Multiple Interactive reports on a page

Hi,
I have a requirement of drilldown pages depending on which chart user clicks on main page. I have 4 different charts on main page
Depending on which chart user clicks on main page, it should display corresponding <b>IR</b> in Tab 2.
Is this possible in apex? I am new apex and trying to figure things out. I created a chart and it drills to IR on Tab2. I made this report region on Tab 2 conditional based on parameter from main page. Now when I try to add new region to create another IR, it doesn't allow me.
I found an example that uses IFRAME to display multiple IRs on same page. But my req. is to display only ONE IR at a given point of time on a page (depending on which chart user clicks, should run appropriote the sql query)
to keep it simple, I need multiple conditional IR's on same page (Tab). Please let me know if this possible or not.
Please help me. Thanks in advance

If you only need to display one IR at a time, there is a trick you can do to get them all on the one page.
Create the IR on another page, and then copy the IR to the page you want it on. But you still will only be able to have one shown at a time (which is acheived by creating conditional display to make sure only one will be displayed). Not sure if you can still do this in Apex 4, but it worked in 3.x.
Ta,
Trent

Similar Messages

Multiple Interactive reports per page

Hello,
Standard APEX 32 behavior prevents multiple interactive report in a single page.
Is there a way around this limitation?
How can I display multiple interactive report in a page.
Thanks
R

Hi,
This might help also
http://djmein.blogspot.com/2008/03/multiple-interactive-reports-on-one.html
Br,Jari

Multiple interactive reports/tab. forms: future or everlasting expectation?

At the end of September, the statement of direction for APEX is updated for 4.2.
I notice that there's not a word anymore about the possibility to use multiple interactive reports and tabular forms on one page (declarative, without the tricks described in so many blogs and forums).
Does this mean that it will never be possible or just not yet in 4.2?
Thanks in advance for any enlightening comment about this :-)
Regards,
Bart

Bart, Joe,
Thanks for bringing this enhancement request up again. Allowing for multiple tabular forms or multiple interactive reports on one page is still a feature that we’re considering for a future release of Oracle Application Express. But we honestly don’t know yet whether this is going to make it into APEX 4.2 or a later release. And yes, there’s certainly a chance that this may proof to be too disruptive to the current implementation, and thus require a different approach. I realize this isn’t the answer you were looking for, but all we can say that we’re still actively looking into making this possible as a standard feature.
Regards,
Marc

Multiple Interactive Reports

.Hi,
Can't we add multiple interactive report based on conditional display i tryed doing I get error saying only one report per page. please suggest me is there any way we can add multiple reports.
Please suggest.
Thanks
Sudhir

Hello Sudhir,
I don't know if it still works in last version.
I am using ApEx version 3.1.2.00.02 .
And there you can create a second interactive report by copying the region of the first one.
Change the SQL-query on the region definition page.
Check the settings made for the interactive report (column order, display etc.).
VERY IMPORTANT: the display conditions have to be disjunct.
You can not display both reports simultaneously.
Regards, Tine.

Display more than one interactive report on a page

Hi,
is it possible to display more than one interactive report on a page.
Thanks for any idea
Norbert

You can't display two on one page, but it is possible to have multiple conditional interactive reports. See Duncs most excellent blog:
http://djmein.blogspot.com/2008/03/multiple-interactive-reports-on-one.html
This is probably an unsupported approach.
Cheers
Shunt

Multiple ALV reports on one page

How to display multiple ALV reports on one page.

