Multiple PO's created for a SC with a Single line item except delvery date

Hi Experts,
I have one issue ... SRM - Classic scenario
One Shopping Cart created with one line item ... but generated two PO's EX - First one - A and Sec - B
Almost the data is ame except the delivery date .
There can be a possibility that it was splitted into two PO's .. I will accept it ... but the problem I am facing is different ...
When I am trying get the PO details in SRM side .. using Tcode BBP_PD ... I am able to see two PO's ...
But when I am trying get the PO details using the FM - BBP_PD_PO_GETDETAIL .. here I am able to see only one PO that is B here ...
I am not able to find PO - A in SRM Side ...
But I can See in the backend sys .. R/3 ... TWO PO's (A and B) are available ......
IN backend system we are having one Report Program Which will display the Shopping cart number for the perticular PO number ... when I am trying to execute this report to get the Shopping cart number for A Purchage Order ... I am not able to get the Shopping cart number ... message is Shopping cart does not exist ... in this program we have used the standard FM only ... there is no problem with this report ...
My Question is Why I am not able to see the first PO ( A ) at SRM end ... there is table where the PO's get stored at SRM end BBP_PDBEI .. in this table also I can see only the PO - B not A .
1.Please let me know what can be the problem ... and guide me to find the PO at SRM end ...
2. Why the Shopping cart converted into Multiple PO .. when thr is only one line item ...
3. I think PO cannot be split into multiple PO's based on Delivery date ...
We have not done any splitting criteria in our system ... everything is standard only ...

hi Hari
only one PO is possible . check the item both are same or not.
for eg. one sc created and went to cockpit for vendor assignment - PO will created from purchase rside
in the mean time end user change the material in the cart via check status and assign valid source of supply and PO will create.
1 sc- 2 POs created in my past experience.
and deleted which PO i dont like.
in BBP_PD you can not see PO docs, since you are in classic ? you can see if it is order as direct material since PO will create in SRM though it isa classic..
what really happened in your system,
po split for delivery date means how did you get different dates.
br
muthu
Edited by: Muthuraman Govindasamy on Oct 27, 2009 12:10 PM

Similar Messages

BAPI_BILLINGDOC_CREATEMULTIPLE, creating a Bill doc with a single line item

Hi there,
I am trying to create a Billing document with reference to Sales document using this BAPI (BAPI_BILLINGDOC_CREATEMULTIPLE)
..but the generated billing document is creating only single line item where as the original Sales document is containing a Two line items, ie. 1 main line item an a Sub line item for this .
I am passing the Values mentioned below..
As per requirement is need to create a Pre invoice or a Proforma with Provided Sales Document.
it_billingdata_in-ORDBILLTYP = Proforma/Preinvoice
it_billingdata_in-REF_DOC = Reference Sales doc number
it_billingdata_in-REF_DOC_CA = Reference Sales document category('C').
Can some one please suggest any thing else do i need to pass apart of these field..
Appreciate of some one answer me.
thanks
Srinivas

Hi Srinivas,
You need to loop on the internal table 'it_billingdata_in' based on the Sales Order line items and pass the value to 'it_billingdata_in-REF_ITEM' for every line item of the Sales Order.
Hope this helps.
Regards,
Pranav.

Post Invoice for Service Entry with many Service line item-MM-LIV

Dear All,
I have a problem to post Invoice for Service Entry with many Service line item. The problem is as follow:
I have created 1 Service Entry which has 5 Service line item in it. Three of the service line item are subject to Value Added Tax (VAT), the others aren't. Then, i wanted to post Invoice for the Service Entry, however, it just display 1 item which amount in total. How can i segregate each service line item in Service Entry thus i can post Invoice for all Service line item with subject to VAT and all service item with not subject to VAT, if just 1 Service Entry created for it ?
Please help me.
Thank You

Hi Ganda,
If you mark the 'service based invoice verification' checkbox in your PO item, your service items will be in your invoice as seperate invoice lines. Then you can modify the taxcodes on service item level.
Kind regards, Dick Hendriks.

