Multiple Receiver tag using listTemplateId in Elements.XML - SP2013 EventHandlers

Hi,
We have a client requirement in our new SP 2013 site to copy sub site task items from individual Task lists to a common Custom list in parent site. For that we have created an Event Handler and added the logic for copying the task item to parent site
list in "itemAdded" event.
We have given <Receivers ListTemplateId="171"> in Elements.xml file and it works for normal task lists.
But it does not seem to work for task lists associated with workflows.
Kindly advice whether we can resolve the issue using the same elements.xml by adding additional <Receivers> tags.
Thanks in advance,
Nithya k pillai

You will have to remove workflow on subsite and then activate it on root site once the task is copied.

Similar Messages

Create XML element without closing tag using Visual C++

I know how to create xml element with closing tag (using WriteStartElement and WriteEndElement methods)
<tag id="1234">
</tag>
but is there a way in Visual C++ to produce xml element like this
<tag id="1234"/>
i.e. without closing tag?

Hi adamay,
Please refer to this thread.
http://stackoverflow.com/questions/8182245/create-xml-element-without-closing-tag-using-xslt
I think you could try the way of write your own class derived from XmlWriter.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Spec oversight? Using dynamic-attributes in XML tag files

I have a couple of tagfiles that generate form elements with specific conventions for the 'name' and 'value' attribute. Basically, a data binding framework.
Dynamic attributes are useful because you can delegate all the usual html attributes to the generated HTML form element: SELECT, INPUT, id, class etc.
The usual way to do this is to concatenate all the "pass-through" attributes to a string, and append this string to the element generated:
<input type="hidden" name="foo" ${dynattrs}/>I'm wondering how to do this in a tagfile in XML format (mytag.tagx), since the XML format forbids syntax like in the example above.
jsp:attribute won't help much, if it's nested inside a c:forEach: it won't apply to the right element.

Ran into the same problem with 'optional attributes'. (see post "JSP 2.0 Tag files outputting elements with conditional attributes" http://forum.java.sun.com/thread.jspa?forumID=45&threadID=681033)
Found a solution that is not very elegant but does work and saves you the trouble of reverting to Java Tags. Consider the following tag-file that outputs an html input-tag with conditional attributes:
<?xml version="1.0" encoding="utf-8"?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="1.2"
     xmlns:c="http://java.sun.com/jsp/jstl/core">
     <jsp:directive.attribute name="name" required="true" type="java.lang.String"/>
     <jsp:directive.attribute name="id" required="false" type="java.lang.String"/>
     <jsp:directive.attribute name="value" required="false" type="java.lang.String"/>
     <jsp:directive.attribute name="disabled" required="false" type="java.lang.Boolean"/>
     <jsp:directive.attribute name="hint" required="false" type="java.lang.String"/>
     <jsp:directive.attribute name="cssClass" required="false" type="java.lang.String"/>
     <jsp:text><![CDATA[<input type="text" name="]]><c:out value="${name}"/><![CDATA["]]></jsp:text>
     <c:if test="${!empty id}"><![CDATA[ id="]]><c:out value="${id}"/><![CDATA["]]></c:if>
     <c:if test="${!empty cssClass}"><![CDATA[ class="]]><c:out value="${disabled?(cssClass + '-disabled'):cssClass}"/><![CDATA["]]></c:if>
     <c:if test="${disabled}"><![CDATA[ disabled="disabled"]]></c:if>
     <c:choose>
          <c:when test="${!empty value}"><![CDATA[ value="]]><c:out value="${value}"/><![CDATA["]]></c:when>
          <c:when test="${!empty hint}"><![CDATA[ value="]]><c:out value="${hint}"/><![CDATA[" onfocus="if(this.value==']]><c:out value="${hint}"/><![CDATA[')this.value='';"]]></c:when>
     </c:choose>
     <jsp:text><![CDATA[/>]]></jsp:text>
</jsp:root>In answer to your question: Yes, it looks like an oversight. Using the jsp:attribute tag in a c:forEach doesn't work because the attribute is then applied to the forEach tag. You would have to put the attribute-tag inside a jsp:body tag (inside the forEach). Then it would apply not to the forEach tag but to the tag enclosing the forEach. However, this doesn't work either, or at least it doesn't work in Tomcat 5.5. Could be a bug though, JSP 2.0 is still very buggy (for instance, using a tagfile inside another tagfile from the same taglib doesn't seem to work either...)
Anyway, if you ever find a good solution please let me know by posting to this topic!
TIA

Can We Use Multiple Edgehero Classes On The Same Element?

