.xsodata/SalesOrder
My data is as follows
"ID": 1,
"Customer": 123,
"Desc": "Test SO",
"SOItem": [
      "Material": "MAT1",
      "Qty": "10",
      "Item": "10"
      "Material": "MAT2",
      "Qty": "20",
      "Item": "5"
From the post, I get a response 201 (Created). However, only the Sales Order is created. The Items are not created.
My question is:
1. Is it possible to create Order and Item together in a single post call ?? If yes, how. What is the syntax of XSOData / Post Request
2. If it is not possible to create Order and Item together in a single post call, then how do we ensure atomicity of the transaction.
For e.g. What is Order creation is success and then the Item creation fails ...
How can we ensure that all is committed or none is committed.
3. From the documentation I understand that this might be possible using modification exits... However, I want to achieve this without using modification exits...
Is this possible or not ?

Hi Thomas,
Actually the problem is that Sales Order and Order Items are modeled as different entities... So, XSOData allows creation of Sales Order Item independently WITHOUT creation of a sales order header.
For e.g. URL : http://server:port/SODemo.xsodata/OrderItem
Ideally, the XSOData should implement a logic that a Dependent entity cannot be created without a Principal entity.
For e.g. using a Sales order BAPI you cannot create a sales order item alone !
Similarily, since XSOData is the end point service for the consumer, the XSOData should have the logic to ensure that both principal and dependent entities are created together.
Otherwise, in the UI the developer has to ensure that the post body is build correctly...

Creating Multiple LibrarySession (Connection Pool), Using single LibraryService

Hello,
I am trying to create multiple LibrarySession with a single LibraryService, so that each user can pick a new session from a pool and release LibrarySession back to the pool, when the user task is been completed.
Question.
1. Is it possible to create LibrarySession Pool ?
2. If yes, Can any one suggest, whether there will be any improvement in the performance of the application by doing so, or Oracle IFS internally handles the connection pool mechanism for LibrarySession.
3. Does Oracle IFS handle LibrarySession pool internally.
If there is any code, which does similar action, please do forward.
Best Regards
Sujeem Haries

Sujeem, we do not pool LibrarySession instances for you. You may see a performance improvement if you maintain a LibrarySession pool, depending on the application. See the following post for more info:
Oracle Security & PAM
Please note that although LibrarySession instances are not pooled for you, the underlying database connections are pooled.

How can I create multiple front panels for a single block diagram?

Hello,
I have developed a VI with multiple controls and indicators that needs to run on computers with screen resolutions ranging from 800x600 to 1680x1050. The problem I'm having is that the front panel does not properly scale for this range of resolutions by checking the options in the "VI properties" option. Is there a way to create multiple front panels of various sizes for my block diagram and programmatically select the appropriate front panel based on the screen resolution?
Solved!
Go to Solution.

See the attached Zip file.
I have two different front panels. Open either one and run it. They both call MainCode.vi which takes the references passed to it and register for events. From there, it does all the work of the code you would have put in your front panel .vi.
This way each front panel can be laid out however you want for each screen resolution.
Attachments:
MainCode.zip ‏22 KB

How to setup multiple DNS zones in a single domain

We have a small charter school running a Mac Open Directory network on a single subnet with a single registered FQDN for its internal domain. We are about to open a second school within a wing of the same building which will also be on a Mac Open Directory domain, but since it is legally a separate school (just administered by the same staff) it needs to be on it's own subnet and have its own LDAP directory.
Is there a way to program DNS between the two schools so that DNS traffic can be routed between them without breaking the DNS and Open Directory/Kerberos realms of either? Both schools will share the same internal domain name. Is it as simple as creating two primary DNS zones on each other's nameservers, both using the same domain name but each having its own designated nameserver for that particular subnet?
For instance, the existing school is running DNS on server1.example.com within the 10.39.54.0/23 subnet. The second school will be running DNS on server2.example.com within the 10.39.56.0/23 subnet. Would I then simply create two primary zones within each subnet, one referring to its own with itself as the nameserver and one within the neighbor subnet referencing that subnet's server as the designated nameserver.
Or would I do this with each schools DNS servers searching through its own subnet as its primary zone with the neighbor zone being added as a secondary zone?
Thanks!

You have two options.
Use a DNS server with a single internal domain example.com and have (as you said) server1.example.com
If the two subnets are on separate networks either via a router or VLAN, then you could run a separate DHCP server on each and advertise the appropriate DNS server for that subnet.
Otherwise you could have a single DNS server and either single DHCP advertising that single DNS server and have both server1 and server2 in the single DNS zone, or a DHCP server in each subnet but still pointing to the same single DNS server.
Each of these two servers would be an Open Directory Master
Note: in DNS terminology a DNS 'zone' is the same thing as a Domain Name.
The second option which if you want to keep the two 'schools' completely separate is to do the following
Use a DNS server per subnet
Use a DHCP server per subnet
Use a different domain name per school e.g. school1.com and school2.com
Create a server record on each as appropriate e.g. server1.school1.com and server2.school2.com
You cannot have a single DNS server have two identical zones e.g. example.com and example.com as they are of course the same thing.
If the two schools will merge officially at some point it might be better to use the same domain name, if they are going to fully split then definiately it is going to be better to use two different domain names.

