Multiple Details Sections in the same report

I'm trying to take two different columns from a fact table, and display them in one column on the report. So I'll then have the charge quantities (grouped and summarized) listed above the charge amounts (grouped and summarized) across months (columns).
Is there any way to have multiple detail sections in the same report, something like below? I tried sub reporting, but you can't subreport a subreport. I also tried cross tabs, but they're not flexible enough in the groupings I'm looking for.
Report Header
Group Heading 1
Details
Group Footing 1
Group Heading 1
Details
Group Footing 1
Report Footer
Thanks!!

Hi,
Inorder to create new Group Header sections like Group Header a and Group Header b.There are two options
->In the design mode of the crystal reports,Rt.click on the Group Header section-Choose insert section below
OR
->From the Expert tool bar->select the Selection Expert,choose the Group Header->click insert button

Similar Messages

Display multiple records as sub-sections in the same report.

I am using Crystal Reports (VS-2005).
In a report, I have various sub-sections in the Details section. Each section represents a category and is connected with SQL command which uses LEFT OUTER JOIN.
The first section is the main section and the subsequent sections are the child sections.
Sometimes, a sub-section (other than the first main sub-section) picks multiple records of that category. In this case the report extends to multiple pages. Each report displays one record of this sub-section.
I want to show the the same sub-section multiple times in the same report as opposed to multiple reports that are now automatically generated by Crystal Reports.
How to handle this issue?

This is a .NET programming forum related to Crystal Reports. Your question is best suited for our report design forum below. Also, when you post your question it will be helpful if you use report design terminology. We have elements like Report Header, Page Header, Groups, and Details sections. Just mentioning "sections" doesn't give us a good idea about what you are attempting to do.
Check out the grouping options and see if it helps. You might need to create a formula to help you with your grouping though.
If you like, I can move this to the design forum.
[SAP Crystal Reports Design|SAP Crystal Reports;

Add Multiple Detail Items Using the Same Query String Parameter

I am using InfoPath 2010 and SharePoint 2010.
I have 2 forms libraries - Expense and Expense Details.
The 2 libraries are linked via a custom site column Expense ID.
The Expense form contains the main header type info you would typically find on an expense report; e.g., name, purpose, department, etc.
The Expense Details form contains multiple detail expenses related to the main expense report such as airfare, rental car, etc.
I have created a page that displays an expense report with all of the related expense detail items.
The page contains a link to add a new expense detail and passes the Expense ID of the Expense form to the Expense Detail form.
This all works fine. The problem comes in after the first expense detail form is submitted.
I can successfully submit the first detail item. However, the expense detail form loses the Expense ID that was passed to it after the first expense detail form has been submitted.
The parameter still shows in the URL but the detail form no longer shows the value of the parameter.
What do I need to do in order to be able to add multiple expense detail items using the same Expense ID that was passed to the form?
I have tried using a Submit Behavior of Open a new form, Close the form, and Leave the form open.
None of these options give me what I need. Thanks for your help.
pam

Laura Rogers Blog
In case anyone stumbles upon this looking for an answer. Laura Rogers has the answer found in the comments section of her blog above. It’s not the best but it
does work. You have to add an extra Info Path Web Form for it to work. I know, you can roll your eyes.<o:p></o:p>
Steps.<o:p></o:p>
1. Add Query String<o:p></o:p>
2. Add the extra Info Path form to the page. This form will be a hidden on the page and will receive the value from the query string.<o:p></o:p>
3. Add your original Info Path form and have it receive a parameter from the hidden Info Path form.<o:p></o:p>
Now, when you hit save and it opens a new form the 3 Info Path form will function properly. <o:p></o:p>

How to combine multiple Details section rows in my report

Hello,
I am currently creating a report which will display employee details, which includes first name, last name, home phone, cell phone and Email.
I get my First Name and Last name from the "Employees" table but all other info is situated in the "CommunicationLinks" table.
The tricky part which I am having issues with is the Home Phone, Cell Phone and Email are all under the same field in this table, the field is called "DisplayAs".
These 2 tables are linked together by taking Employees.LinkID and linking it to CommunicationLinks.LinkIDParent, which are matching linkids.
The only issue that I have, is for example, if you look at the screenshot provided, I have 5 details section that gets populated for the same employee.
How can I combine all these 5 records to only one?
The homephone, cellphone and email field have formulas created for them, the formula is as follow.
This example below is for the HomePhone field, the others have different type assigned to them
If {CommunicationLinks.Type} =1 then
{CommunicationLinks.DisplayAs}
else ""
Homephone, Cellphone and Email are all different types but uses the same field "DisplayAs".
I also tried creating a subreport for each of these fields but seems to give me the same results.
Any help would be really appreciated.
If you have any other questions please let me know. See attached screenshots for reference.
Thank you in advanced.
Jocelyn