Does anyone know if it is possible to add multiple Edgehero classes to the same element? More specifically, I would like to use RotateX and RotateY on a rectangle, but it only seems to do one or the other, adding both classes to the element doesn't make it rotate in both directions.

Maybe check out the Star Wars demo to see if that would help.
Rob got the idea from the one I made earlier and here is the code:
sym.$('gradient').css('background', '-moz-linear-gradient(top, rgba(0,0,0,1) 0%, transparent 100%)');
sym.$('container').css('-moz-transform-origin', '50% 100%');
sym.$('container').css('-moz-transform', 'perspective(250px) rotateX(25deg)');
// Chrome and others
sym.$('gradient').css('background', '-webkit-linear-gradient(top, rgba(0,0,0,1) 0%, transparent 100%)');
sym.$('container').css('-webkit-transform-origin', '50% 100%');
sym.$('container').css('-webkit-transform', 'perspective(250px) rotateX(25deg)');
// Internet Explorer
sym.$('gradient').css('background', '-ms-linear-gradient(top, rgba(0,0,0,1) 0%, transparent 100%)');
sym.$('container').css('-ms-transform-origin', '50% 100%');
sym.$('container').css('-ms-transform', 'perspective(250px) rotateX(25deg)');
and the orginal file before edgeHero;
https://app.box.com/s/068vx5x6lj5t2yydrx17

How to create a new aspx page in Pages library using Elements.xml without including any aspx page layout in my feature?

Is it possible to have the elements.xml file create a page in the Pages (or SitePages) library without actually including any sort of page layout or aspx artifact in the feature?
I see no reason to add a mywebpartlayout.aspx to my feature just so I can deploy a Home.aspx based on the BlankWebPart.aspx page layout.
I'm sure there is something obvious I am missing with regards to the Elements schema (which is why I've almost given up on using it completely and just gone to pure C#) but
I would really like to do this kind of simple stuff with declarations if at all possible. Must less code to write, debug, test and maintain.

I don't see how my question keeps getting misunderstood. This seems to be very clear and clearly not answered: "Is it possible to have the Elements.xml file
create a page in the Pages (or SitePages) library without actually including any sort of page layout or aspx artifact in the feature?"
I can't be more clear than "without including ANY sort of page layout or aspx artifact (meaning anything ending in aspx) IN THE FEATURE". I am not capitalizing to yell,
only to emphasize. Your disagreement is based on a link that shows ADDING AN ARTIFACT (the dummy MyPage.aspx) to a feature. I am asking if it
is possible (again, I cannot be more clear) to just use an Elements.xml file to instruct SharePoint to make a new item in a Pages or SitePages library.
Your definition of page includes Page Layouts and what you call Web Part Pages (again, a type of page layout + data in a site pages list that says what webparts
to display). Page Layouts are clearly NOT items stored inside of a SitePages or Publishing Pages library. Those libraries are just lists whose records
define the parts to show inside a specific layout.
When I refer to a Page I mean an entry into a pages (site pages/publishing pages) list. If I wanted to deploy a page layout then, quite obviously, I would need
to include it into my solution. I think maybe you are assuming that I do not know the difference. I do. The question is, can an Elements file alone be enough to instruct SharePoint to make a new entry into a Pages or SitePages library.
Now, your second link does show how to reference an existing Page Layout. Thank you for that. It is excellent. But this still leaves the problem of having to
add some sort of aspx page into the solution. Let me try to explain why I feel this SHOULD BE unnecessary: The aspx file will not have anything on it if I am referring to the ~sitecollections/.../BlankWebPartPage.aspx layout.
All web parts and content that should appear on the new page can be described IN the Elements.xml file. Any sort of aspx file is unnecessary, it seems to me.
So, if I am referencing a ~sitecollections/.../BlankWebPartPage.aspx page layout and specifying the web parts to add to the page, why should there be a
requirement to have some aspx file within the feature? That's what I am trying to figure out.
I am not asking for source code as proof. I am asking for an Elements file that does NOT reference anything AT ALL inside the Visual Studio solution for reasons I just described.
If you do not know how to do it then perhaps it cannot be done but I would like the question to stay unanswered for a little while until someone can demonstrate either a) it CAN
be done or b) a link to some Microsoft document stating that it is MANDATORY to have a physical element within the feature that gets copied to the environment.
I think it is important to understand what is being asked before insisting you have answered. It is clear from your posts that you have not fully understood the question yet but
I am hoping this posts makes it clear. I really appreciate you taking the time to respond, though. You seem to be the only one up for the challenge! :)

