Multiple Problems With 8500 wireless

Most recent problem is failure to align after replacing all print carteridges. First set ran out after only printing probably a quarter pack of paper. Output has extensive skips in printing and alignment process kicks off (unsuccesfully) every time something is printed using still more ink. Product reviews relative to paper jams are consistent with our experience and they are very difficult to clear. We have a very old printer that outperforms the 8500 and I would not recommend this printer.

Agreed. I've had nothing but problems with this printer. First it won't print MS Word documents. Then streaks all over prints. Then bogus Paper Jam messages. Now loud clunking and twanging noises, and won't print.

Similar Messages

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update:

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update - I was anxious to download the update to see if it addressed the sticky trackball problems and the low volume issue when using a blue tooth device. However, in the process of updating my BB Tour yesterday, the install stopped on the 8th out 12 updates. After a couple of 'retrys', the BB error message on the desktop came up which instructed me to: i) disconnect the device, ii) restart the computer. iii) restart the loading process and, iV) restore my data by loading the loader back-up file using Restore. Unfortunately my Tour was left without any software and the Desktop manager couldn't recognize it. The error message on the Tour was 503. Called Verizon Wireless tech and bottom line, the only fix is a new Tour, which they're sending me. Anyone else having issues with the update? Also, does it address the trackball and blue tooth issues?

I had issues with the trackball and had to have my Tour replaced. I was told this model does not have a removable trackball so the entire phone has to be replaced. My current one is working OK but does stick a bit. Seems to get worse over time. My wife's tour is newer and so far she is not experiencing the problem. Have not experienced a problem with the Blue Tooth volume.
I have another issue with this upgrade that I am wondering if anyone else has seen. My wife has the Tour as well. She was prompted to do the upgrade and went through it. It appeared to work except it blew out her Contact Alerts. When we put them back in we can no longer get the sound to play when she receives an SMS message in her holster. Vibration works but doesn't do any good when it is in her purse. Phones calls, calendar alerts, alarms all work in holster. As soon as we delete the contact alert the default SMS alert will play in the holster. If she takes her phone out of the holster the Contact alert will play. My phone is still running 4.7.1.40 and this function works fine. I am thinking about trying to put her's back to my version if possible but not sure the best way to go about this

Having multiple problems with script - NTFS Permissions and AD Groups

Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!

I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though.

Multiple problems with Mail

Here is the setup:
iMac Intel running 10.4.8
Mail 2.1.1
seperate user accounts, each with their own email address
email is valornet.com (local ISP), set up to download to Mail
Multiple problems with one of the user accounts (not affecting the others):
1. Multiple copies in the inbox of the same message. These are brand new, not a week old as some other threads have mentioned. When I go to Preferences/Accounts/Advanced I have already clicked the "Remove Now" button, also the "Remove copy from server..." is checked.
2. Mail will not stop retrieving new mail. The circle thing next to the Inbox on the left just keeps spinning, and spinning, and spinning...
3. Cannot quit Mail. Have to go in Activity Monitor and Force Quit.
4. My trash folder is gone.
If anyone can help me clean up this mess, I would appreciate it.

Verify/repair the startup disk (not just
permissions), as described here:
Th
e Repair functions of Disk Utility: what's it all
about?
Minor bitmap problem needed fixing; fixed.
Go to Apple Menu > System Preferences >
Network, choose Network Port
Configurations from the Show popup menu,
and make sure that the configuration used to connect
to Internet appears at the top of the list.
It was showing Bluetooth first and ethernet 2nd; I moved ethernet to the top.
In Mail, open Window > Activity Viewer. What
do you see Mail doing there? Actually, you may be
able to avoid having to force quit Mail by canceling
whatever it’s doing (by clicking on the red stop icon
of the activity).
"Fetching new mail
Fetching 5 of 5: updates on buses - Haskell Middle School"
blue bar is moving, red stop icon is bright. I clicked on the stop icon and it "grayed out" but Mail did not stop the spinning circle next to the inbox. Still had to force quit.
What are your Mail > Preferences > Accounts >
Mailbox Behaviors > Trash settings?
Trash can is back! One problem solved...
Do you have any Mail plug-ins or any system utilities
that could interfere with Mail? In the Finder, go to
each of the following folders (if they exist). What
do you see there?
/Library/InputManagers/
~/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/Mail/Bundles/
None of the above folders exist.
In the user's ~/Library/Mail/ folder (the user with the problems), she has:
DefaultCounts
Envelope Index
LSMMap2
MessageRules.plist
MessageRules.plist.backup
OpenedAttachments.plist
SmartMailboxes.plist
and the following folders:
Mailboxes
[email protected]
Signatures
The Mailboxes folder has two more folders inside:
Deleted Messages.mbox
Outbox.mbox
The POP-... folder has the following folders inside:
Deleted Messages.mbox
Drafts.mbox
INBOX.mbox
Sent Messages.mbox
and one file:
MessageUidsAlreadyDownloaded2
Incidentally, I now have 9 copies of the same email in my inbox and 7 copies of another. They are multiplying like rabbits!
Thanks for your help so far.
17" iMac (intel) Mac OS X (10.4.8)

