Multiple dbcontrol (EM) not sending alerts

I have two database instances on the same machine.
two listeners: port 1521 and port 1522..
two dbcontrol services (EM) port 5500 and port 5501..
one of them sends out the EM Alert emails, the other does not.
but I can send a test email from it so I know it is configured properly.
any ideas?

Merlin128 wrote:
I have two database instances on the same machine.
two listeners: port 1521 and port 1522..Aside from your actual question, why are you running two listeners? One listener, listening on a single port, will happily service multiple database instances. Very, very few installations can justify the additional configuration/maintenance/complexity of multiple listeners on a single machine.
two dbcontrol services (EM) port 5500 and port 5501..
one of them sends out the EM Alert emails, the other does not.
but I can send a test email from it so I know it is configured properly.
any ideas?

Similar Messages

Messages app is not sending alerts in ios 8 is also hanging and crashing very glitchy

Updated to ios 8 yesterday and noticed that messages were appearing in my messaging app, but no chime or alert badge was appearing. yes i did check do not disturb, it was off, the sound was on and alerts were also turned on.
i've also noticed the messages app is crashing about 50% of the time and is hanging every time i use it. i'm going to backup and restore now. wish me luck.
anyone else having problems?

This was the final step in a series of attempts and it finally worked for me... finally after an hour or two of reading every post I could find on getting repeat alert notifications. I closed the app (double clicking home and pressing the red circle with the white line in it which turned off the messages app). Then I held the home and off button until the apple came on... I had also reset the DNS service numbers to 8.8.8.8,8.8.4.4: I also made sure that the badge icon was on, a sound was selected and I had it turned to repeat alert 3 times. When I tested after doing all these things the repeat worked. I decided I wanted to turn it to repeat 10 times and it didn't work.... so I held the home and off button at the same time and it reset so that the alert repeats 10 times. Perhaps the combination of all these these things did the trick, or maybe it was just the home and off button reset...

Cisco Prime Infrastructure 2.1 not send email alert when link down

Hello everyone
I use PI to monitor 1 switch and 1 firewall . When a link up/down on switch , PI immediately sends an email alert .
But when a link up/down on FW , PI not send any email alert . PI knows link up/down on a FW is a critical alarm ( it's show up on "Alarm Browser") , but not send email.
I enable all SNMP trap on FW , i tested that event on SolarWinds and it immediately sends an email alert . So there is no problem about FW config

Causes of Errdisable
This feature was first implemented to handle special collision situations in which the switch detected excessive or late collisions on a port. Excessive collisions occur when a frame is dropped because the switch encounters 16 collisions in a row. Late collisions occur after every device on the wire should have recognized that the wire was in use. Possible causes of these types of errors include:
A cable that is out of specification (either too long, the wrong type, or defective)
A bad network interface card (NIC) card (with physical problems or driver problems)
A port duplex misconfiguration
A port duplex misconfiguration is a common cause of the errors because of failures to negotiate the speed and duplex properly between two directly connected devices (for example, a NIC that connects to a switch). Only half-duplex connections should ever have collisions in a LAN. Because of the carrier sense multiple access (CSMA) nature of Ethernet, collisions are normal for half duplex, as long as the collisions do not exceed a small percentage of traffic.
There are various reasons for the interface to go into errdisable. The reason can be:
Duplex mismatch
Port channel misconfiguration
BPDU guard violation
UniDirectional Link Detection (UDLD) condition
Late-collision detection
Link-flap detection
Security violation
Port Aggregation Protocol (PAgP) flap
Layer 2 Tunneling Protocol (L2TP) guard
DHCP snooping rate-limit
Incorrect GBIC / Small Form-Factor Pluggable (SFP) module or cable
Address Resolution Protocol (ARP) inspection
Inline power
Note: Error-disable detection is enabled for all of these reasons by default. In order to disable error-disable detection, use the no errdisable detect cause command. The show errdisable detect command displays the error-disable detection status.

