Multiple owa sites on a single server 2012 with exchange 2013 (mailbox, cas)

hi,
I'm trying to
set up an exchange server 2013 on windows 2012 with all roles installed for 2 owa virtual directory, one for integrated windows authentication and the other for forms-based authentication.
I followed a tutorial for exchange 2010.
http://technicaljeditrials.info/2011/02/28/exchange-2010-multiple-owaecp-directories-part-1/
Step 1: IP Address
Obtain a second IP address and add it to the NIC of your server.
Step 2: DNS
Add a DNS entry for That secondary IP address for the name we will want to use in the new FBA OWA Web site.
I have chosen "testwebmail."
Be sure there is a valid SSL certificate (recommended to have UC or SAN
SSL certs) on the server Which has the new name "testwebmail" that will be used in the certificate.
Step 3: New Web Site
Create a new web site in IIS on the Client Access Server and bind it to the new IP address used in step 1.
Step 4: Adding Exchange Virtual Directories
The web site has been created and bound to the secondary IP address of our server.
Also the DNS record That will be used to access the OWA FBA new page was added to DNS.
The next step is to go into EMS and begin adding our virtual directories for OWA and ECP.
Login to the Exchange server and open the Exchange Management Shell.
Then run Get-Get-OWAVirtualDirectory and ECPVirtualDirectory to see the default OWA and ECP directories.
New-OWAVirtualDirectory -WebSiteName FBA -InternalUrl https://testwebmail.mylab.ad/owa
New-ECPVirtualDirectory -WebSiteName FBA -InternalUrl https://testwebmail.mylab.ad/ecp
Step 5: Configure the Virtual Directories
To configure the virtual directories we will disable FBA on the Default Web Site OWA and ECP virtual directories
Set-OWAVirtualDirectory -Identity "OWA (Default Web Site)" -WindowsAuthentication
$true -BasicAuthentication $false -FormsBasedAuthentication $false
Set-ECPVirtualDirectory -Identity "ECP (Default Web Site)"
-WindowsAuthentication $true -BasicAuthentication $false -FormsBasedAuthentication
$false
Step 6: iisreset
now if I access the default site I log in with
windows integrated authentication, but when I try to access the second site with forms authentication tells me username or password incorrect
Tell me you know where I'm wrong?
thanks
Greetings
Daniele

Hello,
Something like this:
New-OWAVirtualDirectory -WebSiteName "FBA"
Enable the Basic authentication via running the following command:
Set-OWAVirtualDirectory -Identity "yourservername\owa (FBA)" -BasicAuthentication $true
Restart the IIS admin service in services.msc
Thanks,
Simon Wu
TechNet Community Support

Similar Messages

Configuring multiple web sites in a single OC4J instance with 10g OEM

Hi There,
there doesn't seem to be a way of configuring multiple web sites within a single OC4J instance using the 10g Enterprise Manager Website, so can i assume that there's some performance related issues with doing this, or is it just a case of if you want multiple web sites, configure it manually?
We currently use 9iAS release 1 (which has been configured to use multiple web sites - with normally 1 j2ee app in each website - in a single OC4J clustered instance, using mod_proxy to forward the http requests onto oc4j), but we are looking to migrate to 10g very soon...
The initial configuration was done by an external company, so i'm not entirely sure of the reasons why it was chosen (perhaps so that if there was a problem with a single website, it wouldn't impact all our applications)..
Does anybody else currently use multiple *-web-site.xml's in a 9iAS release 2 or 10g in a production environment, and if so did you encounter any problems with the OEM website (assuming you configured them manually)?
Thanks in advance,
Andy

Hello,
Something like this:
New-OWAVirtualDirectory -WebSiteName "FBA"
Enable the Basic authentication via running the following command:
Set-OWAVirtualDirectory -Identity "yourservername\owa (FBA)" -BasicAuthentication $true
Restart the IIS admin service in services.msc
Thanks,
Simon Wu
TechNet Community Support