Multiple problems with PSE10 Organizer

I have Photoshop Elements 10 that I am using with Windows XP with Service Pack 3, a Pentium 4 CPU with 3 GHz, 2 GB of RAM and 48.6 GB of free disk space. I have had multiple problems with Organizer since I started using it.
When I first got PSE10, I imported 8 years of my photos into one catalog in Organizer. I'm not sure how many images were included in this catalog but from what I've read, there's no limit to the number of images that can be placed in a catalog.
Question: Is there any limit to the number of images that can be put into one catalog?
Catalog A
Problem 1) People recognition didn't work. When I tried to find people for tagging, the feature didn't work. After researching the problem online, I found that others who had the same problem solved it by rebuilding the catalog a few hundred images at a time. I deleted the original catalog with all of my images and created a new catalog with just 800 images from this year. Then, people recognition worked, and I was able to tag people. The only other feature that I have used in Catalog A is that I have edited a few images to improve exposure. I have not rated images, stacked them, renamed them or created albums. With this catalog, the Organizer and the Editor still work together so when I select a photo in Organizer to fix, the Editor opens up with the photo for editing like it is supposed to do.
Catalog B
I created another catalog that had about 900 different images from a European tour. I deleted some of those images so there are now 760 images in this catalog. At first, all the Organizer features seemed to work fine in this catalog. I was able to pull photos from Organizer to fix in the Editor. I rated all the images, stacked and renamed some photos and created several albums under an album category.
Problem 2) A couple of days ago, the Organizer and the Editor stopped working together. Now, when I select a photo in Organizer and click on Fix, Edit, the Editor window comes up but the photo does not appear in Editor. The only way I can get an image into Editor is to pull it directly into Editor. Then, when I want to save it as a Version Set I have to choose File> Organize Open File in order to save the image as a version set.
Question: How do I get the Organizer & Editor to work together again?
Problem 3) The Exif data has disappeared on quite a few of the images in Catalog B even though the Complete radio button is highlighted under the Properties panel. Some of those images were never edited or re-saved.
Question: How do I get the Exif data back into Properties.
Problem 4) Yellow question marks continue to appear on the top left of some images even though these images have not been moved. The Organizer searches for the "missing file" and finds it quickly but why is it "missing"? I have gone through the albums in this catalog, completed the missing file searches on all the images so that no yellow question marks appear and when I go back to the catalog the next time I find the yellow question marks are there again!
Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
Problem 5) When I re-opened Catalog A with the general 2012 images, I got a message that my watched folder had new photos to import. When I clicked on ok, the next window brought up 3 photos that were already in Catalog B of my European tour that were taken in September. Somehow, the Date Created and the Dated modified had been changed from 9/12 to 11/12 so the Organizer thought they were new images when they were not.
Questions: Shouldn't the Date Created remain constant? The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
Both Catalogs
All of the images in both catalogs show creation dates that are later than the date modified, (example: date created of 6/12 and a date modified of 3/12).
Question: How is it possible that the date created is later than the date modified?

Hey Paysonite,
A lot of questions hmm!!! Let me try to answer few of them.
Question: Is there any limit to the number of images that can be put into one catalog?
Ans: No, you can import as many images in catalog you want. Just to add, as the size of catalog grows, Organizer's perfromance will be affected.
Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
Ans: As you mentioned in your comments, you have deleted some files (i assume from explorer). But these deleted files are still present in Organizer. Since the deletion happened outside the organizer, so Organizer is unaware of the deletion. So when organizer tries to read the files (which were deleted), Organizer is unable to find then and thus thinks that files are missing.
Questions: Shouldn't the Date Created remain constant? The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
Ans: Date created represents the date on which the files was created on your files system (or into OS). It is not date when the images was shot (actual shot date is Date time Original in Organizer).
Question: How is it possible that the date created is later than the date modified?
Ans: A simple way to do it is-Suppose you have an image which was brought/copied on July (i am explaining this with the help of month only. Assume date to be 1st and year to 2012). Now change the system date to August. Edit this image in Editor (without creating a version set for easy illustration). Now date created is July and date modified is Aug.
Copy this fine on flash drive/pen drive. Delete the original file from windows. Change the system date to Sept. Now copy the file in windows and see its properties. It has Date created as Sept and date modified as Aug, which answers you question.
I am unable to fully understand your remaining questions. Please elaborate.
Also please let me know if you need more info with above answers.
~Andromeda

Multiple Problems with Toshiba Satellite A505-S6980 laptop??

