Multiple Interactive reports per page requirement

Hi,
I've a requirement to create multiple reports say 4 reports on the same page but in different regions.Each and every report has some search and filter criterion so I thought of using Interactive reporting but while creating second one I'm getting error "one intercative report per page is allowed".Is there any workaround method to make this work or I need to use classic report with search fields only?
Thanks,
Mahender.

Hi Jari,
Thanks for your reply,
I tried that it works fine but one problem.I've created four individual reports on four pages and while using this IFRAME logic displaying on fifth page,there I can display all reports but report titles(page titles) are missing like which ever report I display on top is fine with title(comes from corresponding page title) but remaining reports titles are missing or truncated.is there any other way to create and display report titles?
Thanks,
Mahender.
Edited by: user518071 on Sep 21, 2009 8:19 AM

Similar Messages

Multiple Interactive reports per page

Hello,
Standard APEX 32 behavior prevents multiple interactive report in a single page.
Is there a way around this limitation?
How can I display multiple interactive report in a page.
Thanks
R

Hi,
This might help also
http://djmein.blogspot.com/2008/03/multiple-interactive-reports-on-one.html
Br,Jari

Multiple Interactive Reports

.Hi,
Can't we add multiple interactive report based on conditional display i tryed doing I get error saying only one report per page. please suggest me is there any way we can add multiple reports.
Please suggest.
Thanks
Sudhir

Hello Sudhir,
I don't know if it still works in last version.
I am using ApEx version 3.1.2.00.02 .
And there you can create a second interactive report by copying the region of the first one.
Change the SQL-query on the region definition page.
Check the settings made for the interactive report (column order, display etc.).
VERY IMPORTANT: the display conditions have to be disjunct.
You can not display both reports simultaneously.
Regards, Tine.

Multiple interactive reports/tab. forms: future or everlasting expectation?

At the end of September, the statement of direction for APEX is updated for 4.2.
I notice that there's not a word anymore about the possibility to use multiple interactive reports and tabular forms on one page (declarative, without the tricks described in so many blogs and forums).
Does this mean that it will never be possible or just not yet in 4.2?
Thanks in advance for any enlightening comment about this :-)
Regards,
Bart

Bart, Joe,
Thanks for bringing this enhancement request up again. Allowing for multiple tabular forms or multiple interactive reports on one page is still a feature that we’re considering for a future release of Oracle Application Express. But we honestly don’t know yet whether this is going to make it into APEX 4.2 or a later release. And yes, there’s certainly a chance that this may proof to be too disruptive to the current implementation, and thus require a different approach. I realize this isn’t the answer you were looking for, but all we can say that we’re still actively looking into making this possible as a standard feature.
Regards,
Marc

Multiple Interactive reports on a page

Hi,
I have a requirement of drilldown pages depending on which chart user clicks on main page. I have 4 different charts on main page
Depending on which chart user clicks on main page, it should display corresponding <b>IR</b> in Tab 2.
Is this possible in apex? I am new apex and trying to figure things out. I created a chart and it drills to IR on Tab2. I made this report region on Tab 2 conditional based on parameter from main page. Now when I try to add new region to create another IR, it doesn't allow me.
I found an example that uses IFRAME to display multiple IRs on same page. But my req. is to display only ONE IR at a given point of time on a page (depending on which chart user clicks, should run appropriote the sql query)
to keep it simple, I need multiple conditional IR's on same page (Tab). Please let me know if this possible or not.
Please help me. Thanks in advance

If you only need to display one IR at a time, there is a trick you can do to get them all on the one page.
Create the IR on another page, and then copy the IR to the page you want it on. But you still will only be able to have one shown at a time (which is acheived by creating conditional display to make sure only one will be displayed). Not sure if you can still do this in Apex 4, but it worked in 3.x.
Ta,
Trent

