Multiple GRN PRINTOUT for single materail document

Hi
I have a PO for 10 line items, when i do GR sytem is generating 10 printout with 10 spool number, however each printoput contains all the 10 line items but why the system is generating 10 times , can anyone help me out in solving the issue..
Suggestions will we worth appretating.
Regards
Sarfraz

Hi,
GOTO.>> SPRO>>MM>> Inventory Management & Physical inventory>>Print control>>General setting.
Click on Print Version, ANd assign Print Version 3 to the MIGO transaction.
Specifies the version of the goods receipt/issue slip.You can print out three different versions of a GR/GI slip:
Collective slip (version 3)
In this case, a collective slip including all the items in a document is printed.
Pravin

Similar Messages

How to generate multiple idoc's from single appl document

All,
Iam looking for a way to generate multiple idoc's from single appl document (sales order). Based on the plant details on line items in the sales order i have to generate multiple idocs, i.e., send one idoc to each plant entered in sales order line items. any help will be appreciated.
Thanks

Hi,
You can create a Z-program and call Function Module <b>MASTER_IDOC_DISTRIBUTE</b>.
You can make a call to this FM to send the Idoc as many times as u have plants in your Sales Order.
You can call FM <b>IDOC_OUTPUT_ORDRSP</b> to fill the IDoc structure.
Then u can keep the materials of only that plant for which u want to pass on the information.
Thanks,
Utsah Garg.

Multiple webdynpro applications for single webdynnpro component

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance .
Rgds,
Praveen

Hi Saravanan,
I need to modify it from the portal end, not at the application level.
I need some configuration steps which specifies how to modify the Detail Navigation in PPM. Using SPRO we can do some configuration, i wanted to know whether its possible from portal end as well.
Regards
Shivas Bhan

Multiple contact persons for single vendor--LSMW

Hi experts,
i want to upload multiple contact persons for single vendor. using lsmw direct input method or recording method is it possible..if possible can u let me know the procedure.
Thx in advance,
Neelu

Hi
in our company v wil upload contact person details in Sales Data......
so its not possible to upload more than one contact person for vendor....
can u tell me wr u people wil enter the contact person details?
Regards
Smitha

Multiple storage locations for single material - ECC 6.0

Hi
Can anyone let me know, how one can map multiple storage loctions for single material?
regards
Sanjay

hello,
Go to SPRO --> IMG --> Materials Management --> Inventory Management and Physical Inventory --> Plant Parameters.
Tick Create storage locations automatically. System will extend the material to the storage location maintained in the transaction.
Nikhil

MX Electronic accounting - Set multiple UUID for single MIRO Document number

Greetings everyone
In my company already implemented the neccesary changes required by the new laws in MX Electronic Accounting inside the MIRO transaction (note 2093189), as well as the related notes requested for electronic accounting. Everything's working fine so far since right now we save the UUID field from CFDI XML file into an Invoice Document number. But now in my company request to save multiple CFDI invoices into a single Invoice document number. My approach seems to be simple because we only need to generate a new window to save the multiple UUID numbers and link the Invoice Document Number (BELNR), company code and fiscal period/year and UUID document into a Z custom table. But I have some questions that I'm not sure how will affect:
How does affect the montly policies report that we need to send to the government (SAT).
How do we need to handle the policies XML file in this type of scenarios
Any of you have the same scenario?
how do you handle this kind of scenarios?
So far I read the following notes but I can't find a clue so far for this kind of scenario (Am I missing something?)
(MX) Contabilidad Electrónica - RME 2014 Anexo 24
Notes:
http://service.sap.com/sap/support/notes/2041490
http://service.sap.com/sap/support/notes/2093189
http://service.sap.com/sap/support/notes/2042663
Thanks in advance and best regards
Lorenzo Martín Olmos

Hi Shekhar
Thanks a lot for you comments and I apologize for the late reply. As you point this is the most common scenario. In my case when the creditor is the Mexican Social Security Institute (IMSS), and after the payment, either IMSS and INFONAVIT (the governments institute for workers housing) generates different CFDI invoices.
How do you currently handle this scenario?
Thanks for your comments. Warm regards
Lorenzo Martín Olmos

Multiple cost documents for single shipment document

Hi All,
My recuirement is as follows. (this is for Cement industry implementation)
1) In a shipment document i wil inculde mustiple deliveries for which a single route wil be deterimined and only one stage is used. For Ex. I include 10 deliveries say dly no. 1 to 10. now when my vendor sends bills for the services rendered. ill be making payment only for the deliveries which vendor sends the bill. say vendor sent bills for dly nos. 1,2,4 7, 8 and 10.
so my query here is when i created a single shipment document for all the 10 deliveries, i would like to make the payment for the selected deliveries only. is this is possible ? if yes please what all the possibilities ?
2) same as point 1. but when the routes are different.
please explain on the both the scenarios.
Regards
Sree...

