Multiple Layout in report

Hi
I am creating a report with multiple layout ( to be executed as concurrent request from Apps) with following 3 layouts.
1.Group Above
2.Group Above with Matrix
3.Group Above
Reports are based on Global Temporary tables which are populated in Before Report Trigger. Data is populated successfully. When only one Layout exists , it displays data as expected. But when I am adding second layout it is displaying blank report. Are there any properties that need to be set like Base Printing on , Anchor, Print Object on in case of such scneario.I have tried setting this properties with different combinations but same result.
Would appreciate any inputs from you guys.
Thanks
Yogesh

hello,
check if you experience the same behaviour if you report of a regular table (not a global temporary one).
in general you should see what you want, exactly the way you did it.
regards,
ph.

Similar Messages

Report multiple layout

hi all,
i just want to know how to create multiple layout.
based on the parameter selected i should run the particular layout.
how to do it.
any one help
regards
Rajesh

Hi Rajesh,
create your 2 layouts in the same report und surround each of the two layouts with a frame. Connect the upper left edges of the frames with an anchor, which has the properties collapsing activated. The write for layout/frame 1 a format-trigger:
IF :param_layout = 'A' then RETURN TRUE; ELSE RETURN FALSE; END IF;
and for layout/frame 2 a format trigger
IF :param_layout = 'B' then RETURN TRUE; ELSE RETURN FALSE; END IF;
So only one of the layouts is used and Layout 2 is because of the collabsing anchor at the same position as Layout 1
Regards
Rainer

How to create multiple tabs of report in 1 crystal report file

Hi,
Is there any feature in Crystal report 2008 on creating multiple tabs of report similar to Web-I?
If there is, could you give me help on this.
Thank you in advance.
Rose

Hi Rose,
I think we cant achive the same functionality in Crystal Report designer.
Regards,
Shweta

Print Multiple copies of report, and resetting Page number for each copy.

Dear frnds!
i am using developer 6i reports i have a problem.
i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
1 - for user copy
2- gate copy
3- accounts office
4- office copy
any body please tell me the solution "i am using oracle 9i and developer 6i"
Thanx
Ibrar

Hi,
I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
<?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
HEADER
PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
PSN Detail: <?$G1/PickSlipNumber_ID260?>
Page 1 of 3
<?start:body?>
BODY
<?$G1/LineNumber_ID6?>
<?end body?>
FOOTER
<?end for-each?>
<?end for-each-group?>
XML:
<R5542520>
<Pick_Slips_Detail_Lines_S24>
<Header_Custom_Section_S24>
<Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
<PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

Multiple Layouts in a single JFrame

Hi,
Is it possible to have multiple layouts in a single JFrame ? What I need to do is that I need to have following components in a SINGLE content pane of a JFrame:-
A) 2 Labels
B) 1 Button
C) 1 4x4 Grid of buttons
Now implement (C) I need to use GridLayout for nide grid like looks like
mContentPane.setLayout(new GridLayout(4,4));
But (A) and (B) obviously shouldn't be part of Grid. So I assume I need to use different layout in the same content pane. Any idea how can I accomplish this ?
Thanks

import java.awt.*;
import javax.swing.*;
class Testing extends JFrame
public Testing()
    setLocation(400,300);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel main = new JPanel(new BorderLayout());
    JPanel top = new JPanel(new GridLayout(4,4));
    for(int x = 0; x < 16; x++) top.add(new JButton(""+(x+1)));
    JPanel bottom = new JPanel();
    bottom.add(new JLabel("JLabel 1"));
    bottom.add(new JButton("JButton"));
    bottom.add(new JLabel("JLabel 2"));
    main.add(top,BorderLayout.CENTER);
    main.add(bottom,BorderLayout.SOUTH);
    getContentPane().add(main);
    pack();
public static void main(String[] args){new Testing().setVisible(true);}
}

Error while saving layout for report

Using BIEE 11. (Win64 Server 2003 R2 - russian edition)
When designing layout for report and putting text field (dos'nt matter - russ or engl) - I get an error during saving - 'Error when saving layout' (trunslated from russ)
This happens only when putting text field, with other types of filds all is ok!
Where can I find more detailed info about my error?
Also when I choose layout from existing e.g. - Dashboard.xpt and save - I get the same error. When I cut off all text fields from this template - I can successfully save it.
Thanks

Check the OSS note 550760 regarding the issue.

Add a new table to an existing Print Layout Designer report

Is it possible to add a new table to an existing Print Layout Designer report? For example, in the Production Order there is a Sales Order field (which is displayed on the report), I would like to display some information from UDFs found on the Sales Order, but when I add a Database Field to the report the Sales Order tables does not appear in the list (OWOR).