Interactive Reports - First Page / Last Page Navigation

Hi,
I've been trying to implement the First Page / Last Page navigation on my interactive reports using the solution provided by Jari in the following thread:
Column Alignment / Pagination in Interactive Reports
My question is how do I calculate the report max rows to set the value of P1_MAX_ROWS per the following statement:
'I have hidden item P1_MAX_ROWS where I count report max rows using Before Header Computation.'
Thanks for the help,
Mary

Would you mind explaining this a little further, Jari?
Do I have to determine the IR filter (via the APEX_APPLICATION_PAGE_IR_COND view) in order to create the SQL to calculate the max row count ? Or is it much simpler than that?
Thanks,
Mary
Edited by: M L on Aug 4, 2010 5:30 PM

Custom pagination for APEX 4.2 interactive report using Page Zero

Hi,
I want to implement an «Custom pagination for APEX 4.2 interactive report» using a «page zero».
I recently migrate from Apex 3.1 to Apex 4.2 and my «Custom pagination for APEX 3.1 interactive report» using a «page zero» is not working any more.
So now I try to adapt an excellent example of Jari Laine for 4.0 but using a page zero.
I put the code JavaScript to Page zero but I must create an dynamic action to fire only for an interactive report region.
It’s a good idea?
Thank you

Thought I would try once more with my DatePicker question.
On the Apex.Oracle.Com website I have created a 1 page application that has an Interactive Report.
[url http://apex.oracle.com/pls/apex/f?p=15655:1]
user = 'test'
password = 'test'
I have 2 questions :
(1) In IE7, press 'Actions', 'Filter'. On the Column dropdown list, select 'Order Timestamp'.
Notice the prompt icon to the right of the 'expression'. This should change to the Datepicker, but in IE7 it does not. Try the samething in Firefox or Chrome and the Datepicker will appear.
Is this a BUG, or does Apex 4.02 not support IE7 ?
(2) In Firefox or Chrome, where you can now see the Datepicker, you will notice that it is the new style picker, not the old style ( called 'classic' ). I want to change it so that it shows the 'classic' datepicker not the new, but cannot see how to do it, if indeed you actually can.
I would really appreciate it if someone could take a look and let me know if I am going mad, or if we need to get all our users onto IE8. We have now gone live with Apex 4.02 and need to resolve these issues.
Thanks in advance.
Edited by: DooRon on 10-Mar-2011 05:13

Smartforms + multiple barcode labels per page

Hi ,
There is requirement that 8 barcode labels should be printed per page ( 2 lables per row, 2 columns, size 1inch / 4 inch).
In SAP script , we create 8 main windows and insert the lable in 1st main window. at run time automatically it will go to next mail window.
Could you please any body tell me how to acheive the similar scenorio in smartform.
Thanks and Regards,
Pavan Meda

Create a template
in your template create
a line type with 2 coloumns and 4 rows
and in those text elements place your
barcode information as you do in scripts.
Thanks,
Phani.

Smaple code for multiple interactive reports

hi experts,
Pls send me a sample code or link for creating muiltiple interactive reports.

Hi
See the sample programs for interactive lists
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Reward points if useful
Regards
Anji

HELP: Multiple Consecutive Numbering per Page - Multiple Pages

I am working with an 8.5" x 11" InDesign document that has eight 4.25" x 2.75" "coupons" per page - see sample below.
Each coupon will need to be automatically and consecutively numbered 00001-00008 on page 1, 00009-00016 on page 2, etc. prior to printing and cutting into eight individual coupons. I know I can do this manually, but I would rather not since there may end up being dozens of pages.
My questions...
- Is this possible?
- If so, how can this be done using InDesign?
I appreciate any help!