Lync Server Integration with Exchange 2013

Hello,
I have Exchange 2013 standard edition server installed and running successfully on a Windows 2012 machine. Now, I would like to have a Lync 2013 server integrated with it. I came across some links telling that its not possible to integrate Unified Messaging
in the Exchange standard edition and would need an Enterprise edition license. But, when I checked my ECP, I could see that UM is already there and its enabled.
So, Is it possible to integrate Lync 2013 with Exchange 2013 standard edition? What all things I need to take care of while Integrating? If someone could shed some light on this, that would be greatly appreciated.
Thanks and Regards,
Nash Burns

Yes you can integrate Lync 2013 with Exchange 2013 Standard, the only big difference between Exchange 2013 Standard vs Enterprise is the number of mailbox databases (5 vs 50).
Follow this link for information on integrating the two: http://technet.microsoft.com/en-us/library/jj688098.aspx (specifically integrating Lync with Exchange for Voicemail http://technet.microsoft.com/en-us/library/jj687983.aspx)
Having said that, the confusion may be related to User CALs. You need Exchange Enterprise User CALs to use the Unified Messaging components. (I believe they still work regardless, but
to be properly licensed and compliant you need to have the correct number of Enterprise CALs for the number of users that use UM)
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
www.lynced.com.au | Twitter
@imlynced

Server 2012 and Exchange 2013 Migration from SBS 2011

Server UpgradeI'm migrating an SBS 2011 server to a new machine with Server 2012 R2 and a Hyper-V server running Exchange 2013. I've set up the new machine, all is running well in a test environment. I now want to migrate the old server to new. These are the steps I'm going to take and I wanted advice for any modifications or errors. 1. Demote DC on Server 2012 that I set up to test. 2. Join new Server 2012 to existing SBS 2011 domain. 3. Promote Server 2012 to DC. 4. Join the Hyper-V Server 2012 to the Server 2012 domain.5. Migrate Exchange 2010 on the SBS 2011 Server to Exchange 2013. 6. Transfer FSMO role from SBS 2011 Server to Server 2012 DC. I'll copy shared data files using robocopy.The only things I'm not sure about is the FSMO order, when to do that and the fact that I already have Exchange 2013 installed in the test...
This topic first appeared in the Spiceworks Community

I recently acquired a SuperMicro chassis that has a SAS2 expander backplane. It has SFF-8087 ports on it.http://www.supermicro.com/manuals/other/BPN-SAS2-846EL.pdfI made a post on another forum and someone mentioned that the card couldn't be used with that backplane since it's a SATA controller, however, the backplane is both SAS and SATA device compliant, it's only the RAID controller, as far as I know, that is a "SATA II" controller, and not a SAS controller.So, I couldn't find anything in the official documentation of this controller on whether or not it was able to control SAS devices. The card itself has a 3 SFF-8087 ports though, couldn't this theoretically still be used with a SFF-8087 to SFF-8087 cable(seen below)since the backplane is a SAS/SATA backplane?...

ADRMS Server 2012 with exchange 2010, I have created some new templates, they are showing up in owa but not Outlook 2013

I cannot figure out why my templates do not show up in Outlook, when I manually update the AD RMS task scheduler to run the templates get pulled and placed into the C:\Users\%%\AppData\Local\Microsoft\DRM\Templates
but when I launch outlook they are not displayed.
Has anyone encountered this type of problem before?

Hi,
Generally, the default Outlook Templates (.oft) is located in drive:\Users\<username>\AppData\Roaming\Microsoft\Templates.
Firstly, please make sure the Templates have been located in the C:\Users\%%\AppData\Local\Microsoft\DRM\Templates path of your local machine. If it is there, please copy and paste the new Templates to the default Outlook Templates location.
Then we can right-click the Folder to select Properties in Outlook, and click dropdown next to "When posting to this folder, use:" and select the custom template form in the list. For more information about Outlook Templates, please refer to:
https://support.office.com/en-au/article/Save-time-with-templates-in-Outlook-8990002c-b3d7-4fc0-a4f4-4f2f94643aa7
Regards,
Winnie Liang
TechNet Community Support

I plan to Integrate AD RMS 2012 with Exchange 2013 SP1

To use
right policy templates with OWA, Outlook and Moblie Phone ,a CAL is required
or not ?

