Multiple effects (transformations) to an object?

Multiple effects (transformations) to an object
Applying multiple transformations to an object and remembering each one is confusing. Which one is rotate, horizontal move etc. So you have to hide/unhide every single one of them, because they all say TRANSFORM.
Give us the ability to add notes or some kind of names to the live effects.

You could certainly do that and there's nothing wrong with that. You could have the question as element [0] and the array of potential answers as element [1]. I would typically use a database for this stuff but if the answers and questions don't change much, your method is fine, imho. You might also, however, consider storing a right/wrong bit with each answer so that the second element is an array of arrays in which the second level array is the distractor and its 'correctness.' That way, the answer will travel with the distractors. So, in short, nothing wrong with your method in my opinion.

Similar Messages

Identifying all TR/UR/Transformations for LOOKUP Object in whole BW System

Hi ,
I have one ODS object ZTEST in BW system. This ODS object is used in many other data flow's Transfer Rules, Update Rules and Transformations as LookUp object like
SELECT * FROM /BIC/AZTEST00 INTO ITAB WHERE DELIVERY = DATA_PACKAGE-DELIVERY
Now how can i findout all the Transfer Rules, Update Rules and Transformations where this ODS object ZTEST is used as the Lookup object in all BW system .
Please let me know the step by step procedure for it .
Regards
Mubeen

Mubeen,
This is kind of hard to do.
One thing that can possibly alleviate your effort would be to look for
/BIC/AZTEST00 in the table RSAABAP.
But this is not a complete output and you will still have to trace back the generated programs to the original TR / UR etc... but thien - this might give you a start.
P.S We tried this in a previous project but gave up because :
1. We could not trace the original transformations effectively
2. The output of RSAABAP is not a complete list - but it gave us an idea..

Link Smart-Object Filter mask to transformation of Smart object

Often it would be very nice, if you could link the filtermask of a smart object to the smart object itself. So that when you transform the SM (rotate, scale etc) the filtermask of the smartfilter is transformed, too.

It would seem if a linked layer mask can be transformed with the smart object the filter mask could be linked as well.
I didn't mean the workaround to be vote against the request. But it does have an added benefit. When you transform a smart object with almost any smart filter the appearance of the filter changes. Blurs become more or less blurred depending on the transform. Same with sharpen. If you want the effect of the filter to appear the same after the transform you need to embed it into a new smart object.

[svn:fx-trunk] 10135: Fix to effects' transform center functionality.

Revision: 10135
Author:   [email protected]
Date:     2009-09-10 15:38:22 -0700 (Thu, 10 Sep 2009)
Log Message:
Fix to effects' transform center functionality. When autoCenterTransform=false, should default to the transformX/Y/Z specified in the target object. We were instead defaulting to a default Vector3D(), which is like having transfomrXYZ at (0,0,0). one-liner fix to initialize the default transform center with the target's transformXYZ values.
Also fixed unrelated typo in UIComponent asdocs.
QE notes: None
Doc notes: None
Bugs: sdk-21766
Reviewer: Jason
Tests run: checkintests, Mustella transform effects
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-21766
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AnimateTransfor mInstance.as

I had downloaded it for test, and requested for evaluation license...
But I haven't got license, and also I am not able to find Flash Builder Plugins from HFCD site....
I think those plugins are removed from site....
Please help me, if anyone have those plugins...

How do you add multiple effects to the same clip

How do you had multiple effects to the same clip. I have tried for hours
I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
anyone please.

Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
Aged Movie should already have a bit of a sepia tone.
If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
Note: Thanks to Jeff Carlson of MacWorld for this tip.
If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

Add multiple effects to a title and to a video

I have an edited video and inserted a title before the video starts. I would like to have the title zoom and while zooming, fade in. I apply the zoom to the begining of the title on my timeline, edit the duration and the start and end size then try to add a fade but the fade overwrites the zoom. On all the videos I found, they drag and drop the effects onto the clips on the timeline (I have to add them to either the front or back) then it appears on the Effect Controls under Video Effects. When I do it, I do not see the effect under that, I can only see the effect options when I click on the effect on the time line.
I have tried the same thing to the video itself and can only add one effect to each clip.
What am I doing wrong? How can I add multiple effects to things on my timeline?