Same idoc to multiple EDI receiver system using rule

Dear Friends!
Good day! I am using desadv.delvry03 idoc and I want to send same idoc from same communication component to multiple receiver parties without mapping.
I have created first scenario successfully using idoc, when I create another scenario it gives me message like "Object already exist" . for that I have to use Service interface. I dont want to use service interface for this purpose. In my scenarios mapping is not even required. one idoc to and multiple receivers thats it.
Can you please guide me how to do the above requirement ?
your any help will be appreciated greatly
Thanking you
Regards
Dipen

Hi,
For this... U can create 1 sender agreent for that idoc if necesseary....otherwise we dont required IDOC sender Agreement.
Then Create 1 reciver determination in that u can mention the 2 recivers details...
same thing for interface determination also.
and finally create 2 reciver agreement and 2 reciver communication channels for 2 systems.
Let me know if you require any further information.
Thanks,
Sreenivas

I want to use a gray card shot in ACR to multiple photos. Poss into the Elements or only in PS?

I want to click the grey card photo in ACR 7.3. of Elements, an then apply it to multiple Photos there.
Is that possible in Elemements or only in Photoshop's ACR?

Thanks, but just this it was I‘d done – to click my RAW files, select open in Windwos Explorer – and ACR opens – but only with first selectet file. I’m missing the fim stripe on the left site….thats the Problem. All selected files are imported into ACR, but I only see the full size image of the at first selectet file. Breaking the prozess…I see one after the other selectet filed disappearing . The were open, but not shown as a filstripe…that’s the problem
Von: ukgaurav [email protected]
Gesendet: Freitag, 11. Januar 2013 09:52
An: [email protected]
Betreff: I want to use a gray card shot in ACR to multiple photos. Poss into the Elements or only in PS?
Re: I want to use a gray card shot in ACR to multiple photos. Poss into the Elements or only in PS?
created by ukgaurav <http://forums.adobe.com/people/ukgaurav> in Photoshop Elements - View the full discussion <http://forums.adobe.com/message/4985562#4985562

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

Any possiblity to use single Inbound Service Interface with multiple Receiver Agreements

Hi All,
Scenario: PROXY to FILE.
Requirement is to receive to two locations.
Is it possible to use single Inbound interface with multiple Receiver Agreements. I tried using two operation in the Inbound Service Interface, and Operation Specific in Determination. But couldnt proceed further. Do I need to use seperate Service Interface for two receiver locations?
Please suggest some solution.

Hi Naveen,
There is a possibility but in the case in the same server location with dynamic configuration: Placing file in two different directories using single receiver communication Channel
With different location you would need to develop a new adapter module as Amit Srivastava explains and develops here Send File to Two Different Locations using Adapter Module
Regards.

BPEL - multiple receive elements for same partner/operation

Is it possible to have more Receive elements for same operation in one BP? I need to create a business process for approving requests in a number of steps. The process looks like this:
RECEIVE (createRequest)= INVOKE (...)
< REPLY (createRequest)
RECEIVE (approveRequest)= INVOKE (...)
< REPLY (approveRequest)
RECEIVE (approveRequest)= INVOKE (...)
< REPLY (approveRequest)
(...)The creation and first recieve element for "approveRequest" is ok, but the others are never executed. I believe the correlation sets are set correctly. I also can't use a While element since every step could be a bit different. If I substitute the other recieves for different operations, the whole process executes correctly.
Can someone please advice me on what i am doing wrong? If it's somehow not possible to have more then one Recieve for a particular message in one BP, what is the best way to do it differently?

Thank you for your answer. I tried to change the Receive elements to Pick + OnMessage, but it's not working either. It goes past the first one but it never reaches the second one. That's what i had in the first place - two Pick elements after each other, each with an 'approve' and 'dispprove' branch, but it didn't work so I simplified it to an easier process with just receive elements.
If it's working for you, do you do something special in the process? Which version of OpenESB are you using? Would it be possible for you to send the BPEL file? Here is a part of mine I've just made to test this solution.
<bpws:pick name="Pick1">
    <bpws:onMessage partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemIn5">
        <bpws:correlations>
            <bpws:correlation set="orderItemId" initiate="no"/>
        </bpws:correlations>
        <bpws:sequence name="Sequence2">
            <bpws:assign name="Assign7">
                <bpws:copy>
                    <bpws:from>true()</bpws:from>
                    <bpws:to part="return" variable="ApproveOrderItemOut4"/>
                </bpws:copy>
            </bpws:assign>
            <bpws:reply name="Reply3" partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemOut4"/>
        </bpws:sequence>
    </bpws:onMessage>
</bpws:pick>
<bpws:pick name="Pick2">
    <bpws:onMessage partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemIn6">
        <bpws:correlations>
            <bpws:correlation set="orderItemId" initiate="no"/>
        </bpws:correlations>
        <bpws:sequence name="Sequence1">
            <bpws:assign name="Assign6">
                <bpws:copy>
                    <bpws:from>true()</bpws:from>
                    <bpws:to part="return" variable="ApproveOrderItemOut3"/>
                </bpws:copy>
            </bpws:assign>
            <bpws:reply name="Reply2" partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemOut3"/>
        </bpws:sequence>
    </bpws:onMessage>
</bpws:pick>