this done by this code....
*& Report ZPR_02
REPORT ZPR_02.
TYPE-POOLS: SLIS.
Tables Declaration.
TABLES: MARA.
*Internal tables and data declaration.
DATA: BEGIN OF IT_MARA OCCURS 0,
        MATNR LIKE MARA-MATNR,
        MTART LIKE MARA-MTART,
        MBRSH LIKE MARA-MBRSH,
      END OF IT_MARA,
      BEGIN OF IT_MARC OCCURS 0,
        MATNR LIKE MARC-MATNR,
        WERKS LIKE MARC-WERKS,
        EKGRP LIKE MARC-EKGRP,
      END OF IT_MARC,
      BEGIN OF IT_MARD OCCURS 0,
        MATNR LIKE MARD-MATNR,
        WERKS LIKE MARD-WERKS,
        LGORT LIKE MARD-LGORT,
        LABST LIKE MARD-LABST,
      END OF IT_MARD.
DATA: WA_FIELD_CAT TYPE SLIS_FIELDCAT_ALV,
      IT_FIELD_CAT1 TYPE SLIS_T_FIELDCAT_ALV,
      IT_FIELD_CAT2 TYPE SLIS_T_FIELDCAT_ALV,
      IT_FIELD_CAT3 TYPE SLIS_T_FIELDCAT_ALV,
      WA_KEYINFO TYPE SLIS_KEYINFO_ALV,
      IT_LAYOUT TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS1    TYPE SLIS_T_EVENT WITH HEADER LINE,
      IT_EVENTS2    TYPE SLIS_T_EVENT WITH HEADER LINE,
      IT_EVENTS3    TYPE SLIS_T_EVENT WITH HEADER LINE.
*Selection Screen.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
*Start Of selection.
START-OF-SELECTION.
*Selecting the data.
PERFORM SELECT_DATA.
*Populating the field catelogue.
PERFORM BUILD_FIELD_CAT.
*Displaying the final output.
PERFORM DISPLY_OUTPUT.
*&      Form Select_data
      Selecting the data.
FORM SELECT_DATA .
SELECT MATNR
         MTART
         MBRSH FROM MARA
       INTO TABLE IT_MARA
       WHERE MATNR IN S_MATNR.
IF NOT IT_MARA[] IS INITIAL.
    SELECT MATNR
           WERKS
           EKGRP FROM MARC
         INTO TABLE IT_MARC
         FOR ALL ENTRIES IN IT_MARA
         WHERE MATNR EQ IT_MARA-MATNR.
ENDIF.
IF NOT IT_MARC[] IS INITIAL.
    SELECT MATNR
           WERKS
           LGORT
           LABST FROM MARD
         INTO TABLE IT_MARD
         FOR ALL ENTRIES IN IT_MARC
         WHERE MATNR = IT_MARC-MATNR
         AND   WERKS = IT_MARC-WERKS.
ENDIF.
ENDFORM.                    " Select_data
*&      Form Build_field_cat
     Populating the field catelogue.
FORM BUILD_FIELD_CAT .
DEFINE M_FIELDCAT1.
    WA_FIELD_CAT-TABNAME = &1.
    WA_FIELD_CAT-FIELDNAME = &2.
    WA_FIELD_CAT-SELTEXT_L = &3.
    APPEND WA_FIELD_CAT TO IT_FIELD_CAT1.
END-OF-DEFINITION.
DEFINE M_FIELDCAT2.
    WA_FIELD_CAT-TABNAME = &1.
    WA_FIELD_CAT-FIELDNAME = &2.
    WA_FIELD_CAT-SELTEXT_L = &3.
    APPEND WA_FIELD_CAT TO IT_FIELD_CAT2.
END-OF-DEFINITION.
DEFINE M_FIELDCAT3.
    WA_FIELD_CAT-TABNAME = &1.
    WA_FIELD_CAT-FIELDNAME = &2.
    WA_FIELD_CAT-SELTEXT_L = &3.
    APPEND WA_FIELD_CAT TO IT_FIELD_CAT3.
END-OF-DEFINITION.
M_FIELDCAT1 'MARA' 'MATNR' 'Material No'.
M_FIELDCAT1 'MARA' 'MTART' 'Material type'.
M_FIELDCAT1 'MARA' 'MBRSH' 'Industry Sector'.
M_FIELDCAT2 'MARC' 'MATNR' 'Material No'.
M_FIELDCAT2 'MARC' 'WERKS' 'Plant'.
M_FIELDCAT2 'MARC' 'EKGRP' 'Purchasing Group'.
M_FIELDCAT3 'MARD' 'MATNR' 'Material No'.
M_FIELDCAT3 'MARD' 'WERKS' 'Plant'.
M_FIELDCAT3 'MARD' 'LGORT' 'Storage Loc'.
M_FIELDCAT3 'MARD' 'LABST' 'Valued Stock'.
IT_EVENTS1-NAME = 'TOP_OF_PAGE'.
IT_EVENTS1-FORM = 'F_TOP_OF_PAGE_ONE'.
APPEND IT_EVENTS1.
CLEAR IT_EVENTS1.
IT_EVENTS2-NAME = 'TOP_OF_PAGE'.
IT_EVENTS2-FORM = 'F_TOP_OF_PAGE_TWO'.
APPEND IT_EVENTS2.
CLEAR IT_EVENTS2.
IT_EVENTS3-NAME = 'TOP_OF_PAGE'.
IT_EVENTS3-FORM = 'F_TOP_OF_PAGE_THREE'.
APPEND IT_EVENTS3.
CLEAR IT_EVENTS3.
ENDFORM.                    " Build_field_cat
*&      Form disply_output
     Displaying the final output.
FORM DISPLY_OUTPUT .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = SY-REPID.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT                        = IT_LAYOUT
      IT_FIELDCAT                      = IT_FIELD_CAT1[]
      I_TABNAME                        = 'IT_MARA'
      IT_EVENTS                        = IT_EVENTS1[]
IT_SORT                          = IT_SORT
I_TEXT                           = ' '
    TABLES
      T_OUTTAB                         = IT_MARA     .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT                        = IT_LAYOUT
      IT_FIELDCAT                      = IT_FIELD_CAT2[]
      I_TABNAME                        = 'IT_MARC'
      IT_EVENTS                        = IT_EVENTS2[]
IT_SORT                          = IT_SORT
I_TEXT                           = ' '
    TABLES
      T_OUTTAB                         = IT_MARC    .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT                        = IT_LAYOUT
      IT_FIELDCAT                      = IT_FIELD_CAT3[]
      I_TABNAME                        = 'IT_MARD'
      IT_EVENTS                        = IT_EVENTS3[]
IT_SORT                          = IT_SORT
I_TEXT                           = ' '
    TABLES
      T_OUTTAB                         = IT_MARD    .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK             = ' '
IS_PRINT                      = IS_PRINT
I_SCREEN_START_COLUMN         = 0
I_SCREEN_START_LINE           = 0
I_SCREEN_END_COLUMN           = 0
I_SCREEN_END_LINE             = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER       = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER        = ES_EXIT_CAUSED_BY_USER
EXCEPTIONS
PROGRAM_ERROR                 = 1
OTHERS                        = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " disply_output
*&      Form top_of_page_one
      text
FORM F_TOP_OF_PAGE_ONE.
WRITE: / 'Header details (MARA)'.
ENDFORM.                    "top_of_page_one
*&      Form top_of_page_one
      text
FORM F_TOP_OF_PAGE_TWO.
WRITE: / 'Item details (MARC)'.
ENDFORM.                    "top_of_page_one
*&      Form top_of_page_one
      text
FORM F_TOP_OF_PAGE_THREE.
WRITE: / 'Item details (MARD)'.
ENDFORM.                    "top_of_page_one
regards,
venkat.