Here is a +1 for Jim's suggestion to look into Keyframing the Fixed Effect>Motion>Scale, to create your Zoom.
You could well explore Keyframing another Fixed Effect>Opacity, to have more control over your Fade-In too.
Good luck,
Hunt

How to add a fade effect to the Application object ?

Hy,
i want to add a fade effect to the Application object, but my code does not work, can you take a look please:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                            usePreloader="false"
                            mouseDown="stage.nativewindow.startMove()"
                            layout="absolute"
                            width="304"
                            height="527"
                            alpha="0"
                            creationComplete="init()">
        <mx:Script>
                <![CDATA[
                        private function init():void
                                application.setStyle("showEffect",fade)
                ]]>
        </mx:Script>
        <mx:Fade id="fade" duration="1000" />
</mx:Application>
Thanks

Hi,
Here is an example of how to add effect to a button: http://livedocs.adobe.com/flex/3/html/help.html?content=behaviors_06.html

Modification of an object deactivates transformations of other objects

Dear Gurus,
I have the following issue:
I want to modify an object, eg. GFIFISPER. There is only one transformation related to this object: RSDS DS_GFIFISPER_ATTR BWFLATFILE -> IOBJ GFIFISPER.
However, when I modify and activate GFIFISPER, not only this one transformation gets inactive, but also all transformations related to objects in which GFIFISPER is an atrribute.
This happens not only for GFIFISPER but also for all other InfoObjects in this box (server).
It didn't happen earlier and also in other boxes (like a sandbox) it doesn't happen (only transformations related to the changed object get inactive). Are these any particular settings of the box which were changed in the meantime? What can I do to prevent all these transformation from deactivating?
Thanks in advance,
Peter.

Hi,
Instant Solution to make active all other transformations is RSDG_TRFN_ACTIVATE and RS_TRANSTRU_ACTIVATE_ALL
I am still looking on How to prevent this situation.....?
Regards,
Suman

Multiple adjustment layers vs. multiple effects on a single adj. layer

I posted this earlier on the Creative Cow forums, and came back with inconclusive answers...
If I have the exact same clip in 2 separate comps...In Comp 1 I have 5 color correction effects on a single adjustment layer, and in Comp 2 I have 5 adjustment layers with the same effects, 1 effect each spread over the 5 adjustment layers (in the same order). Should I theoretically expect to get the exact same image in both comps?
Here's the reason I'm asking. I'm doing some color correction that occasionally involves a lot of keying, which I'm doing in Colorista II. It's not green/blue screen keying, it's keying the shot footage for adjustment, e.g. skin tones, backgrounds, blown-out highlights, etc. I'm finding that in order for the Colorista II keyer to work based on previous instances of effects calculations (i.e. Levels, Hue/Sat, or other Colorista instances, all of which occur *before* the key) I'm having to put it on another Adjustment Layer for the keyer to take the earlier effects into account. Otherwise, if it's on the same adjustment layer, the Colorista keyer disregards the previous effects & uses the un-effected clip as the source for the key.
I don't know if this is just the way the Colorista II keyer works, or if this is a global After Effects-wide order-of-operations thing that I don't fully have a handle on. I understand order of operations, and that Adjustment Layers affect all layers below it, and all that stuff. My question is, what (if anything) is the difference in behavior between multiple effects on a single adjustment layer vs the same effects spread out over multiple adjustment layers? Is it predictable & consistent? Or is it just common knowledge (to everyone else but me) that sometimes you have to use multiple adjustment layers based on the specific effect combinations that you're using?

I don't know if this is just the way the Colorista II keyer works, or if this is a global After Effects-wide order-of-operations thing that I don't fully have a handle on.
As far as I understand the SDK, it is not considered practical, since it would require a plug-in to establish its own comp buffer outside the main rendering pipeline, which could lead to issues with color consistency and things like premultiplied vs. straight Alpha. I also seem to remember that as of CS5 it is actually no longer technically possible. Hence effects that use specific source footage API calls will bypass any previous effects and directly operate on the source.
My question is, what (if anything) is the difference in behavior between multiple effects on a single adjustment layer vs the same effects spread out over multiple adjustment layers? Is it predictable & consistent?
The result should be the same under all circumstances, assuming all adjustment layers have the same opacity and no masks and their stacking order is equal. Only when you apply masks or adjust the opacity to fade specific adjustments you will see differences. It is also to note that having all effects might be a bit faster and more efficient, since less data is passed from buffer to buffer...
Mylenium