Easier way without working in SQL:
1. Group by a field that is unique to the employee.
2. Suppress the employee group header and the details sections.
3. Create a couple of formulas:
{@ClearVariables}
WhilePrintingRecords;
StringVar HomePhone := "";
StringVar CellPhone :="";
StringVar Email := "";
Put this formula in the employee group header - even though the section is suppressed, it will evaluate.
{@SetVariables}
WhilePrintingRecords;
StringVar HomePhone;
StringVar CellPhone;
StringVar Email;
if {CommunicationLinks.Type} =1 then
HomePhone := {CommunicationLinks.DisplayAs};
else if {CommunicationLinks.Type} = <type for cell> then
CellPhone := {CommunicationLinks.DisplayAs};
else if {CommunicationLinks.Type} = <type for email> then
Email := "";
Put this formula in the details section - it will evaluate even though the section is suppressed.
{@HomePhone}
WhilePrintingRecords;
StringVar HomePhone
(Do the same for Cell Phone and Email. Note that there is no semi-colon at the end of this one!)
Put these formulas and all of the rest of the employee data in one or more Employee group footer sections.
-Dell

Multiple details table on the same page

Newbi to APEX. Can I have muliple details table for update/insert in tabular format on the same page with the same master? Thanks!

In the meantime, I can answer to your questions:
· Why does JHeadstart not make use of the UIX-Struts integration (see Chapter 15 of the UIX developers Guide)?This has been done to allow the same page to be run both with Struts and MVC Framework, without needing to change the page. Using the UIX-Struts integration would have made the pages 'controller aware'.
· How do you specify which columns/attributes in a Table Layout are sortable?As far as generation is concerned, you can only specify the whole table to be sortable. In case of UIX you can post-gen modify the <sortableHeader> tag of each column separately. In case of JSP you can remove the <a href> tag for each column that you do not want to sort on.
Jan Kettenis
JHeadstart Team

Multiple Facts at the same report

Hello gurus,
How can I use multiple facts at the same report using OBIEE 10g?
I followed the instructions of this website but it's not working...
http://obibb.wordpress.com/2010/05/31/multiple-fact-reporting-on-non-conforming-dimensions/
Physical Model:
ASSET (DIMENSION) ------------ ASSET (FACT) ----------------- PERSON (DIMENSION) ----------------- CAMPAIGN (FACT) ---------------- CAMPAIGN (DIMENSION)
Business Model:
ASSET (DIM) ---------------- FACT ------------------- CAMPAIGN (DIM)
                           (ASSET - CAMPAIGN)
                                        |
                                        |
                                        |
                                        |
                              PERSON (DIM)
Asset and Campaign: Non conformed Dimensions;
Person: Conformed Dimension;
Note that I want to use at my report some asset and campaign informations to answer questions like:
Wich assets were created after the campaign launch? or List of asset by person and campaigns.
Is it possible to do? I'm trying to change all kinds of column levels (Total/Detail) and it keeps sending an error like:
"Internal error: No matching table for expr Fact_W_CAMP_HIST_F_Teste.SOURCE_WID, File server/Query/Optimizer/SmartScheduler/PhysicalRequestGenerator/Src/SQOSPSimplifyJoin.cpp, line 118."
Thank you in advance.
Ramon Cortez

Hello,
Thank you for your help.
Now I'm getting this error: "None of the fact tables are compatible with the query request Fact.SOURCE_WID". ---> Fact.CAMPAIGN_WID
I'm actually not sure about the behaviour of the content tab. As I understood, I must use Total for non-conformed dimensions and detail for conformed, right?
In this case I have:
ASSET (DIMENSION) ------------ ASSET (FACT) ----------------- PERSON (DIMENSION) ----------------- CAMPAIGN (FACT) ---------------- CAMPAIGN (DIMENSION)
So, at Asset (FACT) content tab I have to set detail for Asset (DIM) and Person (DIM) and total for Campaign (DIM).
At Campaign (FACT) content tab I have to set detail for Campaign (DIM) and Person (DIM) and total for Asset (DIM).
But at the columns, if I set detail for Campaign(DIM) as total, all the other columns will show only Campaign at content tab. Why is it happening?
My requeriment measure is like:
SUM(CASE WHEN Asset.Date1 BETWEEN Campaign.DateA and Campaign.DateB AND Asset.Product = Campaign.Product and Asset.Status = 'Active' THEN 1 ELSE 0 END)
How can I do this using person as conformed dimension?
Thanks,
Ramon Cortez