PO print-preview for a PO with all deleted line items

Hello MM Gurus,
I am not able to print preview of a PO for which i deleted all the line items. It gives me a message saying that no print relevant changes.
Client need to print such POs. Client expects a text like "item cancelled " for deleted PO items.
My understanding is that its standard SAP pre delivered customising however it is not working.
Pls suggest.
Regards,
Pankaj

Ask your ABAPer to modify the smart form, deleted materials wouldn't come for obvious reasons in standard system ... you need to get in customized/ developed.

Payment terms for Customer Invoice with a credit line item

Hi all,
We have a business scenario where we create customer invoices on a weekly basis. The payment terms for these items are a certain payment discount if paid within 365 days. Included in these invoices are credit items which relate to refunds that are due to the customer.
Below is a scenario for Customer XXXX:
Invoice 1 Baseline date 12.01.2007
Invoice 2 Baseline date 08.02.2008
Invoice 3 Baseline date 15.02.2008
I have set up a payment run for this customer to direct debit their items. In my scenario I only want to pick up the first two invoices.
Therefore I set up the payment run to pick up those items which are due up to 09.02.2009, setting the next payment run posting date to 10.02.2009. I would expect the system to pick up only the first two invoices.
What the system does is that it pays/collects the first two invoices in total, but then selects only the credit items of invoice 3. I would expect it to ignore Invoice 3 altogether.
In another example if I had the same invoices, but invoice 3 did not have any credit items involved, then it does ignore invoice 3 as
expected.
I need to understand why for the credit items within a customer invoice are treated differently in relation to payment terms.
Thanks
Natalie

In the customer master assign a different credit memo term than the payment term.
Try changing the credit memo term for 3rd Invoice as such it do not fall in your selection criteria.

Where to see activities, which are created for the campaign with target group

Hi
I have created a Communication Method in SPRO -> CRM -> Marketing -> Marketing Planning & Campaign Management -> Campaign Executtion - Define Communication Method : Activity has been configured
Activities are not appearing after creation of campaign with target group.
Where to see activities, which are created for the campaign with target group?
Regards
Hamid

Hello,
alternatively to check table CRMD_ORDERADM_H directly you can use the related transactions search for the campaign:
This should bring all activities generated by the campaign. If this is empty first check the job log of the campaign execution job again:
This gives information if any target group members have business transactions created. If the log does not contain the required information you can debug from SM37. The business transactions (activities, leads, sales orders) are generated from function module CRM_MKTTGGRP_PROC_CREATE.
best regards,
Johannes

Can we create multiple billing document from delivery with single line item

can we create multiple billing document from delivery with single line item

Hi
Please check the link
[can v create multiple billing document from delivery with single line item]
and as Lakshmi said, check the forum before posting an issue.
Regards
AA

GR can not printed for PO-Multiple account assignment on single line item ,

Hi!
I made a pr with single line item with 3 account assignment on percentage basis.I created a PO against .GR non valuated was automatically ticked so no account assignment was created at the time of GR posting.
Can I make a valuted GR against PO line item with multiple account assignment.
I faced another problem .I displayed the GR and after ticking out put check box in the general data page of the GR doc. the output is being saved but the update is terminated immediately.and no output page is generated in this item level.This output problem is not there at the time of single account assignment at PO line item.
Can you please let me have the solution ?
Thank snd regards,
Suranjana

> I made a pr with single line item with 3 account assignment on percentage basis.I created a PO against .GR non valuated was automatically ticked so no account assignment was created at the time of GR posting.
When you are having the multiple account assignment, then the system will force you to have GR-non valuated indicator being flagged which results in the fact there is not any FI document at GR posting stage and this is the standard feature of SAP.
> Can I make a valuted GR against PO line item with multiple account assignment.
No, not at all. The disability of GR indicator can be set in OME9 with account assignment category
> I faced another problem .I displayed the GR and after ticking out put check box in the general data page of the GR doc. the output is being saved but the update is terminated immediately.and no output page is generated in this item level.This output problem is not there at the time of single account assignment at PO line item.
In fact, it is possible to maintain multiple account assignment for each and every PO line item by selecting the 'Multiple Account Assignment' button in the 'Account Assignment' View of the Item Detail of PO. However, for such multiple account assignment selection, no accounting document will be generated upon GR maintenance. This can only be done during IR via LIV process.