There may be a better way to do this but this will work:
1. Set up your doc as a single page (unselect facing pages)
2. Go to the master page and place your coupons.
3. Create 2 columns and adjust your margins and gutter so the columns are the width of the text containing your numbers and in the exact postion. - These columns and margins will be un-usual looking.
4. Using 6 sets of sample numbers with a return at the end on each one, set 3 in one column and 3 with the 2 frames threaded.
5. Create a para style and adjust the space after each paragraph so the text in each column lands on the right spot on each coupon
You doc should be set up. Delete text and go to first page
6. In Excel or similar create a column (not row) with numbers you need and copy
7. Place text in first column on P1, select all the text (Ctr/Cmd A) and apply paragraph style you created - the 3 numbers should be in correct position
8. Click on red + sign, and, holding down Shift, thread remaining text into 2nd column - the text will flow into that column and create all the extra pages for the rest of yur numbers .
Brian

Printing multiple zoomed slides per page

I'm having trouble configuring Adobe Reader's print settings. I want to print 2 slides per page at 130% zoom for each. I can currently print a page zoomed in at 130% and print 2 slides per page, but I can't do both at the same time.
David

Okay, I just struggled for a good 45 minutes until I finally figured it out. Here it is, step by step.
-Go to print and hit the little box with the arrow facing up to display the additional screen
-While in the "keynote" section on the drop-down box, select "Individual Slides"
-Click on the "layout" and select how many "pages per sheet" you would like (I believe both 6 and 9 are an option, and I think you'd want the first option
-Go back to the "keynote" section and select that would want all the slides printed, and you should be good to go! I just did it exactly how I described it and I also have iWork '09
Hope I helped!
I actually just thought of something. If you're doing what I described above and it's still not working, when you're on the keynote part and under the printer name it says "pages: all or from _ to _", trying putting in from slides 1 to (however many you have) and try it that way.
Message was edited by: fashion.monica

Tree structure in an interactive report

Hi All,
I hope someone can suggest a solution. I have 2 tables that I am trying to join in an interactive report and have a tree like structure. The table are set up like the following:
Table tools - TOOL_ID, TOOL_NAME, TOOL_DESCRIPTION
Each tool can be connected to many parts:
Tool to Parts table - PART_ID, TOOL_ID
Ideally the report that I want will show the tools data with the functionality to drill down to display the parts that are associated with that tool.
I could create another report region on the page to pass the tool_id to as a parameter and display the tool_to_part data based on that but then I will lose the functionality that comes with the interactive report (only one interactive report per page). A tree region wont give me the functionality that comes with an interactive report either allowing me perform searches on etc.
The report that I would like would something like:
+Tool ID    Tool Name
    Part A
    Part B
    Part C
where the parts data can be collapsed with the '+'
I am using APEX v4.0
Thanks
Chris

Hi Chris,
You can place a detail report inline with your master TOOL report, using an iframe. I've once made a small setup for this, perhaps it's of help to you:
http://vincentdeelen.blogspot.com/2013/07/detail-section-in-line-with-report-part.html
Regards,
Vincent

Question - Resetting Interactive Reports on Different Pages

Hi,
I currently have 5 pages, each with an Interactive Report. Page 1 contains column links with filters to the other 4 pages.
Once a user has clicked a column link with the relevant column filtered on the Interactive Report on the other page, the only way I can see for the user to reset each Interactive Report is to manually reset the report on each page.
Is there any way to perform the "RIR" or "CIR" clear cache setting on all the Interactive reports for a delimited list of pages via one button click?
Thanks in advance,
- Stuart

Hi Simon,
The scenario could be that the user clicks on 3 different column links on page 1 and the Interactive Reports on those linked pages are filtered. The user is happy with the information and decides that he/she wants to look for completely different data within the Interactive Report on page 2 (3 or4).
When they go to that page, it is still filtered based on the column link. To reset the report, they need to manually select Reset from IR menu. This would need to be done for each of the other pages with previously filtered reports.
The Reset I am looking to perform is almost like when each page is visited. It would be similar to performing a clear page cache on multiple pages and you pass the page number as a parameter from one button click using a PL/SQL block. i.e.
BEGIN
APEX_UTIL.CLEAR_PAGE_CACHE('1');
APEX_UTIL.CLEAR_PAGE_CACHE('2');
APEX_UTIL.CLEAR_PAGE_CACHE('3');
END
Ideally, if there was some way to do something similar for all or specific Interactive reports then it would reduce the number of clicks made by the user.
The application is to be aimed at users, who need to get information with as few clicks as possible.
- Stuart

