Multiple Inbox Issue

I run a postfix mail server on a linux system and have multiple accounts for different email (home, work, projects). Apple Mail is configured to get mail from each of these accounts on the same server using IMAP SSL / TLS. I had this system running for quite a while, but have had several upgrades on both the server and Mac sides.
Currently, I log in without an issue but one of the three main accounts will continually log in and out; the account logging in and out will change on each launch of apple mail. This is creating multiple copies of mail on the client. When checking the server logs, it appears that the client (Apple Mail) is logging in and out cleanly, it is just constant.
Are there any logs or any other way to check out what Apple Mail thinks is going on?
Second question: Is there any way to remember the server SSL certificate in Apple Mail? I do not have a root signed certificate, just a self signed.
Ian

Don’t know about the certificate.
As to the logs, apparently, you can tell Mail to provide detailed log information as described in the following article (I haven’t tried it myself):
Enable detailed Mail.app logging options
Also, Mail comes with a Turn On Logging AppleScript that I haven’t tried either, but that was discussed some time ago in the following thread:
MAIL LOG???

Similar Messages

Schedule report to multiple Inbox errors

XI R1
I've got users that need to schedule a job to goto multiple inboxes.
When the report runs it fails with this message
recipient error. no destination objects could be found (possible empty or invalid user or user group, or security restriction?):
I've tried it as a member of the Administrator group and get the error also.
Schedule on behalf of other users is Granted
Is there some other setting I need to change?

i think its a security issue, by the default installation users can not send files to each others, unless you give them the access right to do it.
go to the CMC the Administration panel, and then go to inboxes
click "Rights" and for the "Everyone" Group click "Advanced"
and give them the "Add objects to the folder "
i hope it works fine with you
good luck

Multiple OS issues with Email set up; "People" ; Synching phone not working as advertised

Nokia Lumia 822
Purchased yesterday (2/10/13)
So far I have spent 14 hours attempting to resolve what feel like endless errors and bugs. If I can;t get these resolved in the next 48 hours the phone goes back. I am so disappointed I waited especially for this phone - heard great stuff. My experience is it sucks. Worst phone ever.
1) POP3 email accounts are non functional. I have attempted to set up and delete and re-set up now multiple times. Each time presents a fresh new nightmare.
Issue 1 - Email account receives email but will not send. Error message goes something like <" Problem sending message. Message failed to send. Problem with Files or Data on your device." >
Issue 2 - Tapping email + accounts sends me back to start screen cannot even set up account
Issue 3 - I get to add email account I enter my information but no account is created
Issue 4 - I set up an account and I get an error message stating my information cannot be found.
Issue 5 - trying to open email from start screen just resets to start screen over and over and over NEVER opens the account.
These are deal breaker issues. I have multiple email accounts on different platforms. If I cannot access my various emails AND send from those accounts this is NOT the phone for me.
2) PEOPLE does not function. ALSO multiple various issues and never the same one twice.
Issue 1 - I tap on a contact and get sent to the start screen over and over and over and over again.
Issue 2 I tap on a contact and the phone freezes and wont respond unless I pull the battery
Issue 3 I open a contact and make an edit, save the contact but the change is never reflected in the list
Issue 4 I try and search for a contact and the search freezes - only option is to return to start screen
3) Scrolling thru any APP randomly takes me back to start screen.
I dread attempting to synch Outlook calendar and contacts on my PC to hotmail - especially if I can't even set up email. And it seems like even holding it will jettison me out of anything I'm doing and back to start screen.
If I can't get these issues resolved. look like I'll be going back to my 3 year old Blackberry Bold which performed flawlessly. It may not be the most impressive phone out there but it did what I needed it to do with out any issues.

Interesting Twitter conversation VZWSupport on Twitter. It was suggested to try a HARD reset - and if that doesn't work take the phone back.
Since I don;t have anything set up yet that's my solution.
I see a BlackBerry Z10 in my future

How do I view multiple inbox folders at the same time in Mail?