AFAIK, You just need a standard Windows CALs to use ADRMS.
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

SBS2008: Move email from Exchange 2007 to new server with Exchange 2013

We have an old server (SBS2008) and plan to buy a new server with (Server 2012). I need to move all the exchange emails, contacts & calendars to the new server. We will no longer use the old server.
Is there a document or migration tool that will help me understand how to move this data form the old exchange server to the new one?
Old Server:
SBS2008 running Exchange 2007
New Server:
Server 2012
Exchange 2013
Any help is appreciated!

Hi Dave,
It can be done, and as Larry suggested you will consider two Server 2012 installs in order to achieve an environment that looks like your current SBS roles; Exchange 2013 on an Active Directory controller isn't a good long-term solution (SBS did this for
you in the past).
For your size operation, a virtual server host, with a Windows Server 2012 license, and two virtual machines would probably be a suitable design model. In this manner, you have Server 2012 license that permits 1 +2 licenses (one host for virtualization,
up to 2 Virtual Machines on same host).
There's no migration tool. That comes with experience and usually trial and error. You earn the skills in this migration path, and for the average SBS support person you should plan on spending 3x (or more) your efforts estimate in hours planning your migration.
You can find a recommended migration path at this link to give you an idea of the steps, but its not exactly point by point going to cover you off for an sbs2008 to server 2012 w/exchange 2013 migration. But the high points are in here. If it looks
like something you would be comfortable with then you should research more.
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Specific around integrating Exchange 2013 into an Exchange 2007 environment, guidance for that can be found here:
http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
If that looks like something beyond your comfort level, then you might consider building a new 2012 server with Exchange 2013 environment out as new, manually export your exchange 2007 mailbox contents (to PST) and then import them into the new mail server,
and migrate your workstations out of old domain into new domain. Whether this is more or less work at your workstation count is dependent upon a lot of variables.
If you have more questions about the process, update the thread and we'll try to assist.
Hopefully this info answered your original question.
Cheers,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment

Hi All,
I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
Some articles i referred.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
Thanks,
Dilip

Hi
i understand this is a sandbox environment but you should be able to install everything.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Can't get OWA to work on Essentials 2012 R2 with Exchange 2013 on second server 2012 R2 std.

I have previously with success setup a working solution with server 2012 essentials, and a second server 2012 std. with exchange 2013, I did it following this guide: http://technet.microsoft.com/en-us/library/jj200172.aspx
Unfortunately I lost the server due to a cooling error which led to an un-repairable essentials 2012, since this was a new setup and also a test setup I didn't have any working backup solution setup at the time...tsk.tsk.
Since I had to make a complete do over I chose to try out the new R2 server editions, and set it up following the same guide, when it came to this part:
Download KB2732764 for ARR 2.5, and then install the update on the server that is running Windows Server 2012 Essentials.
Copy the SSL certificate file for Exchange Server to the server that is running Windows Server 2012 Essentials. The certificate file must contain the private key, and it must be in the PFX file format.
Note
If you are using a self-issued certificate, follow the instruction in the Exchange Server article Export an Exchange Certificate to export the certificate.
Open a command window as an administrator, and then open the %ProgramFiles%\Windows Server\Bin directory.
Based on you installation scenario, follow one of these steps to configure ARR:
If you are performing a clean setup, run the following command:
ARRConfig config –cert “path to the certificate file” –hostnames “host names for Exchange Server”
I noticed that the version of "Application request routing" had changed to version 3, so obviously I didn't need to dl the 2.5 update.. When I came to the part where I wa instructed to run arrconfig config etc. I noticed
that the ARRconfig file no longer where placed where the setup guide indicated, I then went ahead and tried som manual configuration regarding certificates and such. In the end I have a working solution where Exchange and OWA is working locally but OWA isn't
working outside my local domain, the link get's placed in the RWA and is indicating the correct link for the exchange server www.remote.clinten.dk I have a certificate which include to separate domain names aforementioned and remote.clinten.dk and
I get no errors indicating certificate errors, when I try to connect to www.remote.clinten.dk/owa from outside I get a 404 error, and when I connect to www.remote.clinten.dk I get the RWA login screen for the essentials RWA. Obviously I need to set up something
in ISS probably in the url rewrite section, but I can't seem to find the right setting.. Can someone help with this?
Btw. I have found the missing arrconfig file in c:\windows\system32\essentials" and tried to run the command as described in the guide "ARRConfig config –cert “path to the certificate file” –hostnames “host
names for Exchange Server”" but it doesn't seem to work, it just prompts with a guide for using the arrconfig command and examples of correct use, I also tried removing the "" from the guide, like this "ARRConfig
config –cert path to the certificate file –hostnames host names for Exchange Server",
when I ran it without the "" It didn't prompt me with anything nor did It indicate any errors, it did not however make my OWA work either..
I am aware that exchange 2013 atm. isn't officially supported on the R2 server, but the exchange works fine inside my domain, and the pop3/smtp also works from outside, since this Is a test environment, using only my own private domain and not a company
domain I figured it would be ok to run the risk.. ;)

