Multiple PR doc types

Hi Experts
My client wishes to use several PR documents.
However, for project objects we can configure only one doc type.
Is there any workarround or enhancement, where we can have a field in component or activity detail to specify the required PR doc type?
warm regards
ramSiva

Ram,
You can use the UserExits
COZF0001(for External activity) & COZF0002(for Material components).
There are lot of threads available in this forum for multiple PR doctypes.Please refer them for futher details

Similar Messages

Multiple PR doc type for Maintenance order - Non stock item category

For non-stock item requirement in PM, we create a maintenance order and indicate item category as "N" in components tab. Accordingly a purchase requisition is created as per configuration. We have assigned PR doc. Type “FO – Framework requisition” for Maintenance Order Category.
SPRO - PLANT MAINTENANCE & CS - Maintenance and Service Processing - Maintenance and Service Orders - General Data - Define Account Assignment Cat. and Document Type for Purchase Requisitions
Now according to the new requirement, we need to have different PR Doc type as per CONTROL KEY mentioned in the Maintenance Order.
Example:
If the Control Key is “PM01 - Plant maintenance – internal” the purchase requisition document type should be “NB – Purchase Requisition”. If the Control Key is “PM03 - Plant maintenance-External(services)” the purchase requisition document type should be “FO – Framework Requisition”.
Please advise how to configure the same.
Regards
Sathish Kumar Balakrishnan

Hi Partha,
This is a simple enhancement. In our scenario, we had configured PR document type "FO" in SPRO settings for "Document Type for Purchase Requisitions".
Hence to have "NB" PR document type whenever material components are being indented through maintenance order, we used this enhancement COZF0002
Please instruct your abaper to add similar logic, as shown below.
Enhancement:COZF0002
Functional module:EXIT_SAPLCOZF_002
Include: ZXCOZU02
Logic:
IF sy-tcode eq 'IW21' or sy-tcode eq 'IW22' OR sy-tcode eq 'IW28' OR sy-tcode eq 'IW31' or sy-tcode eq 'IW32' OR sy-tcode eq 'IW38' .
IF resbd_imp-postp = 'N'.
eban_ord_cust_chg-bsart = 'NB'.
ENDIF.
endif.
Hope this helps.
Regards
Sathish K B

Multiple doc type setting for service PR generated from Maintenance order

Hi Gurus,
My client has multiple company code and has different document type for PR and PO as per the company code. For generating the service PR from maintenance order system take the document type of PR defined in the config.
Is it possible to define multiple document type for service PR depend on the company code/ Plant level?
Kindly help.
Regards
DP

Hi Ravi,
I used the User Exit COZF0001 . Since we can assign only one PR doc type in the config .
I have assigned one PR doc type in configuration which will work for a company code and all their respective plant. So in this case user exit wont do any job for changing the doc type.
You will defined a condition in the User exit saying that if company code /plant which you get it from maintenance order is not same (Config ) then provide the PR doc type which you want to create for respect plant or company code.
I dont have coding right now with me. You need a small coding to be done to create the separate PR doc type in EBAN-BSART
with respect to plant . Check in your configuration at what point of time you are creating the PR either in saving or release of MO. You can take the even to activate the User exit.
Consult your ABAPer they can do in 10 min.
DP

Reg- Single invoice for multiple delivery docs

Dear All,
WIth the suggestions from the below given thread, i have changed the routines in copying control for item level as 03.
SAP ERP Sales and Distribution (SAP SD)
Using delivery duelist(VF04) , I selected 2 pending docs and tried to create billing doc , but it got created as separate invoice. what is the actual process to create single invoice from multiple delivery document.
Rgds

Those deliveries having same criteria like,
1. Payer
2. Payment Term
3. Incoterms
4. Destination country
5. Billing date
6. Actual Goods issue date
7. Foreign data trade
8. Billing doc type
9. Shipping conditions
10 Account assignmment group
11. Exchange rate
12 Billing relevance field in the item category
13 Sold to party
will be combined into one Billing document automatically and this controlled from the copy control table. and it VTFL choose your delivery header and in that at item level VBRK/VBRP should be 001
In VF01 you can input three or more such deliveries and execute then those will be combined in to a single bill and you can do that in VF04 also
Regards
Raja

PR to PO - ME59 Doc type issue

Hi Experts,
I am executing the functionality of auto PO and did all the master data settings.
When I convert PR of doc type ZNB to PO via ME59, then it takes PO doc type as ZNB.
Similarly, when I convert PR of doc type ZNB1 to PO via ME59, then it takes PO doc type as ZNB1.
All of the PO doc types are linked to all PR doc types in configuration. Also nothing is maintained in ' Define default values for document types '.
Please let me know if there is any standard setting wherein PR and PO doc types are linked for auto PO. Your inputs are highly appreciated.
Regards,
Abhijit

Hi Abhijit,
For Automatic PO Creation through ME59 transaction, the PR document type needs to be link to only one PO document type. If the PR document is linked to multiple PO document type then the First PO document type which is available in alphabetical order in table T161A corresponding to PR doc type will be picked and the sytem will try to crete the PO for this document type.
Link the PR document with one PO document and try, issue will get resolve.
Thanks
Shashi
Do give points if the info is useful.