Mail issue: not sending (addressed to multiple recipients in BCC

Hi,
I am having trouble sending a message to multiple recipients in the BCC field. I am sending to myself in the To: box and many others in BCC. It is not sending the message, either through my Mail program, nor through iCloud mail. iCloud mail gives me "Cannot send message. This message cannot be sent at this time." messge, but no explanation why. (iCloud mail seems to be working normally according to on-line status report). My Mail program give me a, "Cannot send message using the server smtp.me.com:(username)
The server "smtp.me.com" did not recognize the following recipients: [followed by long list of recipients all separated by commas] though it doesn't list all the recipients in the field.
Could it be that I just have too many in the field?
HELP! I'm in a time-crunch on this one.
It did send a test e-mail to me, just fine. No other reipients listed.)

AAARGH! Nevermind! I found the answer! over the 100 recipients-at-a-time limit.

Sql server agent alert is not sending a mail

1. sql server agent alert is not sending a mail .I have configure it for sql server event alert and error number 14151 and in "Raise alert when messaging contains" check box I have set: Replication Distribution Subsystem: agent
2. Sql server agent is restarted also.All database mail and other settings are Ok.
Still I m not getting mail
Thanks

Hi Ajay,
You can test the connectivity with any server who has smtp access and execute osql to send email to required people.
Below command can be put into bat file and named as DB_MirrorAlert.bat
osql -U XXXX -P XXXXX -S Test123 -h-1 -s "|" -w 50 -n -i E:\DBscript_Santosh\DB_MirrorAlert.sql > E:\DBscript_Santosh\DB_MirrorAlert.csv
OR
osql -E -S Test123 -h-1 -s "|" -w 50 -n -i E:\DBscript_Santosh\DB_MirrorAlert.sql > E:\DBscript_Santosh\DB_MirrorAlert.csv
In above command, you are connecting to a server where db email works fine for you and then you are executing a script wherein you can put alert for success or failure like below:
Success Alert:
Create a success alert file named as DB_MirrorAlert.sql as you are calling above in bat file and put all scripts in one folder.
use master
Go
EXEC msdb.dbo.sp_send_dbmail
@profile_name='Profile One',
@recipients =
XXX,
@subject = 'DB Mirror Server Failed over',
@body = '
'DB Mirror Server Failed over to Server B'
Now you can do this after checking that any one of the server is not responding or by checking system store procedures too. Good link about monitoring is mentioned below:
http://msdn.microsoft.com/en-IN/library/ms190030.aspx
Let me know if you need any more assistance at my end.
Santosh Singh

Alerts are not sending mails

Hi All,
Alerts are not sending any mails in my oracle applications 11i.
Wf test mails are working fine.Periodic Alert Scheduler also scheduled and run smoothly.
I am not understand where we missed any setups.
any one can help me...
Regards
Raghu

Raghu,
See other threads for the same issue in this forum.
https://forums.oracle.com/forums/search.jspa?threadID=&q=alert+%2Bnot+%2Bsending+email&objID=f475&dateRange=all&userID=&numResults=30&rankBy=10001
Hope this helps,
Sandeep Gandhi

My ical calender does not send email alerts anymore, now what?

The alerts are configured correctly, if I look at the alert it says that an email will be send (for ex. 09.00 the day before). However when the moment comes, the email does not. Can anyone help me with this one. This is the case since the upgrade to Mavericks.

Hi Patrick, I have the same problem as does everybdy else I guess - it just wont work!
I have set My Card in address book, tested it 100 times and whatever you do it ill not send an email alert? Everything I see on forums blah blahs about setting my card in address book and hey presto but none of it helps.
Someone MUST know if it will ever work or if it is another issues that apple will never resolve, instead they will just ruin a perfectly nice looking operating system by updating it and making my phone icons and notes / bookshelf etc look like it was bought from Toys R Us instead of an Apple store!
Did you find a solution to iCal not sending email alerts? DAVID.