Multiple Interactive reports per page requirement

Hi,
I've a requirement to create multiple reports say 4 reports on the same page but in different regions.Each and every report has some search and filter criterion so I thought of using Interactive reporting but while creating second one I'm getting error "one intercative report per page is allowed".Is there any workaround method to make this work or I need to use classic report with search fields only?
Thanks,
Mahender.

Hi Jari,
Thanks for your reply,
I tried that it works fine but one problem.I've created four individual reports on four pages and while using this IFRAME logic displaying on fifth page,there I can display all reports but report titles(page titles) are missing like which ever report I display on top is fine with title(comes from corresponding page title) but remaining reports titles are missing or truncated.is there any other way to create and display report titles?
Thanks,
Mahender.
Edited by: user518071 on Sep 21, 2009 8:19 AM

Question - Resetting Interactive Reports on Different Pages

Hi,
I currently have 5 pages, each with an Interactive Report. Page 1 contains column links with filters to the other 4 pages.
Once a user has clicked a column link with the relevant column filtered on the Interactive Report on the other page, the only way I can see for the user to reset each Interactive Report is to manually reset the report on each page.
Is there any way to perform the "RIR" or "CIR" clear cache setting on all the Interactive reports for a delimited list of pages via one button click?
Thanks in advance,
- Stuart

Hi Simon,
The scenario could be that the user clicks on 3 different column links on page 1 and the Interactive Reports on those linked pages are filtered. The user is happy with the information and decides that he/she wants to look for completely different data within the Interactive Report on page 2 (3 or4).
When they go to that page, it is still filtered based on the column link. To reset the report, they need to manually select Reset from IR menu. This would need to be done for each of the other pages with previously filtered reports.
The Reset I am looking to perform is almost like when each page is visited. It would be similar to performing a clear page cache on multiple pages and you pass the page number as a parameter from one button click using a PL/SQL block. i.e.
BEGIN
APEX_UTIL.CLEAR_PAGE_CACHE('1');
APEX_UTIL.CLEAR_PAGE_CACHE('2');
APEX_UTIL.CLEAR_PAGE_CACHE('3');
END
Ideally, if there was some way to do something similar for all or specific Interactive reports then it would reduce the number of clicks made by the user.
The application is to be aimed at users, who need to get information with as few clicks as possible.
- Stuart

Smaple code for multiple interactive reports

hi experts,
Pls send me a sample code or link for creating muiltiple interactive reports.

