Multiple Customers Number displayed due to compounded InfoObject

Hi Gurus,
I have one Compounded InfoObject "CUSTOMER" (compounded with InfoObject ROLE). There are also few display attributes(like CITY) in CUSTOMER InfoObject.
If there are 2 role assigned to 1 customer, it will display 2 records.
For Example-
Customer 12345 have two role ABC and DEF. It will display two records with customer number as ABC/12345 and DEF/12345.
My requirement is to display only 1 record for 1 customer(if multiple roles are assigned), irrespective of the role. I can't change the Compounded InfoObject CUSTOMER as it is used in several reports.
I also want some display attributs of CUSTOMER InfoObject in my report.
Please suggest any solution for this situation.
Thanks in advance.
Regards,
Alok

Hi Alok,
I think Rambabu's option is the best option. If you can't delete data of info privers which include characteristic' CUSTOMER' you can create a new customer defined characteristic.
Also you can delete master data of info object CUSTOMER with debug mode (you can get help from an abap consultant), but deleting master data with debug mode is very dangerous process and it can cause of SID consistencies.
Secondly you can't add display attributs of 'CUSTOMER' to Bex Query unless you add CUSTOMER to the query. Why don't you set them as nav. attr.?
However if you use WebI you can add display attr. to your report .
Thanks&Regards,
Oya.

Similar Messages

(Un-) Displaying Values of an COMPOUND InfoObjects in BEX

Hello,
I have a Mastadata InfoObject with one Attribute and
one Compound:
Masterdata - InfoObject:
IO_MASTER, with masterdata, CHAR(30)
Attribute:
IO_ATTRIBUTE, CHAR(29), ...
Compound:
IO_COMPOUND, CHAR(29), ...
...which means logical Primary Key is:
IO_MASTER, IO_COMPOUND
In BEX the Masterdata InfoObjects displays values with "/".
For Ex. as:
<IO_MASTER Value / IO_COMPOUND Values>
I want to Display only as:
<IO_MASTER Value>
How ?
Thank You
Martin Sautter

Hello,
for Your info:
Put the Compounded InfoObject IO_COMPOUND
into the rows or columns ( and mark it as undisplay)
Please compare:
Re: Exclude compound object data in report
Martin Sautter

Display compounded InfoObject value in BEX selection screen

Hi people,
Problem in 7.0
I have Costcenter compounded with Plant and I am using Costcenter for Selections in the BEx varaible screen.
After running the report, in the selection screen value help, only the value of Costcenter is displayed, not the compounded value (So it becomes very difficult to identify from which plant the costcenter is from)
What should I do so that the User sees as Plant/Costcenter in the Value help?
Problem in 3.5
The above issue is not there in 3.5, but.......
I select COSTCENTER X from PLANT A and execute the report. In the report output, I do not see the records only for COSTCENTER X from PLANT A, but for COSTCENTER X from all Plants
why is this? Is it how this works or is it a bug?
Please help. I appreciate your assistance very much.
Thanks,
Shameem

Hey there,
Please understand the behaviour of compounded keys from the below notes:
1111632   Problem with text display in BEx Query Designer
1080863   FAQ: Input helps in Netweaver BI
541253    Restricting characteristics with compound characteristics
575563    Selecting filter values for compound characteristics
Hope this can help,
Diego Seben

Payment from multiple customers in F-28

Hello Experts,
I have scenario where one customer is created as multiple customers in SAP.
DEF Limited has presence in three states. Hence three customers are created in SAP with customer number: 1000, 1002, 1005
I did billing of Rs.500 for each customers. Later I received Rs. 1500 (Rs. 500 from each customers of DEF i.e. Rs. 500 * 3). Since payment document should be one, in F-28, I clicked "process open items" thrice. This suffice my requirement.
But there is one problem here. I need to click "process open items" tab three times. This will be very problematic for selecting multiple customers when its 30 - 40 customers payment in one payment document.
So please tell me, if there is any solution where I can create one customer group (not account group) and select that group in F-28. Once i select that group, all open invoices related all customers in that group will appear in F-28.
This will help us performing transactions faster.
Please help me with some solution on this.
Deepak

Hello,
One option is to use worklist for customers (transaction code for customer is OB55).
Problem is that this transaction is part of customizing reason why I seldom used it in the past.
A possible solution would be to add it to the "current settings"
Regards
Th.

