Multiple installations of XI 3.0 on the same Windows server

Hi,
is it possible to have multiple instances of XI 3.0 installed on the same Windows server? I know that I can create seperate database users for the repositories and that I can have different ports configured for CMS. I'm concerned about the registry and whether a second installation would overwrite the registry for the first installation or if there are anyother show stoppers.
Thanks,
Matt

Not yet, I know our product group is looking at this but currently only 1 per windows server. They are now supporting XI3 on top of XIR2 or other products known as side by side install. I don't have any type of ETA and wouldn't expect it soon.
Regards,
Tim

Similar Messages

Can we install Oracle 8i and 10g on the same windows server?

I would like to install the Oracle server 8i and 10g on the same windows server? Is this possible.
Forgive me if this question is already asked.
Thanks in advance!
Jay.

WHICH Windows version? (There's more than one). It would be useful to be a little bit more precise (NT,2000,XP,2003, 32/64 bit) .
For NT and 2000 it is possible to have both 8i and 10g, for XP and 2003 there's no support for 8i at all.

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Can we with ligthroom have the sofware set up on multiples computer mac and mc and share the same dat base library?

can we with ligthroom have the sofware set up on multiples computer mac and mc and share the same dat base library?

No, a Lightroom catalog cannot be on a networked drive, and can only be accessed by a single user at a time.

Multiple ALV Grids on the same window.

Hi,
Can someone tell me if it's possible to display multiple ALV grids on the same window.If so how is it done.Please note that I am talking about Grid Display and not List Display.
Regards,
Swathi Balakrishnan

Hi,
This can be done even i have done a report.
Its very simple create three containers as below.
Just repeat three times if u need to create three containers.
See this sample code using custom container.
START-OF-SELECTION.
Begin of process logic
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
 text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS01'.
SET TITLEBAR 'SALESTTL'.
A L V G R I D
IF o_grid_container IS INITIAL.
 CREATE OBJECT o_grid_container
 EXPORTING
 container_name = 'CCONTAINER1'.
 CREATE OBJECT o_grid
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid_container.
FOR first A L V G R I D
 PERFORM set_grid_field_catalog
 CHANGING i_grid_fcat.
 PERFORM modify_grid_fcat_predisplay
 CHANGING i_grid_fcat.
 PERFORM set_grid_layout_set
 CHANGING struct_grid_lset.
 PERFORM sort_outtable CHANGING i_sort_fcat.
PERFORM populate_grid_data TABLES i_grid_outs i_grid_outs_pro.
 SORT i_grid_outs BY year month.
 CALL METHOD o_grid->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid_lset
 CHANGING
 it_outtab = i_grid_outs[]
 it_fieldcatalog = i_grid_fcat[]
 it_sort = i_sort_fcat. " Period
ENDIF.
IF o_grid1_container IS INITIAL.
 CREATE OBJECT o_grid1_container
 EXPORTING
 container_name = 'CCONTAINER2'.
 CREATE OBJECT o_grid1
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid1_container.
* FOR SECOND ALV GRID
 PERFORM set_grid1_field_catalog
 CHANGING i_grid1_fcat.
 PERFORM modify_grid1_fcat_predisplay
 CHANGING i_grid1_fcat.
 PERFORM set_grid1_layout_set
 CHANGING struct_grid1_lset.
 PERFORM sort_outtable1 CHANGING i_sort_fcat1.
PERFORM populate_grid1_data TABLES i_grid1_outs i_grid1_outs_pro.
 SORT i_grid1_outs BY year month.
 CALL METHOD o_grid1->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid1_lset
 CHANGING
 it_outtab = i_grid1_outs[]
 it_fieldcatalog = i_grid1_fcat[]
 it_sort = i_sort_fcat1. " Period
ENDIF.
IF o_grid2_container IS INITIAL.
 CREATE OBJECT o_grid2_container
 EXPORTING
 container_name = 'CCONTAINER3'.
 CREATE OBJECT o_grid2
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid2_container.
FOR THIRD ALV GRID
 PERFORM set_grid2_field_catalog
 CHANGING i_grid2_fcat.
 PERFORM modify_grid2_fcat_predisplay
 CHANGING i_grid2_fcat.
 PERFORM set_grid2_layout_set
 CHANGING struct_grid2_lset.
PERFORM populate_grid2_data TABLES i_grid2_outs i_grid2_outs_pro.
 SORT i_grid2_outs BY year month.
 PERFORM sort_outtable2 CHANGING i_sort_fcat2.
 CALL METHOD o_grid2->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid2_lset
 CHANGING
 it_outtab = i_grid2_outs[]
 it_fieldcatalog = i_grid2_fcat[]
 it_sort = i_sort_fcat2. " Period
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE user_command_0100 INPUT.
As the events are registered as application events, control is first
passed to the program's PAI. The call 'cl_gui_cfw=>dispatch' will
forward control to ABAP object event handling and the appropriate
event handler will be called (if present). This allows the user to
selectively process events.
DATA: i_return_code TYPE i .
CALL METHOD cl_gui_cfw=>dispatch
 IMPORTING return_code = i_return_code.
save_ok = ok_code.
CASE save_ok.
 WHEN 'BACK' OR 'END' OR 'CANC'.
 PERFORM exit_program.
ENDCASE.
CLEAR save_ok.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form EXIT_PROGRAM
 text
FORM exit_program.
CALL METHOD o_grid_container->free.
CALL METHOD o_grid1_container->free.
CALL METHOD o_grid2_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
 Error in FLush
ENDIF.
LEAVE TO SCREEN 0.
ENDFORM. " EXIT_PROGRAM
If u want get more idea revert back to me.
Thanks & Regards,
Judith.