Hi
found this on
https://social.technet.microsoft.com/Forums/en-US/1f099068-b3ed-44f3-a8c4-c22d760a8621/arr-broken-or-bad-syntax-exchange-2013-essentials-2012-r2?forum=winserveressentials
"Ok just an update for anyone else how has this issue.
The problem has been solved by Microsoft and I have included their findings below, but basically it comes down to a typo!
I often use notepad to have all the commands I need on hand, and I must have copied the command direct from the TechNet article or other website and customised the required fields. The issue with this is one of the characters did not “convert” - for want
of a better word. I should have retyped the whole command from scratch and it would have been right!
Thanks for everyone’s input and for Microsoft for getting to the bottom of it.
From Microsoft:
We have tested on your environment and here is the investigation result from our senior engineer:
================================================================
Basically the command fails due to invalid parameter, the invalid one is the ‘-‘. I think the one customer used is copied from the online document sample which translate to the unicode is 0x8211 means “en dash”, it
can’t be input by normal keyboard, so I pretty sure it is from web (mostly HTML document).
The one we check (compare) is ‘-‘ which has the code 0x45.
So it always failed to compare the parameter and ARRconfig.exe thought it is invalid parameter.
The solution is quite simple, just using keyboard to retype the command, using normal ‘-‘ and I have tried the password prompt shows
Best Regards,
Johnny Chen
Microsoft Partner Support Community Technical Support Engineer
Microsoft Global Partner Services"

Are multiple presentation services on a single server really unsupported?

Hello all,
I can hear everywhere that multiple presentation services on a single server are not supported by Oracle, but I can't find an official source stating this.
All I could get is this page where it is stated that it is not recommended (but not unsupported):
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=1111655.1&h=Y
Can anyone please advise ?
Thank you in advance,
Cedric.

Hi cedric,
It is not recommened is what i can say,in simple words it gets jammed when you try to build a request from any of the services.
It is not supported cant be the reason,it has a work around to go and do that
Follow these blogs Multiple presentation servers using the same RPD
http://obiee101.blogspot.com/2009/10/obiee-multiple-repositorys-multiple.html
UPDATED POST
There is no such official document saying about its support by oracle,but oracle wont support handling two servers in production as it is not legal and it is going against the product capabilities.I would suggest you not to go with it.
Cheers,
KK
Edited by: Kranthi.K on Apr 11, 2011 2:53 AM

Multiple Java version on one Single Server

Hello All,
Linux RedHat 2.4.21-32.ELsmp
jdk1.3.0
j2sdk1.4.1_03
We currently have an application that only runs with java 1.3.0, but also we have other application that need to be on java 1.4.+.
What would be the right approuch in order to have multiple Java versions on a single server.
TIA,
Bruno

I am pretty sure you can do that.
I have done this with AccessGates and a Webgate is just an AccessGate with extra features. I am pretty sure we have done this on Apache with a webgate in different directories. Makes logical sense that it would work.
Thanks,
Scott