Hi,
We purchased the Toshiba Satellite A505-S6980 laptop at Best Buy about a week ago. However, we seem to be having multiple problems with it, that I wouldn't have expected from a brand new Toshiba.
Problems:
Whenever I'm in Mozilla Firefox browser, it crashes 90% of the time. Firefox was always my favorite on our previous computer, and still is, I just can't use it because it continually crashes.
In Outlook, whenever I try to open a message or reply, or basically any general command, it pops up an error message that says, "Could not install the custom actions," and then does whatever I'd wanted it too. It's a pain, as we do a lot of email and calendar through Outlook.
In Outlook, when I tried to import our Contacts, it says that we do not have the appropriate permissions to access the files. We are the only user account on this computer. We don't do seperate ones for each family member; we just turn on the PC.
It seems to me like the internet crawls on this computer. Every time we try to play a video (e.g. ABC, CNN, Youtube), it won't buffer. It just stops and starts all throughout the video about every 3 seconds. HUGE nuisance. We watch a lot of videos.
Minor issue: In Firefox, before it has crashed that is, on my old computer I used to be able to type "cnet" without the quotes into the address bar, and it would take me to www.cnet.com. If it couldn't find the page, it would take me to my default search engine's page (Yahoo) with the search results. On this one, if I type anything into the address bar (like search terms/keywords) it bring up search results with a My Start Incredimail search engine. I want my Yahoo search engine, and I want it to find the page if it can.
I cannot seem to get the Aero Flick (I think) to work. That was one of the main things I was looking forward to, but I can't figure out how to do it.
It seems to me like the Windows Explorer freezes a lot.
There have been multiple times when I'm typing that the keys don't work. Like I would have to press the A key about 10 times to get it to show up on the screen once. It's hit and miss and doesn't do it all of the time.
This isn't a problem - just a question. Is it best to leave the computer plugged in all of the time if it's stationary? Or once it's fully charged, should I unplug it and let the power run down, and then re-charge it?
**CLARIFICATION: It's not Outlook Express, it's Microsoft Office Outlook 2007. The one that you have to pay for. Surely it works with 7, considering it's Microsoft?!?!
If you can help me answer any of these problems/questions, I would really appreciate it.
Have a safe and Merry Christmas!

Yes, everything was fine with Firefox. However, I have uninstalled it, and am just using Internet Explorer for now.
Thanks for battery info...
I'm well within the return window, but overall really like the laptop. I've put a lot of time into it, and just want it to work right if possible.
Thanks for the info.
ScottinFla wrote:Concerning Firefox, have you checked your add-on list for any faulty plug-ins or extensions? Try disabling them and see what happens. Also, that search engine you mentioned may have somehow been installed on your machine. Have you checked the "Manage search engines..." window available from the search bar? Check your add-ons as well. You could always reinstall Firefox from scratch.
As for the battery, it may not be best to continually run down the battery - followed by a long charge. Once a month or so should be fine. Otherwise, just try to give the battery some exercise every now and then.
Are you still within the return window? Your unit may have a bad install, some bad RAM, or...
I have the same model and it works just fine.

Pls help me.i have a problem with WRT54G wireless router.

Dear all, Now i got face some problem with WRT54G wireless router.The problem is after i connect to the internet...the wireless will automatic drop..is that any ppl here got face this and got any solution to solve it...?thanks for sharing..

hi...logon to router's setup page and try changing channel to 11, go to advanced wireless settings, try changing transmission rate to 54Mbps, beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmwar on the router...check whether it maks any difference or not and let me know.