Creating a Detail Table Based on an Action in Another Table or Matrix to Display in the Same Report (Not a Drill-Through)

Hello,
I was wondering if it's possible have a matrix which shows total credits by month and have drill-down groupings to display the invoice numbers for each credit. Then, once the drill-down is expanded for a particular month, be able to click on the invoice
number and have another table under the matrix display the details of the invoice.
I don't really want a drill-through because that opens a different report in the window, what I want to be able to do is stay on the main report. I also don't want to drill-into the invoice details from the matrix as that expands the matrix out and
makes it unruly and ugly. I've been playing with subreports but not able to get what I want out of it.
I hope this makes sense - is there a way to do this in SSRS?
Thanks!!

Hi AvenueStuart,
After testing the issue in my environment, we can refer to the steps below to work around the issue:
Create a new table with the details of the invoice under the matrix.
Add a parameter named invoice which get available values from the invoice field in the dataset.
Right-click the [Sum(invoice)] cell to add an action with “Go to report” option, and specify the same report with the parameter below:
Name: invoice
Value: [invoice]
Right-click the table to add a filter in the table:
Expression: [invoice]
Operator: =
Value: [@invoice]
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Comparing fields from multiple entities in the same report (report builder 1.0)

Created a model that contains 2 entities. I open that model in report builder 1.0. When I drag a field from one of the entities into the design area, i can no longer see the other entity or use any of the fields from that other entity.
I need to use fields from both entities in the same report (join tables). In management studio i would simply write a query and join tables but i cannot figure out how to do this in report builder. Once i select a field from one entity
how do i select fields from more than one entity and drag them into the same report.

Would it be possible for you to send me instructions for this? I am not that familiar with SQL coding but I can definitely figure it out. I have been wanting to get information on reports from multiple entities for a very long time! The only way I can
currently do it is have our document management software people write the report for me for quite a large fee. I would much rather do this myself. Right now I can select a few fields from one entity (the main one), some from a second entity under that one,
but I cannot add any fields from a third entity! Quite annoying and hindering! Thank you :)

Sub-details in the same report at a double click

Hi All,
Can anyone let me know how to display the below details in the report?
Initially we can display the basic list with month details. Say we have 12 months (12 lines) in the output. Now if I double click on the month (say March), in the same report under the march month, it has to display the number of weeks (say 5 weeks). Is it possible to display the information using the normal ALV function modules.
Kindly do the needful.
Thanks in advance.
Regards
Ramesh.

Hello,
You can use Hotspot for the month and Onclick command change the internal table with new entries and display this new internal table with Refresh Command.
Refer SALV_TEST_TABLE_REFRESH.
Thanks.
Nagendra

Adding multiple subreports from the same file to the same report

I've created a report. This reports needs to have a number of charts. Each chart is the same report with different values for parameters.
The code works, except all charts reflect the parameter value provided to last call to SetParameterValue. How can I make sure each subreport behaves as a separate instance?
string chartReportPath = AppSettings.ReportsFolder + "ProgramCountry-Chart.rpt";
            ReportClientDocumentWrapper doc = (ReportClientDocumentWrapper)report.ReportClientDocument;
string chartName = "Chart" + chartCount++;
CrystalDecisions.ReportAppServer.ReportDefModel.Section detailSection = doc.ReportDefController.ReportDefinition.DetailArea.Sections[0];
SubreportClientDocument subReport = doc.SubreportController.ImportSubreportEx(chartName, chartReportPath, detailSection,0,detailSection.Height+10,-1,-1);
            ReportDocument subreportDoc = report.OpenSubreport(chartName);
                report.SetParameterValue("@MyParam, myValue, chartName);

Hi Brian,
The parameter collection is global, so if you set it for one it's going to be set for all. You need to manage the subreport links, which holds the parameters.
Or when you add the subreport you also need to add a parameter with a new name and set the value accordingly in the Parameter collection.
Sorry i don't have any sample code for this work flow.
Don

Run a query multiple times in the same report for different nodes in Hier

Hi,
I have created a query as per my requirements. But my issue is I need to run the report for all the profit centers in a hierarchy. Right now I enter a node value of the hierarchy in the variable and I get the result. But I want to run it for each node in the hierarchy and display the result in the same report.Is it possible to do so in web using information broadcaster or any BI 7.0 tools. Has anyone done similar to this in web. I would prefer the web route rather than the excel but if excel is the only answer I will follow the excel path.
Looking forward to your suggestions on this.
Thanks,
Kal