I want to configure Mail to show me multiple inbox folders at the same time. I want to be able to split the screen and show in the top section unread messages, then messages I've marked with label A, then messsges I've marked with label B, then everything else in my inbox (like using the multiple inbox feature in Gmail). Is this possible?

Just figured it out - I can select multiple messages as you suggested when I am not in full screen mode.
So once I come out of full screen mode - then the multiple windows open.
QED

Need info to find users who has multiple inbox i

Need a query to find out all the users who are
having multiple inbox in BoXI 3.0?

Hello Ramsudhakar,
This query works :
select SI_NAME from CI_INFOOBJECTS where SI_KIND = 'Inbox' AND SI_INBOX_USER.SI_TOTAL = 1
This one doesn't, but not sure if it's because in my sistem no Inbox object match the condition :
select SI_NAME from CI_INFOOBJECTS where SI_KIND = 'Inbox' AND SI_INBOX_USER.SI_TOTAL != 1
Hope that helped.
Samuel.

Multiple inbox support in notifications?

I'm in need of some help- just got 10.8 running on my Mac, but I'm not quite understanding how to set up multiple inbox notifications for it.
EG- I've got my regular inbox for gMal, and then I have a label set to filter out messages from certain people. Would I be able to get updates from the label and not from my regular inbox?
Thanks.

If you go into your mail preferences, you'll see your options for mail notifications. inbox only, all mailboxes VIPs and contacts in your address book. to make someone a VIP, click the star to the left of their email address in a message. Cheers!

Multiple Goods Issue documents for single delivery?

Hi
I am getting multiple goods issue documents for single delivery.
In a order there are 3 line items, and one delivery is created and 3 goods issue documents.
What is the probable reasons for this.
The requirement is for one order with n items there should be one delivery document and one goods issue document.
Inputs requested.

Since you havent put the issue in details, I have listed my guessses.
This may be happening due to mainly these three reasons. Please answer them and get back to me.
1) The three Good issue may be happeneing due to split delivery active for the item. If yes then correction should be in the Material master.
2) the availability check scheduled is set in that way. If yes please configure the availability and transfer of requirement.
3) Scheduling of the goods throught that particular shipping point. If yes then please conficgure the shipping tab in Logistic Execution.
Please let me know if the problem persists and award points if solved.
Thanks
Adi

My dv5 laptop has an internal "typing" noise/multiple security issues

I'm not sure if this is a problem, but since I've had all kinds of issues with this particular model (the first Pavilion we were sent by HP had to be returned because the engineers finally deemed it unfixable), I thought I'd ask. I'm a little nervous about a sound that makes me think of little gremlins inside the unit typing away. It's not constant, but I'm wondering if that's normal and what the noise is.
Another problem is that periodically I'll get a message about the computer having "multiple security issues". I then do a virus scan, which turns out fine, so I don't know what it means.

The Intel chipset issue is not at all related for your Notebook. Its quite unfortunate you are facing this problem as I would say its a coincidence that even your second hard drive went bad so soon.
Time for you to RMA the new hard drive.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Anyone any advice on how to stop my mail "activity" from continuously caching? is this a problem? I have had inbox issues recently that are not resolved yet but I am not sure if they are related.

Anyone any advice on how to stop my mail "activity" from continuously caching? is this a problem? I have had inbox issues recently that are not resolved yet but I am not sure if they are related.

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

Combining Multiple Inboxes

I have multiple email accounts set up on my iPhone.
Is there a way to combine all my inboxes into one?
I have always had it set that way on my Apple Mail in Leopard. It's annoying to keep moving through multiple inboxes on my iPhone. I would like it all in one place.