How to create multiple modules in quizzes in single file?

Hi,
Can someone guide me how to create a multiple module quizzes under one captivate file ( captivate 5.5 ver)
I have a quiz.cptx file with 50 questions from different chapters A,B,C,D,E with 10 questions in each chapter.
The scenario
Note : min 80% score per chapter is the passing criteria
1. Start the quiz after login and password
2. Start the quiz for chapter A ( 10 questions)
3. score for chapter A should be displayed
4. If "cpQuizInfoPointsscored"'s value < = 40 ; ie 80 % for chapter A
         review of the failed questions in the chapter
         OR
         retake quiz for that chapter should be triggered,
   else goto chapter B
5. Start the quiz for chapter B ( 10 questions)
3. score for chapter B should be displayed
5. If "cpQuizInfoPointsscored"'s value < = 40 ; ie 80 % for chapter B
         review of the failed questions in the chapter
         OR
         retake quiz for that chapter should be triggered,
   else goto chapter C
6. //rly with other chapters
7. After passing all chapters the result should be printer based on the scores.
Is there any better ideas to crack the steps 4 - 6, bcz i am not able to reset the value of "cpQuizInfoPointsscored"; which is incremented as each question is completed.

Welcome to the forum,
Agree totally with Rod, this can be done with advanced actions (have some examples on my blog), but it is a lot of work. And the Quizzing system variables such as cpQuizINfoPointsscored are all read only, no way to change them by advanced actions at all.
If you want to transfer variable values from one file to another, like from the different quiz files to a main file (to take decisions over there about possible branchings), you should have a look at Michael Lund's Save & Load Data widget:
Save & Load Data widget
Lilybiri

ITunes is creating multiple files/albums from a single album

Hi,
I hope I can explain this clearly. For some unknown reason on SOME CD's I put in and on SOME music I've added to my library (from my HD) I've gotten multiple album covers for one album. Let me try that a different way, each song on a CD will be displayed in cover flow as it's own separate CD's so that if there are 10 songs on Bjork's album, I'll have 10 different albums coming up in cover flow for Bjork. It's frustrating when I'm trying to scroll and more so on my iPod.
Any suggestions? Can I fix it?
Thanks.

*HowTo: Grouping Tracks Into Albums*
Excuse the long post, but hopefully covering all the bases (that I can think of) will help you fix the other issues you are likely to run into as you try to organise your iTunes library.
*Use an album friendly view*
iTunes will let you sort music on many columns, some of which are unlikely to group albums together. The most useful order for editing the library is probably *Album by Artist*. If you're not already there, select the list view and click on the column heading for Artist until it reads Album by Artist.
*One cover, too many tracks*
The iPod (and iTunes to a lesser extent) conflates two or more albums with the same title, most obviously with *Greatest Hits*. On the iPod this can result in one album acting as a combination of two or more. Selecting any cover gives all the tracks of all albums with the same title. The workaround for this "Greatest Hits" bug is to give each album a unique title - I tend to go for *Album - Album Artist* as this reads clearly in the iTunes browser. Alternatively you could use the wording as it appears on the cover or append different numbers of spaces for each different album. Somewhat oddly, setting different values for Sort Album doesn't work.
*Album not with others by same artist*
iTunes relies on the Gracenote CDDB database when identifying CD's. This often marks collections or anthologies of an artist's work as a compilation. In iTunes, however, the compilation flag has the logical function of grouping together tracks with the same album name, but different artists on each track, e.g. "Now That's What I Call Metal 666!". These compilations are then all grouped together at the end of cover flow. Most of us however, would expect "Greatest Hits" albums to be listed with the other albums by the same album artist. For albums which are essentially by a single album artist or group it is best to set the appropriate value for the album artist and clear the compilation flag.
*One album, too many covers*
Sadly the iPod ignores the Album Artist field when grouping albums which causes problems when some tracks list guest artists. You can simply mark the entire album as a compilation which seems to be the way iTMS handles it, however that's not an ideal fix. Short of waiting for Apple to address this issue (and as far as I can tell it goes back to the 1st gen. of iPods) we need a workaround. What I do is to put any additional artist info. in square brackets after the song name. E.g. *Track \[Feat. Guest\]* and then set *Artist=Album Artist* for each track. For anthologies where the Album Artist is credited as part of another group, e.g. for Cream tracks on an Eric Clapton anthology, I use *Track \[As Group\]*. For a track where the main Album Artist doesn't receive a credit, e.g. the first track of the Slim Shady LP credited to Jeff Bass, I just set the track name to *Track \[Guest\]* while still setting the artist to the album artist. N.b. I use square brackets to indicate this is not part of the actual song title and also use this style for Mix/Live/Bonus info.
*One album, still too many covers*
iTunes may split albums into two or more sections if some tracks from the album have different values for Artist, Album Artist, Album, No. of Discs or Part of a Compilation. Tiny differences such as trailing spaces, accented characters or variants of symbols can sometimes be quite hard to spot. The iPod is also more sensitive to case variations and may split or reorder an album that looks okay in iTunes. Normally overtyping the desired value for each shared field will complete the grouping of the album into one entity. Occasionally, however, this method seems to fail. When this happens I've found that you can force every field to update properly by adding some extra text - e.g. a trailing X, which once applied seems to complete the joining of the tracks into one album. Once this has happened the extra data can be removed and the album should remain properly grouped.
*Tried that, there are STILL too many covers!*
The Sort Artist, Sort Album & Sort Album Artist fields can be used to override the normal sort order. For example iTunes automatically drops leading prepositions (a/an/the) so "The Beatles" are arranged under "B" instead of "T". Occasionally different tracks from the same album can have different values in these sort fields which can also break up the grouping. Making the sort columns visible in iTunes can help with spotting & correcting such problems.
*One cover for multi-disc album*
Multi-disc albums are often listed as *Album (CD1)* for CD 1, *Album (CD2)* for CD 2 etc. To display these properly using just one cover, each disc should have the correct *Disc X of Y* values set, and then the entire album should be given the single title Album. Being somewhat obsessive I also renumber the tracks sequentially, working backwards from the last track (so that no two tracks ever have the same number) until I reach disc 1. BTW You can still give the individual discs different artwork should it be relevant so that the correct artwork will be displayed as the album progresses.
*One artist, many names*
With some artists, particularly classical composers, you should be aware of alternative representations of their names. E.g. 2Pac vs. Tupac. The menus will work best if for each artist you standardise on just one form of their name. E.g. make a choice between Mozart, W.A. Mozart or Wolfgang Amadeus Mozart, and then apply it consistently. For classical music I tend also to use the Composer as the Artist & Album Artist and either discard the performer details or place these into the Comments field.
tt2