Create a call blast with a single extension number

Hi
I would like to create a call blast with a single extension number but i's no possible. How can I get around this?
Thanks

I can't for the life of me see the point in this, you could just assign another dn as an overlay or secondary number, but what you *could* do is:-
create a dummy ephone-dn (any number) and add this into the list of numbers? (siince you need a minimum of two this should work fine).
since it will not be assigned to any phone it will not cause any issue that I can see.
p.

Single line item for multiple line item payment.

Hi
I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated.
However when i saw the vendor line item, i saw that three debit line items was generated for the clearing the open invoices (i..e 3 credit line items). so when i say vendor line item report, there were total 6 cleared line items (3 for credit i.e invoice and 3 for debit i.e. payments)
But is it possible to get single debit line item for all the three invoices cleared. If yes, please let me know how i can get it.
If i will have one single line item for payment, vendor report would be simpler. Please help

Hi,
1. If you do payment through F-53, then each invoice have separate payment line item. This is not avoidable. If you do payment through F110, then you can group the line items for payment, so there only one payment line item for many number of invoices.
2. While clearing through F-44, system is generating automatic line items because, there are exchange rate fluctuations. You can't avoid these line items, as these automatic line items only match Debit and Credit amounts in order to post the document.
Rgds
Murali. N

Function module for FI document change with G/L line items

Hi!
Does anybody know how to change FI document with G/L line items (fields like XREF3, SGTXT, ZUONR - generally speaking, all the fields can be changed with FB02)?
FM FI_DOCUMENT_CHANGE has needed functionality and works well for account payables and account receivables line items, but it doesn't handle general ledger line items.
Regards,
Maxim.

Hello!
The function has some mandatory fields to use:
I_AWTYP -> get value from BKPF-AWTYP for the specific document;
I_AWREF -> number of the document to change;
I_AWORG-> concatenate document's company with respective year;
Then, only one of the following fields should be filled:
i_lifnr,
i_kunnr,
i_obzei,
i_buzei.
You can find the relevant data for this fields in BSEG.
The structure I_BSEGC should be filled with data you think appropriate. I didn't tested it, but i think the first fields are sufficient.
Then, add lines (1 for each field you wish to change) in table T_ACCCHG.
However, you should notice that you're not allowed to change all fields. For instance, KKBER is one of the fields that is forbidden to change in this FM.
Hope that helps.
Rui Delca Mendes

Single line item for multiple open items in app

we have three open items   to vendor x 100001000010000
But we are paying to vendor only 10000100005000
At the time of entry system showing
Vendor account 25000
             To    Bank account       20000
             To    Bank account         5000(here we paying partial amount of 3rd open item)
But my Clint requirement is system should post only single line item for bank account 25000 for reconcilation purpose
Would you please suggest where we need to do customization?

Hi Anantha,
How are you making the payment which transaction you are using ? Both Manual & Automatic payment
the suggested solution is go for split payment terms. configure using OBB8 and OBB9
Hope this helps
pbb

Asset Creation in PR and PO and MIGO as a single Line item with "N" qty

Hi All,
In Purchase requestion ME51N
Now we are creating "n" number of assets ( All are same item but "s.no" will vary) with "n" number of line item.
Instead of this I have to enhance to create only one line item( For same item) with "n" quantity.
for the ASSET account Assignment we have to create Asset(Temp no) for the each item/quantity(if the same item).
as well as if they are going to create a PO with ref to PR they have to see all the "n" number of asset no.
In MIGO creation for each asset we have to assign S.No and Asset Tag.
How enhance the functionality in PR,PO and MIGO as well as in Invoice.
Is it any User Exit/BADI is available for PR/POand MIGO to show all the "n" number of assets for a single line item.
Kindly help me to give details to proceed further.
Thanks in advance.
sharma