Hi
See the sample programs for interactive lists
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Reward points if useful
Regards
Anji

ARIA Employee Directory -How to Print Multiple Direct Report On a page

This question goes out to the experts. If we have person that has 10,15 or a large number of direct reports how can we print them on to a page so that they all fit. I am okay if they fall to another line just need to get them all on one page rather than multiple because they fall outside the print parameters?
All help in this area would be greatly apprecaited
Steve

Maybe. Keep in mind HTML was never made for print. It's quite possibly the worst medium you could choose for print. You won't be able to establish page breaks or even draw consistent boxes. In short, I estimate the probability of success in creating an org chart with an HTML template to be somewhere around 1%. I just don't want to see you spend an absurd number of hours trying to build something that's really not possible.
With that said, here are a few options to consider:
- Microsoft Word and Visio both have Org Chart functionality, though I'm not sure if you can populate it with data from a database. This would be an offline solution wherein one of the developers would, on a periodic basis, generate a new version of the org chart, export it to PDF, then post it as a static file.
- Oracle BI Publisher supports Word shapes for templates, including Org Charts per this documentation:
http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#T481174
though I think it might take effort to get the template to work. At least the output medium (PDF or RTF) is made for print.
- GraphViz (http://www.graphviz.org) is the most promising online solution I can think of. It's a command-line tool, so you would need to
-- generate the data in a file and output that to the file system of the database server (UTL_FILE)
-- call the command-line utility via a dbms_scheduler job, since you need call an OS utility from inside the database
-- provide a link to the output of graphviz.
Take a look at this image, then click on it to see the code that generated it, since that's essentially the format you'll need to output:
http://www.graphviz.org/Gallery/directed/unix.html
There's my 2 cents. If someone is asking you to do this all in HTML, please send them a link to this post.
Tyler

Custom pagination for APEX 4.2 interactive report using Page Zero

Hi,
I want to implement an «Custom pagination for APEX 4.2 interactive report» using a «page zero».
I recently migrate from Apex 3.1 to Apex 4.2 and my «Custom pagination for APEX 3.1 interactive report» using a «page zero» is not working any more.
So now I try to adapt an excellent example of Jari Laine for 4.0 but using a page zero.
I put the code JavaScript to Page zero but I must create an dynamic action to fire only for an interactive report region.
It’s a good idea?
Thank you

Thought I would try once more with my DatePicker question.
On the Apex.Oracle.Com website I have created a 1 page application that has an Interactive Report.
[url http://apex.oracle.com/pls/apex/f?p=15655:1]
user = 'test'
password = 'test'
I have 2 questions :
(1) In IE7, press 'Actions', 'Filter'. On the Column dropdown list, select 'Order Timestamp'.
Notice the prompt icon to the right of the 'expression'. This should change to the Datepicker, but in IE7 it does not. Try the samething in Firefox or Chrome and the Datepicker will appear.
Is this a BUG, or does Apex 4.02 not support IE7 ?
(2) In Firefox or Chrome, where you can now see the Datepicker, you will notice that it is the new style picker, not the old style ( called 'classic' ). I want to change it so that it shows the 'classic' datepicker not the new, but cannot see how to do it, if indeed you actually can.
I would really appreciate it if someone could take a look and let me know if I am going mad, or if we need to get all our users onto IE8. We have now gone live with Apex 4.02 and need to resolve these issues.
Thanks in advance.
Edited by: DooRon on 10-Mar-2011 05:13

Print page items on Interactive Report

Hello,
I have an interactive report showing employees detail for the department number passed in as parameter.
On interactive report, I have page items showing department name and location on the top under report title.
When I print or export the report, it just exports the data rows, not the report title and department name and location.
Is it possible to include the report title, department name and location as well in the export file?
Thanks.