Can we use the same credit card for multiple customers???

One of my clients has a requirement where they need to use the same Credit Card number for multiple customers. I have looked into the possibility of using the 'Alternate Payer' functionality but besides that is there any other way SAP can be tweaked to accept the same credit card on multiple customer accounts?
Thanks in advance for any help or guidance you may provide.
SJ

I know SAP throws an error message which is why I was looking for a solution. I do have a work around. By pointing to an 'Alternate Payer' on the Payment Transactions tab on the customer master you can have a credit card on this alternate payer master record and use this payer on several other customers. All these customers will not have any credit card stored on their master records.
Thanks for your response though.

Inbound EDI multiple customers using 1 partner profile

I would think that it's possible to set up a single partner profile in WE20 through which you can process multiple idocs against multiple customers for order processing. Can anyone guide me on how to achieve this.
Thanks, Mart

Absolutely. You could have an EDI Partner called 'GENERIC' for example, and could use that to process inbound EDI Sales Orders. Obviously you would need an identifier to represent the correct Customer account, ideally this would be the Sold-to number. If it's not your Internal Sold-to, but another unique number, then you should be able to add mapping via transaction VOE4 to table EDPAR. I.e the Customers sends an external number 123 representing their Store Id, you map that back to your internal Customer Number. Only trouble with this is if two different Customers had the same external Id, as you would have no control over that. For our generic EDI Partners, the Customer Number is mandatory.
Cheers, Paul.

EDI 820 paying multiple customers

When I have an inbound 820 partnered with one customer but the payments in the 820 apply to multiple customers. I have entered the alternate payee as the partnered customer on the customer master of each related customer. The 820 enters the partner customer number in the atl. payee field in the payment advice and not the customer number associated with the invoice number? Is there a configuration guide of OSS note that shows the proper setting for this?

When I have an inbound 820 partnered with one customer but the payments in the 820 apply to multiple customers. I have entered the alternate payee as the partnered customer on the customer master of each related customer. The 820 enters the partner customer number in the atl. payee field in the payment advice and not the customer number associated with the invoice number? Is there a configuration guide of OSS note that shows the proper setting for this?

Handle SF for multiple customers in select options

Hi All,
I have a Customer Statement where I need to Print for multiple customer's invoice details.. The logic i have used here is i am passing the Customer data to the SmartForm(SF) and extracting the invoice details of that customer and then populating the SF for the layout.. the thing is i have to do the same thing here for multiple Customers.. i have to add the generated SF of other customers to the same spool.. please help me out with thsi scenario.
Thanks in Advance
Kan

Hi ,
create a internal table containg list of custome and all its details in the driver
program . Pass the internal table to the smaft form . Then in the smartform create the loop for the internal table . At the ned of loop create the command statement to break the page after details related to customer 1 is displayed and for mext customer it will be displayed in next page .
Regards

Loading contact person to multiple customers

Hi all, is there any enhancement that would allow the loading of the contact person to multiple customers? any hint?
For example, I have two customers that have the same contact person (same contact person number), how could I build an enhancement to assign automatically the contact person to the two of them. Transaction XD99 is not allowing me to assign the same contact to different customers.
Many thanks!
Mario Sousa
Edited by: BPX PARTNERS on Nov 22, 2010 9:16 AM
Edited by: BPX PARTNERS on Nov 22, 2010 11:34 AM

Hi sanjay,
Yes there is transaction BP available in ECC, but the business partner is for cross application components.
I tried it but I don't find any of the customers using BP. I think we need some settings to link cusotmers and BP with in ECC.
I dont think this is mandatory for the SAP E-commerce scenario.
I know we do the sync of BP in CRM to the customers in R/3 when we have the SAP CRM E-commerce scenario.
Please let me know if we can sync the BP and Cusotmers data with in ECC.
Thank You