Creating multiple flat files from a single source using Open Hub

Hi All,
I am not sure if its a common scenario but we have a requirement where in we have to split the data in the target into 3 different flat files depending on certain conditions. For e.g.
If the value of an attribute in a record is A then I have to create a file, if it is B then another file and if it is C, then another file.
Is this possible to achieve through open hub? We have a requirement to load only delta records. Any inputs is appreciated and would be rewarded.
Thanks and Regards,
Sundar

Yes it is possible,
All you need to do is create 3 destinations each of type Flat file.
For your data target link to the and Open Destinations1, link by creating a transformation. and while create DTP use filter A.
Again for your data target link to the another Open Destination2, link by creating a transformation and while creating DTP use Filter B.
similarly for Open Destination3, use Filter C.
Regards,Vj

Why does Muse CC 2014.3 create multiple style sheets for a single page site?

Hello,
My Master page is empty and never opened. My single page has NO MENU option selected.
How can I avoid this or fix it?
thanks for any help or advice, droid

Muse puts all the CSS that's common across all the pages of your site in one .css file and all the CSS that's unique to a given page into a separate .css file for that page.
At this time Muse does not special case the single page site situation and there's no option to merge the two CSS files or inline the CSS into the .html file.
I am curious what your primary concern(s) is regarding having two .css files?

How to create the multiple spool requests for a single report.

Hi gurus,
I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
And one more question is can we create a spool request for a report which is running in online.
waiting for inputs frm gurus.

Hello,
As per my knowledge for creating new spool id you will have to set
output_options-tdnewid = 'X'.
and then using
job_output_info-spoolids
create a pdf using
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Rachana.

Create multiple sales orders from single service notification?

Is it possible to create multiple sales orders from a single notification (IW51)?
We currently create sales orders directly within transaction IW51 (Create Service Notification). We kick off the sales order creation by pressing the "SALES ORD." button in the notification screen. We're now interested in creating a 2nd Sales Order which would tie directly to the same Service Notification. This is so that we can have the second order assigned to a different account assignment WBS (there are two different parties doing work on the service notification).
I assume you would have to go to VA01 to create the Sales Order, but am not sure how to tie it directly to the service notification from here. I treied to do a create with reference, but there is no ability to create with reference to a service notification.
Do I have to create a second service notification for the 2nd Sales Order for this to work? I want to avoid doing this if at all possible.
I'm running SAP R/3 Enterprise
Thanks for your help!

Hi,
go to vtaa- copy controls for sales document to sales document.
select your combination of order and quotation go to item level. There select value 0(zero) in field positive/negative negative.
No need to change update document flow.
After setting zero in copy control that be told on above. create order with respective to the quotation.
After saving the order.
go to document flow to see the status in between quotation and order.
If you placed setting right, then u certainly observe for quotation status will be open. so you can create no. of sales order with respect to that quotation..
Have a good day..

Create multiple SOA Clusters in a single domain?

Similar Messages

Maybe you are looking for