Hello Kal,
if the number of Profit Centers is limited, you could probably work with query views (one for each PC) and include all these into your Web Template.
If this is not appropriate, I don´t know if there is any way of programming possible.
Regards
Cornelia

Correcting Multiple Schedules on the Same Report

Hi Created a report and scheduled it to run daily at 8am. Works Great. two months later a change is requested I make the change and republish the report, but fail to schedule it for the same time. Now I have the same report with the same name scheduled and running to the end user twice daily - 8 am and 2pm. she only wants to see it once a day. Furthermore I have another change request for the report which I have made and am now ready to republish and reschedule version 3.
Is it possible to remove the Scheduling jobs for the first two versions, but preserve the 100+ instances in the infoview folder that she may still want to access, and also publish the 3rd version and schedule it for 8am and keep them all as the same name and make it appear seamless to the end user?

Hi ,
Log in to CMC and Navaigate to the scheduled report then select the report and see the History of teh Report . from the History select the previous versions of the Scheduled jobs from the list click on the actions and delete .

Can't create multiple dependent LOVs from the same bind variable

Hi all,
I'm having difficulty creating multiple dependent LOVs from queries based on the same bind variable in my JSF application (JDev 10.1.3.1). Basically I have a static LOV in a af:selectOneChoice component from which users select a value which then becomes the bind variable value for two separate queries that generate two different dependent LOV. Having developed the code along the lines of Steve Muench 's blog (http://radio.weblogs.com/0118231/2006/04/03.html#a685), the first dependent LOV works really well. The first dynamic LOV gets refreshed whenever the list from the static LOV changes, and I can execute other queries based on the values selected.
The problem arises when I want to create the second dynamic/dependent LOV that has the same bind variable based on the same selected value from the static LOV. Here I would also like the functionality whereby the second dynamic LOV is also refreshed after the selected value in the static LOV changes. Thinking that all I had to do was replicate the methodology used in creating the first dependent LOV, I created the second iterator, invokeAction and other binding components in the PageDef. The executable section now looks like the following:
<iterator id="SelectStaticQueryViewObjIterator"
 Binds="SelectStaticQueryViewObj" RangeSize="-1"
 DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery1BindParameter"
 Binds="ExecuteWithParams1" Refresh="prepareModel"
 RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery1ViewObjIterator"
 Binds="SelectDynamicQuery1ViewObj" RangeSize="-1"
 DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery2BindParameter"
 Binds="ExecuteWithParams2" Refresh="prepareModel"
 RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery2ViewObjIterator"
 Binds="SelectDynamicQuery2ViewObj" RangeSize="-1"
 DataControl="DMSApplicationModule1DataControl"/>I now have a problem whereby everytime I change the value of the static LOV, multiple HTML components for the same ADF component are being generated (the LOVs are refreshed via PPR). The surprising thing is that this duplicating behaviour applies to all ADF components listed after the first dynamic LOV in the *.jspx source. For example, I have a <af:outputText="Test Text"/> component created after the first dynamic LOV. Each time the value in the static LOV changes, a duplicate HTML component is created. This also applies to the 'related' second dynamic LOV which is bound to a af:selectOneChoice component - multiple dropdown lists are created. I've checked with the browser's Page Source and there are actually multiple html components being generated with their own unique ADF-generated IDs. I've tried all different options for the Referesh and RefreshCondition attibutes in the second invokeAction element but nothing seems to eliminate this issue.
Any suggestions about how I might create multiple dependent LOVs from the same bind variable that get refreshed when the selected value changes would be greatly appreciated.
Thanks
George

Hi all,
Just updating the thread on how I've overcome this issue. As it stood the manner in which I was trying to solve my use case, as described above, was creating an absolute mess. Then with a blank sheet of paper I quickly realised that a much simpler solution would be to create a whole series of master-detail VOs and build my components around them. Thankfully I haven't had any issues going down this path as yet.
Cheers
George

Problems underlaying multiple detail sections

I'm having difficulty with Crystal XI - report has multiple detail sections, I would like to underlay them so they appear on top of each other, but I just can't get it to work.

Your explanation isn't detailed enough to allow someone to help. I'd suggest two courses of action:
1) Run the data and form through Central with tracing turned on. This will provide you with detailed information on what is happening when and why. You should be able to see what's triggering the subforms.
2) Post another note, this time with an example of your data and a more detailed explanation of your result (e.g. I have 3 details and 3 totals and they're coming out in the following order D1,D2,D3,T1,T2,T3 instead of D1, T1, D2, T2, D3, T3) and I'll try to help.
Rob McDougall
Indigo Pacific Ltd.