Hi
It is possible provided there is a relationship which exists between two tables.
You can add a Database field. Goto the Properties and selct Content Tab.
Now in the Table dropdown, hold the Alt Key and click. This displays all the tables in B1. After selecting the Table, you can select the related Column.
Remember there should be a relationship which exists between this column and existing columns.
Because PLD works completely on Joins to my understanding

Reg: how to change layout in report writer

HI all,
how to change layout in report painter?
regards
JK Rao

Hi everybody,
I have a report painter using transaction ke30 and I want to change the header layout.
Now it looks like that
|_________|_________|
But i want to add another header row above this row, so it will look like:
|_________________________|
|___________|_____________|
Does anyone know the answer?
Thanks a lot for your response
Edited by: Vo Duy Pho on May 24, 2010 10:29 AM
Edited by: Vo Duy Pho on May 24, 2010 10:37 AM

How to create multiple layout in single reprot

How can we make different layout on the base of single report. Let suppose, we will pass parameter which call layout1, layout2 or 3.
Any idea.

user-Keen wrote:
How can we make different layout on the base of single report. Let suppose, we will pass parameter which call layout1, layout2 or 3.
Any idea.An idea.
Make different layout different report for one report and call any one based on your choice.
Hope , it helps.

How to change layout of report S_ALR_87012083?

Hi everybody,
    How to change layout of report S_ALR_87012083 except change output control at selection screen ?
    For example,I need a list that there have vendor no. at every line of open item,and I don't need Total liabilities for every vendor.
Thanks a lot for any help.

Hi yu liang,
                 You can find vendor list having Vendor No. & without showing total liability for every vendor.
after executing the report,
1.You need to select "change layout (ctrl+F8)",
a small window comes, it has two part -> column content & hidden fields.
then u select "Vendor" from hidden field & move it to column content.
2. at column content there is a column named "Total". u need to remove check for your column name "amount".
now select "copy" button or enter. u will find the req. report.
u can save it also by ur name.
hope its helpful to u.......
plz, reward points as a way of thanks if helpful...

Report Layout and Report Query APEX tables

Does anyone know a quick way to delete report layouts and report queries from the APEX tables that they are stored in. We currently have to go into the shared components area and delete them one by one using the builder. If we could just get the table that they are stored in and delete them by name, that would be extremely useful. Oracle does not support this type of data manipulation.
Thanks,
Andrew

Hi,
There are Top and Bottom – Left and Top and Bottom – Right.
I suppose that you have something wrong in the SQL Query or in the report.
Make a new report using the wizard. Then use Report Template – Standard and Top and Bottom – Left.
Konstantin

Reports 6i - Can v hav more dan one layout in report?

Hello all,
Can somebody tell me dat
Can v hav more dan one layout in report?
plzz

The answer is yes, but you should be asking this in the appropriate forum for [url http://forums.oracle.com/forums/forum.jspa?forumID=84]Oracle Reports.
Regards,
Rob.

Inserting parameters in Web layout in Reports 9i

I have created a paper layout with parameter which works great. But when I try to run the web layout it gives the error message that cannot create cursor for group "G_courseid".
My layout and report was manually created. In my parameter
when the courseid is selected it should give responses for that course and that question. Any clue? Thank you in advance.

seel my previous posting

Multiple layouts per portal

i would like to create a look and feel like amazon.com(and many other sites) with tabs and each tab having different layout.
since a portal can only have one layout per group, how can this be done.
i was thinking of having multiple portals and then switch the user to different portals depending on the tab clicked.
but that is clumsy with all that session information transfering and admin setup.
i saw in you api that there is something called a category and that you can get a layout using a category as an argument.
is there going to be native support for multiple layouts per portal? if so, when, next release?

Hi Thomas,
you have several options with the portal standard:
1.) If the user only has one role assigned at a time you can attach the portal layout to the roles. So depending on the role the user has he sees the respective layout - BUT: how to asign the two roles to the user!? This can only be done by admins and I assume that it is no intended to call the admins every time the user needs the other role?
2.) The entry to the portal is realized with different urls like http://yourportal.com/VIEW1 and http://yourportal.com/VIEW2.
VIEW1 and VIEW2 are so called portal aliases and you can attach the different layouts to those aliases.
BUT: the two roles have nothing to do with the aliases so you still have the problem of role assignment.
3.) Each person gets two users with each user assigned to one role and one layout assigned to the user or group or role...
Anyhow: I would ask the people who brought up the idea of two different layouts - WHY?? A portal is ONE single point of entry for EVERY application and information a user needs. So why two different layouts? And what, if five others are coming each bringing their own layouts, too?
4.) If you really want to have different layouts each time a different top-level navigation point is active you have to program your own portal component. That would fit your needs but is besides standard.
Hth,
Michael

I recently purchased some information to be downloaded to one of my apps I never received the download and I was charged multiple times I reported the problem my Community

I recently purchased some information to be downloaded to one of my apps I never received the download and I was charged multiple times I reported the problem And it's been about a week my question is how long does it take to credit my account back. It's my money and I want it now.

It can take a while for your money to show up in your bank, but a week is a bit over the top. Try contacting iTunes Store Support to make sure the refund was issued.

Multiple Layout in report

Similar Messages

Maybe you are looking for