I use a gmail account for my mail. When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file. help

I use a gmail account for my mail. When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file. help

Did you check your user name and password in Settings>Mail,Contacts,Calendars...tap your email account, tap SMTP, then tap the primary server name. Make sure the settings there are correct.

I have two macs at my house, and multiple iPhones. I want to keep the same apple id as everyone else, but i want to put my own music only on my iPhone. I want to do this with my laptop which is not the family's main iTune's computer.

I have two macs at my house, and multiple iPhones. I want to keep the same apple id as everyone else, but i want to put my own music only on my iPhone. I want to do this with my laptop which is not the family's main iTune's computer.

If you use the same Apple ID for iCloud on each device, yes. However, you can use the same Apple ID for iTunes content on each device, but different Apple ID's for iCloud, iMessage, FaceTime, etc., on each device. That way, you can have whatever iTunes content you want on each phone, but keep all of the other data separate. You can create another Apple ID here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
Must be a verified email address.

Can you run multiple APEX listeners for different instances on the same server

Please confirm that we can run multiple APEX listeners for different instances on the same server? Is it an xml setup configuration or do we need to do more??
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Yes.. Just exactly what I was looking for...
Thanks Jari!!
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Multiple domains and multiple IPs in the same MacMini Server

I am sure that this topic has been faced already but I cannot find enough information to really dig into a solution.
I have a macmini server with two IPs let say x.x.x.12 and x.x.x.13 .
The server is set up on the first IP. It has his primary zone, machine record, mail aslias and www alias.
Lets call the server domain server.domain1.com
Everything works fine I have a couple of local users and a couple of LDAP users. Just to test the machine setup.
I can send and receive emails using any of the users as [email protected]
Now I would like to have another domain, domain2.com in the same server .
The final goal is to have users under different domains. They have their own email box, calendar, etc.
It will be preferable that I can share the same username with different domains. But I can live without that option.
My first test was to have the second domain called server.domain2.com using the second IP. x.x.x.13 .
For that I created another Primary Zone with domain2.com as machine record of x.x.x.13 . To use the second IP I simply create another Ethernet interface on the macmini.
In the Mail -> Advance settings I added the host aliases as well as virtual hosting domains for domains2.com.
With this setting I can send emails as [email protected] or [email protected] but when I replay to their messages I get a "Relay access denied" error from server.domain1.com .
I also tryed another domain pointing to x.x.x.12, the same as server.domain1.com . I did not create any extra Primary Zone but the local host aliases and the virtual hosting domains.
Same issue. I can send but I get a "Relay access " error.
As you might notice I am a novice on servers settings. I just try to recreate a similar environment common to Virtual Hosting providers for my own website playground but I cannot cut through this email configuration obstacle.
Any significant meaning that can be leading me to learn how to do it will be very very appreciated . (beside lynda,com tutorials that I followed already but do not mention multiple domains for mails).
Thanks

the problem I try to solve is to manage multiple domains in one MacMini Server.
Having two IPs is secondary.
I would like that each domains has his own users with emails, iCals, Wiki and web sites.
The main problem is having emails to work for any additional domain beside the default one on the machine IP.
I also got an additional IP address to be used on the same server hoping that it make things easier but apparently is making things more difficult.

Can multiple PCs access one remote panel at the same time?

I've written a program in labview 7.1 to monitor/control a labview application running in the test cell through Remote Panel. I and my coworker can remotely monitor and/or control this labview application individually. But if my coworker has the remote panel displayed on his PC and I try to get the remote panel on my PC, I get a labview error (63) as below:
"LabVIEW: Serial port receive buffer overflow.
LabVIEW: The network connection was refused by the server."
My question is: Can multiple PCs access one remote panel at the same time?
Thanks in advance!
Y

Sorry I wasn't clear. The remote panel license is separate from the number of LabVIEW development licenses. Pricing information on remote panel licenses can be found here.