Stop Multiple Billing Docs generation for multiple confirmations ,

Hello Experts,
We have implemented the SAP CRM service module.
We are creating the gollowup Service Confirmations for the Service Process.
Some times we are facing the problem with Billing Doc generation for Service Confirmations in CRM system.
We are using the colletive Billing process and it runs evry night.
The Probelm :
One Service Process has multiple confirmations and the collective billing process creates the Billing Doc for each and every Confirmations.
Our general process, is only one Billing Doc should be generated for all the confirmations.
I am not understading ,why the system is generating the multiple Billing Docs for multiple confirmations.
Please If any body has any suggestion, please provide.
Regards
Madhu

Hello Madhu,
Are all your confirmations exactly same?
One billing document will be created only when all the fields (mentioned below) are same -
1. header fields
- Billing type
- Billing unit
- Payer
- Collective run identifier (GUID)
- Terms of payment
- Billing date
- Value date (is set to the billing date by default)
- Document currency
- Reference currency
- Incoterms part 1
- Incoterms part 2
- Split criterion
- Reference number
- Pricing procedure of pricing
2. header partner. partners must even have same address.
To analyze the cause of split, use the 'Display split analysis' function in the display of the billing list.
Hope this reply helps.
regards,
Rimzhim

Multiple rebate condition types in one invoice

I had defined multiple rebate condition types as Y000, Y001 and Y002, which are montly offtake rebate, distance rebate and yearly offtake rebate.
Y000 and Y001 can be in the same validity period and also will be applicable to the same invoicee.
When i create a rebate agreement for customer for Y000 and go for the settlement of the rebate it is happening fine.
But for the same customer, i had defined Y001 as a rebate agreement type for the same period and materilal.
The sales volume is not updated in the rebate agreement. Evenif I do VBOF the sales volume is not updated.
the error that comes while doing VBOF is :
"7000158055 Document number RCFL 7000158055 2011 was already assigned
7000158053 Document number RCFL 7000158053 2011 was already assigned
7000158052 Document number RCFL 7000158052 2011 was already assigned
7000158054 Document number RCFL 7000158054 2011 was already assigned"
Please help me to solve this problem.
Mrs. Swati Pawar

Hello Swati,
the suggestion of JP is correct.
I explain it better.
- the document type of FI document created from SD depends on the customizing of billing type field TVFK-BLART. If it is blank, then by default is 'RV'.
- if the number range assigned to the account document type is External, then the FI document gets the same number of the SD invoice.
- transaction VBOF creates FI document referred to SD invoice. If it has external number range, and an FI document already exist with same number (created when SD invoice has been released to accounting), then the errof F5152 occurs.
SOLUTION:
in the selection screen of VBOF there is the field FI-Doc-type. Here you should specify the FI document type that should be created by execution of VBOF, and of course it must have number range internal.
Please try this.
Best regards,
Ivano.

KR doc type posted without vendor line item a mandatory item category

Hello Gurus,
We have SPL document splitter activated in our ECC system. We have the business transaction variant 0300 / Z001 assigned to doc type KR. The vendor line is obligatory in the above business transaction variant (BTV). THe splitting rule is also assigned for this BTV.
THe problem is that despite having the vendor as obligatory for this BTV, we are able to post the doc type KR (vendor invoice) without the vendor line item e.g.. doc with doc type KR and debit and credit to expense a/c.
Please share your experience if anyone has come across this issue,
Prakash

Hi,
To make the vendor line mandatory for KR document type, you can write the validation as below:-
Step 1:-
Create a message ID via transaction code SE91 for message class /EACC/MSG/ACC_COMP as you want to display to user.
Step 2:-
Go to transaction GGB0 and create the validation step at complete document level in Financial Accounting as below:-
Pre Requisits:-
BKPF-BLART = 'KR'.
Check:-
Create a exit code using user exit and check that line items have at least one vendor line item.
For this take the help of ABAPer and create a copy of the program RGGBR000 and code your check here and assign to the application area GBLR in view V_T80D via transaction code SM30.
Message:-
Message created in step 1 as error message.
Step 3:-
Please also check that this validation has active status (Status=1) at line complete document level (level 3) for your company code in transaction OB28.
Regards,
Gaurav

Changing doc. type after creating a doc. type.