Not possible.
The iPhone's email client is not identical to the Mail application in this regard.
FYI - there is no setting for this with the Mail application. This is done automatically which is based on the account and associated mailbox filing structure at the Finder level.
Message was edited by: Allan Sampson

Multiple CS6 issues

Hi -
At work we recently got upgraded to CS 6 and I've encountered multiple functional issues which have slowed our workflow down considerably.
1) Drag and dropping from either the color or line swatches on the bottom of the tool bar (at right) no longer works. Dragging and dropping from the color pallet (fill or line) does not work either. In order to change color of an object we either have to create a NEW object with the new line or fill color and eye dropper it, or select the object- go to the CMYK (or RGB) sliders and enter the numerical version of the colors we want. VERY tedious.
2) for the reasons listed in #1, the gradient tool has become nearly unusable. You simply can not drag new colors into the gradient to edit it at all. The gradient tool has always been somewhat difficult to use- with CS6 it has become useless.
3) there are numerous glitchy interface issues that have cropped in- just one is the PMS swatch libraries- trying to get the library to list by name does not work periodically and the search swatch by number option randomly disappears and reappears. Recently the option to search field has disappeared completely and scrolling through the PMS swatch book constantly jumps back to the top (PMS 100 yellow) when trying to select colors. This effectively makes using the PMS swatches useless. We've had to do a work around by importing shapes filled with certain PMS colors and eye dropper them as needed. Not a great way to work as you can imagine.
Has anyone else encountered these issues and are there work arounds? We've done re-installs and that has not helped so far. Please note they are not letting us upgrade to CS Cloud version so no help there either. yay.
Thanks in advance for any help!
David

David,
Did you reinstall using the full three step way?
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Multiple iPhone Issues

Hello,
I have been having multiple iPhone issues after updating my phone to iOS 6.1 and restoring it my phone number is grayed out on Facetime and iMessage in Settings and sometimes when I go to the app store the old app store design loads that was in iOS 5 and the search and updates and buttons below get reaaranged
It looks like that in messages and Facetime
NOTICE THAT THE EMAILS AND NUMBER ARED EDITED!
Please help me fix this issue

have you tried turning off imessage in settings and then turning it back on again to re-activate? have you tried resetting the phone by holding the sleep/wake button and the home button until the phone restarts?

Multiple freeze issues on my laptop

Hello.
I'm experiencing multiple freeze issues lately. Inspecting all logs available but found nothing.
1. sometimes gdm freezes while switching users in Gnome 3. I share my laptop with my wife, separate accounts. While switching from one user to another, somethimes gdm (screen with account names) hangs, in situations when both users are logged or one is not. Only thing that helps is to switch to console, log in and restart gdm.
2. I had issues with suspend, so I turned off suspend based on inactivity. Now sometimes when laptop has some idle time and is inactive, screen turns off. Then it hands, all leds are on, unable to wake (turn on display), nothing works, switching to console, nothing.
3. Total freeze while logging into Gnome 3 session of my wife. Black screen, all leds on, only hard turn off (long press power button).
I inspected all logs in /var/log, also .xsession-errors in both home folders of both users. Can't find anything .... I'm desperate. Please post some tips, how to log more. I can't even submit or search for some bugs as I can't determine even what is the cause.
My laptop is ASUS X50Z.
lspci:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Packages installed -> http://pastebin.com/efUsSdr4
I will gladly post more info.