SQL server 2012 with SP2 for hosting VMM 2012 R2 DB server

Hi,
I would like to implement System Center 2012 R2 Operation Manager, VMM and Configuration Manager.
I have proposed to my customer two MSSQL Server 2012 Box, one for SCOM/VMM DB server and another one for SCCM (SCCM DB and SCVMM DB cannot be on the same computer).
But I read on Microsoft web site that only SQL Server 2012 SP1 are supported for VMM DB server and SQL Server 2012 SP2 is supported for SCOM DB server.
So my question is: Can I deploy one box SQL server 2012 with SP2 for hosting VMM 2012 R2 DB server ? if not, When SQL Server 2012 SP2 will be supported for VMM 2012 R2 DB server ?
Regards.
BrahimH.
BrahimH

Hi,
As per the link this seems to me a known issue. I cannot 100 % say because I have seen/faced this issue with
SP1 and you mentioned SP2. I would always suggest to install RTM only there is option to un select SP2 during installing.
Well thank you for reporting I guess Microsoft would take this as feedback.
Can you share setup log files please just for analysis
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Difference between database features - SQL Server 2008 R2 navtive vs SQL Server 2012 with SQL Server 2008 compatibility set?

I am investigating the impact of upgrading from SQL Server 2008 R2 to SQL Server 2012. To reduce the impact of the upgrade, I am planning to restore / create our application database onto SQL Server 2012 with compatibility level 100 (SQL Server 2008 and
SQL Server 2008 R2).
Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?

Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?
Yes there can be difference and impact there are few features deprecated in SQL Server 2012 you must be aware about that. Please see
Deprecated Database Features in SQL Server 2012
Deprecated SQL Server features in SQL Server 2012
After you migrate database to 2012 please don't move ahead with production unless you have tested your application to new created database
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

SQL Server 2012 with SP1 on Windows 8.1 Pro

Can I install "out-of-the-box" SQL Server 2012 with Service Pack 1 Enterprise Edition or SQL Server 2012 Developer Edition on my Windows 8.1 VM?
Thanks.

Hello,
SQL Server 2012 SP1 is fully supported by Windows 8.1, and there is no need to install any SQL update for the installation.
Enterprise Edition is not supported on client operating systems like Windows 8.1 but setup won’t prevent you from installing.
Developer Edition is fully supported on client operating systems.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Trying to install features for PowerPivot and Reporting Services from SQL Server 2012 with SP2, but no access to key?

Hi,
I had installed SQL Server 2012 PowerPivot on WFE and App Server. This is test farm with 1 WFE and 1 APP and 1 SQL Server.
However, we had a heap of issues with Windows Claims Authentication and PowerPivot - issues were raised with "unable to make a connection to EntityDataSource" . Now we uninstalled the PowerPivot and Reporting Services features and wanted to install
with the SQL Server 2012 with SP2. Originally SP2 was installed seperately and we had read there had been issues.
Anyway on trying to install the features again using the SQL Server 2012 with SP2 iso I get
Could not open key UNKNOWN\Components
I don't want to start deleting or changing permissions as quite dodgey. What is this key for anyway and how do I resolve my issue.
Thanks.
John.

Hi John,
Did you meet the error message during the process of configuring the PowerPivot for SharePoint?
If yes, I suppose that the existing features or components have not been uninstalled completely.
I recommend to delete the two keys left when uninstalling the PowerPivot and please make a copy of the registry keys before you delete the two keys:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\ServiceProxies\Microsoft.AnalysisServices.Sharepoint.Integration.MidTierServiceProxy
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\ServiceProxies\Microsoft.AnalysisServices.Sharepoint.Integration.MidTierServicea
Please check the steps in the link below to see if there anything wrong when you uninstalling the PowerPivot and then re-install it to see how it works:
https://technet.microsoft.com/en-us/library/ff487866(v=sql.110).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Multiple owa sites on a single server 2012 with exchange 2013 (mailbox, cas)

Similar Messages

Maybe you are looking for