QA11 -Txt for multiple lot number

Hi,
In qa11 for particular inspection lot in usage decision if we give reason of rejection and enter on text field
user sholud get pop message for entering reason of rejection .
If he does not enter he sholud not able to save
For this i had used EXIT_SAPMQEVA_007 to display message .
If now i select multiple Lot number through my z program i should be able to give reason of rejection same for all lot numbers selected .
ANY exit for it .
Regards
Ivneet

You can hit "Options", and then choose "Mark > Mark all" to select everything. After that you can do "Options > Remove" or hit the 'C' key to delete everything. Same mechanism orks in Messaging, works in Contacts, etc.
The phone does not have built-in protection just to prevent access to messages.
There might be suitable applications for such. Check the list/catalog here, for example:
http://my-symbian.com/s60v3/software/index.php
Also, for installing applications through a PC, get the latest Nokia PC Suite from here:
http://www.nokia.com/pcsuite

Iphone 5s incoming call number displays incorrectly.

Whenever I call my wife's Iphone from work, the number displays incorrectly on her caller ID. It is always dropping the third number of the area code, so if my work number was 123-456-7890, then when I call her it shows up on her phone as 124-567-890, it doesn't even show a ten digit number. So far I have noticed that it only happens when I call her from the landlines at my work. I also have the exact same iphone 5s on the same carrier and the numbers display perfectly fine on my phone so I feel like it's some setting in the phone. Before switching to an iphone we had her contacts imported from an old Verizon flip phone, not sure if that has anything to do with it. Has anyone seen or heard of a similar issue?
Thanks,
Dan

By the way I have completely reset all content and settings several times, tried turning off international assist, tried several suggestions I found online dealing with the sim pin, switched to a different phone to have the same thing happen on that phone also. I have the same exact iphone 5s and carrier and service plan and the numbers appear perfectly on my phone. I'm so confused why this is happening.

Dunning letter cannot be released to multiple customers

hi sap gurus,
i did the all settings for dunning still "Dunning letter cannot be released to multiple customers". can u pls help me.
Thanks in advance,
RAVI

Hi mauri,
Thanks for your reply
I dont have authorization to view this can u send me the notes pls.
Thanks in advance,
RAVI

Internal error, cannot load engine Number 2 due to error 5

I have had a StartStop transcription program for several years. I bought my Dell computer with Windows 8 (now 8.1) in late 2014. I had no problems running the StartStop program until it got a tune-up by my regular tech. Since then, when I click to
open it, I get the message: "##### Internal error, cannot load engine Number 2 due to error 5." My tech couldn't figure it out and another tech couldn't fix it either after looking at it for hours. StartStop could not figure it out either.
Since then, I bought a Digitope digitalizer, which converts cassette tapes to CD's. When I try to open that program the exact same error message comes up!
So I am thinking there is something awry with certain audio programs. I am able to run another transcription program, Express Scribe.
Any thoughts!
The 2nd tech suggested rebooting the entire computer and reinstalling all programs, but I'm not sure I can find all my original programs.
Thanks!

Hello Silent Fisher,
What StartStop transcription program do you mean?
Please share me a screenshot.
If it is a third-party software, it is recommended to contact the support of the software.
If the issue occurs after your change, please use the system restore to restore your computer’s system files to an earlier point in time.
http://windows.microsoft.com/en-HK/windows-8/restore-refresh-reset-pc
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!

I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!
I really need this issue resolved it is driving me insane!!! How can the images appear perfectly fine on my laptop then when transferring over to a USB stick they just corrupt!?

Check out this site:
http://osxdaily.com/2012/04/22/format-drive-mac-pc-compatible/
That will show you how to format a USB stick for use on both PC and Mac.
If the problem continues take it to an Apple store and have them check it out.
>Also what s exFAT?<
From:
http://en.wikipedia.org/wiki/ExFAT
"exFAT (Extended File Allocation Table) is a Microsoft file system optimized for flash drives.[3] It is proprietary and patented."
That first site explains it at length.

How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

See this page for helpful information.
http://samsoft.org.uk/iTunes/grouping.asp
B-rock

Multiple Customers Number displayed due to compounded InfoObject

Similar Messages

Maybe you are looking for