lsmod:
Module Size Used by
fuse 66858 2
ipv6 288122 24
ext3 191948 1
jbd 63179 1 ext3
uvcvideo 64995 0
videodev 85100 1 uvcvideo
media 10565 2 uvcvideo,videodev
v4l2_compat_ioctl32 8644 1 videodev
cryptd 8309 0
aes_x86_64 7508 2
aes_generic 26138 1 aes_x86_64
ecb 2073 1
btusb 11385 0
joydev 9895 0
bluetooth 150884 1 btusb
arc4 1410 2
ath9k 86553 0
radeon 994864 3
mac80211 221931 1 ath9k
ttm 54872 1 radeon
drm_kms_helper 25721 1 radeon
serio_raw 4294 0
i2c_piix4 8224 0
psmouse 55501 0
snd_hda_codec_realtek 282216 1
ath9k_common 1858 1 ath9k
drm 185736 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 5199 1 radeon
i2c_core 20460 6 videodev,radeon,drm_kms_helper,i2c_piix4,drm,i2c_algo_bit
pcspkr 1819 0
asus_laptop 14098 0
sr_mod 14951 0
ath9k_hw 304895 2 ath9k,ath9k_common
ath 14770 2 ath9k,ath9k_hw
cdrom 36553 1 sr_mod
r8169 45411 0
evdev 9530 10
cfg80211 165636 3 ath9k,mac80211,ath
sparse_keymap 3120 1 asus_laptop
k10temp 2883 0
processor 24224 0
thermal 7799 0
button 4470 0
ac 2344 0
video 11164 0
battery 6453 0
snd_hda_intel 22410 2
snd_hda_codec 80889 2 snd_hda_codec_realtek,snd_hda_intel
sp5100_tco 4568 0
shpchp 26281 0
mii 4059 1 r8169
pci_hotplug 25454 1 shpchp
snd_hwdep 6357 1 snd_hda_codec
snd_pcm 74368 2 snd_hda_intel,snd_hda_codec
rfkill 15498 4 bluetooth,asus_laptop,cfg80211
snd_timer 19544 1 snd_pcm
snd 58362 10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6210 1 snd
snd_page_alloc 7153 2 snd_hda_intel,snd_pcm
vboxdrv 1790690 0
ext4 375413 2
mbcache 5881 2 ext3,ext4
jbd2 70667 1 ext4
crc16 1359 2 bluetooth,ext4
sd_mod 28275 3
usbhid 35352 0
pata_acpi 3376 0
hid 82435 1 usbhid
ohci_hcd 21714 0
pata_atiixp 3928 0
ahci 20005 2
libahci 19559 1 ahci
libata 166724 4 pata_acpi,pata_atiixp,ahci,libahci
ehci_hcd 40794 0
usbcore 144144 6 uvcvideo,btusb,usbhid,ohci_hcd,ehci_hcd
scsi_mod 132794 3 sr_mod,sd_mod,libata
dm_mod 69692 12
/etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Bratislava"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(dm-mod vboxdrv)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="yes"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="gorgoroth"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng netfs crond dbus gdm networkmanager @dropboxd sshd cupsd)