I have multiple accounts using the same smtp server, I can only reply with one as the settings wont allow me 2 servers

I have tried to set my email to reply from my iphone 5 both of which use the same SMTP server. I can't change the settings on the others as it will only allow one mail account. Can I add multiple with the same smtp?

I Am not using gmail I use seperate company for my mails both use the same smtp server. The problem is when I set my first account it them uses these details and passwords when I create the second account saying that the smtp server is already in use by the primary account. I therefor can't set the password.

How do I display multiple pdf documents in the same window?

I am sure that this question has been asked many times before, but I have searched the forums and the online help documentation for nearly 45 minutes without a satisfactory answer.
I have just installed the trial version of acrobat pro and I want to open multiple documents in the same window but I can't seem to find out how to do it.
Can someone tell me how?
Thanks

This is the worst thing to happen to acrobat, in my opinion.
The clutter that it creates on my computer and the fact that i cant even see the document title when I have a bunch of them open (because the task bar is too full) is unacceptable.
I never would have changed from Acrobat 8 if I had known, and now I cant switch back (company license).
The latest thing i can find about addressing it is here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb405108&sliceId=1
which was in november 2008....
why hasnt any thing else been done about it? I just spent 45 minutes being sent to different departments over the phone, only to be told to submit a feature request.
Please do this if you havent already:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Passing multiple parameters between two report portlets on the same page

Hi,
I want to pass multiple parameters between two report portlets on the same page.
I have been succussful passing a single parameter between two portlets. The
following are the steps :
(1) Created first report based on the query
SELECT htf.anchor('http://192.168.0.84:7778/servlet/page?&_pageid=97&_dad=portal30&_schema=portal30&_mode=3&dept_code='||DEPTNO,DEPTNO) Department, ename FROM EMP;
(2) Created 2nd report
select * from EMP where DEPTNO = :dept_code
(3) Added pl/sql code before display page on the 2nd report
portal30.wwv_name_value.replace_value(
l_arg_names, l_arg_values,
p_reference_path||'.dept_code',portal30.wwv_standard_util.string_to_table2(nvl(g
et_value('dept_code'),10)));
(4) Created a page and added these reports as portlets.
Sofar it works fine for one parameter (deptno) . Now I want to add one more
parameter say empno to my first report query and would like to pass both the
parameters deptno and empno to the 2nd report. Please tell me how to pass multiple parameters ?
Thanks
Asim

Hi,
You will have to do the same thing
The select will be like this
SELECT htf.anchor('http://toolsweb.us.oracle.com:2000/servlet/page?_pageid=97&_dad=mb&_schema=mybugs&_mode=3&dept_code='||DEPTNO||'&empno='||empno,DEPTNO) Department,ename
FROM EMP
In the additional plsql code do the same for empno like this
mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.dept_code',mybugs.wwv_standard_util.string_to_table2(nvl(get_value('dept_code'),10)));
mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.empno',mybugs.wwv_standard_util.string_to_table2(get_value('empno')));
Thanks,
Sharmila

Send Port to internally hosted IIS web service needs to run on the SAME IIS SERVER from multiple orchestrations

Hi
We have a multi-server BizTalk environment. We have an Orchestration with multiple call orchestrations in it. Each called orchestration is calling a web service through a 2 way Send Port (which is hosted in IIS on each BizTalk server in our multi server
environment). We have to ensure that each called orchestration is calling these web services on the same IIS server.
I could create a dedicated host instance that the Send Port runs under to run only on one server but then this means that all our DBase traffic is happening on one server. We also thought about using the load balancer some how to achieve this through sticky
sessions etc.
This is all necessary because we are using Entity Framework exposed through web services and we need to manage transactions.
Any ideas on how we may achieve this. I have inserted a picture to try and show the scenario
Biztalk Developer

Haha, Entity Framework strikes again! But seriously, that is a rather odd architectural requirement, double check first. But anyway...
Try this: Configure the Send Port URI to point to something like http://localservicehost/[yourEFService]
Then in the local hosts file (the DNS/IP hosts file), define localservicehost to the local IP address where the service is listening.
That way, the connection will always be made to the local machine. Essentially the same as localhost.

Can I connect multiple bluetooth headsets to my iPod at the same time?

Can I connect multiple bluetooth headsets to my iPod at the same time?

After 1 or 2 reboot system I managed was enter my MacBook Pro my AppleID and it is connected I managed so to have the flow of "Stream Photo" from my iPhone 4 S to my iPad 2 on the MacBook. But incomprehensible how the function "find my Mac" not recognize the MacBook Pro in "iCloud.com" or App in the iPhone 4 / iPad 2. Thus I do little "see the iMac, iPhone 4 and my iPad 2" and not the Macbook Pro !?!
I am sorry about my English quality but I'm not English speaking this text is translated by Microsoft Translator.

Multiple installations of XI 3.0 on the same Windows server

Similar Messages

Maybe you are looking for