Multiple problems with iPhone 3GS ( 2yrs old)

The first problem involves my wifi connection. About half the time, my iPhone will just randomly disconnect from my wifi network which is usually about 10 feet away. If it is connected, I only receive 1 or 2 bars on on the screen while my MacBook Pro and other devices all have full strength (as would be expected when only 10 feet away). This makes using wifi on my iPhone incredibly slow. I have tried reseting network settings and all that, but with no success. Any suggestions?
Second, for about a month or two, my iPhone has been having serious problems connecting properly with iTunes wirelessly. I get a wide variety of error messages that include things about how I should connect my iPhone and restore it (tried that, didn't help), something about how it can't properly read the device, etc. While trying to connect to the iPhone, it sometimes causes iTunes to lockup and if I try to use wifi sync from my iPhone, it never finds my MacBook Pro. I also seem to be having problems getting the iPhone to backup to iCloud properly even when it is connected to wifi, plugged in to a power source, and locked (as it tells me to do on the iPhone) or if I try to force a manual backup. It just sits there telling me "Backing up...," but that bar never moves and it never gives an estimate of time remaining. I wouldn't be surprised if these issues were also related to the wifi issue above. Any suggestions for these problems?
I am afraid to ask, but is my iPhone on the way out? Thanks to all that help.

Regarding the wi-fi connection problem, if no change after resetting network settings on the iPhone and/or after restoring the iPhone with iTunes as a new iPhone or not from the iPhone's backup, the iPhone has a hardware problem with the wireless card or something else.

Window 8 WiFi problem with Cisco wireless network

Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
Sent from Cisco Technical Support iPad App

This problem occurred with Soney, and Dell models. Lenovo with Windows 8 factory installed is working fine.
Won't make any difference as these laptop's wireless NIC cards are different.
Can you try with OPEN authentication. If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
I'm with Scott here: It's got to be a wireless NIC card driver.
As what George has stated, post the debug of the failed attempts.

I'm having problems with a wireless Logitech mouse

Since upgrading to ML i'm having problems with a wireless Logitech mouse that worked well prior to the update. I'm using the current Logitech Control Center software. No other mouse software is on my Mac Mini. If I use a Guest Aacount the problems ( wheel and back button ) are not present. Any suggestions?

You might try the Logitech support site. There are communities on there:
http://www.logitech.com/en-us/support/keyboard-mice-combos
Here is a link to drivers:
Logitech Drivers
You might check your home folder/Library to see if you can find a Logitec .plist.
You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder "Go To Folder" command. Enter ~/Library. Delete the .plist(s) for the mouse.
If you prefer to make your user library permanently visible, use the Terminal command found below.
http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.

TS3048 I am having a problem with my wireless keyboard on my iMac

I am having a problem with my wireless keyboard on my iMac. Sometimes the keys seem to have a life of their own and I get a string of the same letter or symbol even though I only pressed the key once. Does anyone know how to rectify this?

Hello:
Try resetting the PRAM and SMC.
If that does not help, the KB is probably failing.
Barry

Problem with the wireless speed on windows with bootcamp

I've got a problem with the following:
the wireless card of my mac pro is very slow when i run windows on my mac pro with bootcamp
When i just run OSX everything works fine, but in windows, when I connect to the wireless my wireless speed
drops to 11-18mbs.
First I thought that it was a drivers issue, but after the update of bootcamp drivers 1.4 the problem still exist.
First I had a Topcom wireless router now I've bought a Apple Airport Extreme, but the problem isn't solved yet...
The router isn't 2 meters away from my mac.
And the wireless speed is fine when i connect with my dads windows laptop...
Does anyone has a solution? using a cable isnt a solution for me because in September I will move with my mac pro one floor down.

You might want to ask this in the Boot Camp forums. As your wireless work fine under Mac OS X it sounds to be a software issue as opposed to a hardware one which means as Windows users they'll better be able to help.

Multiple Problems with 4.2.1 update

Hi. I installed 4.2.1, and am experiencing multiple problems ever since.
1.) battery life is horrible I can fully charge it, and three or four hours later it is completely dead.
2.) wifi is wonky or, mostly, nonexistent
3.) ringtones vanished, and the default rings are barely-audible.
4.) I keep getting a random message that I need to sync my photos.
5.) Ipod volume seems to have gone down. I can crank my car stereo up all the way, and sometimes it's still not enough to hear my music.
I have a two year old, non-jailbroken 3GS which I run on a macbook, and I'm pretty good about updating itunes and iphone OS on a regular basis. I've searched at length to find fixes and am just at my wits' end. I loved this phone, at least pre 4.2.1 I did!
Any suggestions appreciated. Thanks!