As you aware that,
Shipment cost created to capture the freight involved in that consignment. Once consignment is finished then vendor issues bill to the client. vendor bill doesnt reflect to the shipment cost, where when you save the shipment cost document service entry sheet will be generated which is used in vendor invoice verification, but not the shipment cost document.
if client wants to charge the frieght calculated in shipment cost document in Customer invoice, you have to create shipment cost document ,before your vendor issues any invoice to the client.
Coming to your requirement,
maintain shipment cost relevance @ item level, noting but you will be calculating freight at each delivery level. while creating condition record, all the deliveries will be copied in shipment cost document at item level, here you delete whatever the deliveries you dont want to capture the freight in VI01 & save it. one service entry sheet will be generated for only listed deliveries & do the invoice verification to settle the amount to the vendor.
now, try to create one more shipment cost document wrt: shipment doc, but only for the remaining deliveries. Hope you can create because shipment document has not yet been completed.
Check & revert

Mutiple Excise invoice for single GR document

Hi,
How to handle If the vendor send a multiple excise invoice for the single delivery ?
Now My client is having this problem
1. The material doument " X" contains 10 items and part 1 also captured at the time GR
2. Vendor send Two excise invoice (One for 7 items & another for 3 items)
The store person captured excise invoice for first 7 itmes via J1iex_C T.code and need to capture for remaining items but the system not allow to capture because that material document already referred to the invoice.
How to slove this issue (Excise invoice and Material document can be cancelled bcz stock has already consumed )
Thanks in advance.
Regards,
Renuga.A

Hi,
How to handle If the vendor send a multiple excise invoice for the single delivery ?
Now My client is having this problem
1. The material doument " X" contains 10 items and part 1 also captured at the time GR
2. Vendor send Two excise invoice (One for 7 items & another for 3 items)
The store person captured excise invoice for first 7 itmes via J1iex_C T.code and need to capture for remaining items but the system not allow to capture because that material document already referred to the invoice.
How to slove this issue (Excise invoice and Material document can not be cancelled bcz stock has already consumed )
Thanks in advance.
Regards,
Renuga.A

Multiple Excise Invoice for Single GRPO

Hello All
How do we create multiple excise invoices from a single GRPO document.
Thanks
Santhosh.K

Hi
As per the scenario you mentioned.
You can't create multiple Excise Invoice against Single GRPO. And as per the law of excise also there is no way to do like this.
Gate Pass made against delivery when some vendor send the item to the client. Time quantity and rate with the duties are mentioned in that.
similarly when client received the material all the above should be there in the gate pass.
Ashish Gupte

Scan multiple pages into a single PDF document?

How can i scan multiple pages into a single multipage PDF file?
I've seen similar questions posted, but I haven't found any good answers. The only advice i saw was to scan each page as a separate PDF document, then merge them into a single PDF using third-party software.
Obviously, i don't want to have to do that.
I can't believe that there really is no way to do it using the existing HP print/scan utilities provided with the hardware.
My printer/scanner is the "HP Photosmart 5514 e-All-in-One Printer - B111h", and i'm running Vista (64-bit) on an HP Pavillion notebook.
This question was solved.
View Solution.

Hi,
From the HP Scan software (Start > Programs > HP > HP Photosmart 5510 Series > HP Scan) select PDF and ensure the resolution is 300 DPI or lower.
Ensure the Show Scan Preview option is checked and click on Scan.
Once scanning the first page completes, place the next page on the glass and click the plus button below the scan preview...
Once you are done click on Save.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Multiple Partner Functions for a Sales document Item

Hi,
Can you please advise on modeling scenario for showing multiple partner functions for a given sales document in BI Report ..
Because Key figure values should not be distributed for multiple records just becos of multiple partner functions but users want to see them in the reports along with sales doc and key figure
I am explaining bit more clearly...
I can achieve above requirement by having below model ..
SDOC ITEM PF1 PF2 PF3 AMOUNT
1000 10 AB CD EF 50000
PF : Partner Function
but as I feel it is a complicated task to add more and more columns fro partner functions as and when new partner functions have been added or requested to show by users at sales doc level...
So Can you please advise a better solution to meet the same requirement.
Thanks & Regards,
BRK
Please advise me on this scenario
Thanks & Regards,
BRK
Edited by: BRK on Jul 22, 2008 9:19 AM
Edited by: BRK on Jul 22, 2008 9:29 AM

SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A1_______________$1000
80000_________10_____________A2_______________$1000
80000_________10_____________A3_______________$1000
This will be the normal display in the cube if there is only one Partner Function.
But what we need is
SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A1_______________$1000
80000_________10_____________A2_________________' '
80000_________10_____________A3_________________' '
The Amount (KF) should be populated only for the first record for a SalesDoc / Item combo.
You load data from source to the ODS, say delta.
Suppose that the below record is already available in the ODS.
SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A1_______________$1000
And you get the following data as DELTA in the Data_Package from the source.
SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A2_______________$1000
80000_________10_____________A3_______________$1000
If you populate the Amount again for these 2 records, then the total would sum to $3000, which is wrong.
So what we do is,
Write a Select stmt for ALL ENTRIES in Data_Package and fetch the records from the target ODS. Have it in an Internal table, say t_ODS1
Take the SalesDoc / Item from the Data_Package and chk if it is present in the internal table t_ODS1.
If it is present, then populate the Amount as ' ' (Blank)
Else populate the Amount as $1000.
Say, you are getting 3 new records, which is not present in the ODS1.
In that case, your internal table t_ODS1 will be blank.
Now again, we need to populate the Amount only for the first record among the 3 records.
So, here comes the "Flag".
Set the Flag as X, when we populate the Amount.
Everytime chk the Flag <> X.
Only if it is <> X, populate the Amount.
Else Leave it Balnk.
Hope I have explained in detail
Regards,
Balaji V

How to use multiple tape drive for single filesystem on single client.

Hello All.
I want to backup single filesystem with multiple tape drive.
Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
Backup client has a single backup filesystem like /data1 directory with 4 LTO6 drives.
/data1 directory doesn't have a sub-direcotry, just present a files.
If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
Please anybody answer the questions.
Thanks advanced.

See how to use multiple tape drive from single client when I want to backup single filesystem?

Retrieve Multiple Serial Numbers for given Delivery Document and Item

Hello Experts,
                      I am currently working on a 2Lis datasource to extract Delivery information.Now it is required to append the
datasource with field (say ZZSERNO) which should extract ALL Serial Numbers from OBJK table for a given Delivery Item.
I know that there is a link between table SER01 and OBJK to retrieve the same.However, my concern is- C_T_Data table is
already providing the Delivery Information and along with that I want to display ALL Serial numbers for a given Delivery Item.
A delivery Item can have more that one serial number linked to it as what I see in VL03N for a Delivery document.
So currently in RSA3, I retrieve say 1 record for a given Delivery Document and Item .Now an Item has say 10 Serial Numbers
associated with it, so i should see 10 Records for that Delivery Document and Item, after executing RSA3.
Please provide me with the CMOD logic to do so.

Hi,
You can Link LIPS and OBJK tables with Delivery and Del Item.........refer below for the code.
1) Declare an Internal table of type OBJK with fields DEL DOC, DEL ITEM and ZZSERNO .
2) Declare another Internal Table ITAB_LIPS of type LIPS with required fields say in your case *DEL DOC, DEL ITEM and ZZSERNO....etc.
3) Use below select statement to extract records from LIPS into ITAB_LIPS that you have declared for to fetch LIPS data.
Select DEL DOC, DEL ITEM ( here i have included only few fields but as per requirement please add fields here)   from
LIPS into corresponding fields of Table ITAB_LIPS.
4) write one more select statement to fetch Serial number data.
Select DEL DOC, DEL ITEM ZZSERNO from OBJK into corresponding fields of TABLE ITAB_OBJK for all entries in ITAB_LIPS
where DEL DOC = ITAB_LIPS-DEL DOC and
            DEL ITEM = ITAB_LIPS-DEL ITEM.
Loop at ITAB_OBJK.
Read table ITAB_OBJK into ITAB_LIPS with keys DEL DOC    DEL ITEM.
ITAB_LIPS-DEL DOC = ITAB_LIPS-DEL DOC
ITAB_LIPS-DEL ITEM = ITAB_OBJK-DEL ITEM.
IF SY-SUBRC = 0.
ITAB_LIPS-ZZSERNO = ITAB_OBJK-ZZSERNO.
ENDIF
ENDLOOP.
Hope the above code helps
Sujan

Multiple email addresses for single characteristics in Email Bursting

Hello Experts,
We have requirement of Bursting email to external sales representative with only their relevent data.
We have used Bex Broadcaster with email Bursting as distribution type . But the problem is we have to send out
email to multiple sales reps for a particular sales rep i.e for a particular Sales rep we have to maintain multiple
email ids of sales rep and infoObj can have only 60 chars long. So I cannot put more than one email id.
Is there any work around to overcome this difficulty.
Also I could have use individula schedule but number of schedleis very high around 200.
Thanks,

I understand you issue and I dont think It can be solved in BW as they system is not expecting the users email address to be more that 60 chars, however you could create a rule in outlook (or whatever mail application you use) to forward all emails containing this header to the other email addresses. Thats my only idea

Multiple Work Center for single internal activity ?

If more than one work center used for single internal activity how can work center be allocated ?

Hi Yogesh,
I understand that, you have a project activity in which different groups of people are working and you want to plan costs for all these groups of employees under the same project activity.
To achieve this, create different activity elements under that activity and assign specific WCs and Work duration to all these activity elements so that system will calculate aggregated costs and scheduling dates accordingly.
Hope this helps

Multiple GRN PRINTOUT for single materail document

Similar Messages

Maybe you are looking for