Multiple ALV Grids on the same window.

Hi,
Can someone tell me if it's possible to display multiple ALV grids on the same window.If so how is it done.Please note that I am talking about Grid Display and not List Display.
Regards,
Swathi Balakrishnan

Hi,
This can be done even i have done a report.
Its very simple create three containers as below.
Just repeat three times if u need to create three containers.
See this sample code using custom container.
START-OF-SELECTION.
Begin of process logic
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
 text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS01'.
SET TITLEBAR 'SALESTTL'.
A L V G R I D
IF o_grid_container IS INITIAL.
 CREATE OBJECT o_grid_container
 EXPORTING
 container_name = 'CCONTAINER1'.
 CREATE OBJECT o_grid
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid_container.
FOR first A L V G R I D
 PERFORM set_grid_field_catalog
 CHANGING i_grid_fcat.
 PERFORM modify_grid_fcat_predisplay
 CHANGING i_grid_fcat.
 PERFORM set_grid_layout_set
 CHANGING struct_grid_lset.
 PERFORM sort_outtable CHANGING i_sort_fcat.
PERFORM populate_grid_data TABLES i_grid_outs i_grid_outs_pro.
 SORT i_grid_outs BY year month.
 CALL METHOD o_grid->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid_lset
 CHANGING
 it_outtab = i_grid_outs[]
 it_fieldcatalog = i_grid_fcat[]
 it_sort = i_sort_fcat. " Period
ENDIF.
IF o_grid1_container IS INITIAL.
 CREATE OBJECT o_grid1_container
 EXPORTING
 container_name = 'CCONTAINER2'.
 CREATE OBJECT o_grid1
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid1_container.
* FOR SECOND ALV GRID
 PERFORM set_grid1_field_catalog
 CHANGING i_grid1_fcat.
 PERFORM modify_grid1_fcat_predisplay
 CHANGING i_grid1_fcat.
 PERFORM set_grid1_layout_set
 CHANGING struct_grid1_lset.
 PERFORM sort_outtable1 CHANGING i_sort_fcat1.
PERFORM populate_grid1_data TABLES i_grid1_outs i_grid1_outs_pro.
 SORT i_grid1_outs BY year month.
 CALL METHOD o_grid1->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid1_lset
 CHANGING
 it_outtab = i_grid1_outs[]
 it_fieldcatalog = i_grid1_fcat[]
 it_sort = i_sort_fcat1. " Period
ENDIF.
IF o_grid2_container IS INITIAL.
 CREATE OBJECT o_grid2_container
 EXPORTING
 container_name = 'CCONTAINER3'.
 CREATE OBJECT o_grid2
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid2_container.
FOR THIRD ALV GRID
 PERFORM set_grid2_field_catalog
 CHANGING i_grid2_fcat.
 PERFORM modify_grid2_fcat_predisplay
 CHANGING i_grid2_fcat.
 PERFORM set_grid2_layout_set
 CHANGING struct_grid2_lset.
PERFORM populate_grid2_data TABLES i_grid2_outs i_grid2_outs_pro.
 SORT i_grid2_outs BY year month.
 PERFORM sort_outtable2 CHANGING i_sort_fcat2.
 CALL METHOD o_grid2->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid2_lset
 CHANGING
 it_outtab = i_grid2_outs[]
 it_fieldcatalog = i_grid2_fcat[]
 it_sort = i_sort_fcat2. " Period
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE user_command_0100 INPUT.
As the events are registered as application events, control is first
passed to the program's PAI. The call 'cl_gui_cfw=>dispatch' will
forward control to ABAP object event handling and the appropriate
event handler will be called (if present). This allows the user to
selectively process events.
DATA: i_return_code TYPE i .
CALL METHOD cl_gui_cfw=>dispatch
 IMPORTING return_code = i_return_code.
save_ok = ok_code.
CASE save_ok.
 WHEN 'BACK' OR 'END' OR 'CANC'.
 PERFORM exit_program.
ENDCASE.
CLEAR save_ok.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form EXIT_PROGRAM
 text
FORM exit_program.
CALL METHOD o_grid_container->free.
CALL METHOD o_grid1_container->free.
CALL METHOD o_grid2_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
 Error in FLush
ENDIF.
LEAVE TO SCREEN 0.
ENDFORM. " EXIT_PROGRAM
If u want get more idea revert back to me.
Thanks & Regards,
Judith.

Multiple Details Sections in the same report

Similar Messages

Maybe you are looking for