Hi Sharma,
What i understand from your question is, you want to create a single line item in PR and PO. But the qty would be > 1.
Each single qty would have its own asset number in account asssignment tab of item details of PR & PO.
This is what you are expecting...Right???????????????
Then this is possible with certain limitations.
While creating PR, enter only one item with more qty.
In item details section, in account assignment tab, on top left corner, there will be a button called Multiple account assignments.
Click on it, then it looks like a table, where you can enter more than one line. (each line will have its own asset no)
And choose option Distribute on qty basis for field Distribution.
So that you can enter 1 qty for each line. ( Ex: if you created one line item in the item level with 10 qty, you need to maintain 10 line here, each qith 1 qty and diff asset no).
The only limitation to this is, the GRN would be treated as non valueted. So when you make GRN there wwould not be any accounting doc. ( means no use of GR/IR clearing account as like normal for POs)
when you prepare MIRO, all the assets will be capitalised and vendor credited.
But in case if you receive partial invoice, then you have choose manually in MIRO. which asset is ot be capitalised.
After entering the PO number in MIRO, there will be one line will be appeared with full qty. in the same line, move till the end of line, there you will have one button called Account assignments.
Choose and go there, here you can choose which individual asset line to be considired.
This will resolve your issue.
Thanks,
Srinu
SRBORIGI_MULTIPLE ACCOUNT ASSIGNMENTS

In Capital P.O - Multiple asset number in a single line item

Hi friends,
My Client is using SAP 4.7. In capital P.O selecting account assignment as 'A' asset and entering in description as Laptop 5 Qtys in a single line item. in item details account assignment tab its asking to enter asset. I'm able to select only one asset number. But my client requirement is it should ask to enter 5 asset number....
Pls anyone give solution for the above scenario....
very urgent.... pls

Hi,
1st check in OME9 t.code for account assignment A, the selection of 2(Multiple account ***)in field ID: AcctAssgt Scrn and Distribution field as 1 and save.
Then during capital P.O. creation for single line item & in Item details TAB, in account assignment segment, you can enter qty with asset number (A1) with G/L account for 1st Line and for 2nd line keep qty. with asset number(A2) with G/L account ( different G/L Account) OR enter qty with asset number (A1) with G/L account for 1st Line and for 2nd line keep qty. with another asset number(A2) with G/L account (same G/L Account)
Option-1----> In account assignment segment , As you needed
G/L account----
Asset
12345u2026u2026u2026u2026u2026u2026u2026u2026A1
12346u2026u2026u2026u2026u2026u2026u2026u2026A2
12347u2026u2026u2026u2026u2026u2026u2026u2026A3
12348u2026u2026u2026u2026u2026u2026u2026u2026A4
12349u2026u2026u2026u2026u2026u2026u2026u2026A5
Having a concept that GR is non-valuated and accounting entries in invoice (without tax) are:
Vendor A/C: Cr
G/L account (12345): Dr
G/L account (12346): Dr
G/L account (12347): Dr
G/L account (12348 ):Dr
G/L account (12349 ):Dr
Option-2---> In account assignment segment , You can have also
G/L account----
Asset
12345u2026u2026u2026u2026u2026u2026u2026u2026A1
12345u2026u2026u2026u2026u2026u2026u2026u2026A2
12345u2026u2026u2026u2026u2026u2026u2026u2026A3
12345u2026u2026u2026u2026u2026u2026u2026u2026A4
12345u2026u2026u2026u2026u2026u2026u2026u2026A5
Having a concept that GR is non-valuated and accounting entries in invoice (without tax) are:
Vendor A/C: Cr
G/L account (12345): Dr
Regards,
Biju K

Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers in fbcj

Hi all ,
I have a requirement to Post Cash Journal Document using FBCJ tcode.
Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
for exp:
pk   GL a/c   description       amount   cost center profit center
40 400101 telephone exp   500        1403            P 1000
40 400101 telephone exp    100       1404            P 2000
50 200100 cash in hand      600-
   This is My requirement is it possible in fbcj
    Please suggest me.ASAP.
Regards
   Naresh.

Hi,
This you can do it in two ways:
1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
(This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
Or
You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
I hope this should help you.
Regards
Avisek Bhardwaj

Multiple PO's created for a SC with a Single line item except delvery date

Similar Messages

Maybe you are looking for