How to use Euro symbol in xml tags?

How to use Euro symbol in xml tags?

What do you mean by "in xml tags"? Can you post a three-line XML snippet showing what you hope to achieve?

If we want to transfer data to multiple receiver using context object, how

If we want to transfer data to multiple receiver using context object, how many receiver determinations we need to create?

Hi Chiru,
Just go thro' the below links for sending data to multiple receivers:
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
Conditions in Receiver Determination
I hope this helps.
Regards.
Praveen

Reading jsp tag using xml

Hello friends,
I have a problem.
I have a jsp page in that i have to find a particular tags. using xml
but i dont know about dtd and. please help me
example.
<input type ="text" value= "ss">
now i want to find the above tag using xml
so please give me the logic how to find a tag in jsp using xml. ?
please help me.

A JSP is for displaying data. Read after me:D-I-S-P-L-A-Y-I-N-G. It has no business parsing or
reading or calculating anything.
I don't know what the OP want's to do. Maybe he
want's to write a application which replaces some
html tags in JSP files.
His post can also be interpreted that he want's to
use JavaScript (DOM)) to find any particular tag.Hello,
my problem is in our application some programmers have written hardcode in <intput tag> like <input type name ="hardcode" instead taking values from database dictonary.
so now i have to find the line no. where they have written the hard code.
for that my pl is asked to solve using dom.
for that i need to find the html tags.
but i m not able to do that.
can u suggest me.
Regards

Using Content Query webpart for specific Document library with multiple managed metadata - Document with multiple metadata tags not showing up

Hi,
I am having an issue where when I insert a Content Query webpart into a page, and filter to managed metadata, all the right documents show up except one document that happens to have two metadata tags attached to it. The content query webpart is set
to only look through a specific document library. I'm not sure what I am doing wrong.
Here is the one document with two metadata tags:
Below is the Content Query:

Hi,
As I understand, you did not get the results with multiple metadata tags through Content Query web part in SharePoint 2013.
Check things below:
1. Check if you have set the item limit more than the display items in Presentation section of the web part. If the item number more than item limit, the rest items will not show.
2. Check if the item you cannot find uses the content type you have set in the content type section of content query web part.
When you edit the properties of the item, you will see the content type the item is using.
Best regards
Sara Fan
TechNet Community Support

XML:selecting the value of a xml tag using plsql

Hi,
I have a table xx_table with one of the column xx_column which is of type XMLTYPE.I inserted the xml data into this column with xml data as below.
<userComments xmlns:ns1="http://xmlns.oracle.com/XXXX_AccountDistribution"
xmlns="http://xmlns.oracle.com/XXXXX_AccountDistribution">
<task:userComment
xmlns:task="http://xmlns.oracle.com/bpel/workflow/task">
<task:comment>*********** Rejecting invoice **********</task:comment>
<task:updatedBy>
<task:id>r</task:id>
<task:displayName></task:displayName>
<task:systemVersionFlag></task:systemVersionFlag>
</task:updatedBy>
<task:updatedDate>2010-05-19T14:09:15-07:00</task:updatedDate>
<task:displayNameLanguage></task:displayNameLanguage>
<task:action></task:action>
<task:systemVersionFlag></task:systemVersionFlag>
</task:userComment>
</userComments>
My question ,how do i select the value of the tag "comment" from the above xml data using plsql? Can we write a query to select the value of the tag "comment" to fetch "*********** Rejecting invoice **********" as value.
Regards,
Sandeep

If you have rights to modify tabular model then, you can create a measure in your Tabular model which returns previous week and then use this measure in Pivot Table.
Thanks,
Sagar K
(Blog: http://datamazik.blogspot.in/)

Multiple Receiver tag using listTemplateId in Elements.XML - SP2013 EventHandlers

Similar Messages

Maybe you are looking for