Alert email notification does not send

Hi,
I have a problem with outgoing email alert notification.alert email just sent to site owner group with full access permission, but I config send alert me on list that send email immediately to all users of this site.
could anyone help me to resolve this issue?

As I know, you can only configure user/email address for 'Send Alerts To'.
SharePoint Group is not allowed in subscribe alert screen.
How did you configure alert? can you explain a bit here.
Please check if all your user has email address in their profile?
please 'Propose as answer' if it help you, also vote this as helpful if you like this reply.

Task Lists Alerts Will Not Send Using AD Groups

SharePoint 2010 (upgraded from 2003 to 2007 to 2010)
Exchange Server 2013
Alerts on Task Lists will not be sent if "Send Alerts To" is determined by AD group rather than being identified by specific user account.
This was working previous to our Exchange servers being upgraded to 2013, but sometime afterwards (we are not sure it was directly after) they stopped working. Our test server (straight 2010 install) still sends these alerts. The "you have
successfully created an alert" still works in both environments.
I have tried this on a new Task List, recreated the alerts, restarted the alert service, still no dice. The service is clearly still running, since it will send an alert to someone who is specified by their user account instead of just part of the
AD group. It can't be an Anti-virus or filter issue, since the same users can receive an alert when they are added directly to it, but not if they are added through a group. We have verified the settings in AD (and it's still working on the test
server anyway) and I can't think of what else to check.
( I followed all of the steps in the marked answer for
this post as well)
Could this be something spcific to the 'upgraded' version of SharePoint? That is the only obvious difference between our Prod and Test servers. Does anyone have any other ideas?
As always, thanks for any input!
Elli J Project Solutions Specialist Blog: http://projectserverpants.wordpress.com/

Inderjeet: The groups are both AD and Exchange, that terminology may have escaped me in my explanation. I'm a weird admin because I know little about the standard windows side and only work in Project Server and SharePoint.
The alerts work on our test server for the groups specified, and the "an alert has been created" function works just fine, so it seems like SharePoint is able to determine who is in the list and send to exchange just fine. It's just the "Alert me"
function for new items or changed items, etc, that's not sending. Thanks for your help!
Elli J Project Solutions Specialist Blog: http://projectserverpants.wordpress.com/

Alert not sending mail even if executed successfully.

hi all,
I have created alert in R12 environment. it is periodic alert which will fire everyday.
There are 2 actions
1. Run the Concurrent program and insert values emp_no,emp_name,manager_name,manager_mail into custom table.
2. Send mail to manager_mail containing data like emp_no and emp_name.
I encapsulated both the action in one action set. Sequencing 1. Concurrent Program ( Detail Level) 2. Send mail (detail level)
When i am executing alert, it is ending with completed successfully. It is inserting data into custom table but it is not sending mail to manager mail id.
When i tried to check history, it is showing 'n' number of exceptions, but all those exception are not available in FIND EXCEPTION tab.
I m not able to find out, what exactly wrong i have done.
Query is:
Select emp_no,emp_name,manager_name,manager_mail into
&l_emp_no,&emp_name,l_manager_name,l_manager_mail from xx_alert_table_data;
and I am passing &l_manager_mail into 'To' section of send_mail action. it is not containing any null data. all the email address are present in that field.
please suggest if i m doing anything wrong.

Just putting the data into tables is not the actual process, performing the connection to the email server and sending email.
Underneath it's a multilayered process .
Oracle Alert uses Oracle Workflow Notification mailer for sending requests, which in turn uses mailer program to send mails.
So, you need first to check the state of Notification mailer then locate logs of the mailer utulity used by these and see whether there were any connection/negotiation errors and what information in header fields has been actually sent.
To see notification mailer program status change responsibility to Workflow Manager, then go to "Service Components" section and find there Workflow Notification process.
To find the mailer type, change responsibility to Alert Manager, then go to System->Options and see which mailer is in use.
Usually on Unix, sendmail is used, so you may easily turn on debug logging and see the mail headers and complete negitiation logs, if you need them.