Display more than one interactive report on a page

Hi,
is it possible to display more than one interactive report on a page.
Thanks for any idea
Norbert

You can't display two on one page, but it is possible to have multiple conditional interactive reports. See Duncs most excellent blog:
http://djmein.blogspot.com/2008/03/multiple-interactive-reports-on-one.html
This is probably an unsupported approach.
Cheers
Shunt

Can I link from Interactive report Page 1 to Master Detail page 2?

Hi folks-
I know how to create a Page as an Interactive Report; it creates 2 pages automatically (primary page with the great interactive bar) and a 2nd page that's a single record.
I know how to create a Page as Master Detail, whereby I get a tabular list without the super interactive bar, and I can select a record, and get transported to a nice page with 2 regions (master on top, detail on bottom).
I want to have the First page from the Interactive Report, select the record, and go to the 2nd page of a MasterDetail.
Do I create the Interactive Report, and customize the 2nd page, to add a region?
Or, do I create both page types, and redirect from the 1st page of the Interactive Report to the DML Form from the MD report? I tried that, re-assigning the link from the Interactive Report to be a Link to Custom Target, and specify the page # of the Master-Detail page. And it is taking me to the right page, but the data from the selected row is not coming with me, and the detail in the bottom region is not appearing at all.
Can someone please give me a nudge as to the sequence I should be doing?
(As you can tell, I'm new to Apex.... I'm trying to use it to create a prototype or proof-of-concept for a database driven web application)
Thank you
Marion

Yes, I tried that after I wrote to you - and it's fine, but not what I'm after; it's only based on 1 table and I'm working with 2 tables.
Perhaps I can explain in better.
I want one page as an interactive tabular report (of the master records)
I want to select a row, and transfer to a page that has the corresponding row on top (as a form), and a tabular region below of records from a related detail table.
ie, I want page 1 from the Interactive Report, and page 2 of the Master Detail report.
OK - I just took the form page, and added a region below in a tabular report. And I'm getting the data, but I'm getting all the records (not just the ones associated with the single record on top. I figure I need to edit the Region Definition->Source (to specify that the id numbers need to match), but the code is not editable.....
So I am in Structured Query Attributes, and I've Modified the Join Conditions - but I still get all the detail records in the bottom region. I''m trying to add in the ( + ) qualifier, but it doesn't affect anything...
I'm soo close to what i'm trying to do!
Thank you for your continued patience and assistance
Marion
here's the Source I have for the region..... (I'm including the excess ID columns just for learning purposes)
SELECT
"PHONENUMBERS"."PHONE_ENTITY_ID" "PHONE_ENTITY_ID",
"ENTITIES"."ENTITY_ID" "ENTITY_ID",
"ENTITIES"."FIRSTNAME" "FIRSTNAME",
"ENTITIES"."LASTNAME" "LASTNAME",
"ENTITIES"."COMPANY" "COMPANY",
"PHONENUMBERS"."PHONE_ID" "PHONE_ID",
"PHONENUMBERS"."PHONETYPE" "PHONETYPE",
"PHONENUMBERS"."PHONENUMBER" "PHONENUMBER",
"PHONENUMBERS"."PHONECOMMENT" "PHONECOMMENT"
FROM
"PHONENUMBERS",
"ENTITIES"
WHERE ENTITIES.ENTITY_ID = PHONENUMBERS.PHONE_ENTITY_ID
Edited by: mtpaper on Oct 12, 2009 1:30 PM
Edited by: mtpaper on Oct 12, 2009 1:32 PM

Multiple Interactive reports per page requirement

Similar Messages

Maybe you are looking for