Hi Friends,
We are doing our time ageing from the time of creating the document in DMS. We created a document with particular doc. type wrongly, after two days we found that the DMS creation was done with wrong doc. type. In this how to transfer to new correct doc. Type, if we delete this & create a new we canu2019t get any info that it was created two days back.
We made Z report for this time ageing report.
Regards,
Sai Krishna

You cannot change the document type after the document has been created. The only way to do this would be with an enhancement and this would create major issues with the integrity of your system

Billing doc types

Hi Gurus,
Can I confirm that invoice list is not a billing doc type and
Returns and External transactions are also not billing doc types.
I am not sure if only 'returns' is mentioned, does it mean the Returns order , the Returns delivery or credit memo request of that return or the credit memo for the returns.
thanks.
M Russo

Yes it is true that you can consider Invoice List also as one of the billing document type. I hope you would be aware of the functionality of Invoice List.
For more details, go through these documentations.
[Creating an Invoice List|http://help.sap.com/saphelp_45b/helpdata/en/dd/56111c545a11d1a7020000e829fd11/frameset.htm]
[Invoice List|http://help.sap.com/saphelp_46c/helpdata/en/dd/561102545a11d1a7020000e829fd11/content.htm]
thanks
G. Lakshmipathi

Crystal Report - multiple sales document types

In XLR, I can easily drag 'DocNum', 'DocDate', 'Sales Doc Type' fields and specify the filter to show sales doc type equal to A/R invoice and A/R credit memo. It neatly shows various types of sales documents and display them in rows.
In crystal, I have to drag the 'DocNum', 'DocDate' fields for A/R Invoice, A/R credit memo individually under different columns. Is there a way I can dispaly mixed sales document types in rows? Thanks.

Hi,
In XLR, you get the data from JDT1 table. You can do the same for CR.
Thanks,
Gordon

WRP1 excluding open POs based on doc type

Hi friends,
We are using SAP IS Retail ECC 6.0
In our business, we are having requirement that Open PO quantity of particular document type (eg ZNBA) should be excluded from the WRP1 requirement calculation.
Eg:
For an article 100001, Site A001, following are the details,
Reorder point - 10
Target stock - 20
Current stock - 5
Open PO quantity: (ZPO1 and ZPO2 are PO doc. types)
ZPO1 - 2
ZPO2 - 1
Now WRP gives requirement of article as of 12 quantities.
My requirement is to it should not include ZPO1 open quantity in consideration but should take ZPO2 into consideration.
Hence requirement is to create PO for 14 quantities
How do I achieve this?
We have a control in SAP IS Retail where we can specify, that stock of which storage location should be considered in replenishment requirment calculation.
Do we have a similar control for the PO Doc type? If not, how do I achieve workaround?
Thank you,
regards,
Gaurav

Hi,
Do the Following, Create a new storage location., "ZL01"
Whenever your creating a PO with this "ZPO1" document type assin this Slocation "ZL01", then do the below settings in SPRO..
SPRO->Materials Management->Consumption-based Planning->Planning->Define Storage Location MRP per plant.
(In RP indicatior please give "1"Storage location stock excluded from RP, this will exclude the stk from this location)
Regards
GK.
Edited by: Gnana Kumar on Oct 22, 2010 11:15 AM

Creation of Excise Invoice in J1IS Transaction - using DLFC ref. doc. type

Hi,
I tried to create the excise Invoice using Ref. Doc Type DLFC in J1IS by giving the material document. But it is not allowing me to process further.
The business process requirment is to create a Supplementary Excise Invoice(Customer is Billed for a lesser value earlier)
we tried the following:
1. Credit memo request
2. Credit Memo
3. Excise Invoice in J1IS using sub.Tran Type(to map the Sales exc Inv Accounts). The reson why we used J1IS is to meet the requiremnt of generating the Outgoing Excise Invoice Number which is not possible in J1IH.
Now the issue is, the excise invoice created in J1IS is not available for Utilizaton in J2IUN
Please Suggest what process to be followed to address the issue.
regards,
Girish

In normal circumstances, it is not possible to generate an excise invoice for credit / debit notes in SAP. Moreover, DLFC excise invoice type can be generated only if delivery is involved. So in order to achieve the requirement (and fool the system :-|), you can try by creating a delivery with an item category as TAX so that it will not check for stock, do PGI and invoice (credit memo) can be generated referencing credit memo request. Finally, try to generate an excise invoice via J1IIN
I have never tried this option and hence, its only a guess that this should work. Update after testing.
thanks
G. Lakshmipathi
Edited by: Lakshmipathi on Jul 26, 2011 2:07 PM

Posting of cross company transaction with different doc types

Hi,
The scenario is:-
We have two companies X and Y.
X makes a payment to Y with the following FI entries:-
Company Code X
Dr Vendor Y
Cr Bank HDFC
Company Code Y
Dr Bank ICICI
Cr Customer X
Now this needs to be a cross company transaction where the doc type for CC X should be vendor Payment 'KZ' while the doc type for CC Y should be a customer reciept with doc type 'DZ'.
Although I am able to map the accounts in cross company code config I am not able to split the transaction of different company codes with different document types.
Is there any way we can do this in standard SAP?
Thanks in advance,
Nitish

Hi
As per your issue ...There are no possibilities to post in sap with different document types.
If you want you can post cross company code transactions with one document types
Regards
vamsi

How to set Goods Receipt Indicator in PO based on Vendor or PO doc type

Hi.
Can someone suggest any solution to automatically set the Goods Receipt Indicator in PO (ME21N) to "blank" (untick) based on either a vendor or a PO doc type.
Thanks.
Tess

You can untick it from vendor master and info record.
1. Using MK02 - Go to purchasing data and the untick the GR-based Iv
2. In info record for the vendor and particular material - purchasing organization data1

Multiple PR doc types

Similar Messages

Maybe you are looking for