Alerts are not sending Emails

Dear All,
I am using "SAP Business One 2007 B (8.60.030) SP: 00 PL: 00".
Can u please tell me that why alerts not sending any mail?

You can check SAP note 1128463. Upgrade your PL might solve your problem.
Thanks,
Gordon

MMS is not sending or receiving on iPhone 5s and gets an alert needs to be activated.

MMS is not sending or receiving on Iphone 5s and gets an alert needs to be activated. Wind Mobile set up the MMS settings the data works the texts work but not MMS.

Cellular data is not used with SMS only. SMS are exchanged over the same network as calls. MMS with the iPhone requires cellular data. If you have MMS Messaging and Cellular Data enabled, the problem lies with your carrier.

Why with Maverick can I NOT send an email to Multiple contacts?

Why with Maverick can I not send an email to multiple contacts,? (no problems with Mountain Lion)

I have been having problems with addressing group emails I think only since Maverick. I have been unable to drag the group or copy the addresses into the "To" or "cc".
However if I have 2 groups (Say "Family Close" and "Family Others" if one TYPES Family in the "To" space the alternative are shown and when one clicks on one of these the "Bolded" group is shown and can be expanded etc
Bob Wines

Why can I STILL not send/receive MMS after trying every app, deleting, uninstalling, and resetting phone MULTIPLE times?

I've tried absolutely EVERY POSSIBLE suggested fix and nothing. I've had my phone since February, and it worked up until about 3 weeks ago. My phone hasn't done any updates that I'm aware of, and I've checked manually for updates. WHY???

I've been having this photo/multimedia message nightmare for a week now, too.
Friends will share pictures and none will come through as they did before. For example, just this morning (Sunday, May 25, 2014) a friend sent a message with a picture attached. I quickly got a "download" bubble in my message interface. These bubbles never showed up until a week ago. I clicked on the bubble, quickly a "downloading" bubble came up, and then (alas!) a message that the "download expired" appeared.
I tried a tactic: I sent a message to myself to see if my text messaging was working: this was just fine. Then I attempted to send a message with an image attached.
The message did not send at all.
I got a message saying " sorry, you cannot attach this image to this message." What is going on????
I only had the phone for a month now and don't understand what (if anything) is different in my settings. Help!

ALERT---ALERT since upgrading to last version 1/2 hour ago I can NOT send mail-ALERT ---

HI,
I upgraded to the latest version half an hour ago. My TB is in French. Since then I can NOT send mail. A window appears with the mention " adjunction of // ajonction de" and the blue bar keeps going up to 10 minute. After 10 min i decided to abort, restart TB, make another testmail but same problem.
Please act quickly

Hello,
Certain Thunderbird problems can be solved by peforming a ''Clean Reinstall''. This means you remove Thunderbird's Program Files then reinstall Thunderbird. Please follow these steps:
#Download the latest version of Thunderbird from http://www.mozilla.org/en-US/thunderbird/ and save the setup file to your computer.
#After the download is complete, close all Thunderbird windows (Click Exit/Quit from the menu button on the right).
#*'''Windows:'''
#** C:\Program Files\Mozilla Thunderbird\
#** C:\Program Files (x86)\Mozilla Thunderbird\
#*'''Mac:''' Delete Thunderbird from the Applications folder.
#*'''Linux:''' If you installed Thunderbird with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Thunderbird on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/en-US/thunderbird/ Thunderbird Download Page], simply remove the folder ''thunderbird'' in your home directory.
#Now, go ahead and reinstall Thunderbird:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to open Thunderbird after clicking the Finish button.
<b>WARNING:</b> Do not run Thunderbird's uninstaller or use a third party remover as part of this process, because that could permanently delete your Thunderbird data, including but not limited to, extensions,emails, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
Please report back to see if this helped you!
Thank you.

Multiple dbcontrol (EM) not sending alerts

Similar Messages

Maybe you are looking for