Hi, Action.
Thanks very much for the well considered, thorough answer.
I got everything working again (though will see what the battery does today), and this is what I did. I'm not sure which thing worked.
1.) One blog I found suggested doing TWO hard resets in a row, which I did.
2.) I went to
settings
Safari
clear cookies/history/cache
and cleared them all, twice, to be sure.
3.) I went to
settings
reset
reset network settings
4.) I went to
settings
reset
reset all settings
5.) I deleted all my photos one by one (I had already saved everything I wanted to iPhoto), and discovered that (and I don't know if this is normal or not, but I had never noticed this before), one of my albums was "locked". This was an album of photos and jpgs I had tinkered with using various apps, Photogene, etc. I could view only. Couldn't delete or flick to resize anything in the album. When I synced my phone, I checked "sync photos" but made sure no album or other boxes were checked. This deleted the locked album, emptied my entire "Photos" app, and consequently removed the "sync photos" message I kept getting. I took a few test photos to doublecheck, and the message hasn't reappeared.
I note that this is not only making my camera open faster now, it's making it take photos faster, and darned if they aren't better resolution as well. I had noticed, but not connected with 4.2.1, that my photos were really grainy and poor quality lately.
6.) I did the opposite of what someone on this forum suggested. I always selected my one ringtone, which is what their suggestion was. I only have three, so when I synced, I selected "all", and it defaulted back to giving me a choice. My ringtone, btw, was a home made one, which I am very attached to. I spent hours researching how to salvage it, and thankfully, didn't have to get into figuring out how to change the extensions and length of the the thing as other forums suggested at terrifyingly great length.
Memos and email are also opening faster, and I have my fast wifi back again while at home.
It's kind of like a heart failure. I didn't realize I was getting slower and more winded, it was so gradual over the past few weeks. And now I've had a miracle recovery, and am ready to go run some sprints, lol.
Thanks very much for your suggestions and quick answer. I spent hours and hours researching my problems with 4.2.1 and my ringtones.

Multiple Problems with PDF InDesign, Bridge, and Acrobat Reader

I create proof books with a blend of Adobe Bridge & InDesign.
Here is my work flow: I will BOLD the errors I am having and need help with.
Step 1.) I create contact sheets in Bridge and save them as PDF's
Problem with Bridge ( I have another posting for this thread as well under Bridge) I cannot save PDF's larger than 400ish photos at 300ppi (important for my printer) without it saving as a blank PDF. COMPLETELY EMTPY! So I have to split up my photos into groups of 400 or less photos then patch them back together.
Problem with Acrobat: If I patch those PDF’s back together with Adobe Acrobat (a suggestion from another person on here) they save great but I get an error when I try to import them in indesign. The error reading: ERROR. Cannot determine page count.
Please open the PDF file in Acrobat, do a “Save As…” and try again. (99)
Step 2.) I use a script (MultiPageImporter2.2.1.jsx) to import the PDF's into Indesign. (if saved as one pdf in acrobat I get the above error)
Problem With InDesign: I run this importer script in InDesign to create my books with a template I use from my printers. Well since I have to import multiple pdf with multiple pages ( because I can’t piece them together without the above error. Then I have this problem:
I place a pdf with 1-226 pages in. I start this on page 1.
I place the next pdf with 1-141 pages in. I start this on page 227.
An error pops up that says I MUST start my import on page 226!!!!!!!!!! I don’t want to import on page 226 because I have two photos on that page!
I tried it several ways and no matter what I loose my last page of my first import.
PLEASE someone help me! I feel like I might be doing something really silly but I’ve spent 7.5 hours today working on this books with error after error.
I have done all the updates on my computers and nothing works. I use two macs and both have the same errors. I have a mac-book Pro | snow leopard and a Imac | snow leopard.
Thanks much!

All your problems seem to stem from the PDFs that you are making from Bridge. What you are describing should be perfectly possible, but the fact that Bridge doesn't want to make a PDF with more than 400 photos and it all goes downhill from there makes me suspect Bridge.
Here's a plugin that may help? Looks pretty cheap for what it does.
Apart from that I'd try to clean up the PDFs that Bridge is producing if Indesign doesn't like them. One way would be to print to a new PDF, after you've combined them as necessary.
As to the last pronlem you mention, where it forces you to place on page 226, have you tried creating a blank page 227 first, before you try placing?

HT3180 MY APPLE TV BEGAN IN A FAST BLINKING MODE. WHAT CAN I KNOW FROM THIS OTHER THAN THERE IS A "PROBLEM" OR, IS IT DUE TO A PROBLEM WITH MY WIRELESS NET GEAR ROUTER NOT SENDING THE SIGNAL ??

all of a sudden, I do not have internet connectivity. Checked all network settings and TV recognizes that a wireless network is operational. the internet signal to my imac is fine. what does the rapid flashing APPLE TV box indicated other than that there is a problem ??

The flashing light is indicative of a problem with the unit. I would connect to iTunes to restore
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

Multiple Problems With 8500 wireless

Similar Messages

Maybe you are looking for