For printing in specific layouts I use Anton Sheffer As_PDF package. Maybe it can help you out.
I tell about it in dutch: http://mraoul.com/?p=86
or you can go to antons page: http://technology.amis.nl/blog/8650/as_pdf-generating-a-pdf-document-with-some-plsql

Two Interactive Report in the same page

I created two interactive report following the suggestion this link
http://roelhartman.blogspot.com/2009/03/two-interactive-reports-on-one-page.html
using an IFRAME
<IFRAME src="f?p=&APP_ID.:24:&SESSION."
style="width:600px;height:600px"
name="details"
scrolling="no" marginwidth="0" marginheight="0"
frameborder="0" vspace="0" hspace="0" />
I am facing two problems.
a. I could see the logo attached to the application in the IFRAME window
b. I could not see the lower bound of the region where the IFRAME is assigned to.
Any suggestion would be of great help.
Thanks in advance
Deb

Hi,
For your first issue.
Use page template to iFrame page that do not contain substitution string LOGO.
E.g. popup page template might not have that.
Or create your own page template with minimal set of substitution strings and regions and use that for iFrame page
Regards,
Jari

Dynamic action with interactive report region refresh

Hi!
I'm using APEX 4.02
I've got a page with 2 regions.
Region1 is a (input) form
Region2 is an interactive report on the same table as region 1
When entering values on the form I'm trying to dynmically lookup similar records in the table with the interactive report.
I've made a dynamic action on the change of the form fields which should refresh the interactive report region. I can see this one fires if I add a alert to debug if it fires.
The dynamic report is based on a query with bind variables pointing to the form fields, for example
where
field1 = :P2_FIELD1
This works great on the page load, so no dynamic action is fired but I can see the rows in the report region are the ones I am looking for.
But the refresh of the report region is not working, it is never refreshing and/or showing the correct data after a change of the form fields, so it looks like the dynamic action "refresh region" is not working on the interactive report.
Any ideas why this can go wrong ?
I would like to solve this using standard dynamic actions and preferrably not via PL/SQL or JS, shoudl be possible if I should believe the documentation... ;)
Cheers
Bas
Edited by: bklerk on 26-apr-2011 3:07

Hi,
When you change value to item, I assume you do not set value to session state.
Use interactive report advanced attributes "Page Items to Submit" , set items session state before report is refreshed.
http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/app_comp.htm#sthref1235
Similar post/issue here
Hide and show region - hides on refresh
Regards,
Jari

More than one updatable report on one page.

I hope someone can help me with this.
I've spend a long time looking for the best way to do this but keep running into APEX constraints.
My problem is that I have two tables;
1) an 'object' table with static attributes (that can change value but keep no history).
2) an 'object attributes' table with attributes that can change over time (i.e. keep a history).
Some of the attributes are optional and some mandatory irrespective of whether they are static or timestamped.
I want to design a screen that shows both tables on one page - preferably both updatable on the same screen.
Selecting/clicking a row in the top table (object) will select the appropriate object attribute rows in the table below (I've got that covered - no help needed there).
If I create a new object record I also need to create an initial object attributes record.
This first initial attributes record cannot be deleted while the object exists.
The start date of the object itself and its first object attributes record should remain in sync.
I cannot separate the object table and attributes tables on different pages as all static and timestamped attributes form one collection that needs to be visible and maintainable from one screen.
The problem is APEX will not allow more than one updatable (or interactive) report on one page.
I need a solution where both tables are maintained in a uniform way for the user.
Not, for instance, one table an updatable report and the other a report with detail form.
Anybody struggle with a similar problem and found a solution to this problem?
Any pointers are most welcome.
Ruud.
PS. I have a joined view on both tables with an INSTEAD trigger that can process insert/update/delete's on the combined data however I would not like to use that if I can avoid it. It would mean a repetition of static attributes in the one updatable report.

Andy,
Apologies for the late reply - Forums have been out for a while :-(
Thanks for the suggestion. I've had a look at Denes' example and
at least now I know it is possible.
I've asked for access to his workspace but have not been given that
yet so can't look at the details yet but I can make some educated
guesses as to how it was done.
I will give it a try.
I'm still not certain whether having 2 updatable tabular reports is the
right way to go though....
Currently I'm working on a page with 2 navigator reports - one for selecting
the object and another to select the start date of the timestamped attributes.
Next to that I have an updatable detail form that shows the selected object
and attributes as one whole set using the joined view I mentioned earlier.
Inserts, updates & deletes are then done in the form.
Ruud.

Multiple Interactive reports on a page

Similar Messages

Maybe you are looking for