Z77A-GD65 Multiple BIOS Issues - B4 Hang, Splash Screen Blinking

Back in November 2012, I built a home server with a Z77A-GD65. Lately, I've noticed some strange things happening that I've been trying to research but to no avail.
First off, I get the B4 code hang-up whenever I'm booting. This doesn't matter if it's a cold boot or a reboot, it hangs on B4 for about 10-15 seconds, flashes 92 really quick, and then goes to A2 which it stays for another 5 or so seconds. After that I get the MSI splash screen for about 1 second, then it blinks 5 times. After that it goes into Windows just fine.
The blinking is a new issue, the B4 hang is not. I've read from multiple posts that this is a USB issue. When I disable USB legacy support, the issue goes away, but of course then I can't have legacy support. I have yet to figure out what exact device is causing it. In the process of trying to figure this out, I updated BIOS to A.A0. After updating to this version of BIOS the splash screen blinks 5 times before going to the "Starting Windows" splash screen. This is a more difficult issue to figure out why it's doing this because if you search for "BIOS" and "flash" or "flashes" or "flashing", you typically get results for flashing your BIOS. Hence, why I'm using the term "blinking". But even then I can't really find a solution out there.
I also happened to see that the website for the Z77A-GD65 is showing a newer BIOS version, but I'm unable to flash this (at least using M-Flash). I threw it on a USB, re-enabled USB legacy and whenever I click on it to install, the BIOS screen hard locks. The screen just freezes exactly where it's at in the BIOS and the mouse is dead. However, I can CTRL+ALT+DEL on the keyboard and it will reboot the system so I don't need to power cycle the computer. Not sure why this is happening either. Perhaps I need to flash this a different way? Maybe I don't need to flash this at all?
I could really use some input here on why this is happening.
As for the specs on my system, they're as follows:
i7-3770K overclocked to 4.2 Ghz by using the Turbo Mode in BIOS
32GB Komputerbay DDR3 PC3-12800 1600MHz DIMM with Low Profile Blue Heatspreaders Quad Channel RAM | 9-9-9-24 XMP ready
AMD PowerColor 7870 Myst Edition GPU - currently not overclocked although overclocking this doesn't seem to affect any issues
2 - 128 GB Corsair SATA III SSD - one runs the OS, the other I use to load games from
2 - 500 GB Seagate Barracuda 7200 RPM Sata II HDD's mirrored via Windows 7
1 - 750 GB Seagate Barracude 7200 RPM Sata II HDD
1 - 1 TB Western Digital MyBook USB 2.0 external
2 - 3 TB Seagate USB 3.0 external
ASUS DVD Burner - not sure which one, it's a cheapy $20 from Newegg
1 - PCI USB 3.0 expansion card
Antec TruePower New TP-550 Modular 550W Continuous Power ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS BRONZE Certified Active PFC "compatible with Core i7/Core i5" Power Supply
NZXT Switch 810 gunmetal - currently have 4 fans running but plan on more, also the Switch 810 has the multi-card reader in the front with 1x SD Card, 2x USB 2.0, 2x USB 3.0
for peripherals
1 - Microsoft 360 Wireless controller adapter (legit one, not the knockoff although I had a knockoff prior to getting the real deal)
1 - Logitech Wireless USB Keyboard with Touchpad
I tried to be thorough. Thanks in advance for any help!

Quote from: PirateDog on 26-August-13, 12:45:18
Probably a USB device problem.
This is a candidate, as well as mouse and keyboard. Disconnect USB devices one at a time to find the culprit.
A lot of devices running. PSU a +12V single rail or is it multi rail? A rail going to the graphics or components may not be enough amps. My best guess is the card reader.
For UEFI/BIOS flashing, select your mainboard here and use the forum flash method;
I'll definitely try unplugging some of these USB devices to see if that helps with the B4 hang issue.
As for the PSU, according to the description for it on Newegg: "Four industry-leading independent +12v rails are provided for more stable and safer power output." It has two rails going to the GPU. The GPU is a new addition to the system and so I wasn't running it until recently. The issues were occurring beforehand, but you're right that this PSU is underpowered for the rig considering PowerColor recommends a minimum of 500w. I'm going to be buying a larger capacity one sometime in the very near future. Any recommendations on good modular PSU's? What's a good way to tell what wattage to get?
Thanks for letting me know about the forum flash method. I'll be back later when I have some results.

Multiple Version Issue. data not matching

Dear all,
pleas help me in this issue..
we have the Apo (DP) Cube. we are running the reports on this cube..
when we run the query we are giving the Verion ( means week) in the selections.. data is coming but.not matching with Apo..data..
we assumed that data is coming more. beacuse it might taking the data of previous year also.
so we included the Calyear and aksed user to selct both, vesrion as well as year.. because their req is for multiple version with historical data.
They want to see the data for multiple versions with historical data... even though data is not matching..
what we had done is again deleting all the data from Cube and dso an datasource , again loading... this time we asked user to run the report and match it the data is matching.. with vesrion
But when we go for historical data with mutiple version. its not matching ,
pleas help me out where to find out this probelm , what could be the cause ,.
how to chek
Awaiting your valuble fedback. its an uregnt issue.
if any thing else required pls let me know

Txs for your valuble reply..
We had checked that .
but when we unload and again loaded data this time it is matching on giving the version...
Where as in case of Multiplr versions . data is coming more.. donno wheather it is mixing up the duplicate data . or what not able to underand.
can you pls tell me steps how to analyse with your patiency...
Where and all we need to chek ....
Awaiting Your reply.

Multiple Inbox Issue

Similar Messages

Maybe you are looking for