Hello, i'm creating a very simple animation in ps cs5, but when I try to transform a smart object in a frame, all the frames are affected by it. What can I do ? Thanks, Ep

Hello, i'm creating a very simple animation in ps cs5, but when I try to transform a smart object in a frame, all the frames are affected by it. What can I do ? Thanks, Ep

Ok, you are in frame animation mode. I thought cs5 had a timeline mode, but now I think I was wrong.
In frame animation mode what you do is in one frame you have the object rotated in one position, then select an other frame and rotate it. If it rotates the first frame, which I think it will. Create duplicate of the object in a new layer. Then rotate the second layer.
At this point in my example you would have two layers, one of which has a rotated object.
Clear the frames
Convert the two layers to frames.
You now have two frames, one for each layer.
Select both frames then click the tween button.
This will create the in between frames.
In the tween dialog box the higher the number of frames set here, will create a smoother animation but will result in a longer time frame for the animation to play.
Because Photoshop has no way of knowing which way the object should rotate, it is feasible for it to rotate the opposite direction or could look wonky. Just undo and add an in between layer showing how it should look in the middle, then continue on.
So your layers should be the following, a frame that shows all objects in their rest state.
All objects that remain in a rest state must be copied to the next layer (ctrl-j on Windows or cmd-j on Mac)
All subsequent layers are then used for rotating a duplicate of the object. (Ctrl j or cmd j)
You will find the commands to clear the frames, convert layers to frames and tweeting in the hidden menu found when you click the small icon in the upper right hand corner of the animation panel.

Multiple effects as one single preset?

This would be incredibly useful- having one preset that contains multiple effects in it. This cannot be done, can it?

But, you can apply all the effects to a single clip, do a right click Copy/Paste Attributes to kind of achieve the same result. At least within a single project.

Multiple effects or plugins in a preset?

I create alot of looks or effects that require 2 or more effects or plugins and quite often I need to use them again in later projects.
Apart from creating a preset folder named "The Effect" and puting all my plugins/effects in them for later use and making sure I have the right stack order,is there a simpler way you can have an effects preset that contains all effects & plugins?
or is this another feature request?

The instructions here describe how to save an effect preset that consists of multiple effects. Is that not working for you?

Apply multiple effects at once in imovie hd?

i have applied multiple effects to a clip ("adjust color," "soft focus" "brightness and contrast" etc).
the effects in combination create a distinctive look which i would like to apply to a whole movie. but it takes a long time to apply each effect.
is there a way to copy or save a group of effects as a set, and then apply them all at once in order to save time?

how MUCH faster is FC for rendering effects?
Not any faster at all.
The difference is that you can apply them all within a few seconds and then have lunch (or whatever) while FCE renders ALL of them in sequence without further user interaction.

Unable to add multiple Effects in iPhoto...

How can I apply multiple Effects to any image in iPhoto for iPad(eg: apply If I apply Vignette and then try the Aura effect, I loose Vignette effect!!!).
Any Solution??? Need help!

Multiple effects are not supported in the current version of iPhoto for iOS.
See my response in this thread: https://discussions.apple.com/thread/3826301

How To: Multiple Effects Upon Move In

Object One does a Flip Effect. During flip Object Two does a Move In from Top-Left to Bottom-Right. Need to also Scale Object Two as is crosses the screen. Only way to Move In from Top Left off screen is to Build In, but can not Scale during a Build In. If I could get some Off Screen space around left and top margins of the work area then I could Move objects on/off screen fine. As is I drag an object as far to the top/left as I can, but still get a shadow from the object until effect takes place. Can we center the viewable work area in the window? Maybe something like Anime Studio or Strata 3D allows for characters to move in from 'Off Stage?'

The work around many people use is to group a visible object with one that's invisible (like a shape with no stroke or fill). The invisible object is ON slide, the visible object is just off the slide, and they are grouped. Think of the invisible object as a handle, and Keynote does actually display the invisible object on your slide until you run the show, then it goes completely invisible.
Hope that makes sense!

Multiple effects (transformations) to an object?

Similar Messages

Maybe you are looking for